Lucky1234 Posted April 17, 2023 Share #151 Posted April 17, 2023 2 hours ago, SSS_Viva said: If you have connected the USB DOM and made a copy of it, then it is working. You need to check on another power supply, check the BIOS, if you have an Intel Atom, then it may be affected by the С2000 problem. Thank you for the tip. Power should be fine. The problem with the processor also occurred to me, but unfortunately I did not find on the Internet which pins should be. I found only instructions on the DS415+ board and it is quite different. Thanks again. Quote Link to comment Share on other sites More sharing options...
SSS_Viva Posted April 17, 2023 Share #152 Posted April 17, 2023 1 час назад, Lucky1234 сказал: Thank you for the tip. Power should be fine. The problem with the processor also occurred to me, but unfortunately I did not find on the Internet which pins should be. I found only instructions on the DS415+ board and it is quite different. Thanks again. Did you find how to connect to the terminal? Quote Link to comment Share on other sites More sharing options...
Lucky1234 Posted April 17, 2023 Share #153 Posted April 17, 2023 1 hour ago, SSS_Viva said: Did you find how to connect to the terminal? no no. Where to connect TTL I would find. But I do not know to connect the resistor to repair the processor. Quote Link to comment Share on other sites More sharing options...
SSS_Viva Posted April 17, 2023 Share #154 Posted April 17, 2023 2 минуты назад, Lucky1234 сказал: no no. Where to connect TTL I would find. But I do not know to connect the resistor to repair the processor. Your processor doesn't seem to be affected by the C2000 problem. Therefore, it is better to connect via TTL Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted April 17, 2023 Share #155 Posted April 17, 2023 4 hours ago, SSS_Viva said: Wenn Sie das USB-DOM angeschlossen und eine Kopie davon erstellt haben, funktioniert es. Sie müssen nach einem anderen Netzteil suchen, das BIOS überprüfen, wenn Sie einen Intel Atom haben, dann ist es möglicherweise vom С2000-Problem betroffen. no Quote Link to comment Share on other sites More sharing options...
SSS_Viva Posted April 17, 2023 Share #156 Posted April 17, 2023 1 минуту назад, DSfuchs сказал: no Yes, I wrote above that this processor is not affected by the C2000 problem. Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted April 17, 2023 Share #157 Posted April 17, 2023 It's all 0% related. If you want to destroy the hardware, please continue. Quote Link to comment Share on other sites More sharing options...
SSS_Viva Posted April 17, 2023 Share #158 Posted April 17, 2023 1 минуту назад, DSfuchs сказал: It's all 0% related. If you want to destroy the hardware, please continue. Now the most correct thing is to connect using the terminal and see what is displayed there. Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted April 17, 2023 Share #159 Posted April 17, 2023 1 minute ago, SSS_Viva said: Yes, I wrote above that this processor is not affected by the C2000 problem. But all three are wrong! Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted April 17, 2023 Share #160 Posted April 17, 2023 (edited) Try rebooting with the new files first. Either the files are on the DoM corrupted, or the DoM is going through an aging process. Then it is possible that the connection is initially reduced to USB1.0, until at some point it no longer works at all. The last resort for a bridging time then, would be to try a thermal method and put the module in the freezer for a few hours. Edited April 17, 2023 by DSfuchs 1 Quote Link to comment Share on other sites More sharing options...
SSS_Viva Posted April 17, 2023 Share #161 Posted April 17, 2023 16 минут назад, DSfuchs сказал: But all three are wrong! What did I say wrong? The 412+ has an Intel Atom D2700 processor and is not affected by the AVR54 issue. click Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted April 17, 2023 Share #162 Posted April 17, 2023 Sorry, that's nonsense. Also, the device would not blink. Quote Link to comment Share on other sites More sharing options...
SSS_Viva Posted April 17, 2023 Share #163 Posted April 17, 2023 1 минуту назад, DSfuchs сказал: Sorry, that's nonsense. Also, the device would not blink. Apparently we don't understand each other. 1 Quote Link to comment Share on other sites More sharing options...
Lucky1234 Posted April 17, 2023 Share #164 Posted April 17, 2023 Thank you very much for your advice. First I try to copy the files and then try the TTL connection. I will put the post when I have the results. Thank you 1 Quote Link to comment Share on other sites More sharing options...
Lucky1234 Posted April 17, 2023 Share #165 Posted April 17, 2023 Hello. Copying method of 4 files does not work. And the connection of the TTL to the console also without success, even though it is clear that communication was bound. The DS 412+ flashes blue and also flashes the LAN light, but it does not appear on the LAN network. IMG_4910.MOV Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted April 17, 2023 Share #166 Posted April 17, 2023 (edited) Beginnen Sie ohne Festplatten, sonst müssen wir noch mehr Dateien austauschen. Changing the display EFI<=>Legacy. Edited April 17, 2023 by DSfuchs Quote Link to comment Share on other sites More sharing options...
Lucky1234 Posted April 17, 2023 Share #167 Posted April 17, 2023 23 minutes ago, DSfuchs said: Beginnen Sie ohne Festplatten, sonst müssen wir noch mehr Dateien austauschen. Changing the display EFI<=>Legacy. yes i run synology without hard drives. I'll admit that I'm getting lost now. How do I switch EFI---> Legacy if nothing works? Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted April 17, 2023 Share #168 Posted April 17, 2023 (edited) The thought of this change was worth nothing here. I somehow still had vga on the screen, it's serial. The TTL output seems to have incorrect communication settings. Does the DoM run on the PC with USB2.0? If so, I would suggest swapping more files. Edited April 17, 2023 by DSfuchs 1 Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted April 17, 2023 Share #169 Posted April 17, 2023 Did you set your Com Putty to: 115200 8 1 None XON/XOFF 1 Quote Link to comment Share on other sites More sharing options...
Lucky1234 Posted April 17, 2023 Share #170 Posted April 17, 2023 5 minutes ago, DSfuchs said: Did you set your Com Putty to: 115200 8 1 None XON/XOFF yes, USB - DOM works on PC, backup worked too. I will wait for the new USB DOM to arrive from China and make a clone of the original. In the meantime, I'll try to get TTL communication working. Thank you for your patience. Yes, the communication was set up exactly as you write, several transmission speeds were tested and tested on two PCs with the same result. Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted April 17, 2023 Share #171 Posted April 17, 2023 (edited) Does your "USB DOM from China" report 0xf400/0xf400? If not, send me a PM when it is needed. If the DoM is properly connected via USB2.0 protocol , then it is ok. Edited April 17, 2023 by DSfuchs 1 1 Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted April 17, 2023 Share #172 Posted April 17, 2023 (edited) I would send the other files when I get that ok for USB2.0. If you have USB1.0, then put the DoM over night in the freezer. I can then do nothing more, China will not help. Edited April 17, 2023 by DSfuchs 1 Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted April 17, 2023 Share #173 Posted April 17, 2023 (edited) Last questions, is one of the following assistant version definitely running? https://archive.synology.com/download/Utility/Assistant/6.2-24922 Does the saved image from the DoM run on another synology device? Otherwise I can check it when it's uploaded somewhere. Edited April 17, 2023 by DSfuchs 1 Quote Link to comment Share on other sites More sharing options...
7up_ Posted April 18, 2023 Share #174 Posted April 18, 2023 (edited) On 4/16/2023 at 2:17 PM, Bossman said: how do i clone usb flash dome ? where did you buy such usb dome ? You can buy USB DOM, just do an internet search. As DSfuchs mentioned, you will need to flash the DOM to change VID/PID to F400 to allow it to boot. Most of the USB DOMs sold have the wrong size female socket. You will need basic SMT soldering skills to remove the socket and replace it with a standard mini USB female socket so that it matches the one used on the Synology USB DOM. Of course this can all be avoided by using an external USB thumb drive with correct VID/PID. Edited April 18, 2023 by 7up_ 1 Quote Link to comment Share on other sites More sharing options...
Lucky1234 Posted April 18, 2023 Share #175 Posted April 18, 2023 This is the original synology USB DOM, I am still waiting for the replacement DOM. I have ordered a DOM with a UT 165 chip, so it shouldn't be a problem to change the VID/PID. Today I will do some experiments and try to get the TTL communication working correctly. Unfortunately, there is no possibility to test DOM in another NAS device. Replacing the connector using soldering will not be a problem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.