Peter Suh Posted October 8, 2023 Share #2426 Posted October 8, 2023 11 minutes ago, wjz304 said: Would it be better as a backup? What do you think? The software for simply writing disks on the PC side is already very rich It would be nice if both backup/restore and simple new loader recording were possible. I know that there are many disk utilities available on the PC side. This feature was considered in terms of user convenience. TCRP seems to be more free than the ttyd environment because Tinycore uses a separate kernel. Is it possible to unmount a busy partition that is currently being used by the loader? In the case of TCRP, the 3rd partition cannot be unmounted. If only this were possible, backup and restore would be possible. Quote Link to comment Share on other sites More sharing options...
BullFrog Posted October 8, 2023 Share #2427 Posted October 8, 2023 I bought an Intel N6005 board from TopTon on aliexpress, and installed Proxmox 8.0.3. I have 2 VMs Synology and Home Assistant, both got 4 cores to maximise performance (4 core total). I have 16gb ram, 8gb for Synology and 4gb for Home Assistant without ballooning, 4gb for proxmox. Randomly I get this error message: Synology was shut down improperly and softreboot itself, Proxmox shows no errors. Reinstalled Proxmox completely and tried to leave everything on default and even tried other Synology loaders and switched from 923+ to 920+ with the same error. DSM shows nothing useful in error logs and same goes for Proxmox. Read this topic that someone had similar problem with Intel N5005 but that was for Proxmox 7 (kernel 5.x) but Proxmox 8 has kernel 6.2 already, so I can't really update it. The VM does not freeze but the DSM inside shuts down. The CPU is around 55-60°C and 20-40% load because of Frigate in Home assistant, I also use Coral AI TPU in my NVME slot. Quote Link to comment Share on other sites More sharing options...
wjz304 Posted October 8, 2023 Share #2428 Posted October 8, 2023 (edited) 12 minutes ago, BullFrog said: I bought an Intel N6005 board from TopTon on aliexpress, and installed Proxmox 8.0.3. I have 2 VMs Synology and Home Assistant, both got 4 cores to maximise performance (4 core total). I have 16gb ram, 8gb for Synology and 4gb for Home Assistant without ballooning, 4gb for proxmox. Randomly I get this error message: Synology was shut down improperly and softreboot itself, Proxmox shows no errors. Reinstalled Proxmox completely and tried to leave everything on default and even tried other Synology loaders and switched from 923+ to 920+ with the same error. DSM shows nothing useful in error logs and same goes for Proxmox. Read this topic that someone had similar problem with Intel N5005 but that was for Proxmox 7 (kernel 5.x) but Proxmox 8 has kernel 6.2 already, so I can't really update it. The VM does not freeze but the DSM inside shuts down. The CPU is around 55-60°C and 20-40% load because of Frigate in Home assistant, I also use Coral AI TPU in my NVME slot. cpu used the host Edited October 8, 2023 by wjz304 Quote Link to comment Share on other sites More sharing options...
wjz304 Posted October 8, 2023 Share #2429 Posted October 8, 2023 15 minutes ago, Peter Suh said: It would be nice if both backup/restore and simple new loader recording were possible. I know that there are many disk utilities available on the PC side. This feature was considered in terms of user convenience. TCRP seems to be more free than the ttyd environment because Tinycore uses a separate kernel. Is it possible to unmount a busy partition that is currently being used by the loader? In the case of TCRP, the 3rd partition cannot be unmounted. If only this were possible, backup and restore would be possible. It should be possible to uninstall, as long as you don't do any other operations after uninstalling, and restart directly after restore/backup. Quote Link to comment Share on other sites More sharing options...
BullFrog Posted October 8, 2023 Share #2430 Posted October 8, 2023 2 hours ago, wjz304 said: cpu used the host it is set to "host" from the start, but it is SeaBios (every guide set that SeaBios) can this be a problem? (now I test 2 cores for Synology and 2 cores for HomeAssistant) Quote Link to comment Share on other sites More sharing options...
wjz304 Posted October 8, 2023 Share #2431 Posted October 8, 2023 30 minutes ago, BullFrog said: it is set to "host" from the start, but it is SeaBios (every guide set that SeaBios) can this be a problem? (now I test 2 cores for Synology and 2 cores for HomeAssistant) SeaBios is also available, Is the model q35? Quote Link to comment Share on other sites More sharing options...
wjz304 Posted October 8, 2023 Share #2432 Posted October 8, 2023 Quote Link to comment Share on other sites More sharing options...
BullFrog Posted October 8, 2023 Share #2433 Posted October 8, 2023 25 minutes ago, wjz304 said: SeaBios is also available, Is the model q35? it is the default i440Fx, does it matter? Watched 3-4 guides on youtube, all of them used i440fx and only Home assistant used q35 Quote Link to comment Share on other sites More sharing options...
iancilos Posted October 8, 2023 Share #2434 Posted October 8, 2023 (edited) @wjz304 please could you give me some values to try? I tried and the disk is always seen as internal n17 or it is not detected as internal. I would like to try to show it as n1, maybe it solves the dmesg problem that I attached before. Thanks for your help Edited October 8, 2023 by iancilos Quote Link to comment Share on other sites More sharing options...
wjz304 Posted October 8, 2023 Share #2435 Posted October 8, 2023 1 hour ago, BullFrog said: it is the default i440Fx, does it matter? Watched 3-4 guides on youtube, all of them used i440fx and only Home assistant used q35 it is recommended to use q35. The compatibility of q35 is better. Quote Link to comment Share on other sites More sharing options...
wjz304 Posted October 8, 2023 Share #2436 Posted October 8, 2023 26 minutes ago, iancilos said: @wjz304 please could you give me some values to try? I tried and the disk is always seen as internal n17 or it is not detected as internal. I would like to try to show it as n1, maybe it solves the dmesg problem that I attached before. Thanks for your help Oh, sorry for my misunderstanding, you need to set DiskIdxMap and SataPortMap Quote Link to comment Share on other sites More sharing options...
Ebbuz Posted October 9, 2023 Share #2437 Posted October 9, 2023 Hi everybody, I have this problem: the PC turns on, boot without problems, it gives me the IP address but I can't ping it or access it via ssh and I don't know why. it worked until yesterday. Screenshot: https://ibb.co/k2SJrQx Quote Link to comment Share on other sites More sharing options...
ULSY Posted October 9, 2023 Share #2438 Posted October 9, 2023 (edited) Hi, does your loader support also DELL Server with 4x6TB Seagate SAS Drives, as RAID5, PERC H710 Mini (Embedded) Raid Controller ? I get "No Drives detected" issue. I try it also with DS3622xs+ but unfortunatelly, I get the same issue. Edited October 9, 2023 by ULSY Quote Link to comment Share on other sites More sharing options...
mgrobins Posted October 10, 2023 Share #2439 Posted October 10, 2023 7 hours ago, ULSY said: Hi, does your loader support also DELL Server with 4x6TB Seagate SAS Drives, as RAID5, PERC H710 Mini (Embedded) Raid Controller ? I get "No Drives detected" issue. I try it also with DS3622xs+ but unfortunatelly, I get the same issue. When I was having this issue it was due to the incorrect driver for my SAS card being called. See the thread in my signature for what I did - it's a bit out of date now but perhaps the device drivers are the issue for yours in the same way. Quote Link to comment Share on other sites More sharing options...
mgrobins Posted October 10, 2023 Share #2440 Posted October 10, 2023 On 9/22/2023 at 8:19 AM, Peter Suh said: I looked for more reviews of the x540-T2. At first, there were only failure reviews, but since then there have been more success stories. It is not clear whether everyone was successful in temporarily removing x540-T2. At the center of this problem is the proper maintenance of the ixgbe vanilla module built into DSM. The ixgbe module compiled by popopico must be excluded. Peter my Supermicro board uses the x540-T2 and I have no problems with your loader. I'm curious - I wonder if the fellow I wrote to above this comment who has "No disks FOund" has the same problem I did where the incorrect ixgbe module was preventing the mpt3 module loading properly. Quote Link to comment Share on other sites More sharing options...
mgrobins Posted October 10, 2023 Share #2441 Posted October 10, 2023 I am requesting assistance with a problem. How do I get all of my onboard SATA ports to not overlap/conflict with my HBA ports? Having all SATA drives connected to my HBA (LS9211-8i) when onboard SATA ports are enabled results in 2 drives not being visible in DSM. It seems some of the ports overlap or conflict. I have been doing a lot of fiddling with the settings in /etc.defaults/synoinfo.conf (maxdisks, esata, internalportcfg and USBportcfg). I don't seem to see any real changes when I alter these variables. I ran DMESG earlier today to see what ports are being recognised and to attempt to resolve this. I *think* I need to correct user_config.json but I do not understand the Diskid, portmap and other variables that I have seen mentioned around this topic. I'd be delighted if someone can explain a solution or offer some tuition/ a link to a tutorial. I've never quite got my head around it in the past. dmesg.txt Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 10, 2023 Share #2442 Posted October 10, 2023 1 hour ago, mgrobins said: Peter my Supermicro board uses the x540-T2 and I have no problems with your loader. I'm curious - I wonder if the fellow I wrote to above this comment who has "No disks FOund" has the same problem I did where the incorrect ixgbe module was preventing the mpt3 module loading properly. It would be easier to explain if there was a sample of the /var/log/linuxrc.syno.log log file from Junior mode (DSM Pat file installation stage), which had this problem in the past. Let me explain without it first. In the case of TCRP, the steps of loading the device module *.ko file related to the device and loading other addons are processed at once. If a problem occurs in even just one module or addon during this process, the processing process is stopped and an error code is returned. If an error code is returned, it means that it has become difficult to proceed with normal installation in Junior mode. Everything is logged in /var/log/linuxrc.syno.log. If a problem occurs while loading the ixgbe.ko module as you asked, there is a possibility that the processing of the mpt3sas.ko module, which is processed in alphabetical order, has not progressed and stopped. Quote Link to comment Share on other sites More sharing options...
mgrobins Posted October 10, 2023 Share #2443 Posted October 10, 2023 46 minutes ago, Peter Suh said: It would be easier to explain if there was a sample of the /var/log/linuxrc.syno.log log file from Junior mode (DSM Pat file installation stage), which had this problem in the past. Let me explain without it first. In the case of TCRP, the steps of loading the device module *.ko file related to the device and loading other addons are processed at once. If a problem occurs in even just one module or addon during this process, the processing process is stopped and an error code is returned. If an error code is returned, it means that it has become difficult to proceed with normal installation in Junior mode. Everything is logged in /var/log/linuxrc.syno.log. If a problem occurs while loading the ixgbe.ko module as you asked, there is a possibility that the processing of the mpt3sas.ko module, which is processed in alphabetical order, has not progressed and stopped. That makes sense. I was thinking back to my initial effort working with you on my.sh where my drives were not found and we were suspicious that the mpt3sas was not loading properly (which it wasn't) and coincidentally ixgbe was not working and blocking it. I wondered if the person in this thread "Ulsy" may have the same issue with his HBA not showing his disks. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 10, 2023 Share #2444 Posted October 10, 2023 (edited) 50 minutes ago, mgrobins said: That makes sense. I was thinking back to my initial effort working with you on my.sh where my drives were not found and we were suspicious that the mpt3sas was not loading properly (which it wasn't) and coincidentally ixgbe was not working and blocking it. I wondered if the person in this thread "Ulsy" may have the same issue with his HBA not showing his disks. DS3617xs (Broadwell, 10GbE option) and DS3622xs+ (Broadwellnk) include Intel 10Gb NIC in SYNO original hardware. https://global.synologydownload.com/download/Document/Hardware/DataSheet/DiskStation/17-year/DS3617xs/enu/Synology_DS3617xs_Data_Sheet_enu.pdf https://www.synology.com/en-us/products/DS3622xs+#specs In order to operate this correctly, there is already a built-in ixgbe.ko. This module is called vanilla. There is a separate ixgbe.ko developed separately by Redpill. Overriding the vanilla module and using this module instead will cause problems. So, when creating an integrated pack for the two platforms, Broadwell and Broadwellnk, I overwrite the existing Redpill module with this vanilla module. https://github.com/PeterSuh-Q3/arpl-modules/tree/main/vanilla/broadwell-4.4.302 https://github.com/PeterSuh-Q3/arpl-modules/tree/main/vanilla/broadwellnk-4.4.302 I discussed this with @wjz304 quite a while ago. So, I emphasized that this is something that must be applied to ARPL-i18n. If you extract ixgbe.ko from my module integration pack, it is a vanilla module. https://github.com/PeterSuh-Q3/arpl-modules/releases/tag/v1.61 If ixgbe.ko extracted from ARPL's module integration pack is also a vanilla module, the size must be the same. https://github.com/wjz304/arpl-modules/releases/tag/23.9.5 The first person to guide how to handle it this way was @fbelavenuto, the owner of this topic and the founder of ARPL. p.s: I have now extracted and compared the size of Broadwell-4.4.302's ixgbe.ko, which is 415,667 bytes, which is the same for both. I think we need to look for the cause again. To check the log in ARPL, don't you need to add the dgbutils addon separately? Edited October 10, 2023 by Peter Suh 1 Quote Link to comment Share on other sites More sharing options...
mgrobins Posted October 10, 2023 Share #2445 Posted October 10, 2023 57 minutes ago, Peter Suh said: DS3617xs (Broadwell, 10GbE option) and DS3622xs+ (Broadwellnk) include Intel 10Gb NIC in SYNO original hardware. https://global.synologydownload.com/download/Document/Hardware/DataSheet/DiskStation/17-year/DS3617xs/enu/Synology_DS3617xs_Data_Sheet_enu.pdf https://www.synology.com/en-us/products/DS3622xs+#specs In order to operate this correctly, there is already a built-in ixgbe.ko. This module is called vanilla. There is a separate ixgbe.ko developed separately by Redpill. Overriding the vanilla module and using this module instead will cause problems. So, when creating an integrated pack for the two platforms, Broadwell and Broadwellnk, I overwrite the existing Redpill module with this vanilla module. https://github.com/PeterSuh-Q3/arpl-modules/tree/main/vanilla/broadwell-4.4.302 https://github.com/PeterSuh-Q3/arpl-modules/tree/main/vanilla/broadwellnk-4.4.302 I discussed this with @wjz304 quite a while ago. So, I emphasized that this is something that must be applied to ARPL-i18n. If you extract ixgbe.ko from my module integration pack, it is a vanilla module. https://github.com/PeterSuh-Q3/arpl-modules/releases/tag/v1.61 If ixgbe.ko extracted from ARPL's module integration pack is also a vanilla module, the size must be the same. https://github.com/wjz304/arpl-modules/releases/tag/23.9.5 The first person to guide how to handle it this way was @fbelavenuto, the owner of this topic and the founder of ARPL. p.s: I have now extracted and compared the size of Broadwell-4.4.302's ixgbe.ko, which is 415,667 bytes, which is the same for both. I think we need to look for the cause again. To check the log in ARPL, don't you need to add the dgbutils addon separately? A nice summary :). I'm not having any issues with my machine - I had been attempting to offer some direction to the person posting up above with "No disks Found" :). My sole project for now is to try and get my SATA controller and LSI HBA to work together with no port conflicts. Quote Link to comment Share on other sites More sharing options...
Uuugh Posted October 16, 2023 Share #2446 Posted October 16, 2023 On 8/18/2023 at 3:50 PM, Uuugh said: Solved. My posts feel like SPAM now. I'll wrap up the corrected script and instructions, upload to GitHub, and paste a link in a new post. Hopefully this will help anyone using DSM7 with a Lenovo LS120 DAS. Dear Moderator. Feel free to delete these three posts and I will repost a solution. Thanks I updated the script and installation instructions in the original repo. https://github.com/ParkWardRR/Synology-Lenovo-SA120-Fanspeed Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 20, 2023 Share #2447 Posted October 20, 2023 I use xpenology since 2012, so i have a good skill. Last few months tried many more loaders, but finally ARC loader wins, it deals a wide range of addons, modules, functions, setting is very easy and fast, author update it frequently. I changed at july my hardware to a topton n1 pro mini nas server, installed that loader, and then works good. Just checked cpu frequencies, tried cpu scaling, but unfortulately get significant lower points, so just untick cpu freq scaling option, and rebuild loader. Nothing happens, so burn loader again, untick cpu freq scaling, but unfortunately that method doesn't work, frequency scaling works at me. Completely erased hdd, burn image again, copied back saved data, and then works good. At september sell my server, and buy same one again, unfortunately i forgot untick (or ticked it) cpu frequency scaling option, and then it works again, but my geekbench points same low as earlier. Format boot flash drive, rebuild loader without cpu frequency scaling, boot, and that option working again and again. It's a ryzen5-5500u 6 core 12 thread CPU, differente between two state is only 2 watts. How can i completely delete it? Quote Link to comment Share on other sites More sharing options...
SIMOJFJ Posted October 25, 2023 Share #2448 Posted October 25, 2023 Hello, I have an Hp proloant microserver Gen 8. Install an Intel card apart from the 2 that are integrated. With Jun's loader I had problems with the drivers, And now with this I have the same problem. Is there a version that comes with these drivers. a million thanks Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 26, 2023 Share #2449 Posted October 26, 2023 (edited) On 10/20/2023 at 1:50 PM, Rick4 said: I use xpenology since 2012, so i have a good skill. Last few months tried many more loaders, but finally ARC loader wins, it deals a wide range of addons, modules, functions, setting is very easy and fast, author update it frequently. I changed at july my hardware to a topton n1 pro mini nas server, installed that loader, and then works good. Just checked cpu frequencies, tried cpu scaling, but unfortulately get significant lower points, so just untick cpu freq scaling option, and rebuild loader. Nothing happens, so burn loader again, untick cpu freq scaling, but unfortunately that method doesn't work, frequency scaling works at me. Completely erased hdd, burn image again, copied back saved data, and then works good. At september sell my server, and buy same one again, unfortunately i forgot untick (or ticked it) cpu frequency scaling option, and then it works again, but my geekbench points same low as earlier. Format boot flash drive, rebuild loader without cpu frequency scaling, boot, and that option working again and again. It's a ryzen5-5500u 6 core 12 thread CPU, differente between two state is only 2 watts. How can i completely delete it? So i got informations from ARC deveroper himself, simply boot to arc loader, and choose force reinstall dsm. All cpuscaling "features" gone, but other data remains, it works good. Edited October 26, 2023 by Rick4 Quote Link to comment Share on other sites More sharing options...
lord_kimbou Posted October 31, 2023 Share #2450 Posted October 31, 2023 Hi! A little stupid question... It's possible to add virtio disk driver, to see proxmox drives of this type with arpl or RR? That's all, Thanks!!! 😘 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.