buozinis Posted June 25, 2023 Share #2176 Posted June 25, 2023 On 6/5/2023 at 12:47 PM, bnicolae said: Looks good to me. It means that the system booted in DSM. But it wasn't. The synology finder could not find it. I just reinstalled as this automated pill makes life so easier. Quote Link to comment Share on other sites More sharing options...
bloodilo Posted June 30, 2023 Share #2177 Posted June 30, 2023 Hi guys! I did a lot of weired things with my xpenology a last couple of weeks so it kinda malfunction now in terms of weired things I did, lol. It’s still completely ok as a NAS, but it looks like I messed something up on web station, certs, docker and several other packages. Reinstall of this packages does not solve all the issues so I decided to reinstall DSM. Is it possible to do it w/o losing all my data? The best part: I am working with it remotely right now, so my usual way (detach drives with important data, install DSM from scratch to the remain one and rebuild other 3 drives later) is unfortunately not possible right now. I can remotly login to ARPL, but have no clue what to do next. I am pretty confused and beg for Your help. Quote Link to comment Share on other sites More sharing options...
Bambo11 Posted July 4, 2023 Share #2178 Posted July 4, 2023 (edited) Maybe i just didnt read it or i overlooked it, but i installed arpl on a usb, i migrated my dsm 6.x to 7.1.x, this all went good. But do i have to go on every boot to the loader menu on http://localip:7691 to boot dsm? When i reboot, dsm doesn't start by itself, because from usb the arpl configuration menu starts. How can i automate booting into dsm? Edited July 4, 2023 by Bambo11 Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted July 4, 2023 Share #2179 Posted July 4, 2023 29 минут назад, Bambo11 сказал: How can i automate booting into dsm? Build bootloader and reboot to DSM from ARPL menu. Next time it will start automatically Quote Link to comment Share on other sites More sharing options...
Bambo11 Posted July 4, 2023 Share #2180 Posted July 4, 2023 3 minutes ago, dj_nsk said: Build bootloader and reboot to DSM from ARPL menu. Next time it will start automatically i build bootloader, i booted into DSM, i migrated in dsm from 6.x. to 7.1.x, but after rebooting dsm it will not start automatic. it will boot into arpl configuration menu Quote Link to comment Share on other sites More sharing options...
Bambo11 Posted July 4, 2023 Share #2181 Posted July 4, 2023 12 minutes ago, dj_nsk said: Build bootloader and reboot to DSM from ARPL menu. Next time it will start automatically I found a switch in the advanced menu to toggle the behavior on boot. Either boot into configuration or boot directly into dsm. Everything works good. Thank yopu very much! Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 5, 2023 Share #2182 Posted July 5, 2023 (edited) Hi all! I just bought a brand new Topton N1 pro nas server from geekbuying, it's a brilliand hardware sped and size, features. It has AMD Ryzen 5 5500U 6C/12T CPU, 16G DDR4 RAM, double nvme and double sata connetors, double i226V lan ports, HDMI, DP, more USBs, SD card slot, etc etc. Just tried install ARPL,, tried RPL i18n version, uefi and legacy boot, but no luck, after i try boot the loader, nothing happens, but on the monitor looks like everything's good. I am a good skilled it technician, who uses xpenology 10 years ago on many many more hardwares, so i completely known best method, and right steps. But i think, now the two i226V lan cards made any trouble, (tried all two, first boot working, under configuring loader working, but after boot can't visible in my LAN, tried DR920+, DS923+, DS3222xs+, etc etc images, same result, booting, get ip, set all, reboot, and wait wait wait, nothings happened. Web browser and syno assistant doesn't find new server. What can i do in this case? How can check, i226V driver is on the sd card, and working after i build the loader? Edited July 5, 2023 by Rick4 Quote Link to comment Share on other sites More sharing options...
wjz304 Posted July 5, 2023 Share #2183 Posted July 5, 2023 55 minutes ago, Rick4 said: Hi all! I just bought a brand new Topton N1 pro nas server from geekbuying, it's a brilliand hardware sped and size, features. It has AMD Ryzen 5 5500U 6C/12T CPU, 16G DDR4 RAM, double nvme and double sata connetors, double i226V lan ports, HDMI, DP, more USBs, SD card slot, etc etc. Just tried install ARPL,, tried RPL i18n version, uefi and legacy boot, but no luck, after i try boot the loader, nothing happens, but on the monitor looks like everything's good. I am a good skilled it technician, who uses xpenology 10 years ago on many many more hardwares, so i completely known best method, and right steps. But i think, now the two i226V lan cards made any trouble, (tried all two, after boot can't visible in my LAN, tried DR920+, DS923+, DS3222xs+, etc etc images, same result, booting, get ip, set all, reboot, and wait wait wait, nothings happened. Web browser and syno assistant doesn't find new server. What can i do in this case? How can check, i226V driver is on the sd card, and working after i build the loader? Add the "console" in the "addons" and you will receive a screen terminal, Then you can obtain information through it to determine the loading status or error message of the network card If the screen does not enter the terminal, it is likely that the kernel has crashed. Please try switching to the LKM or switching to direct boot Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 5, 2023 Share #2184 Posted July 5, 2023 18 minutes ago, wjz304 said: Add the "console" in the "addons" and you will receive a screen terminal, Then you can obtain information through it to determine the loading status or error message of the network card If the screen does not enter the terminal, it is likely that the kernel has crashed. Please try switching to the LKM or switching to direct boot OKay, thanks, will try it! Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 5, 2023 Share #2185 Posted July 5, 2023 (edited) 37 minutes ago, Rick4 said: OKay, thanks, will try it! That'all, booting in order, but don't find. Another one xpenology server working without issues within 3 meters, so I know, finding, lan,cables, routers works good. Edited July 5, 2023 by Rick4 Quote Link to comment Share on other sites More sharing options...
mojojojotroi Posted July 5, 2023 Share #2186 Posted July 5, 2023 Il y a 2 heures, Rick4 a dit : Hi all! I just bought a brand new Topton N1 pro nas server from geekbuying, it's a brilliand hardware sped and size, features. It has AMD Ryzen 5 5500U 6C/12T CPU, 16G DDR4 RAM, double nvme and double sata connetors, double i226V lan ports, HDMI, DP, more USBs, SD card slot, etc etc. Just tried install ARPL,, tried RPL i18n version, uefi and legacy boot, but no luck, after i try boot the loader, nothing happens, but on the monitor looks like everything's good. I am a good skilled it technician, who uses xpenology 10 years ago on many many more hardwares, so i completely known best method, and right steps. But i think, now the two i226V lan cards made any trouble, (tried all two, first boot working, under configuring loader working, but after boot can't visible in my LAN, tried DR920+, DS923+, DS3222xs+, etc etc images, same result, booting, get ip, set all, reboot, and wait wait wait, nothings happened. Web browser and syno assistant doesn't find new server. What can i do in this case? How can check, i226V driver is on the sd card, and working after i build the loader? Your problem looks like mine on the MSI MPG B460I. I always have network when configuring the loader, but not when booting DSM (success ratio should approches 1 time on 50 tries). I was thinking the R8125 was problematic, so I bought a Intel i350-T2 to plug on PCI-E port, same problem... I'm a seasoned technician too, I've tried lots of different things, I've been using DSM since 2010, XPenology since 2014. I was so disgusted to waste so much time that I resigned myself to testing TrueNAS Scale LOL ! 1 Quote Link to comment Share on other sites More sharing options...
mojojojotroi Posted July 5, 2023 Share #2187 Posted July 5, 2023 Le 04/07/2023 à 12:48, Bambo11 a dit : i build bootloader, i booted into DSM, i migrated in dsm from 6.x. to 7.1.x, but after rebooting dsm it will not start automatic. it will boot into arpl configuration menu I experienced this issue sometimes also. Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 5, 2023 Share #2188 Posted July 5, 2023 13 minutes ago, mojojojotroi said: Your problem looks like mine on the MSI MPG B460I. I always have network when configuring the loader, but not when booting DSM (success ratio should approches 1 time on 50 tries). I was thinking the R8125 was problematic, so I bought a Intel i350-T2 to plug on PCI-E port, same problem... I'm a seasoned technician too, I've tried lots of different things, I've been using DSM since 2010, XPenology since 2014. I was so disgusted to waste so much time that I resigned myself to testing TrueNAS Scale LOL ! Thank you for your reply. I hope, i can use dsm too, i have time to get more skill, and my other server will working until i can boot with this new one. Quote Link to comment Share on other sites More sharing options...
gericb Posted July 5, 2023 Share #2189 Posted July 5, 2023 3 hours ago, mojojojotroi said: Your problem looks like mine on the MSI MPG B460I. I always have network when configuring the loader, but not when booting DSM (success ratio should approches 1 time on 50 tries). I was thinking the R8125 was problematic, so I bought a Intel i350-T2 to plug on PCI-E port, same problem... I'm a seasoned technician too, I've tried lots of different things, I've been using DSM since 2010, XPenology since 2014. I was so disgusted to waste so much time that I resigned myself to testing TrueNAS Scale LOL ! What about ditching the idea of the onboard NIC(s) and getting a secondary PCIe card, known to be fully supported? I got a dual port Intel T350-T2V2 for like $45. There are 4 port versions as well! Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 6, 2023 Share #2190 Posted July 6, 2023 19 hours ago, wjz304 said: Add the "console" in the "addons" and you will receive a screen terminal, Then you can obtain information through it to determine the loading status or error message of the network card If the screen does not enter the terminal, it is likely that the kernel has crashed. Please try switching to the LKM or switching to direct boot I don't get screen terminal, idon't see more, than before. What can i do for that? Quote Link to comment Share on other sites More sharing options...
wjz304 Posted July 6, 2023 Share #2191 Posted July 6, 2023 7 minutes ago, Rick4 said: I don't get screen terminal, idon't see more, than before. What can i do for that? I want to see what is currently displayed on the screen Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 6, 2023 Share #2192 Posted July 6, 2023 27 minutes ago, wjz304 said: I want to see what is currently displayed on the screen Posted on #2185 Now just try again. Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 6, 2023 Share #2193 Posted July 6, 2023 23 minutes ago, Rick4 said: Posted on #2185 Now just try again. So tried again. Format SD card, burn your image (arpl-i18n) with rufus. Push sd card and boot, at my pc wtite ip, enter, and trs to set all necessary things Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 6, 2023 Share #2194 Posted July 6, 2023 Just now, Rick4 said: So tried again. Format SD card, burn your image (arpl-i18n) with rufus. Push sd card and boot, at my pc wtite ip, enter, and trs to set all necessary things Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 6, 2023 Share #2195 Posted July 6, 2023 Just now, Rick4 said: Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 6, 2023 Share #2196 Posted July 6, 2023 Just now, Rick4 said: Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 6, 2023 Share #2197 Posted July 6, 2023 Just now, Rick4 said: Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 6, 2023 Share #2198 Posted July 6, 2023 Just now, Rick4 said: And i get that lines only. What do i wrong? Quote Link to comment Share on other sites More sharing options...
wjz304 Posted July 6, 2023 Share #2199 Posted July 6, 2023 2 minutes ago, Rick4 said: And i get that lines only. What do i wrong? Switch to direct boot in the advanced menu Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 6, 2023 Share #2200 Posted July 6, 2023 (edited) 25 minutes ago, wjz304 said: Switch to direct boot in the advanced menu Here is the direct boot Edited July 6, 2023 by Rick4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.