apriliars3 Posted November 29, 2022 Share #1301 Posted November 29, 2022 Hello! I'm in alpha version using the image for vmware. What is the best way to update to the beta version?Create new image on vmdk beta with your data user-config.yml (serial, mac, etc.)Only need download lastest vdmk, create your model with menu.sh and put your serial, mac, etc, and boot the new loader. Can you take snapshot or clone your virtual machine if you don’t think be reliable method. 1 Quote Link to comment Share on other sites More sharing options...
vinhnguyen Posted November 29, 2022 Share #1302 Posted November 29, 2022 (edited) v1.0 Beta 4 I can't boot into DMS anymore... I went back to v1.0 beta3 and booted normally. I use DVA3221. My NIC: I219, I225. (Mainboard Gigabyte W480M VISION W) Edited November 29, 2022 by vinhnguyen Quote Link to comment Share on other sites More sharing options...
blindspot Posted November 29, 2022 Share #1303 Posted November 29, 2022 20 hours ago, gazzac72 said: Hi all just got myself Rivo PCIe SATA Card, 8 Port with 8 SATA Cable, SATA Controller Expansion Card with Low Profile Bracket, Marvell 9215 Non-Raid, Boot as System Disk, Support 8 SATA 3.0 Devices(SA3014). tried to add to mainboard but system wont boot when connected is there drivers for this card or have i brought the wrong card many thanks Usually, avoid sata cards with more than one chipset (yours seems to have 88SE9215+JMB583), most likely DSM will see only some of them 2 or maybe 4 because of sata multiplexer. I've tested a 6 port x1 pcie 2.0 card with ASMedia ASM1166 chipset and it works fine. 1 Quote Link to comment Share on other sites More sharing options...
gazzac72 Posted November 29, 2022 Share #1304 Posted November 29, 2022 1 hour ago, blindspot said: Usually, avoid sata cards with more than one chipset (yours seems to have 88SE9215+JMB583), most likely DSM will see only some of them 2 or maybe 4 because of sata multiplexer. I've tested a 6 port x1 pcie 2.0 card with ASMedia ASM1166 chipset and it works fine. ahhh ok many thanks i will see if i can order one of those instead thankyou for answering Quote Link to comment Share on other sites More sharing options...
naamanf Posted November 29, 2022 Share #1305 Posted November 29, 2022 n00b question...trying to setup on a Unraid VM with virtio-net. How do I get the virtio-net installed? Quote Link to comment Share on other sites More sharing options...
edy00116 Posted November 30, 2022 Share #1306 Posted November 30, 2022 10 hours ago, apriliars3 said: Create new image on vmdk beta with your data user-config.yml (serial, mac, etc.) Only need download lastest vdmk, create your model with menu.sh and put your serial, mac, etc, and boot the new loader. Can you take snapshot or clone your virtual machine if you don’t think be reliable method. Thanks, i will try! Quote Link to comment Share on other sites More sharing options...
caocat Posted November 30, 2022 Share #1307 Posted November 30, 2022 Thank for share. Have a nice day. Quote Link to comment Share on other sites More sharing options...
dimammx Posted November 30, 2022 Share #1308 Posted November 30, 2022 First just wanted to say thanks for all the good work on ARPL. And wanted to ask is there a way to tell which drivers are actually used to boot the system. I was not sure what modules to select so i selected all included extra modules. Now have no idea which one is actually used for SATA controller 😅 Quote Link to comment Share on other sites More sharing options...
Orphée Posted November 30, 2022 Share #1309 Posted November 30, 2022 4 hours ago, dimammx said: First just wanted to say thanks for all the good work on ARPL. And wanted to ask is there a way to tell which drivers are actually used to boot the system. I was not sure what modules to select so i selected all included extra modules. Now have no idea which one is actually used for SATA controller 😅 While booted on DSM, probably 2 options : 1- lsmod 2- lspci -kkvq (every PCI device will show the current module name used) 1 Quote Link to comment Share on other sites More sharing options...
aportnov Posted November 30, 2022 Share #1310 Posted November 30, 2022 Are updates disabled yet? I can't upgrade from beta 3 to beta 6. Or is it just a new installation? Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted November 30, 2022 Author Share #1311 Posted November 30, 2022 Guys, beta4 and 5 have a bug, please update the ARPL, modules and addons. 2 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted November 30, 2022 Author Share #1312 Posted November 30, 2022 6 minutes ago, aportnov said: Are updates disabled yet? I can't upgrade from beta 3 to beta 6. Or is it just a new installation? Please try again Quote Link to comment Share on other sites More sharing options...
aportnov Posted November 30, 2022 Share #1313 Posted November 30, 2022 (edited) 30 минут назад, fbelavenuto сказал: Please try again I tried, but I get the same error. Edited November 30, 2022 by aportnov Quote Link to comment Share on other sites More sharing options...
beefyjoe Posted December 1, 2022 Share #1314 Posted December 1, 2022 Hello, I recently updated from ARPL alpha 4 to arpl 1 beta 6, and now its saying that the kernal could not load and i cant boot into DSM, The ARPL configuration, or anything, i just keep getting stuck because there is no kernal to boot off anymore.... what should I do to fix this? I dont really know what I can do here to fix since I can't do or access anything on the machine now... do I need to reflash the flash drive with latest ARPL? Please help, thanks Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted December 1, 2022 Author Share #1315 Posted December 1, 2022 17 minutes ago, beefyjoe said: Hello, I recently updated from ARPL alpha 4 to arpl 1 beta 6, and now its saying that the kernal could not load and i cant boot into DSM, The ARPL configuration, or anything, i just keep getting stuck because there is no kernal to boot off anymore.... what should I do to fix this? I dont really know what I can do here to fix since I can't do or access anything on the machine now... do I need to reflash the flash drive with latest ARPL? Please help, thanks Can you access the user-config.yml from first partition, in another machine? Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted December 1, 2022 Author Share #1316 Posted December 1, 2022 15 hours ago, aportnov said: I tried, but I get the same error. I'm sorry, I don't know what could have happened! I just tested it and it's working! Quote Link to comment Share on other sites More sharing options...
beefyjoe Posted December 1, 2022 Share #1317 Posted December 1, 2022 6 minutes ago, fbelavenuto said: Can you access the user-config.yml from first partition, in another machine? Hi fbelavenuto, thanks for taking the time to reply. So I did have to reflash the flash drive with the latest ARPL. Before I did that, i copied my user-config.yml to my personal computer. While I was setting up ARPL fresh, I editing the user-config/yml manually in ARPL configuration, and after rebooting, it seems that my DSM is detectable, its showing "Recoverable" as the state in Synology assistant. I am currently going through the Recovery with DSM via the web interface for Synology Asistant/Finds Synology. I hope this works, fingers crossed. (It gave me a warning about my DSM being older than the one on the disks, and said this common after RMA). I am glad i chose the same build that I started with. Also, is DSM 7.1 working on ARPL for DS918+ appololake? Just curious, as I would like to update for security. Quote Link to comment Share on other sites More sharing options...
beefyjoe Posted December 1, 2022 Share #1318 Posted December 1, 2022 Ok so I am recovered... but now my 2FA doesnt work at all... for any of my accounts. I am unable to sign in to the web portal to manage the system, but I can still SSH in, I am currently researching how to go about getting around 2FA and get back into the web interface... If anyone has experience with this and is kind enough to donate their knowledge, I would be happy to take your advice. Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted December 1, 2022 Share #1319 Posted December 1, 2022 I have in the newest version (beta6) the following issue: Quote Link to comment Share on other sites More sharing options...
beefyjoe Posted December 1, 2022 Share #1320 Posted December 1, 2022 23 minutes ago, beefyjoe said: Ok so I am recovered... but now my 2FA doesnt work at all... for any of my accounts. I am unable to sign in to the web portal to manage the system, but I can still SSH in, I am currently researching how to go about getting around 2FA and get back into the web interface... If anyone has experience with this and is kind enough to donate their knowledge, I would be happy to take your advice. I was able to get around 2fa by creating a new account with synouser and adding them to administrator's group, per this guide, https://global.download.synology.com/download/Document/Software/DeveloperGuide/Firmware/DSM/All/enu/Synology_DiskStation_Administration_CLI_Guide.pdf For others to reference if they get locked out Quote Link to comment Share on other sites More sharing options...
vinhnguyen Posted December 1, 2022 Share #1321 Posted December 1, 2022 I went to beta 6 but it's like beta 4, beta 5 is not stable when booting into DSM. I went back to beta 3... Quote Link to comment Share on other sites More sharing options...
aportnov Posted December 1, 2022 Share #1322 Posted December 1, 2022 (edited) 2 часа назад, fbelavenuto сказал: I'm sorry, I don't know what could have happened! I just tested it and it's working! The problem was bond. I disabled one of the interfaces and updated without any problems. Tell me what is the switch direct boot parameter and what is the difference between LM prod and dev? Edited December 1, 2022 by aportnov Quote Link to comment Share on other sites More sharing options...
gazzac72 Posted December 1, 2022 Share #1323 Posted December 1, 2022 wondering if anyone has any issues with ram usage im using beta 3 running 12gb ddr4 ram and it always seems to run high,im running rs4021xs+ with plex,jellyfin,radarr,sonarr and sab. ive tried it on ds622 or something like that and had the same results high usage of ram anyone else run into this issue? Quote Link to comment Share on other sites More sharing options...
aportnov Posted December 1, 2022 Share #1324 Posted December 1, 2022 (edited) 5 часов назад, vinhnguyen сказал: I went to beta 6 but it's like beta 4, beta 5 is not stable when booting into DSM. I went back to beta 3... I noticed that DSM don't load on the beta 6 version if the reducelog and powersched addons are enabled Edited December 1, 2022 by aportnov Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted December 1, 2022 Author Share #1325 Posted December 1, 2022 7 hours ago, beefyjoe said: Also, is DSM 7.1 working on ARPL for DS918+ appololake? Just curious, as I would like to update for security. yes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.