pdbeta Posted March 2, 2017 Share #2076 Posted March 2, 2017 @jun thank you, i am try your loader ON my server2012&vmware workstartion.it is very perfect. because hyperv is the most popular virtual software on windows platform ,so i very expect that you can develop a loader for dsm6.1 on hyper v. thanks. Quote Link to comment Share on other sites More sharing options...
CtrlAltDel Posted March 2, 2017 Share #2077 Posted March 2, 2017 I'm running 6.1 with SAB, sickrage, couchpotato, transmission and Plex [WINKING FACE] But did you install the packages in 6.1 or were they installed in 6.02 and worked after migrating to 6.1? I ask because some packages work OK if they are part of a migration but fail when you try to install them on newer builds. I haven't tried 6.1 I'm just curious to know what to expect under both conditions? I suspect some packages work when migrated but fail to install on the latest build based on past experience. Quote Link to comment Share on other sites More sharing options...
boOmLa Posted March 2, 2017 Share #2078 Posted March 2, 2017 Someone tried updating to 6.1 update 1 from the control panel - holding back couse I dont have a test nas now - getting the update 1 on the main everyday nas Quote Link to comment Share on other sites More sharing options...
Rusty Posted March 2, 2017 Share #2079 Posted March 2, 2017 Yes go ahead and update, just did it to mine. Quote Link to comment Share on other sites More sharing options...
ema Posted March 2, 2017 Share #2080 Posted March 2, 2017 Yes go ahead and update, just did it to mine. +1 ciao ema Quote Link to comment Share on other sites More sharing options...
boOmLa Posted March 2, 2017 Share #2081 Posted March 2, 2017 Yes go ahead and update, just did it to mine. +1 ciao ema Thanx both of you - i'll do PS : Update 1 went like a charme Quote Link to comment Share on other sites More sharing options...
Kitaro Posted March 2, 2017 Share #2082 Posted March 2, 2017 Hello! I correctly understand that on 3617 QuickConnect won't work will be the new generator of serial number and MAC? He doesn't want to work for me, as if I didn't put and didn't migrate on 6.1 from 3617. Or there are those for whom QuickConnect works? Installation 3617 is urgent more for those at whom Xeon's (with unoperated QuickConnect) so far? Quote Link to comment Share on other sites More sharing options...
hellbondz Posted March 2, 2017 Share #2083 Posted March 2, 2017 I tried with force install and it worked, but now, every time my machine boots, this error comes up... Any ideas? Hi. I have the same problem. My update went great. I've updated from DS3615xs 6.0.2 u9 to DS3617xs 6.1 version without any problem. Settings migration went beautifully. The only problem is this error after reboot. Adding "syno_port_thaw=1" argument to normal boot does not help. Besides that everything looks like it's working. Ok. And the problem appeard. I had it for the second time. Hard to explain but it looks like synology web management is disconnecting from the hardware. I can login to web interface, shares and shared data work, but almost nothing works after i login. Interface is not hanging i can open icons from main window but everything that i do open is loading indefinitely. When i open resource monitor i get the communicate that "connection was not successful. Check your network settings". After reboot everything is back to normal. Quote Link to comment Share on other sites More sharing options...
DrSniper Posted March 2, 2017 Share #2084 Posted March 2, 2017 Yes go ahead and update, just did it to mine. +1 ciao ema Thanx both of you - i'll do PS : Update 1 went like a charme How you updated from 6.02 to 6.1? pls wright a tutorial I use xpenology without VMWare Quote Link to comment Share on other sites More sharing options...
ronin Posted March 2, 2017 Share #2085 Posted March 2, 2017 On the new alpha loader , the AMD menu item is commented out. Does this mean Jun, that this alpha is not yet for AMD? Or can I adjust myself by changing the AMD rom? Thank you. Quote Link to comment Share on other sites More sharing options...
boOmLa Posted March 2, 2017 Share #2086 Posted March 2, 2017 How you updated from 6.02 to 6.1? pls wright a tutorial I use xpenology without VMWare Go to this post --> viewtopic.php?f=2&t=20216&start=2010#p92130 Thanx to FiberInternetUser who made it clear for me Quote Link to comment Share on other sites More sharing options...
Sonnyboy666 Posted March 2, 2017 Share #2087 Posted March 2, 2017 Many Thx to jun! Got it working! Baremetal install on a HP Proliant Gen8. Updated from 6.02 to 6.1. Also updated manually to Update 1. Everythings working great! One question: I installed the 3615xs Version of the loader. What are the differences to the 3617xs loader? Thanx. Quote Link to comment Share on other sites More sharing options...
cuspess Posted March 2, 2017 Share #2088 Posted March 2, 2017 Many Thx to jun! Got it working! Baremetal install on a HP Proliant Gen8. Updated from 6.02 to 6.1. Also updated manually to Update 1. Everythings working great! One question: I installed the 3615xs Version of the loader. What are the differences to the 3617xs loader? Thanx. Sonnyboy, did you migrate yours from DSM 6? What I mean is you replaced loader 1.01 with 1.02, then boot up with old hdd installed, go through the migration process? any error afterwards? I am on Gen8 with esxi, about to migrate as soon as someone succeed without the error. thanks Quote Link to comment Share on other sites More sharing options...
Sonnyboy666 Posted March 2, 2017 Share #2089 Posted March 2, 2017 Many Thx to jun! Got it working! Baremetal install on a HP Proliant Gen8. Updated from 6.02 to 6.1. Also updated manually to Update 1. Everythings working great! One question: I installed the 3615xs Version of the loader. What are the differences to the 3617xs loader? Thanx. Sonnyboy, did you migrate yours from DSM 6? What I mean is you replaced loader 1.01 with 1.02, then boot up with old hdd installed, go through the migration process? any error afterwards? I am on Gen8 with esxi, about to migrate as soon as someone succeed without the error. thanks Yes, I migrated from 6.02 with my HDDs in place. Just replaced the loader. No problems at all. Quote Link to comment Share on other sites More sharing options...
tigs Posted March 2, 2017 Share #2090 Posted March 2, 2017 One question: I installed the 3615xs Version of the loader. What are the differences to the 3617xs loader? Thanx. I dont know all the differences. What I do know is their CPU artitech is different. 3617xs uses broadwell, while 3615xs uses Braswell. Some packages are CPU specific, for example TVheadend. you have to choose the right package to install. I dont think there is a package available for broadwell. Quote Link to comment Share on other sites More sharing options...
Sonnyboy666 Posted March 2, 2017 Share #2091 Posted March 2, 2017 One question: I installed the 3615xs Version of the loader. What are the differences to the 3617xs loader? Thanx. I dont know all the differences. What I do know is their CPU artitech is different. 3617xs uses broadwell, while 3615xs uses Braswell. Some packages are CPU specific, for example TVheadend. you have to choose the right package to install. I dont think there is a package available for broadwell. Thank you. Then was the 3615xs loader the right choice for me. Quote Link to comment Share on other sites More sharing options...
Salah Posted March 2, 2017 Share #2092 Posted March 2, 2017 Is the mega link pulled? Quote Link to comment Share on other sites More sharing options...
hnamanh Posted March 2, 2017 Share #2093 Posted March 2, 2017 Is the mega link pulled? No, the link is still good. Quote Link to comment Share on other sites More sharing options...
abced Posted March 2, 2017 Share #2094 Posted March 2, 2017 Hello! I correctly understand that on 3617 QuickConnect won't work will be the new generator of serial number and MAC?He doesn't want to work for me, as if I didn't put and didn't migrate on 6.1 from 3617. Or there are those for whom QuickConnect works? Installation 3617 is urgent more for those at whom Xeon's (with unoperated QuickConnect) so far? QC won't work anymore, if you don't have real serial and MAC pair since it seems they (finally) started to check which serials actually exist. Quote Link to comment Share on other sites More sharing options...
belierzz Posted March 2, 2017 Share #2095 Posted March 2, 2017 QC didn't work on 6.1 after upgrade from 6.02 either. I used a real serial and mac-adress from an old Synology NAS. Now I have generated serial and 2x mac-adress for DS3615xs and it works again. They don't check if serials really exist. They may check if the serial / mac-adress match the corr. Synology NAS type. Cheers Quote Link to comment Share on other sites More sharing options...
chrisund123 Posted March 2, 2017 Share #2096 Posted March 2, 2017 I'm running 6.1 with SAB, sickrage, couchpotato, transmission and Plex [WINKING FACE] But did you install the packages in 6.1 or were they installed in 6.02 and worked after migrating to 6.1? I ask because some packages work OK if they are part of a migration but fail when you try to install them on newer builds. I haven't tried 6.1 I'm just curious to know what to expect under both conditions? I suspect some packages work when migrated but fail to install on the latest build based on past experience. Yes they were all previously installed on my 6.0.2 install (and my 5.2 install for that matter!) It gave a warning that Plex was incompatible, but it was up and running just fine after the update. Quote Link to comment Share on other sites More sharing options...
Sevennl Posted March 2, 2017 Share #2097 Posted March 2, 2017 For Proxmox 4.4-1. I have DS3615xs 6.1 Jun's Mod V1.02-alpha as far as booting up ( using the VM boot line ), Synology Assistant finds the nas but when i try to install DSM (local file or internet) it returns with the error message : Failed to format disk (35) VM setup as for now is : 2048MB base memory 1 CPU / 2 cores (kvm64) Disk1 = IDE 0 32GB Disk2 = SATA 900GB Network = E1000 I tested IDE/VirtIO/SCSI for the disk2 interface, but non would work (no hdd found) Quote Link to comment Share on other sites More sharing options...
CtrlAltDel Posted March 2, 2017 Share #2098 Posted March 2, 2017 I'm running 6.1 with SAB, sickrage, couchpotato, transmission and Plex [WINKING FACE] But did you install the packages in 6.1 or were they installed in 6.02 and worked after migrating to 6.1? I ask because some packages work OK if they are part of a migration but fail when you try to install them on newer builds. I haven't tried 6.1 I'm just curious to know what to expect under both conditions? I suspect some packages work when migrated but fail to install on the latest build based on past experience. Yes they were all previously installed on my 6.0.2 install (and my 5.2 install for that matter!) It gave a warning that Plex was incompatible, but it was up and running just fine after the update. Thanks for clarifying that. Some of those packages may not install on a clean build of 6.x. Quote Link to comment Share on other sites More sharing options...
Kitaro Posted March 3, 2017 Share #2099 Posted March 3, 2017 QC won't work anymore, if you don't have real serial and MAC pair since it seems they (finally) started to check which serials actually exist. You probably didn't understand my question. On 3615 QC works (even on 6.1)! And here on 3617 - No. On 3615 worked even with serial numbers and MAC from other versions. On 3617 - even the serial number + MAC doesn't work with earlier working or other couples in any way. Until there is a SN/MAC generator for 3617 that QC won't work at it? Or at someone earned? If yes, that as? I asked about it. Quote Link to comment Share on other sites More sharing options...
koroziv Posted March 3, 2017 Share #2100 Posted March 3, 2017 Many Thx to jun! Got it working! Baremetal install on a HP Proliant Gen8. Updated from 6.02 to 6.1. Also updated manually to Update 1. Everythings working great! One question: I installed the 3615xs Version of the loader. What are the differences to the 3617xs loader? Thanx. Sonnyboy, did you migrate yours from DSM 6? What I mean is you replaced loader 1.01 with 1.02, then boot up with old hdd installed, go through the migration process? any error afterwards? I am on Gen8 with esxi, about to migrate as soon as someone succeed without the error. thanks Also on esxi with xpeno 6.0 atm; tried to migrate using a 6.0 test vm, the vm boots after the boot vmdk replacement , I start the install, chose migrate and after that nothing, the vm does not appear on the network anymore, I can't connect to it. I waited about 10 minutes, forced shut down the vm, powered on again but nothing. Maybe I need to wait more for the migration to complete, don't really have much time for tests these days A fresh install with 6.1 works with no issues on esxi. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.