Peter Suh Posted October 10, 2023 Share #4976 Posted October 10, 2023 11 hours ago, Peter Suh said: [NOTICE] How to permanently install tcz extension package on Tinycore Linux 12.0 (Firmware for the module and various utilities can be installed. Caution, only possible if there are no dependencies for each package) tce-load -iw [tcz extension package name] Extension packages installed in this way are volatile and are not permanently installed. Check the list of downloadable tcz extension packages at the link below. (Detailed information about each expansion package can be found in Apps -> Cloud (remove) -> Browse in the TaskBar at the bottom of the TC, and select remote extension -> Info tab.) http://tinycorelinux.net/12.x/x86_64/tcz/ Specify the desired tcz extension package name tczpack="firmware-broadcom_bnx2x.tcz" tcrpdev=$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3) cd /mnt/${tcrpdev}3/cde/optional sudo curl -kLO# http://tinycorelinux.net/12.x/x86_64/tcz/${tczpack} sudo md5sum ${tczpack} > ${tczpack}.md5.txt echo "${tczpack}" >> /mnt/${tcrpdev}3/cde/onboot.lst cd ~ echo "y" |./rploader.sh backup Use the command below to re-check whether the desired processing has been performed correctly. If this is not done correctly, TCRP may not boot as usual. tczpack="firmware-broadcom_bnx2x.tcz" tcrpdev=$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3) cat /mnt/${tcrpdev}3/cde/onboot.lst | grep "${tczpack}" ll /mnt/${tcrpdev}3/cde/optional/${tczpack}* If there is a more convenient way to use it, I will share it later. This is a permanent installation method that takes dependencies into account. Here's some guidance I received from the Tinycore forum admin today. This is an example of installing gparted and required extensions together. After installation is complete, you can use it with “sudo gparted”. ----------------------------------------------------- tce-load -iw gparted dosfstools mtools tcrpdev=$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3) ce sudo cp -f ./optional/* /mnt/${tcrpdev}3/cde/optional cat onboot.lst >> /mnt/${tcrpdev}3/cde/onboot.lst cd ~ echo "y" |./rploader.sh backup [CHECK] tcrpdev=$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3) cat /mnt/${tcrpdev}3/cde/onboot.lst | grep -e gparted -e dosfstools -e mtools ll /mnt/${tcrpdev}3/cde/optional/gparted* ll /mnt/${tcrpdev}3/cde/optional/dosfstools* ll /mnt/${tcrpdev}3/cde/optional/mtools* Quote Link to comment Share on other sites More sharing options...
ikkeenjij36 Posted October 21, 2023 Share #4977 Posted October 21, 2023 On 4/15/2022 at 6:03 PM, AlexFullmoon said: Hello. I.ve got a problem after upgrading RAM — half or it is shown as "reserved" in GUI and nonexistent in report by free (i.e. 2×4 Gb, free shows only 4 total). Searching got me this older advice to set "disable_mtrr_trim" in grub.cfg, but it's unclear how this applies to redpill, and in any case, where I can add it in Tinycore config. What should I do? same problem for me added as suggestted in special commands but after reboot still lots of ram in cache Please help? Hi there im ruuning rs4022 7.2.1 latest ud and almpst everything is running fine but when i look at resource monitor i see that of my 32gb of ram memory 23.8 gb resevered in cache,is there a way to make it usable for the system instead of cahce? I know tha with juns loader you could aadjust the grub.cfg with diasble.trim.. or something but i dont know how to do that with the tcrp loader. Is there anyone whod be willing to hellp me with this? Broncontrole Overzicht CPU Geheugen Netwerk Schijf Volume LUN NFS Geheugensamenstelling Gereserveerd 773.2 MB Gebruikt 2.2 GB Buffer 49.8 MB In cache 28.7 GB Vrij 290 MB Quote Link to comment Share on other sites More sharing options...
Captainfingerbang Posted October 24, 2023 Share #4978 Posted October 24, 2023 Can someone tell me if I can run tcrp or arpl or friend using an LSI SAS to SATA card using ds918+, baremetal? Quote Link to comment Share on other sites More sharing options...
pocopico Posted October 25, 2023 Author Share #4979 Posted October 25, 2023 7 hours ago, Captainfingerbang said: Can someone tell me if I can run tcrp or arpl or friend using an LSI SAS to SATA card using ds918+, baremetal? Yes you can, i have two of them. Quote Link to comment Share on other sites More sharing options...
titoum Posted October 25, 2023 Share #4980 Posted October 25, 2023 5 hours ago, pocopico said: Yes you can, i have two of them. hi pocopico, is there an info on the wiki with latest supported update/tcrp version? would nice to have to know if we can safely update. cheers Quote Link to comment Share on other sites More sharing options...
pocopico Posted October 25, 2023 Author Share #4981 Posted October 25, 2023 4 minutes ago, titoum said: hi pocopico, is there an info on the wiki with latest supported update/tcrp version? would nice to have to know if we can safely update. cheers The updates are handles by tcrpfriend so in tcrpfriend repo, i will try to update the info. Quote Link to comment Share on other sites More sharing options...
titoum Posted October 25, 2023 Share #4982 Posted October 25, 2023 5 hours ago, pocopico said: The updates are handles by tcrpfriend so in tcrpfriend repo, i will try to update the info. super 🙏 i wasn't sure if i could update to latest version and Peter was saying yours wasn't supporting it yet... so having that info in wiki would be quite helpful ☺️ cheers 🍻 Quote Link to comment Share on other sites More sharing options...
Captainfingerbang Posted November 2, 2023 Share #4983 Posted November 2, 2023 (edited) idk if right thread, and i am sorry if this has been spoken, but: my Xeon should be running between 2.4-3.3GHz. But only shows 1.2. Does anyone know why??? BTW i used peters TCRP FRIEND (what was on my usb already) .9 something, and easily, successful upgraded to latest DSM 7.2.1 69057 BAREMETAL DS918+ So THANK YOU. last question: Is it possible to use this HBA card with TRCP FRIEND? LINK TO EBAY HBA CARD p.s. Honestly, i am so confused about all the loaders out now, ARCP TCRP, TCRP FRIEND, TCRP FRIEND w/MSHELL? I THOUGHT i had mshell?! So im not certain what to do because i want to reflash my usb boot drive with mshell, but its saying there is errors. Honestly i am without words about what to do with that. Like is the next loader going to be named PCRTPRTPRDNIRFPRTCPFRTPCRIDNIRFTRCPFRTPCP? Haha i used AI tp scramble all the letters of your loaders. Edited November 2, 2023 by Captainfingerbang Quote Link to comment Share on other sites More sharing options...
boghea Posted November 9, 2023 Share #4984 Posted November 9, 2023 Hi all, I tried installing on a Dell T630 server (bare metal). While building the loader (once model, version, etc. is selected) at some point it fails with attached error. Any advice? Thank you. Quote Link to comment Share on other sites More sharing options...
AlexFullmoon Posted November 13, 2023 Share #4985 Posted November 13, 2023 On 10/21/2023 at 2:06 PM, ikkeenjij36 said: same problem for me added as suggestted in special commands but after reboot still lots of ram in cache Please help? It goes into cmdline, as variable with name disable_mtrr_trim and empty content, or, depending on your loader, as "disable_mtrr_trim: "" Also, if you have two RAM modules, try swapping them around. Magic, I know, but apparently it may help. Quote Link to comment Share on other sites More sharing options...
Antonio92 Posted November 17, 2023 Share #4986 Posted November 17, 2023 Ciao a tutti, mi servirebbe una info, ho il server in firma e vorrei aggiornare al DSM 7.2, come devo procedere? ___ Hi everyone, I need some info, I have the server under signature and I would like to update to DSM 7.2, how should I proceed? Quote Link to comment Share on other sites More sharing options...
DomZ Posted November 17, 2023 Share #4987 Posted November 17, 2023 Hello, I'm using TCRP with friends 0.0.9g, and I would like to know how to update loader to the last version. Thanks Quote Link to comment Share on other sites More sharing options...
DomZ Posted November 17, 2023 Share #4988 Posted November 17, 2023 il y a 9 minutes, DomZ a dit : Hello, I'm using TCRP with friends 0.0.9g, and I would like to know how to update loader to the last version. Thanks Ok, I've found out the answer. Seems that Peter Suh has 2 differents version of loader (with friends and without friends) and I'm on last version ! And it seems that the update is done automatically on starting 😍 I would love to see all efforts done on the same loader, instead of having many differents loaders (that surely already share a lot between them). They share a lot, but right now, as far I know, we can't switch between them even if I am very satisfied with @Peter Suh work. Thanks a lot ! Quote Link to comment Share on other sites More sharing options...
DomZ Posted November 17, 2023 Share #4989 Posted November 17, 2023 Another n00b question sorry ... Can I change the Synology model without loosing the actual configuration ? Right now I'm using DS923+ and I would like to give a try to DS3622+. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted November 18, 2023 Share #4990 Posted November 18, 2023 11 hours ago, DomZ said: Another n00b question sorry ... Can I change the Synology model without loosing the actual configuration ? Right now I'm using DS923+ and I would like to give a try to DS3622+. No configuration is lost when changing (migrating) between models. However, it is necessary to note whether the model's original platform was Intel-based or AMD. In cases where VMM does not work depending on the actual CPU, issues that make deep learning impossible in the DVA series have been identified. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted November 18, 2023 Share #4991 Posted November 18, 2023 On 11/10/2023 at 2:31 AM, boghea said: Hi all, I tried installing on a Dell T630 server (bare metal). While building the loader (once model, version, etc. is selected) at some point it fails with attached error. Any advice? Thank you. It looks like you had some unlucky use while I was typing while maintaining MSHELL. After building RS4021xs+ in the latest version, we confirmed that there were no problems. Quote Link to comment Share on other sites More sharing options...
foxbat Posted November 18, 2023 Share #4992 Posted November 18, 2023 kindly asking about the 7.2.1-69057-2 update thank you Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted November 18, 2023 Share #4993 Posted November 18, 2023 17 hours ago, Antonio92 said: Ciao a tutti, mi servirebbe una info, ho il server in firma e vorrei aggiornare al DSM 7.2, come devo procedere? ___ Hi everyone, I need some info, I have the server under signature and I would like to update to DSM 7.2, how should I proceed? If TCRP needs to be upgraded to a major version, the loader must be built to that version first. pocopico's TCRP must use WEBUI. My TCRP-Mshell needs to be built by going back to the menu where I originally built the loader. Afterwards, you can proceed with the upgrade (migration) process as instructed by the DSM installer. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted November 18, 2023 Share #4994 Posted November 18, 2023 3 minutes ago, foxbat said: kindly asking about the 7.2.1-69057-2 update thank you Follow the instructions in DSM and proceed with automatic or manual installation of the latest update 2 pat file. TCRP friend loader automatically performs a ramdisk patch (DSM smallfixversion update). Quote Link to comment Share on other sites More sharing options...
foxbat Posted November 19, 2023 Share #4995 Posted November 19, 2023 Thank you but It's not working(update frum U1. ( I did not see the VM in the netork after update) TEsted on VM. I have updated from GUI first. Quote Link to comment Share on other sites More sharing options...
Antonio92 Posted November 19, 2023 Share #4996 Posted November 19, 2023 On 11/18/2023 at 11:39 AM, Peter Suh said: If TCRP needs to be upgraded to a major version, the loader must be built to that version first. pocopico's TCRP must use WEBUI. My TCRP-Mshell needs to be built by going back to the menu where I originally built the loader. Afterwards, you can proceed with the upgrade (migration) process as instructed by the DSM installer. Non ho capito bene, devo prima aggiornare TCRP e poi procedere come un comune Synology aggiornando con il file pat? Se è così dove poso trovare la procedura per aggiornare TCRP? Ho paura di perdere il server... ___ I didn't understand well, should I first update TCRP and then proceed as a common Synology update with the pat file? If so, where can I find the procedure to update TCRP? I'm afraid of losing the server... Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted November 20, 2023 Share #4997 Posted November 20, 2023 22 hours ago, Antonio92 said: Non ho capito bene, devo prima aggiornare TCRP e poi procedere come un comune Synology aggiornando con il file pat? Se è così dove poso trovare la procedura per aggiornare TCRP? Ho paura di perdere il server... ___ I didn't understand well, should I first update TCRP and then proceed as a common Synology update with the pat file? If so, where can I find the procedure to update TCRP? I'm afraid of losing the server... 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted November 20, 2023 Share #4998 Posted November 20, 2023 On 11/19/2023 at 3:13 PM, foxbat said: Thank you but It's not working(update frum U1. ( I did not see the VM in the netork after update) TEsted on VM. I have updated from GUI first. The way you handled it in the GUI is fine. We are receiving reports that the update from 69057 U1 to 69057 U2 is smooth for some users, while other users are experiencing problems. I will also investigate in detail what the issue is. 1 Quote Link to comment Share on other sites More sharing options...
Antonio92 Posted November 20, 2023 Share #4999 Posted November 20, 2023 1 hour ago, Peter Suh said: Proverò al più presto possibile, intanto mi faccio un backup di dati e impostazioni, grazie! ___ I'll try as soon as possible, in the meantime I'll make a backup of my data and settings, thanks! Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted November 21, 2023 Share #5000 Posted November 21, 2023 On 11/19/2023 at 3:13 PM, foxbat said: Thank you but It's not working(update frum U1. ( I did not see the VM in the netork after update) TEsted on VM. I have updated from GUI first. Are you my TCRP-mshell user? Or are you a TCRP user on pocopico? The two TCRPs may have functional differences. I tested the version update with my Mshell and found no problems. There are changes to the patch script related to version 7.2.1. I will leave a separate inquiry to pocopico. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.