gazzac72 Posted March 5, 2022 Share #1326 Posted March 5, 2022 16 hours ago, Dvalin21 said: Have you tried it with the generated Mac? Also what version of tinycore are you using? still no joy i have put ds615xs on and done a sata remap even though the hdd are messed up just so i could run this command to see the layout dont know if it helps or clutching at straws now also wanted to say thankyou for taking time out to help me ash-4.4# sudo lspci -nnq 0000:00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6t h Gen Core Processor Host Bridge/DRAM Registers [8086:191f] (rev 07) 0000:00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06) 0000:00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chi pset Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) 0000:00:16.0 Communication controller [0780]: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 [8086:a13a] (rev 31) 0000:00:17.0 SATA controller [0106]: Intel Corporation Q170/Q150/B150/H170/H110/ Z170/CM236 Chipset SATA Controller [AHCI Mode] [8086:a102] (rev 31) 0000:00:1b.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #17 [8086:a167] (rev f1) 0000:00:1b.2 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #19 [8086:a169] (rev f1) 0000:00:1b.3 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #20 [8086:a16a] (rev f1) 0000:00:1c.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 [8086:a110] (rev f1) 0000:00:1c.1 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #2 [8086:a111] (rev f1) 0000:00:1c.2 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #3 [8086:a112] (rev f1) 0000:00:1c.4 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 [8086:a114] (rev f1) 0000:00:1d.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 [8086:a118] (rev f1) 0000:00:1f.0 ISA bridge [0601]: Intel Corporation Z170 Chipset LPC/eSPI Controll er [8086:a145] (rev 31) 0000:00:1f.2 Memory controller [0580]: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller [8086:a121] (rev 31) 0000:00:1f.3 Audio device [0403]: Intel Corporation 100 Series/C230 Series Chips et Family HD Audio Controller [8086:a170] (rev 31) 0000:00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Fami ly SMBus [8086:a123] (rev 31) 0000:00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection ( 2) I219-V [8086:15b8] (rev 31) 0000:03:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 02) 0000:06:00.0 Ethernet controller [0200]: Qualcomm Atheros Killer E2400 Gigabit E thernet Controller [1969:e0a1] (rev 10) 0000:07:00.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [ Alpine Ridge 4C 2015] [8086:1578] 0000:08:00.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [ Alpine Ridge 4C 2015] [8086:1578] 0000:08:01.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [ Alpine Ridge 4C 2015] [8086:1578] 0000:08:02.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [ Alpine Ridge 4C 2015] [8086:1578] 0000:08:04.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [ Alpine Ridge 4C 2015] [8086:1578] 0000:0b:00.0 USB controller [0c03]: Intel Corporation DSL6540 USB 3.1 Controller [Alpine Ridge] [8086:15b6] 0000:40:00.0 Non-Volatile memory controller [0108]: SK hynix BC511 [1c5c:1339] 0001:07:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) 0001:08:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) 0001:09:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) 0001:0a:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) not sure why it says xeon when its i7 6700 Quote Link to comment Share on other sites More sharing options...
danellis12561 Posted March 5, 2022 Share #1327 Posted March 5, 2022 7 hours ago, Dvalin21 said: I've noticed others have been able to update to update 3 on promox, but also a few baremetals without having to connect to a serial port. Do anyone have any thoughts on this? Any ideas on what could be the difference? Im using DS3622xs+ I'd like to get updated, too. But my box is already in "production" (ie: hosting all my media files for Plex for my family) and if anything gets hosed while testing it wouldn't be good. They've beheaded people and thrown them in the pit of fire for lesser infractions. Hahaha 2 Quote Link to comment Share on other sites More sharing options...
paro12 Posted March 5, 2022 Share #1328 Posted March 5, 2022 (edited) Did a search of this thread with no luck. Will this loader work with an AMD FX8350 cpu? I have some old hardware I'd like to repurpose. I notice that all of the builds are intel named processors. I've used the loader to build a DS3617xs build with the broadwell-7.0.1-42218 DSM build. When I boot from either USB or SATA i can find the synology device but it fails at 55% when loading the pat file. I have double checked VID:PID several times, but no luck. Wondering if it has something to do with the processor. Doing this on baremetal Thanks all. Edited March 5, 2022 by paro12 Quote Link to comment Share on other sites More sharing options...
silow Posted March 5, 2022 Share #1329 Posted March 5, 2022 (edited) Nevermind. Issue resolved using different USB stick! Edited March 5, 2022 by silow Issue Resolved Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 5, 2022 Share #1330 Posted March 5, 2022 4 hours ago, gazzac72 said: still no joy i have put ds615xs on and done a sata remap even though the hdd are messed up just so i could run this command to see the layout dont know if it helps or clutching at straws now also wanted to say thankyou for taking time out to help me ash-4.4# sudo lspci -nnq 0000:00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6t h Gen Core Processor Host Bridge/DRAM Registers [8086:191f] (rev 07) 0000:00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06) 0000:00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chi pset Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) 0000:00:16.0 Communication controller [0780]: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 [8086:a13a] (rev 31) 0000:00:17.0 SATA controller [0106]: Intel Corporation Q170/Q150/B150/H170/H110/ Z170/CM236 Chipset SATA Controller [AHCI Mode] [8086:a102] (rev 31) 0000:00:1b.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #17 [8086:a167] (rev f1) 0000:00:1b.2 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #19 [8086:a169] (rev f1) 0000:00:1b.3 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #20 [8086:a16a] (rev f1) 0000:00:1c.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 [8086:a110] (rev f1) 0000:00:1c.1 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #2 [8086:a111] (rev f1) 0000:00:1c.2 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #3 [8086:a112] (rev f1) 0000:00:1c.4 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 [8086:a114] (rev f1) 0000:00:1d.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 [8086:a118] (rev f1) 0000:00:1f.0 ISA bridge [0601]: Intel Corporation Z170 Chipset LPC/eSPI Controll er [8086:a145] (rev 31) 0000:00:1f.2 Memory controller [0580]: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller [8086:a121] (rev 31) 0000:00:1f.3 Audio device [0403]: Intel Corporation 100 Series/C230 Series Chips et Family HD Audio Controller [8086:a170] (rev 31) 0000:00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Fami ly SMBus [8086:a123] (rev 31) 0000:00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection ( 2) I219-V [8086:15b8] (rev 31) 0000:03:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 02) 0000:06:00.0 Ethernet controller [0200]: Qualcomm Atheros Killer E2400 Gigabit E thernet Controller [1969:e0a1] (rev 10) 0000:07:00.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [ Alpine Ridge 4C 2015] [8086:1578] 0000:08:00.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [ Alpine Ridge 4C 2015] [8086:1578] 0000:08:01.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [ Alpine Ridge 4C 2015] [8086:1578] 0000:08:02.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [ Alpine Ridge 4C 2015] [8086:1578] 0000:08:04.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [ Alpine Ridge 4C 2015] [8086:1578] 0000:0b:00.0 USB controller [0c03]: Intel Corporation DSL6540 USB 3.1 Controller [Alpine Ridge] [8086:15b6] 0000:40:00.0 Non-Volatile memory controller [0108]: SK hynix BC511 [1c5c:1339] 0001:07:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) 0001:08:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) 0001:09:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) 0001:0a:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) not sure why it says xeon when its i7 6700 You have three sata controllers Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] , Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] [8086:a102] , and ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 02). Which controller do you have the hdd connected to? Also, is AHCI enabled in the bios of your computer? Looks like Marvell, ASMedia, and Intel run on the same kernel source which is AHCI. So I would start fresh, make sure AHCI is enabled in bios and dont add the ext I told you before. I would imagine that the ahci module is included in the build, but if all of this still fails you will need to request for the ext for these devices to be added. You can do that Extension driver/module request Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 5, 2022 Share #1331 Posted March 5, 2022 5 hours ago, danellis12561 said: I'd like to get updated, too. But my box is already in "production" (ie: hosting all my media files for Plex for my family) and if anything gets hosed while testing it wouldn't be good. They've beheaded people and thrown them in the pit of fire for lesser infractions. Hahaha I like my head, its a good head! LOL 1 Quote Link to comment Share on other sites More sharing options...
danellis12561 Posted March 5, 2022 Share #1332 Posted March 5, 2022 5 hours ago, paro12 said: Did a search of this thread with no luck. Will this loader work with an AMD FX8350 cpu? I have some old hardware I'd like to repurpose. I notice that all of the builds are intel named processors. I've used the loader to build a DS3617xs build with the broadwell-7.0.1-42218 DSM build. When I boot from either USB or SATA i can find the synology device but it fails at 55% when loading the pat file. I have double checked VID:PID several times, but no luck. Wondering if it has something to do with the processor. Doing this on baremetal Thanks all. I had this problem when trying to build DS3617xs as well. Switched to DS3622xs+ and it worked fine. Quote Link to comment Share on other sites More sharing options...
gazzac72 Posted March 5, 2022 Share #1333 Posted March 5, 2022 5 hours ago, Dvalin21 said: You have three sata controllers Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] , Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] [8086:a102] , and ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 02). Which controller do you have the hdd connected to? Also, is AHCI enabled in the bios of your computer? Looks like Marvell, ASMedia, and Intel run on the same kernel source which is AHCI. So I would start fresh, make sure AHCI is enabled in bios and dont add the ext I told you before. I would imagine that the ahci module is included in the build, but if all of this still fails you will need to request for the ext for these devices to be added. You can do that Extension driver/module request yes ahci is turned on an done fresh install still same no m.2 show when adding them in cache an hdd not in order Quote Link to comment Share on other sites More sharing options...
cferra Posted March 5, 2022 Share #1334 Posted March 5, 2022 Nvme is a pcie connection so AHCI should have no effect on it working or not. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
cferra Posted March 5, 2022 Share #1335 Posted March 5, 2022 That disk that you are highlighting in the third image is a SATA SSD not an nvme. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
cferra Posted March 5, 2022 Share #1336 Posted March 5, 2022 How to have DS3622xs recognize nvme SSD cache drive (Maybe works on other models). https://r.tapatalk.com/shareLink/topic?share_fid=107315&share_tid=58072&url=https://xpenology.com/forum/index.php?/topic/58072-How-to-have-DS3622xs-recognize-nvme-SSD-cache-drive-%28Maybe-works-on-other-models%29%2E&share_type=t&link_source=appLoot at this. Maybe what you need for nvmeSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
paro12 Posted March 6, 2022 Share #1337 Posted March 6, 2022 Thanks all. Changed to DS3622xs+ with broadwellnk-7.0.1-42218. That got me over the first hurdle. But now it seems to install fully and goes to the 10:00 minute timer. When it gets to 0 its says "Something went wrong" and then ... nothing, I'm back at square one, where it says Welcome! and click to Install. Any thoughts? Quote Link to comment Share on other sites More sharing options...
cferra Posted March 6, 2022 Share #1338 Posted March 6, 2022 1 minute ago, paro12 said: Thanks all. Changed to DS3622xs+ with broadwellnk-7.0.1-42218. That got me over the first hurdle. But now it seems to install fully and goes to the 10:00 minute timer. When it gets to 0 its says "Something went wrong" and then ... nothing, I'm back at square one, where it says Welcome! and click to Install. Any thoughts? Is the Network card getting a link after the loader boots? Quote Link to comment Share on other sites More sharing options...
paro12 Posted March 6, 2022 Share #1339 Posted March 6, 2022 sorry.. very green on these things. Not sure what you mean by getting a link. After the loader boots find.synology.com finds the machine. Quote Link to comment Share on other sites More sharing options...
cferra Posted March 6, 2022 Share #1340 Posted March 6, 2022 Does it find it after the install? Quote Link to comment Share on other sites More sharing options...
paro12 Posted March 6, 2022 Share #1341 Posted March 6, 2022 3 minutes ago, cferra said: Does it find it after the install? Yup, but its status is still "not installed" Quote Link to comment Share on other sites More sharing options...
cferra Posted March 6, 2022 Share #1342 Posted March 6, 2022 I had that happen - my lsi controller was problematic- how are your hard drives connected?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
paro12 Posted March 6, 2022 Share #1343 Posted March 6, 2022 All SATA on the MB. AMD3+. 1 SSD on 0 and then 3 8TB SATA on 1-3. When I was trying to install 3617 and it failed on 55% on reboot it would show and warn that 4 drives would be overwritten. Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 6, 2022 Share #1344 Posted March 6, 2022 (edited) 4 hours ago, paro12 said: All SATA on the MB. AMD3+. 1 SSD on 0 and then 3 8TB SATA on 1-3. When I was trying to install 3617 and it failed on 55% on reboot it would show and warn that 4 drives would be overwritten. Are you using the pat file that is downloaded when you build the img or are you downloading it from the website Edited March 6, 2022 by Dvalin21 Quote Link to comment Share on other sites More sharing options...
paro12 Posted March 6, 2022 Share #1345 Posted March 6, 2022 I'm using WinSCP to transfer the .pat folder out of the /home/tc/redpill-load/cache/ after the loader builds and using that. I know that this is subjective based on hardware, but how long should the install take? It goes from 55% to 80% pretty quickly and then seems to jump to the 10 minute timer. The machine than reboots less than 2 minutes into that 10 minute wait window. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted March 6, 2022 Share #1346 Posted March 6, 2022 11 hours ago, paro12 said: Yup, but its status is still "not installed" @paro12 I had this experience, too. Clean installation of DS3622xs+ was attempted, but the DSM installation process was repeated. So, DS918+ 6.2.3 was first installed cleanly with jun loader, and then boot loader was replaced with DS3622xxs+ USB. At this time, it was changed to "Migration Possible" rather than "Not installed". Quote Link to comment Share on other sites More sharing options...
jensenjyli Posted March 6, 2022 Share #1347 Posted March 6, 2022 On 2/28/2022 at 12:14 AM, IG-88 said: add a serial com port and connect to it with a terminal, can be seen in this configuration, connection parameters can be seen in grub.cfg https://xpenology.com/forum/topic/7387-tutorial-dsm-6x-on-proxmox/?do=findComment&comment=147159 i use that on baremetal and virtualbox vm's Can share how to make ds918 dsm7.0.1 loader work on virtualbox, I only made the ds3615 work, but not other Quote Link to comment Share on other sites More sharing options...
jensenjyli Posted March 6, 2022 Share #1348 Posted March 6, 2022 On 1/25/2022 at 6:10 PM, PincoPalla said: Hello, actually it's very easy, it's like in vmware, only the commands are placed in different places, the machine is in virtualbox (like Linux oracle 64bit) I have configured 2048Mb of ram and 2 cpu (so I just have to do tests) , in the network section make sure you have selected network bridge and put aside the mac it gives you, now you have to take the RedPill image (redpill-DS918 + _7.0.1-42218_b1635406499), start Xpenology_Tool_V142 and with OSFMount open the image and select the first one (48Gb, make sure Read only drive is not checked) open the local disk boot / grub / grub.cfg at the bottom go to modify (both in the section for usb and in that for sata disk) the mac with the one that gave you the machine creation (if you want you can also modify the s / n with one that you always get from the xpenology tool, save, close and unmount the disk, open the local disk boot / grub / grub.cfg at the bottom go to modify (both in the section for usb and in that for sata disk) the mac with the one that gave you the machine creation (if you want you can also modify the s / n with one that always comes from the xpenology tool, save, close and unmount the disk, start StartwindV2v converter load the image and create a startup file vmdk (growable image). at this point meii of two files (image and vmdk in the created folder from virtualbox go to the storage section, select SATA controllers and add the vmdk file, then create hard drives always the same section you need, close and start the machine, "it should" start then the procedure is always the same, find.synology.com etc. etc. .putting it like this seems difficult, but on the practical and very easy side just follow what I wrote to you step by step Could you share which loader you download? I tried the latest ds918 and other all do not work, except ds3615xs can work https://github.com/tossp/redpill-tool-chain/actions/runs/1932774691 Quote Link to comment Share on other sites More sharing options...
synoxpe Posted March 6, 2022 Share #1349 Posted March 6, 2022 Anyone else getting installation failure of ds3622xs at 55%? I’m on ESXi 7 @Dvalin21 were you able to proceed? Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 6, 2022 Share #1350 Posted March 6, 2022 (edited) 3 minutes ago, synoxpe said: Anyone else getting installation failure of ds3622xs at 55%? I’m on ESXi 7 @Dvalin21 were you able to proceed? I didn't get that, though I installed on baremetal. When I was getting that on 3617 it was failing to create some boot folders. Not sure if this is the same case or not. You should be able to telnet and check. I'll have to find the command again and post it here Edited March 6, 2022 by Dvalin21 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.