painkiller895 Posted March 11, 2022 Share #1426 Posted March 11, 2022 (edited) 21 hours ago, eldi said: Hello everyone. I have a problem with a native network adapter on Dell R410's motherboard. After i installed DSM 7 on it using redpill the native network adapter stopped working, but the external intel PCI-e adapter is working well. How can I make my native network adapter work again? were you able to install ??? Did you try DS3622 like pocopico said... I got it to work with the Intel nic... Edited March 11, 2022 by painkiller895 Quote Link to comment Share on other sites More sharing options...
taiziccf Posted March 11, 2022 Share #1427 Posted March 11, 2022 Hi, where can i find a proper guide how to setup the SataPortMap and DiskIdxMap correctly? i am using Proxmox with Tinycore Redpill i had the SATA Controller passthrough to DSM7 in TinycoreLinux, i can see all 3 disk from that SATA controller, 8TB 4TB and 3TB total 3 disks. i run ./rploader.sh satamap now and generated and successfully build the loader. it seems Tinycore see that i have 4 SATA controller and it generate SataPortMap = 7587 however when i reboot and logged in to Synology, it only see 2 HDD which is a 4TB and 3TB, the 8TB is always not appear. i had tried different SataPortMap and DiskIdxMap combination, but the 8TB is always disappear, going back to Tinycore Linux it will appear again. kindly advice what can i do? Quote Link to comment Share on other sites More sharing options...
htanh034 Posted March 11, 2022 Share #1428 Posted March 11, 2022 I have successfully migrated an existing DSM 6.2.3-25426 Update 2/Jun Loader 1.03b/DS3617xs to DSM 7.0.1-42218 Update 3/Tinycore-redpill 0.4.6/DS918+ without any issues. Installation type: ESXI 7.0 U2 1 Quote Link to comment Share on other sites More sharing options...
m0nji Posted March 11, 2022 Share #1429 Posted March 11, 2022 Has anyone tried the Redpill Loader on Hyper-V? I could successfully convert the vmdk image to vhdx and build the 3622xs Loader. After reboot i stuck, probably because network is not working. 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 11, 2022 Author Share #1430 Posted March 11, 2022 Just now, m0nji said: Has anyone tried the Redpill Loader on Hyper-V? I could successfully convert the vmdk image to vhdx and build the 3622xs Loader. After reboot i stuck, probably because network is not working. I think there is no network module for hyper-v network card. Can you pass an lspci -nnq ? Quote Link to comment Share on other sites More sharing options...
m0nji Posted March 11, 2022 Share #1431 Posted March 11, 2022 2 minutes ago, pocopico said: I think there is no network module for hyper-v network card. Can you pass an lspci -nnq ? I guess you mean in the tinycore? With serial console and the booted loader: SynologyNAS> lspci -nnq -ash: lspci: not found At the tc: tc@box:~$ lspci -nnq 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) [8086:7192] (rev 03) 00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 01) 00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) 00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02) 00:08.0 VGA compatible controller [0300]: Microsoft Corporation Hyper-V virtual VGA [1414:5353] tc@box:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:11:32:9B:5F:F3 inet addr:172.20.21.207 Bcast:172.20.21.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3657 errors:0 dropped:1361 overruns:0 frame:0 TX packets:68 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1218370 (1.1 MiB) TX bytes:11645 (11.3 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:200 (200.0 B) TX bytes:200 (200.0 B) tc@box:~$ 1 Quote Link to comment Share on other sites More sharing options...
shibby Posted March 11, 2022 Share #1432 Posted March 11, 2022 @pocopico can you skip checking extension in build process if they are already downloaded? When i add my own module manually by "./rploader ext command" (atlantic.ko for example) or run "./rploader ext [...] auto" first, then build process failed because "module already exists". PS in https://github.com/pocopico/rp-ext/blob/main/atlantic/rpext-index.json "ds3622xs_42218" should be "ds3622xsp_42218" and in atlantic-4.4.180plus-broadwellnk.tgz file is missing crc-itu-t.ko module so in https://github.com/pocopico/rp-ext/blob/main/atlantic/releases/ds3622xsp_42218.json i had to remove line #20 "crc-itu-t.ko": "", Quote Link to comment Share on other sites More sharing options...
Aigor Posted March 11, 2022 Share #1433 Posted March 11, 2022 Today i'm updated my Gen8 from DS3617xs-6.2.3 to DS3622xs+DSM 7.0.1-42218, but still not get update 1 2 or 3, are there some steps that i need to perform to get, for example, upate 3 without issue? Thanks Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted March 11, 2022 Share #1434 Posted March 11, 2022 (edited) Trying to build DS1621+ also DS3622xs+ is Repo down or being updated ??? My Bad Bad USB stick all good now... Edited March 11, 2022 by painkiller895 Quote Link to comment Share on other sites More sharing options...
Marvx Posted March 11, 2022 Share #1435 Posted March 11, 2022 Hi, I have one question about videostation. Using DS3622xs+ DSM 7.0.1-42218. redpill tinycore 0.4.7 I installed virtual machine manager to test some things and i found that all things which not working on real DSM is working on VM on the same HW. The problem is that some videos don't play in webapp videostation and offline convert is not working as well. But when i install virtual machine with DSM 7.0.1 and same videostation the movie plays correctly and even offline conversion working with no problem. The same with auto-update not working on life DSM but VM is working corectly. I tried to update to DSM 7.0.1-42218ubdate3 and outcome VM ubdate no problem but real DSM got in to the recovery loop and i had to reinstall whole NAS. Why is everything working on VM but not in real DSM 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted March 12, 2022 Share #1436 Posted March 12, 2022 (edited) I share some results of the test with tc,ds1621+. The driver of r8169 does not seem to operate as the bootloader of ds1621+, which was well recognized as the HASWELL mainboard and ds3622xs+ bootloader. @jumkey told us to try the AMD platform, so I tried it with R8169 of Ryzen 3300x, 3500x, and 3700x, but it didn't work either. Rather, it operated normally when the 8th generation coffee lake cpu such as i5-8500t, j5040 (gemini lake refresh) and g5500 and r8169 (RTL8111H CHIPSET) were combined. This part had the help of @dolbycat. For now, ds1621+ seems to be a little tricky in using cpu. Just like Jun loader ds918+ supported from HASWELL in the past. More test data is needed for Sky lake, Kaby Lake, and other generations of CPUs. P.S : The focus is on NIC behavior rather than trying to find the hard drive with dtc. The extension driver was not applied manually. This is the result of using only r8169, which TC automatically finds. Edited March 12, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 12, 2022 Share #1437 Posted March 12, 2022 4 hours ago, Marvx said: Hi, I have one question about videostation. Using DS3622xs+ DSM 7.0.1-42218. redpill tinycore 0.4.7 I installed virtual machine manager to test some things and i found that all things which not working on real DSM is working on VM on the same HW. The problem is that some videos don't play in webapp videostation and offline convert is not working as well. But when i install virtual machine with DSM 7.0.1 and same videostation the movie plays correctly and even offline conversion working with no problem. The same with auto-update not working on life DSM but VM is working corectly. I tried to update to DSM 7.0.1-42218ubdate3 and outcome VM ubdate no problem but real DSM got in to the recovery loop and i had to reinstall whole NAS. Why is everything working on VM but not in real DSM That right there is the 10m dollar question. What is happening with the baremetal img that is or isn't happening with the vmdk image? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted March 12, 2022 Share #1438 Posted March 12, 2022 (edited) I have a very happy news today. It seems that there is no longer a need to think about adjusting the SataPortMap figures. In the past, as if the number of HDD physically connected to the Sataport in the Jun loader had to be recorded without caring about the number of ports. This is the method proposed by "TheSTREET," which is not active in the forum here but is active in NAS-related forums in Korea. The HotPlug (or HotSWAP) function of the built-in SATA port on the BIOS is changed to enabled. In this way, it does not matter if the SataPortMap=6, which was automatically found by the internal TC, is left from the DSM installation stage as shown in the attached image. Attached is the result of the test below. The error of turning off the Hot Plug, This is the result after HotPlug is turned on. If "TheSTREET" allows, we plan to create and post details related to this as topics in the future. Edited March 12, 2022 by Peter Suh 2 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted March 12, 2022 Share #1439 Posted March 12, 2022 17 hours ago, Peter Suh said: I share some results of the test with tc,ds1621+. The driver of r8169 does not seem to operate as the bootloader of ds1621+, which was well recognized as the HASWELL mainboard and ds3622xs+ bootloader. @jumkey told us to try the AMD platform, so I tried it with R8169 of Ryzen 3300x, 3500x, and 3700x, but it didn't work either. Rather, it operated normally when the 8th generation coffee lake cpu such as i5-8500t, j5040 (gemini lake refresh) and g5500 and r8169 (RTL8111H CHIPSET) were combined. This part had the help of @dolbycat. For now, ds1621+ seems to be a little tricky in using cpu. Just like Jun loader ds918+ supported from HASWELL in the past. More test data is needed for Sky lake, Kaby Lake, and other generations of CPUs. P.S : The focus is on NIC behavior rather than trying to find the hard drive with dtc. The extension driver was not applied manually. This is the result of using only r8169, which TC automatically finds. Ryzen's 3rd generation Matis has also confirmed that it is normally recognized as DS1621+, Realtec NIC with the tool-chain loader that @dolbycat introduced. I haven't done DTC work yet, so I checked if only LAN was activated. I think it will be available with DTC. I think you can put on Ryzen. Quote Link to comment Share on other sites More sharing options...
alienman Posted March 12, 2022 Share #1440 Posted March 12, 2022 Hi, I'm using DSM 7.0 DS3622xs+ tinycore redpill as a virtual machine with ESXi. All seems to work OK. However, I want to add a cache VIRTUAL disk hosted in a SSD datastore. The NVME (virtual) disk is detected by DSM. However, I can't use it because the SMART data fails... So I request if someone can create a shim for virtual nvme like the one done for the fake SMART for virtual disks: https://github.com/RedPill-TTG/redpill-lkm/blob/master/shim/storage/smart_shim.c I think then we can use "virtual" disks as HDD and VNME (SSD) inside DSM. And if we store the virtual disks in SSD and/or HDD datastores then we can obtain the best performance without the requirement of having physical hardware support. You agree? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted March 13, 2022 Share #1441 Posted March 13, 2022 (edited) Delete the contents because it is a duplicate inquiry. I'm sorry. Edited March 13, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
kirush80 Posted March 13, 2022 Share #1442 Posted March 13, 2022 (edited) Can't get IP for VM in Proxmox Virtual Environment 7.1-10 Цитата 06:12.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000] Цитата tc@box:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:88:D6 inet addr:192.168.100.120 Bcast:192.168.100.255 Mask:255.255.255.0 tried VirtIO and e1000 ./rploader.sh ext bromolow-7.0.1-42218 auto: Цитата It looks that you will need the following modules : Found VGA Controller : pciid 1234d00001111 Required Extension : No matching extension Found SATA Controller : pciid 8086d00002922 Required Extension : No matching extension Found SATA Controller : pciid 8086d00002922 Required Extension : No matching extension Found Ethernet Interface : pciid 1af4d00001000 Required Extension : No matching extension Update: Resolved -> change type proccessor to KVM64 Edited March 13, 2022 by kirush80 1 Quote Link to comment Share on other sites More sharing options...
sam juan Posted March 14, 2022 Share #1443 Posted March 14, 2022 anyone able to make the WOL working? installed ds3622xsp into qnap device. enable wake on lan on both 2 lan ports. when i shutdown, lan ports were blinking orange. tried several apps to send magic packets but it wont wake the device. tnx Quote Link to comment Share on other sites More sharing options...
htanh034 Posted March 14, 2022 Share #1444 Posted March 14, 2022 On 3/11/2022 at 10:15 PM, Aigor said: Today i'm updated my Gen8 from DS3617xs-6.2.3 to DS3622xs+DSM 7.0.1-42218, but still not get update 1 2 or 3, are there some steps that i need to perform to get, for example, upate 3 without issue? Thanks Same error for DS3622xs+DSM 7.0.1-42218 change to DS918+DSM 7.0.1-42218 update 3 it ok😀 Quote Link to comment Share on other sites More sharing options...
MajkelP Posted March 14, 2022 Share #1445 Posted March 14, 2022 On 3/11/2022 at 4:15 PM, Aigor said: Today i'm updated my Gen8 from DS3617xs-6.2.3 to DS3622xs+DSM 7.0.1-42218, but still not get update 1 2 or 3, are there some steps that i need to perform to get, for example, upate 3 without issue? Thanks Hi, How did you do? I mean I have got my custom build i5 3570K and I am using Jun's Loader 1.04b and DS3617xs, if I would like to update to DS3622xs+ what I need to do? Change the bootloader on my usb pendrive from Jun's to Redpill and install DSM 7.01-42218 on my current 6.2.3? Will this be treated as an update or a clean install and all hard drives will be formated? I was able to install DSM 7.01 on my VM and also on my 2nd custom build computer (NAS) but I am not quite sure about the update? Thanks, Quote Link to comment Share on other sites More sharing options...
Marvx Posted March 14, 2022 Share #1446 Posted March 14, 2022 (edited) On 3/12/2022 at 2:50 AM, Dvalin21 said: That right there is the 10m dollar question. What is happening with the baremetal img that is or isn't happening with the vmdk image? So do you have this problem as well or im the only one and i should look for problem on my NAS HW ??? Edited March 14, 2022 by Marvx Quote Link to comment Share on other sites More sharing options...
THDJ Posted March 14, 2022 Share #1447 Posted March 14, 2022 (edited) Hi, I have problem when i install DS3615XS. I use "Virtual Machine Manager" of DSM and this install stay blocked at 55%. The config of this VM is : 2vCPU 2 Gb RAM 10 Go HDD to SATA Boot(IMG 0.4.6) 15 Go HDD to SATA LAN Virtio I respect the procedure with the command "sudo ./rploader.sh build bromolow-7.0.1-42218" Whether I choose Sata or USB boot, I have the same error message. Can you help me please ? Thanks in advance THDJ Edited March 14, 2022 by THDJ Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted March 14, 2022 Share #1448 Posted March 14, 2022 @pocopico In the process of updating 0.4.7.1, which was upgraded 2 hours ago, As shown below, there is an error that cannot find the filetool.sh file, so what is this shell file? ------------------------------------------------------------ root@NAS4:/home/tc# ./rploader.sh update now Checking Internet Access -> OK Checking if a newer version exists on the repo -> There is a newer version of the script on the repo should we use that ? [yY/nN]y OK, updating, please re-run after updating Updating tinycore loader with latest updates ./rploader.sh: line 894: filetool.sh: command not found Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 14, 2022 Author Share #1449 Posted March 14, 2022 8 minutes ago, Peter Suh said: ./rploader.sh: line 894: filetool.sh: command not found You are running that as user root ? can you retry with user tc ? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted March 14, 2022 Share #1450 Posted March 14, 2022 44 minutes ago, pocopico said: You are running that as user root ? can you retry with user tc ? Sorry. I created a /home/tc folder in Synology Linux and git clone https://github.com/pocopico/tinycore-redpill.git I'm trying to build by receiving all the files. Synology is also Linux, so TC can be built without any problems. The filetool.sh file was identified as a file existing under /usr/bin of TC Linux. I download and use all the files listed on GitHub even in TC Linux. Here, the git clone https://github.com/pocopico/tinycore-redpill.git command is also used. Unnecessary things such as img.gz files are being cleaned up and the rest of the files are being used. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.