flyride Posted June 1, 2021 Share #1926 Posted June 1, 2021 1.04b loader is UEFI bootable. The only loader that does not support UEFI is 1.03b (BIOS or CSM required). Quote Link to comment Share on other sites More sharing options...
forfun83 Posted June 7, 2021 Share #1927 Posted June 7, 2021 my bad i would say 1.03b Quote Link to comment Share on other sites More sharing options...
Francesco73 Posted June 10, 2021 Share #1928 Posted June 10, 2021 Hello It has been a few years since I set up my HP NL 54 as a DSM. For a long time I did not restart the DSM. However, there was no power for a long time and UPS couldn't make it. Now the DSM starts but at some point the network card link goes off (Intel dual port E1000) My request / question: Can anyone tell me if and if so what steps I need to take to reset my system. It doesn't have to be a detailed tutorial. With a little self-help help, I should probably be able to do this. Thank you so much for the startup help. ... Francesco HP ProLiant NL 54 Modellname DS3615xs Prozessor: AMD Turion RAM 8192 MB NIC: Intel- Dual Port E1000 DSM-Version: DSM 6.2.3 ? probablily Quote Link to comment Share on other sites More sharing options...
dranivil Posted June 14, 2021 Share #1929 Posted June 14, 2021 Seeing that new hardware is coming to the market, the compatibility problems with the 1.04b loader, not being able to use the 1.03b with UEFI and not being able to update to 6.2.4 ... Do you think that a future 1.05 loader will come out that will solve these problems or is it something that is not expected? 2 1 Quote Link to comment Share on other sites More sharing options...
TINY Posted July 2, 2021 Share #1930 Posted July 2, 2021 😍NICE! Quote Link to comment Share on other sites More sharing options...
firelord Posted July 23, 2021 Share #1931 Posted July 23, 2021 On 6/14/2021 at 6:12 PM, dranivil said: Seeing that new hardware is coming to the market, the compatibility problems with the 1.04b loader, not being able to use the 1.03b with UEFI and not being able to update to 6.2.4 ... Do you think that a future 1.05 loader will come out that will solve these problems or is it something that is not expected? Best question. Would be good to know if anyone is working on a new loader or not :( Quote Link to comment Share on other sites More sharing options...
natxocc Posted August 5, 2021 Share #1932 Posted August 5, 2021 On 7/23/2021 at 1:10 PM, firelord said: Best question. Would be good to know if anyone is working on a new loader or not I think not. If someone would do it, he would answer before. Quote Link to comment Share on other sites More sharing options...
Aigor Posted August 5, 2021 Share #1933 Posted August 5, 2021 (edited) ThorGroup is working on Edited August 5, 2021 by Aigor 2 Quote Link to comment Share on other sites More sharing options...
SVYtech Posted August 11, 2021 Share #1934 Posted August 11, 2021 Can the loader mimic the Synology I have? Model number and serial? I'm asking because motion notifications do not work with the default install and I'm thinking it's Synology blocking the unrecognized devices from their cloud relay. Quote Link to comment Share on other sites More sharing options...
flyride Posted August 11, 2021 Share #1935 Posted August 11, 2021 Only if you have a DS918+, DS3617xs or DS3615xs 1 Quote Link to comment Share on other sites More sharing options...
DarkNAS Posted September 5, 2021 Share #1936 Posted September 5, 2021 So I have been trying to install Xpenology using: DSM Platform: DS3617xs DSM Vesion 6.2.0 to 6.2.3 Jun's Loader: 1.03b I have used multiple PAT files including all available from 6.2.0 thru 6.2.3 and all have failed with most having the following error, Wizard: err_patch (13) I had one or two fail with the error Wizard: error_version (10). Any help would be greatly appreciated. My hardware is as follows: SUPERMICRO MBD-A1SRi-2758F-O Mini ITX Server Motherboard DDR3 1600/1333 Kingston 32GB 204-Pin DDR3 SO-DIMM ECC Unbuffered DDR3 1600 (PC3 12800) Server Memory Model KVR16LSE11/8KF 4X WD Red Plus 1TB NAS Hard Disk Drive - 5400 RPM Class SATA 6Gb/s, CMR, 64MB Cache, 3.5 Inch - WD10EFRX Quote Link to comment Share on other sites More sharing options...
flyride Posted September 7, 2021 Share #1937 Posted September 7, 2021 Should be able to work okay but you might need extra.lzma driver update for the embedded NIC, or maybe even test with a plug in card like Intel CT. You should focus only on 6.2.3-25426. Earlier versions behave differently and you won't be able to test your changes properly if you are bouncing among them. Remember that DS3617xs requires CSM/Legacy boot mode in your BIOS. When and how are you receiving the Wizard error? Quote Link to comment Share on other sites More sharing options...
DarkNAS Posted September 14, 2021 Share #1938 Posted September 14, 2021 On 9/7/2021 at 3:36 PM, flyride said: Should be able to work okay but you might need extra.lzma driver update for the embedded NIC, or maybe even test with a plug in card like Intel CT. You should focus only on 6.2.3-25426. Earlier versions behave differently and you won't be able to test your changes properly if you are bouncing among them. Remember that DS3617xs requires CSM/Legacy boot mode in your BIOS. When and how are you receiving the Wizard error? I am receiving the wizard error on the Synology web page where you load the file onto the device. It will boot to around 47-52% stall and have the error. Quote Link to comment Share on other sites More sharing options...
Holger1965 Posted October 28, 2021 Share #1939 Posted October 28, 2021 Hi i‘d like to build on a Gen8 Hp Server My server is upgraded to XEON E3-1320v2 can i install the Imige for DS3617xs or the Image for DS3615xs ?? thanks for your help holger Quote Link to comment Share on other sites More sharing options...
Dfds Posted October 28, 2021 Share #1940 Posted October 28, 2021 41 minutes ago, Holger1965 said: Hi i‘d like to build on a Gen8 Hp Server My server is upgraded to XEON E3-1320v2 can i install the Imige for DS3617xs or the Image for DS3615xs ?? thanks for your help holger You can install either, however most Gen8 users use the DS3615 image. If you're doing a clean install go with 6.2.3 Quote Link to comment Share on other sites More sharing options...
DJGIGNEU83 Posted November 11, 2021 Share #1941 Posted November 11, 2021 On 11/13/2020 at 9:10 AM, XDOM said: Hi everyone The NAS is Up and Running after the installation of a supported Network card "Intel X550-T2 (PCI Express 3.0)", thank you a lot. I have some questions now. Whats about the CPU Cores showed in the GUI and ssh terminal? I assume that the 8 Cores bellow are 2(threads) x 4 Physical Cores showed in the DSM Info tab. Are the other 6 Physical Cores unused? grep -i --color "model name" /proc/cpuinfo model name : Intel(R) Core(TM) i9-10900 CPU @ 2.80GHz model name : Intel(R) Core(TM) i9-10900 CPU @ 2.80GHz model name : Intel(R) Core(TM) i9-10900 CPU @ 2.80GHz model name : Intel(R) Core(TM) i9-10900 CPU @ 2.80GHz model name : Intel(R) Core(TM) i9-10900 CPU @ 2.80GHz model name : Intel(R) Core(TM) i9-10900 CPU @ 2.80GHz model name : Intel(R) Core(TM) i9-10900 CPU @ 2.80GHz model name : Intel(R) Core(TM) i9-10900 CPU @ 2.80GHz Is the support of SRV-IOV for the Network Card "Intel X550-T2 (PCI Express 3.0)" not available in Xpenology? Whats about Transcoding Features of the CPU Intel Core i9-10900? Need some drivers, another module or extra/extra2.lzma? i found something about this here: Regards Hey ich habe die gleiche Hardware und das selbe Problem wie " XDOM" siehe : (Bios Einstellungen damit Juns Loader sich nicht aufhängt ( Curser blinkt nicht ) - GERMAN - XPEnology Community ) Wie hast du ihn zum laufen gebracht ohne das nach der auswahl der curser nicht blinkt und das keyboard auch anzeigt das er sich aufgehängt hat ??? lg. Quote Link to comment Share on other sites More sharing options...
ApHorst Posted December 4, 2021 Share #1942 Posted December 4, 2021 On 8/2/2018 at 5:09 PM, snakefox666 said: Did you update from previous version or it's a fresh install ? I'm curious because I have an N40L too Thanks mate ! by mine Hp N40L dosnt work, after the install, the assistant Synology cant find the server Quote Link to comment Share on other sites More sharing options...
jcgechevarria Posted December 10, 2021 Share #1943 Posted December 10, 2021 On 8/2/2018 at 1:42 AM, autohintbot said: Does the Haswell-or-later requirement still apply here? I am unable to get anything past the very first boot message (nothing shows up on network, no activity on serial port past the boot menu and initial message). Host: ESXi 6.5.0 Update 2 (Build 8294253) 2x Xeon E5-2670 on Intel S2600CP motherboard VM: Started by copying my working 6.1.x DSM setup, changing MAC address in VM config and synoboot.img. Existing VM was hardware version 12. Tried a few other ESXi starting points from here on the forums, upgrading to VM hardware version 13, etc. Same result across the board, both for 3615 and 3617 loaders. Really hoping a Sandy Bridge-compatible boot loader happens for DSM 6.2! I have a bunch of that hardware here in the house. Actually have some spare hosts--I'll try a bare metal test when I get a few extra minutes. This is not an error, it's the bootloader ...now you have to type http://find.synology.com on a web browser on a PC at the same network .... Quote Link to comment Share on other sites More sharing options...
ZaInT Posted January 13, 2022 Share #1944 Posted January 13, 2022 (edited) I pushed my Netgear RND2100 (Atom D510, 2 GB DDR2) to 6.2.3 before I threw 6.2.7 at it just for fun and it stopped booting. Gonna fiddle more with it some day, with 1.03b it took literally less than 10 minutes from start to boot & install. Even used a 128 GB USB 3 stick without any problems, I never would have thought that it would be so smooth. Have to cold boot and hold the backup-button everytime though if you don't want to overwrite the ReadyNAS OS. Edited January 13, 2022 by ZaInT Quote Link to comment Share on other sites More sharing options...
casinin Posted January 14, 2022 Share #1945 Posted January 14, 2022 hello, I have successfully installed with loader 1.03b a ds3615xs with 6.2.237, if I start manually the boot from usb starts, if I leave it in automatic the loader does not start. I tried to set the bios in uefi and the loader starts but I can't find the nas on the net. Can I use loader 1.04 on ds3615xs? Thank you Quote Link to comment Share on other sites More sharing options...
flyride Posted January 14, 2022 Share #1946 Posted January 14, 2022 1.03b does not support UEFI boot. 1.04b only supports DS918+ platform. Usually there is an option in your BIOS to configure boot order. It may look different when Legacy/CSM boot is enabled. Check your documentation carefully. 1 Quote Link to comment Share on other sites More sharing options...
casinin Posted January 14, 2022 Share #1947 Posted January 14, 2022 8 minutes ago, flyride said: 1.03b does not support UEFI boot. 1.04b only supports DS918+ platform. Usually there is an option in your BIOS to configure boot order. It may look different when Legacy/CSM boot is enabled. Check your documentation carefully. Thanks for the reply. I did all the tests with the bios setting. The problem is that in mbr it does not recognize the automatic start from usb (even if it makes me set it from bios) if, however, at startup I press F8 for the boot menu and choose the usb stick it starts quietly. It would not be a problem if not because I should put the PC up on a shelf where I have no monitor or keyboard Quote Link to comment Share on other sites More sharing options...
casinin Posted January 14, 2022 Share #1948 Posted January 14, 2022 i have another old pc that has 6 sata ports, is equipped with an AMD Dual-Core E2-3200, can xpenology run on this cpu? Thank you Quote Link to comment Share on other sites More sharing options...
flyride Posted January 14, 2022 Share #1949 Posted January 14, 2022 Post a new question with specific information about your motherboard and CPU in a support forum. https://xpenology.com/forum/forum/38-dsm-installation/ https://xpenology.com/forum/forum/82-general-questions/ Quote Link to comment Share on other sites More sharing options...
casinin Posted January 14, 2022 Share #1950 Posted January 14, 2022 1 hour ago, flyride said: Post a new question with specific information about your motherboard and CPU in a support forum. https://xpenology.com/forum/forum/38-dsm-installation/ https://xpenology.com/forum/forum/82-general-questions/ thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.