Pson Posted August 30, 2020 Share #76 Posted August 30, 2020 First try; Loader version and type: 1.04b without extras and DS918+ DSM version in use (including critical update): Clean install of DSM 6.2.3-25426 Update 2 Hardware details: HPE Proliant MicroServer Gen 10+ (P16006-421) + dedicated ilo5 card + 1 old WD Red 3TB ERFX Details: UEFI bios active and ilo card also connected to network without problem Comments: Only 2 out of 4 nic detected Second try: Loader version and type: 1.03b without extras and DS3617XS+ DSM version in use (including critical update): Clean install of DSM 6.2.3-25426 Update 2 Hardware details: HPE Proliant MicroServer Gen 10+ (P16006-421) + dedicated ilo5 card + 1 old WD Red 3TB ERFX Details: Legacy bios active and ilo card installed but not connected to network. Could been some hiccup in my network. Comments: All 4 nic's detected And to summarize, "out of the box" performance is much better with 1.03b and DS3617XS+ on the HPE MSG10+. Don't ask me why but simpel tasks take less than half the time. 1 Quote Link to comment Share on other sites More sharing options...
Spencer Posted September 2, 2020 Share #77 Posted September 2, 2020 Loader version and type: 1.04b DS918+ DSM version in use (including critical update): DSM 6.2.3-25426 (Unable to apply Update) Using custom modules/ramdisk?: no Hardware details: Asus J4005I-C LAN: Realtek RTL8111H Comments: Added a M.2 A+E Key Gigabit Ethernet Realtek RTL8111H working well Quote Link to comment Share on other sites More sharing options...
Xyzzy Posted September 9, 2020 Share #78 Posted September 9, 2020 Loader version and type: 1.04b DS918+ (no customizations) DSM version in use (including critical update): DSM 6.2.3-25426 Hardware details: AsRock J3455B-ITX, generic Marvell 88SE9215 PCIE controller /w 4x SATA III Comments: Fresh install on bare metal; 1st boot after installing DSM approx 15-20 mins, NAS not available; then automatic reboot and again setting up for 5-10 mins; then works normally. Quote Link to comment Share on other sites More sharing options...
diyhchan Posted September 23, 2020 Share #79 Posted September 23, 2020 Loader version and type (DS3615xs): 1.03a2 DS3615xs DSM version in use (including critical update): DSM 6.2.3-25426 Update 2 Using custom modules/ramdisk? If yes which one?: None Hardware details: Motherboard: ASUS P7H55-M | i5-650 | 4x4GB ; NIC: Realtek RTL8112L Quote Link to comment Share on other sites More sharing options...
allex Posted October 30, 2020 Share #80 Posted October 30, 2020 (edited) - Result: SUCCESSFUL (ONLY DS918+) - Loader version and model (clean install): Jun's Loader v1.04b - Version DSM: tried DSM 6.2.2-24922 and 6.2.3-25426 - Additional module extra.lzma, extra.2lzma: YES (also replace the zImage and rd.gz from the installed DSM for 6.2.3-extra918plus_v0.13.3, for 6.2.2 extra918plus_loader_1.04b_DSM 6.2.2.v0.8_std_mod) - Hardware: ASRock H310CM-HDV, BIOS P4.20 05/14/2019, RAM 8GB, Intel Pentium Gold G5420 - RAM: 2 x 4Gb DDR4, 2666 МГц, PC21300 - Ethernet: internal RTL8168h/8111h, and also tried external PCI-E DEXP ZH-GE1P, chip RTL8111E BIOS settings: - Use CSM - UEFI Only - Disable all unnecessary things, virtualization, and etc. IMPORTANT! - If you reinstall DSM several times (for example, you are experimenting), be SURE to delete all partitions from all disks, otherwise you will get error 13 during installation. DMESG list Edited October 30, 2020 by allex Quote Link to comment Share on other sites More sharing options...
allex Posted November 3, 2020 Share #81 Posted November 3, 2020 (edited) В 31.10.2020 в 00:34, allex сказал: - Result: SUCCESSFUL (ONLY DS918+) UPDATE: too working - DS3615xs 6.1 Jun's Mod V1.02b + extra3615_v4.9_test + rd.gz+zimage from pat file 6.1.7 Edited November 3, 2020 by allex Quote Link to comment Share on other sites More sharing options...
JasonDragon Posted November 24, 2020 Share #82 Posted November 24, 2020 Outcome of the update: SUCCESSFUL - DSM version prior update: 6.2.3-25426 update 2 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Alibaba Intel Celeron C3865u Skylake onboard, ITX form factor, 16gb RAM, 12 x SATA port via 3 x Marvell 88SE9215 onboard controller, PCIe 8x slot, Dual Intel 211 integrated NIC, 9 x 4TB drives - Additional Comment: Reboot required after update - Outcome of the update: SUCCESSFUL - DSM version prior update: 6.2.3-25426 update 2 - Loader version and model: JUN'S LOADER v1.0b - DS3615 - Using custom extra.lzma: NO - Installation type: BAREMETAL - SOYO J1900 Quad Core 2.4Ghz mATX board, additional Intel 1GB NIC, 4 GB RAM, LSI 8 port SAS controller, 8 x 5TB drives, 2 x onboard sata spare - Additional comments: Reboot required Quote Link to comment Share on other sites More sharing options...
Zaak Posted November 28, 2020 Share #83 Posted November 28, 2020 Loader version and type: 1.04b / DS918+ DSM version in use (including critical update): DSM 6.2.3-25426 Hardware details: HP ProDesk 600 G1, motherboard: Hewlett-Packard 18E7, PCI-E TP-LINK Archer T6E WLAN (Broadcom BCM4360)Using custom extra.lzma: NO Details: Everything fine, except WLAN - not working at all. Quote Link to comment Share on other sites More sharing options...
Coconuts Posted December 2, 2020 Share #84 Posted December 2, 2020 Loader version and type: 1.04b / DS918+ DSM version in use: install of DSM 6.2.3-25426 Update 2 Hardware details: Dell Poweredge T40, with 2 WD Red pro NAS drives Using custom extra.lzma: Yes, aswell as i915 mod BIOS: UEFI bios active, set to AHCI controller instead of Raid just in case. Notes: dropped in my NAS drives from my old ds212j, and DSM just picked up from where it left off, from before the switch - breezy Quote Link to comment Share on other sites More sharing options...
m4jk3l Posted December 8, 2020 Share #85 Posted December 8, 2020 Loader version and type: 1.04b DS918+DSM version in use (including critical update): DSM 6.2.3-25426 Update 2Using custom modules/ramdisk?: No.Hardware details: ASRock N3150M, 4Gb ram. LAN: Realtek RTL8111GR GigabitSATA3: unknown... to me... ;)Comments: clean install. Quote Link to comment Share on other sites More sharing options...
Badger Posted January 5, 2021 Share #86 Posted January 5, 2021 Loader version and type: 103b 3615xs DSM version in use (including critical update): DSM 6.2.3-25426 Update 3 Using custom modules/ramdisk? If yes which one?: Yes, extra.lzma for 3615 v0.11_test Hardware details: Motherboard - MSI ms-7641 version 3.0 (Socket AM3+) CPU - AMD Sempron 145 2.8Ghz 4GB DDR3 RAM NIC - Realtek RTL8111E Notes: Had to set PCI Video bios option from "auto" to "disabled" for it to boot (with network).... which I though was odd. Took a few hours of trial and error to find that. Happy New Year! Quote Link to comment Share on other sites More sharing options...
vvisor Posted January 7, 2021 Share #87 Posted January 7, 2021 (edited) Outcome of the Install: SUCCESSFUL - DSM version: 6.2.3-25426 update 3 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte H410M H (Micro ATX), Pentium G6400, 8 GB DDR4, 4 x SATA Onboard, PCIE x1 x 2, Realtek Onboard NIC 8118 Chipset, TPLink TG-3468 Addon, 4 x 2 TB SATA Drives - Additional Comment: Both LAN cards detected without any additional configuration or mod. Works Fine with UEFI boot Edited January 7, 2021 by vvisor Quote Link to comment Share on other sites More sharing options...
Nett1 Posted February 2, 2021 Share #88 Posted February 2, 2021 (edited) Outcome of the update: SUCCESSFUL - DSM version: 6.2.3-25426 update 3 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Installation type: BAREMETAL - Hardware: ASRock B365M Pro4, LGA1151 microATX, 6x SATA, CPU: Intel Core i5 9400 BOX, RAM: Crucial 16 GB DDR4 PC4-25600 - Additional Comment: Everything detected without additional configuration or mod Edited February 2, 2021 by Nett1 1 Quote Link to comment Share on other sites More sharing options...
T-REX-XP Posted February 7, 2021 Share #89 Posted February 7, 2021 On 5/22/2019 at 9:05 PM, Sass said: Loader: Jun's Loader v1.04b for DSM 6.2 (on USB 2.0 Stick Intenso Micro Line 4 GB) DSM: DSM 6.2.1-23824 Update 6 - DS918+ Bare Metal (build and installed in 05.2019) Motherboard: ASUS P11C-I (Mini-ITX) Chipset: Intel C242 CPU: Intel Core i3-8100 (Socket 1151v2) 4x 3.60GHz RAM: 2x 8GB G.Skill Aegis DDR4-2400 DIMM CL15 (running as DDR4-2100 according to BIOS) Integrated NIC: 2x Gb LAN (Intel I210-AT) HDDs SATA: 3x 8TB WD80EFAX (WD Red) SDD Cache: 2x 120GB Crucial BX500 (SATA) NVMe SDD: 512 GB WesternDigital/SanDisk PC SN520 (M.2 2242, PCIe 3.0) >> reported as model WD5000-BEVT in DSM Disk Manager >> NOT working, DSM displays "I/O-Error" in Disk Manager protocols Other than the NVMe SDD, the system works as a charm, including both GB-LAN ports. I removed the NVMe SDD. Also, I still have an SATA-Port available, so I'll add another big SATA SDD soon. Also, I plan to get a PCIe LAN Card with 2x 10GBE (RJ-45), but am currently unsure which model would be working out-of-Jun's-box. MANY THANKS to JUN and all Forum Members, who's information helped me pinpoint the necessary hardware for my Server!!! Hi. Could you please confirm that your MB supports HW video transcoding ? Quote Link to comment Share on other sites More sharing options...
JohnyDJ Posted February 7, 2021 Share #90 Posted February 7, 2021 On 2/2/2021 at 7:38 PM, Nett1 said: Outcome of the update: SUCCESSFUL - DSM version: 6.2.3-25426 update 3 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Installation type: BAREMETAL - Hardware: ASRock B365M Pro4, LGA1151 microATX, 6x SATA, CPU: Intel Core i5 9400 BOX, RAM: Crucial 16 GB DDR4 PC4-25600 - Additional Comment: Everything detected without additional configuration or mod Hello. does m.2 drives also detected and if transcoding works? Thank you very much for your answer. Quote Link to comment Share on other sites More sharing options...
soulcola Posted February 12, 2021 Share #91 Posted February 12, 2021 Result: SUCCESSFUL (DS918+) Loader version and model (clean install): Jun's Loader v1.04b Version DSM: DSM 6.2.3-25426 Update 3 Additional module extra.lzma, extra.2lzma: YES (only for HW transcoding, everything else work fine without it) Bare Metal Motherboard: ASRosck b365m-itx/ac Chipset: Intel B365 CPU: Intel Core i3-8100 (Socket 1151v2) 4x 3.60GHz RAM: 2x 4GB DDR4-2400 DIMM Integrated NIC: Intel I219V Quote Link to comment Share on other sites More sharing options...
ssarosi Posted April 29, 2021 Share #92 Posted April 29, 2021 (edited) Result: SUCCESSFUL (migration DS3615xs to DS918+) Old loader version: Jun's Loader v1.02b Old version DSM: DSM 6.1.7-15284 update 3 New loader version: Jun's Loader v1.04b New version DSM: DSM 6.2.3-25426 update 3 Additional module extra.lzma, extra.2lzma: NO Bare Metal Motherboard: GA-B250M-DS3H Chipset: Intel B250 CPU: Intel Core i5-6500 (Socket 1151v1) RAM: 8GB DDR4-2400 DIMM Integrated NIC: Realtek RTL 8111G Hard disk: 4 x 4 TB Seagate Ironwolf raid5 and 2 x 3 TB Seagate Ironwolf raid1 Edited April 29, 2021 by ssarosi 1 Quote Link to comment Share on other sites More sharing options...
Mathewww Posted May 1, 2021 Share #93 Posted May 1, 2021 Result: SUCCESSFUL Loader version: Jun's Loader v1.04b DSM: DSM 6.2.3-25426 Additional module extra.lzma, extra.2lzma: NO Bare Metal Motherboard: ASROCK J3355B-ITX CPU: Intel Dual Core J3355 RAM: 8GB DDR3 Integrated NIC: Realtek RTL8111GR Hard disk: 1 x 1 TB (will try later with 2 disk) Quote Link to comment Share on other sites More sharing options...
ssarosi Posted May 22, 2021 Share #94 Posted May 22, 2021 On 4/29/2021 at 7:10 PM, ssarosi said: Result: SUCCESSFUL (migration DS3615xs to DS918+) Old loader version: Jun's Loader v1.02b Old version DSM: DSM 6.1.7-15284 update 3 New loader version: Jun's Loader v1.04b New version DSM: DSM 6.2.3-25426 update 3 Additional module extra.lzma, extra.2lzma: NO Bare Metal Motherboard: GA-B250M-DS3H Chipset: Intel B250 CPU: Intel Core i5-6500 (Socket 1151v1) RAM: 8GB DDR4-2400 DIMM Integrated NIC: Realtek RTL 8111G Hard disk: 4 x 4 TB Seagate Ironwolf raid5 and 2 x 3 TB Seagate Ironwolf raid1 Disk hibernation not functional. Quote Link to comment Share on other sites More sharing options...
xPalito93 Posted August 23, 2021 Share #95 Posted August 23, 2021 (edited) RESULT - SUCCESSFUL Loader version and type: 1.03b & DS3617xs DSM version in use (including critical update): DSM 6.2.3-25426 Update 3 Using custom modules/ramdisk? If yes which one?: No Bare Metal Hardware details: Motherboard - ASROCK b460m Steel Legend CPU - Intel I3 10100f RAM - 2x4GB DDR4 RAM NIC - Intel 82574l (internal Nic wouldn't work, even with extra.lzma) Edited August 23, 2021 by xPalito93 Quote Link to comment Share on other sites More sharing options...
smoothmove Posted August 26, 2021 Share #96 Posted August 26, 2021 (edited) Success - without any install issues. Installed first time with reboot Loader version and type (918+/3615xs/3617xs): DS3617XS. Jun 1.03b DSM version in use (including critical update): DSM 6.2.3-24526 Update 3 Using custom modules/ramdisk? If yes which one?: Standard install in Legacy Hardware details (try being specific without giving long and useless technical details - model version, motherboard and NIC used should suffice): Machinist X99-K9 (Same as Machinist X99Z V102) E5-2699 V3 (HT disabled and restricted to 16 cores) 16gb - 4x4gb DDR4 2400 Intel X540-T2 10Gbe network (on board Realtek also works) PCIe 1x Nvidia 710 video Edited August 26, 2021 by smoothmove Quote Link to comment Share on other sites More sharing options...
aeros34 Posted October 4, 2021 Share #97 Posted October 4, 2021 (edited) Result: SUCCESSFUL (migration DS3617xs to DS918+) Old loader version: Jun's Loader v1.04b Old version DSM: DSM 6.2.3-25426 update 3 New loader version: Jun's Loader v1.04b New version DSM: DSM 6.2.3-25426 update 3 Additional module: extra.lzma, extra.2lzma: yes Bare Metal Motherboard: Supermicro X10SAE Intel® C226 LGA 1150 (Socket H3) ATX (vtd disable) Chipset: Intel C226 CPU: Intel E3-1285L V4 with Iris Pro Graphics P6300 (transcode HW OK) RAM: 8GB DDR3-1866 DIMM Integrated NIC: Dual Gigabit Ethernet LAN ports (1x Intel® i217LM & 1x Intel® i210AT) Disk: 11 x 3 TB MIXING SAS & SATA (RAID6) & 1 SSD read cache 256G Pcie: 2 x m1015 (flash LSI ) Edited October 4, 2021 by aeros34 Quote Link to comment Share on other sites More sharing options...
pthanhvan Posted November 17, 2021 Share #98 Posted November 17, 2021 On 2/3/2021 at 1:38 AM, Nett1 said: Outcome of the update: SUCCESSFUL - DSM version: 6.2.3-25426 update 3 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Installation type: BAREMETAL - Hardware: ASRock B365M Pro4, LGA1151 microATX, 6x SATA, CPU: Intel Core i5 9400 BOX, RAM: Crucial 16 GB DDR4 PC4-25600 - Additional Comment: Everything detected without additional configuration or mod hi, I am going to use the same mothetboard as yours (6 sata and 1 nvme m2). Should I write sataportmap 6 or 7? and can the 6.2.3 recognize the nvme m2 so that I can use it as cache? thanks Quote Link to comment Share on other sites More sharing options...
konglife Posted December 25, 2021 Share #99 Posted December 25, 2021 บน 12/27/2018 ที่ 9:44 PM, suschmania กล่าวว่า: รุ่นและประเภทตัวโหลด (918+): 1.04b2 DS918+ รุ่น DSM ที่ใช้อยู่ (รวมถึงการอัปเดตที่สําคัญ): DSM 6.2.1-23824 อัปเดต 2 ใช้โมดูล/ramdisk แบบกําหนดเองหรือไม่ ถ้าใช่อันไหน?: ไม่ รายละเอียดฮาร์ดแวร์: เมนบอร์ด: Biostar J3060NH; นิค: เรียลเทค RTL8111H การติดตั้งใหม่สําเร็จด้วย DSM_DS918+_23739.pat + อัพเดทภายในระบบ ยังไม่ได้ตรวจสอบการแปลงรหัสฮาร์ดแวร์ ฉันมีไบโอสตาร์ J3060NH โปรดแนะนําการติดตั้ง DSM ขอบคุณ Quote Link to comment Share on other sites More sharing options...
konglife Posted December 25, 2021 Share #100 Posted December 25, 2021 On 12/27/2018 at 9:44 PM, suschmania said: Loader version and type (918+): 1.04b2 DS918+ DSM version in use (including critical update): DSM 6.2.1-23824 Update 2 Using custom modules/ramdisk? If yes which one?: no Hardware details: Motherboard: Biostar J3060NH; NIC: Realtek RTL8111H Successfull fresh installation with DSM_DS918+_23739.pat + update inside System. Didn´t check Hardware transcoding, yet. I have Biostar J3060NH please advise DSM installation. thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.