xPalito93

Transition Members
  • Content Count

    13
  • Joined

  • Last visited

Community Reputation

0 Neutral

About xPalito93

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I've got a similar issue running redpill on esxi 7.0. I always get a message saying that the .pat is corrupted. Does pid/vid matter when using esxi? If yes, which should i enter? Or how do i find out what i should input?
  2. I'll probably have to stop here because i don't even know where to input those commands lol. Do i simply boot any linux OS on it an input those commands? I'm running DSM Baremetal if it's any help
  3. I built 3 different images now. One with TTG SaS activator; one with pocopico mpt2sas and one with mpt2sas+mpt3sas+mptsas. None of them detect any drives. I still get no drives found.
  4. I'm getting really close but i'm missing something and i don't know what. I use ./redpill_tool_chain build xxx ./redpill_tool_chain run xxx then i browse to /opt/redpill-load ./ext-manager.sh add 'https://raw.githubusercontent.com/RedPill-TTG/redpill-sas-activator/master/rpext-index.json' what comes after? if i exit and do ./redpill_tool_chain auto xxx the extension doesn't get added if i stay in the image and do ./build-loader.sh 'DS3615xs' '7.0-41222' i get an error saying "Failed to copy /opt/redpill-load/ext/rp-lkm/redpill-linux-v3.10
  5. Awesome I figured it out lol, now i just have to find out which extension i have to add for my SAS card. Pocopico has mpt2sas, mpt3sas and mptsas. Is there a list somewhere? And thank you for your input
  6. I'll have to wait then, because i only used haydibe's toolchain and i can't seem to find bundled-exts.json in there. So i guess it doesn't work with his toolchain
  7. Can somebody explain how to insert Drivers? I only played around with the v0.8-0.11 toolchain without using the ext-manager, so I only used the Build & Auto command. I'm trying to learn as much as possible but it's not that easy lol. I have a Fujitsu Server at work which i've been using to play around. It has a Fujitsu D2607-A21 GS2 SAS card in it, which has a LSI SAS 2008 chip on it. What would my steps be to create an image with those drivers in it? Can i do it with the 0.11 toolchain? I hope someone has time to guide
  8. Thanks for you Input. The first mistake i made, was that i selected USB boot on 1st boot. So I've got to give that a go tomorrow at work. How do you make sure loader is using sata 0:0 and HDD is using sata1:x? In the VM settings, i have two HDDs and they're configured as Sata0:0 and Sata0:1 if i recall correctly. Are those settings done in the grub aswell?
  9. I started playing around with the redpill on two test rigs i have at work the last couple of days. I have a HP AIO PC with a 6th gen I3 on it and two Sata drives. I tried installing 918 on it on baremetal and everything works without any issues for now. But today i started playing with ESXI 7.0 for the first time ever and i followed a tutorial posted a couple pages back. It boots and i can find it on find.synology.com and it even detects two drives because it tells me it will erase the two drives connected. But when i start the installation with th
  10. The redpill is new to me, so two days ago i decided to give it a go and look if i could get a test rig running. I tried the 0.8 and 0.9 tool and both would not work. The USB stick was never bootable. So i downloaded a precompiled image i found a couple pages back and tried it. Everything worked flawlessly after changing Pid, Vid and Mac address. I inspected both images by mounting the first partition with OSFmount ( the one i downloaded and those that i made myself with the tool ) and I noticed there were two folders missing.Both folders were the cause why it wouldn't boot.
  11. I'm running the same CPU but with a different mainboard and everything works Which NIC are you running? Onboard or a separate one?
  12. Hello, I've been running DSM without any issues for the last couple of weeks. I have a i3-10100F paired with a B460M Steel Legend and a Intel 82574L NIC ( couldn't get the onboard NIC working ) I've been using jun 1.03b loader with DS3617xs with the following version 6.2.3 I have a ds-30104-1/88se9230 SATA PCIe card aswell and it works without any issues whatsoever. Now i tried converting to a 918+ Image, but I couldn't get it to work with a drive plugged to the SATA card The issue i have is the following: 918+ boots without any issues without the S
  13. RESULT - SUCCESSFUL Loader version and type: 1.03b & DS3617xs DSM version in use (including critical update): DSM 6.2.3-25426 Update 3 Using custom modules/ramdisk? If yes which one?: No Bare Metal Hardware details: Motherboard - ASROCK b460m Steel Legend CPU - Intel I3 10100f RAM - 2x4GB DDR4 RAM NIC - Intel 82574l (internal Nic wouldn't work, even with extra.lzma)