pocopico
Developer-
Posts
1,753 -
Joined
-
Last visited
-
Days Won
123
Everything posted by pocopico
-
TinyCore RedPill loader (TCRP) - Development release 0.9
pocopico replied to pocopico's topic in Developer Discussion Room
Fixed -
TinyCore RedPill loader (TCRP) - Development release 0.9
pocopico replied to pocopico's topic in Developer Discussion Room
I've updated the TCPR config files -
TinyCore RedPill loader (TCRP) - Development release 0.9
pocopico replied to pocopico's topic in Developer Discussion Room
something is wrong, can you please try to rebuild using the latest image and HTML Builder ? -
TinyCore RedPill loader (TCRP) - Development release 0.9
pocopico replied to pocopico's topic in Developer Discussion Room
Your cmdline is incomplete. can you cat your /mnt/tcrp/user_config.json please ? -
help
pocopico replied to waspsoton's topic in General Installation Questions/Discussions (non-hardware specific)
During POST you are prompt to enter LSI menu for configuration, are you able to see your drives there ? Also if you try booting TCRP latest image do you see your drives with fdisk -l |grep sd ? -
TinyCore RedPill loader (TCRP) - Development release 0.9
pocopico replied to pocopico's topic in Developer Discussion Room
SCSI/SAS issue has been resolved by adjucting the disks addon. You can rebuild and try again. -
TinyCore RedPill Loader Build Support Tool ( M-Shell )
pocopico replied to Peter Suh's topic in Software Modding
WoL will work for Network Cards that support it, mainly onboard cards. You can try if you have a setting on BIOS for power on by PCI-E ? Like : Does your network card link stay on during power off ? -
I have the RC version installed already in one of my test systems and the feeling is that its not that stable as 7.1.1 is/was. Of course its your choice and you can decide whether the good operation is critical or not. If you have a stable system and there is no clear reason for you to upgrade, i would stay at 7.1.1 U6 (for now).
-
To my knowledge, Microservers G7 are having issues with kexec so no Friend for NXX. You can instead use the staticboot option on user_config.json and in case of an upgrade, selecting TCRP Friend will process an upgrade but will reboot and default to USB after that.
-
So you have a SN, you have a serial consisting of (N)umbers and (L)etters between the NNNNLLLNNNNNN . What are your letters ?
-
You might have wrong internalportcfg setting on synoinfo.conf. Can you please check by running : grep -i internalportcfg /etc/synoinfo.conf
-
Hi, DSM might have decided to perform a volume data scrubbing. This actually read and writes on the volume a lot and some slowness might be experienced during that process. Can you please check "Storage Manager" under storage -> Storage Poll and see whats the status ? You dont need to care much about the USB disk speed, thats only used to boot the kernel and ramdisk. DSM is stored on DISKS.
-
When you re-install you can select retain configuration. This will keep both your data and your configuration. If you dont have this option, it will warn you that your data will be lost. If you get that message then stop ! Boot from a live linux distro and get a backup of your data.
-
Hello everyone, sorry for the translation problems. So the problem with all buildroot loaders is that you can't kexec on HP Nxx because it causes a KP. You can instead try to start directly, e.g. selecting USB on boot and setting staticboot on user_config.json to true. https://github.com/pocopico/tcrpfriend/blob/0c8e4df9d38ee9da9db0c282aeb5cab90ec905ac/buildroot/board/tcrpfriend/rootfs-overlay/root/boot.sh#L620 Maintenant, après une mise à niveau DSM, vous pouvez sélectionner une fois le démarrage TCRP Friend, puis sélectionner USB une fois le correctif terminé.
-
TinyCore RedPill loader (TCRP) - Development release 0.9
pocopico replied to pocopico's topic in Developer Discussion Room
Its a try and error situation. See what works for your case. -
TinyCore RedPill loader (TCRP) - Development release 0.9
pocopico replied to pocopico's topic in Developer Discussion Room
No you can stop at count down of TCRP Friend by pressing <ctrl-c> Then you can type bfs and hit enter, this wil force DSM to boot in junior mode and you can re-install keeping configuration. -
TinyCore RedPill loader (TCRP) - Development release 0.9
pocopico replied to pocopico's topic in Developer Discussion Room
So the HTML Builder returned 0 ? Thats a value that DSM will not accept and in the past caused a KP. Thats good to know also. So since you've tried with the exact hardware configuration, Can you please change to SataPortMap=888 and DiskIdxMap=00 -
TinyCore RedPill loader (TCRP) - Development release 0.9
pocopico replied to pocopico's topic in Developer Discussion Room
Can you please specify the above ?