All Activity

ah, das ist mir entgangen. nein, ich kann weder die ip, ueber die ich eingerichtet, noch die ip, die er mir neu anzeigt eine verbindung aufbauen. dann versuch ich jetzt mal mit einer dhcp addi zu arbeiten, vielleicht klappts dann ja .-/

Hey guys, Running DSM 6.0.2 My raid group 1 is set to be Raid 5 and when I created it set the max drive number in raid to be 6 because I probably thought I’d never need more storage than that. The raid pool currently has 6 WD Red Plus 10TB drives. I just bought 5 more drives (WD Red Plus 10TB) and ideally want to expand my raid 5 group so I don’t lose 9TB’s by having two different raid 5 pools. Is it possible to change this setting? If not can I make a new raid pool with a max of 12 or 24 drives and bring the drives from raid group 1 in without losing any of my data?

@StandBugz do you have such a backup of your DOM? How urgent is it, and in which country/time zone are you based?

Hello, I have summarized the many requests/problems here, with accompanying model upgrade, in a new topic, you are welcome:

thank you so much for telling me about auxxxilium. i had all but given up on tcrp. it was so hit and miss on older hardware that i had to recreate so many usb drives. and even when it did finally boot dsm, it would never install detect the drives or fail to install dsm. almost nowhere in the forums were there much mention of arc loader or tcrpfriend, much less a tutorial. i just have one last question if you or anyone could answer. is AHCI a must for any DSM configuration? i have several really old pcs like dell optiplex 380 or 390 that only have ATA as an option. no AHCI or RAID. those pcs just will not find any drives when booted into DSM. are those just SOL? i've tried DS3622xs, DS3615 and DS3617 but no luck

https:ipc.net/products/h670-q670-8-bay-nas-motherboard-support-intel-12-13-14th-cpu-3x-m-2-nvme-8x-sata3-0-2x-intel-2-5g-network-port-hdmi-dp-4k-60hz-vpro-enterprise-class-commercial-nas-board

https:ipc.net/products/h670-q670-8-bay-nas-motherboard-support-intel-12-13-14th-cpu-3x-m-2-nvme-8x-sata3-0-2x-intel-2-5g-network-port-hdmi-dp-4k-60hz-vpro-enterprise-class-commercial-nas-board He can shop to UK

Hello, need some for my old DS1813+ that looks dead… Blue Power Led blinking and blinking… so… need to replace the USB DOM or place the right stick. thx, greg.

The Syncfusion JavaScript UI controls library is the only suite that you will ever need to build an application since it contains over 85 high-performance, lightweight, modular, and responsive UI components in a single package.

Hello, I have a quick Question. Does anybody have this driver for the ds6515? Unfortunately, the downloads from these two hosters are no longer available.

das hier nichts mehr reagiert ist auch so gewollt. Aber ohne IP Adresse kommst du an dieser Stelle nicht weiter. Versuche dann auf die URL-Adresse IP:5000 (IP wo du das PAT hochgeladen hast) zu zu greifen. Ist die konfigurierte statische IP wirklich notwendig? Vielleicht gibt es hier einen Bug im Loader.

Salut Dorian, As-tu un NAS originel de Synology? Si ce n'est pas le cas, les tomber le QuickConnect, dans le cas contraire, fait appel au support ou a la Communauté Synology. A++

Hello all, after my last aborted attempt to upgrade, and this time seems to have gone better with rr-24.5.1.img installing DS3622xs+ version 7.1-42962. This is on an AMD FX-8120 that has been running DSM 6.x for years. Everything installed great this time and I loaded DSM just fine, and I have only one issue: only the 6 drives connected to the the motherboard SATA ports show up, the 4 drives connected to my PCI SATA III card are not showing up in the storage manager. When I boot into the rr.img, I can see all of the drives under /dev/sdX so clearly there's a linux driver. Did I perhaps miss a step during the install? I thought all of the drivers were checked. Or is it perhaps because I installed 7.1-42962 rather than the 7.1.0-42661 shown in the loaders and platforms table? Any help is much appreciated.

afair its about how the partitions are set up initially in the img file used to prep the usb drive the partiton itself should already have a drive letter try to start your editor (notepad++ should be ok for linux based files and windows default editor is not suggested) with elevated right like right click on the shortcut (or exe) and choose "run as administrator" if you then go to "open file" and choose the drive letter in question you should now be able to access the config file jun's loader and dsm 6.2 are outdated and kind of hard(er) to use then recent loaders for dsm 7.x i would highly recommend to check out arc loader (www.auxxxilium.tech) or tcrpfriend loader (https://github.com/PeterSuh-Q3/tcrpfriend) both are menu based and easy to use, you might also check for youtube content to get some more guidance if needed

First -> Do a backup if is possible. Second -> Do upgrade to latest DSM.

Je laisse parfois le NAS allumé le temps de travailler avec le reste du temps j’utilise le paquet de gestionnaire d’alimentation avancée. il est paramétré pour le mettre en extinction si aucune connexion ou aucun équipement ou aucune ressource réseau

somehow, i was able to create a usb drive using jun's loader and playing around with it, i saw where to change the mac address and serial number, etc. i am using DS3615xs. there were 3 partitions in the usb drive, 2 of them were viewable in windows. since then, i recreated the usb drive, but now only 2 partitions show up in windows. the 3rd is missing and has no drive letter in windows. the only viewable partition has only 3 files. extra.lzma rd.gz zImage how do i get the other one to show up to edit the config?

les temps de démarrage sont corrects pour moi et merci ludo

Vous utilisez le WOL pour laisser le NAS en veille la plus part du temps ? Vu le temps de boot du N54L c'est pas un peu chiant ?

here's my model.conf any advice what to correct? model.conf

Salut alors pour le WOL, plusieurs outils selon mon support utilisé Sur ios : Wake-On-Lan ou Wake Me Up sur Mac : j’ai un utilitaire réseau Via le web portail Free lorsque je suis également à l’extérieur.

@Schmill, haven't tried yet. I'll post here if in case I become brave enough to do it...

Did you solve your issue?

Did you try this @mike_n54l ? I am on 6.1.7-15284, but wondering the same thing...

Вентиляторы только в больших моделях, на два аккумулятора, где один, его нет (я не встречал). Большой вам точно ненужен По модели и вентилятор найти можно, да заменить его