SSS_Viva Posted April 20, 2023 Share #201 Posted April 20, 2023 6 часов назад, 7up_ сказал: Did you have to replace the connector? Quote Link to comment Share on other sites More sharing options...
7up_ Posted April 20, 2023 Share #202 Posted April 20, 2023 I've already said it at least once... You have to remove the mini USB socket from the DOM because it's low profile and won't mount properly on the Motherboard header pins. You replace it with a standard mini USB female socket, same as what's on the Synology DOM. Of course before doing any of this you reflash the controller chip first otherwise you might actually do all of this and then find out you don't know how to flash it or worse its DOA! I'll say it again, it's a lot easier to use a thumb drive plugged in the front USB port. Happing modding. Quote Link to comment Share on other sites More sharing options...
Lucky1234 Posted April 21, 2023 Share #203 Posted April 21, 2023 Hello, I want to show off the revived DS 412+ today. The tired old USB-DOM was to blame. I would like to thank everyone here on the forum who helped and advised me with this. And namely DSfuchs, for his patience and great advice for me. Thanks to all. Lukas 2 Quote Link to comment Share on other sites More sharing options...
7up_ Posted April 22, 2023 Share #204 Posted April 22, 2023 (edited) disregard Edited April 22, 2023 by 7up_ Quote Link to comment Share on other sites More sharing options...
SSS_Viva Posted May 16, 2023 Share #205 Posted May 16, 2023 Received USB DOM, the installation was successful. Next CPU 🤪. 1 Quote Link to comment Share on other sites More sharing options...
EricT Posted May 31, 2023 Share #206 Posted May 31, 2023 Hi, I managed to get my DS412+ running as a DS713+ on DSM 7.0.1-42218 Update 6 version. The proven procedure of @DSfuchs works just fine (Thank you) ! After that I tried to manually upgrade to DSM 7.1-42661 Update 1 but that fails with error: Incompatible Upgrade File. Any suggestions what to change to make it work ? 1 Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted May 31, 2023 Share #207 Posted May 31, 2023 (edited) Hello, this is normal misconduct by the manufacturer. I'll take a look at the workaround description. Here you are: First upgrade the 6.2.4 to 7.0.1. Then comes the trick from grisu: I found a way to get to 7.1. You simply change the contents of the /etc/VERSION file to an old version. Then restart and the message migration appears in the web client. Import the DSM version specified in the migration path and then after the migration to version 7.1 update 2. But then you have to adapt the /etc/defaults/synoinfo.conf file again with the parameters mentioned. Best regards Edited May 31, 2023 by DSfuchs 1 1 Quote Link to comment Share on other sites More sharing options...
EricT Posted June 2, 2023 Share #208 Posted June 2, 2023 @DSfuchs, I managed to upgrade my old DS412+ all the way to DSM 7.1.1 Update 5 (Latest). Thanks for your advise. Regards, 2 Quote Link to comment Share on other sites More sharing options...
jmia Posted June 23, 2023 Share #209 Posted June 23, 2023 On 6/2/2023 at 12:26 PM, EricT said: @DSfuchs, I managed to upgrade my old DS412+ all the way to DSM 7.1.1 Update 5 (Latest). Thanks for your advise. Regards, Hello, could you put the parameters to modify in the /etc/defaults/synoinfo.conf, I've been looking for them and I can't find them, thanks @DSfuchs Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted June 23, 2023 Share #210 Posted June 23, 2023 (edited) You will find this here in #76: As a DS713+, you still have to change values in the /etc.defaults/synoinfo.conf file to: maxdisks="4" internalportcfg="0xf" Edited June 23, 2023 by DSfuchs Quote Link to comment Share on other sites More sharing options...
jmia Posted June 28, 2023 Share #211 Posted June 28, 2023 On 6/23/2023 at 4:34 PM, DSfuchs said: You will find this here in #76: As a DS713+, you still have to change values in the /etc.defaults/synoinfo.conf file to: maxdisks="4" internalportcfg="0xf" @DSfuchs I have a DS412+ transformed into an RS814+ with version DSM 7.1-42661 Update 4 and it won’t let me update to version 7.1.1-42962 Update 6. Checking the file you indicate /etc.defaults/synoinfo.conf, I have the correct values. Do you know what could be happening and why it won’t let me update? Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted June 29, 2023 Share #212 Posted June 29, 2023 As it says, entry #76 is for DS713+! Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted June 29, 2023 Share #213 Posted June 29, 2023 (edited) Problems during an update can be a "normal" error caused by the manufacturer. Check the internet for the error, or let me know what exactly isn't working. Does the problem exist via the GUI ...? Surely you have to install 7.1.1-42962 (with Update 1) first. Consider entry #207 and #208. Also doesn't it work with a fresh installation on a single spare drive without the full install on the hard drives? Edited June 29, 2023 by DSfuchs Quote Link to comment Share on other sites More sharing options...
jmia Posted June 30, 2023 Share #214 Posted June 30, 2023 Manual DSM Update When I try to update with version 7.1.1-42962 (with Update 1), first the file is uploaded and then the following message comes out directly that I put in the capture. Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted June 30, 2023 Share #215 Posted June 30, 2023 Then first you should try: 7.1.1-42962-5 Quote Link to comment Share on other sites More sharing options...
vanadium Posted July 3, 2023 Share #216 Posted July 3, 2023 Hi. Probably the wrong part to ask this, but is it possible to make na new internal USB or external USB for my 412+ with open media vault? I would like to use OMV on my synology. Has anyone managed ti install a linux on synology? b.r. Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted July 3, 2023 Share #217 Posted July 3, 2023 Hello, unfortunately this is no longer possible. Most recently it worked for me with a DS710+, but that's much too weak. Today my debian 32bit + OMV is running on a Thecus N2810PRO hardware. Quote Link to comment Share on other sites More sharing options...
jmia Posted July 6, 2023 Share #218 Posted July 6, 2023 On 6/30/2023 at 2:26 PM, DSfuchs said: Then first you should try: 7.1.1-42962-5 other error Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted July 6, 2023 Share #219 Posted July 6, 2023 2 hours ago, jmia said: other error Also doesn't it work with a fresh installation on a single spare drive without the full install on the hard drives? Quote Link to comment Share on other sites More sharing options...
jmia Posted July 7, 2023 Share #220 Posted July 7, 2023 (edited) On 7/6/2023 at 11:25 AM, DSfuchs said: Also doesn't it work with a fresh installation on a single spare drive without the full install on the hard drives? So I remove all 4 disks and put in an empty one and do a clean installation from scratch? Edited July 7, 2023 by jmia Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted July 8, 2023 Share #221 Posted July 8, 2023 (edited) Yes, when the desired update level is reached, discard the replacement hard disk and start again with the 4 data hard disks. After the migration, everything should be fine. If the update cannot be carried out on the replacement hard drive, you must first downgrade there to a maximum of 6.2.4-U5 as described here in the thread. Edited July 8, 2023 by DSfuchs Quote Link to comment Share on other sites More sharing options...
Sparqq Posted September 20, 2023 Share #222 Posted September 20, 2023 I have trouble getting the files of the flash, anyone willing to share it? Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted September 21, 2023 Share #223 Posted September 21, 2023 Yes I can, whow is the status of your NAS. Did you follow #90 ? Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted September 21, 2023 Share #224 Posted September 21, 2023 (edited) 10 hours ago, Sparqq said: I have trouble getting the files of the flash, anyone willing to share it? Yes I can, how is the status of your NAS. Did you follow #90 ? Edited September 21, 2023 by DSfuchs Quote Link to comment Share on other sites More sharing options...
Sparqq Posted September 22, 2023 Share #225 Posted September 22, 2023 (edited) 18 hours ago, DSfuchs said: Yes I can, how is the status of your NAS. Did you follow #90 ? I wish I could do that, I'm one of the "lucky" DS412+ users who has a failed USBest chip so the unit is not booting up. So I'm looking for someone who is willing to share the image, ofcourse the SN can be stripped out of the image. I've replaced the chip already, but still it doesn't show up in windows (or boots the DS412+) Edited September 22, 2023 by Sparqq Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.