Drivers requests for DSM 5.2


Recommended Posts

Has Anyone installed on Asus Server board with Pike LSI card. The reason I ask is I have Asus Server board on my PC with a Pike LSI controller board all run great but does not see drives on the Pike LSI controller. Is there any driver that I should install.

 

Thank You Nicodemus.

Link to post
Share on other sites

Hi Trantor,

 

the changelog of Beta8 says "Add multimedia dvb drivers (include all drivers available in kernel sources as module)".

But my TV card does not want to run. It uses ddbridge.ko, but I can't insmod it:

insmod: can't insert '/lib/modules/ddbridge.ko': unknown symbol in module, or unknown parameter

I've done a modinfo under Debian Wheezy: ddbridge depends on dvb-core and i2c-core. But these two modules are not in Beta8`/lib/modules.

 

Next I would like to reduce power consumption of my N54L. In the hope that I can use the firmware files from Wheezy, I need following kernelmodules: radeon, ttm, power-supply and i2c-algo-bit.

 

Can you please add these "missing" modules?

 

Thx in advance

Alchemi

Link to post
Share on other sites

Hi Tantor, please can you review a link http://xpenology.trantor.be/beta/mellanox.7z please ?

It is not possible to download :sad:

Thank you much

Mirek

 

 

 

Unfortunately i want to use my 10G NIC (HP NC523SFP) which doesn't show up in WebGUI.

 

Link : http://xpenology.trantor.be/beta/qlcnic.ko

Copy the module to /lib/modules and insmod it :wink:

I'm curious about performance with this ^^

 

Will be included in next repack.

 

Mellanox ConnectX® InfiniBand (MHGH28-XTC) 10GB ethernet 30€ dual port card on ebay. Cheap 10 GB ethernet :smile:

 

Link : http://xpenology.trantor.be/beta/mellanox.7z

 

Same as above, copy .ko files to /lib/modules and insmod mlx4_core.ko then mlx4_en.ko

Link to post
Share on other sites
  • 3 weeks later...
Hi Tantor, please can you review a link http://xpenology.trantor.be/beta/mellanox.7z please ?

It is not possible to download :sad:

Thank you much

Mirek

 

I just re-upload the file :wink:

 

 

Trantor or anyone is it possible to use these modules for DSM 5.0-4458 using Nanoboot?

 

 

i also have a mellanox card and using this module for for DSM 5.0-4458 does not work however using the beta 8 for 4.3-3827 it can recognize my Mellanox card just fine.

 

I am not sure if i need to do somthing special to make this work for 5.0-4458.

 

 

Thanks.

Link to post
Share on other sites

Trantor please can you compile update /lib/modules/alx.ko

the ethernet driver ALX (atheros AR8171),

i'm using in DSM 5.0.4493 Update 3, NanoBoot 5.0.3.1 for DSM 5.0.4493

 

NAS> dmesg | grep alx
[    3.530744] alx 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.530756] alx 0000:03:00.0: setting latency timer to 64
[    3.541245] alx 0000:03:00.0: eth1: Qualcomm Atheros AR816x/AR817x Ethernet [00:11:32:8e:3a:ff]
[    9.043874] alx 0000:03:00.0: irq 43 for MSI/MSI-X
[    9.044825] alx 0000:03:00.0: eth1: NIC Up: 100 Mbps Full

 

NAS> dmesg | grep Atheros
[    3.541245] alx 0000:03:00.0: eth1: Qualcomm Atheros AR816x/AR817x Ethernet [00:11:32:8e:3a:ff]
[    3.547498] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    3.547500] Copyright (c) 2007 Atheros Corporation.
NAS2> lspci -nn | grep 03:00.0
03:00.0 Class [0200]: Device [1969:10a1] (rev 10) 

 

tcp        0  90888 10.210.182.139:32469    10.210.177.112:47823    ESTABLISHED 18667/Plex DLNA Ser

 

But RX and TX packets are ZERO

 

NAS> ifconfig | grep eth1
eth1      Link encap:Ethernet  HWaddr 00:11:32:8E:3A:FF
         inet addr:10.210.182.139  Bcast:10.210.191.255  Mask:255.255.240.0
         inet6 addr: fe80::211:32ff:fe8e:3aff/64 Scope:Link
         UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:18

 

thanks in advance

Link to post
Share on other sites
Trantor please can you compile update /lib/modules/alx.ko

the ethernet driver ALX (atheros AR8171),

i'm using in DSM 5.0.4493 Update 3, NanoBoot 5.0.3.1 for DSM 5.0.4493

 

Sorry but I don't have anytime to do it and I don't have the nanoboot sources.

You can download the Syno GPL sources (5.x branch) and the latest alx driver sources and compil it :wink:

 

Search in the forum compiling drivers have been discuss many time.

Link to post
Share on other sites
  • 3 weeks later...
  • 1 month later...
Please add: Marvell Yukon 88E800

It seems to work, but I get a weird IP adress assigned. 169.x.x.x range.

Tried trantor and Nanoboot versions

 

Full mobo specs: http://www.newegg.com/Product/Product.a ... 6813131029

 

I know it's old....

 

That looks like a DHCP issue so maybe you could try trouble shooting that first as it may not be a driver related problem. The 169.x.x.x range is an APIPA (Automatic Private IP Addressing) or Link Local address, which is generated by the system when no IP address is provided by a DHCP server.

Link to post
Share on other sites
  • 2 weeks later...

Hi love your work here.

 

are there drivers available for this combo?

 

Intel Core i5 4440 3.10 GHz Socket 1150 6MB Cache Processor BX80646I54440

 

P8H61-I Intel S1155 Asus Mini ITX Motherboard

 

many thanks!!

 

Keep up the great work!

 

thank you

 

how about combo?

 

ASRock Z97E-ITX/AC, Intel Z97, S 1150, DDR3, SATA III 6Gb/s, SATA RAID, PCIe 3.0

 

and

 

Intel Pentium K Anniversary G3258 S1150 Haswell Dual Core 3.2GHz

 

would it be a supported combination?

 

if so how do i make a request/donation?

Link to post
Share on other sites
  • 2 weeks later...

Hi, please support drivers Wifi and Bluetooth on motheboard?

 

Goto settings DSM synology wifi and error insert usb adapter and wifi. My motherboard it support hardware wifi. It will support on DS version drivers gigabyte?

 

Motheboard Gigabyte GA-H97N-WIFI (rev. 1.0)

http://www.gigabyte.com/products/produc ... id=4992#sp

 

Thanks and sorry bad english

Link to post
Share on other sites

Hi,

could be useful full support to AMD AM1 platform cpu and motherboard.

 

ASROCK AM1H-ITX:

  • AMD Athlon 5350 CPU
  • AMD Radeon™ R3 Series Graphics
  • Realtek ALC892 Audio
  • Realtek RTL8111GR Gigabit LAN
  • ASMedia ASM1042A USB Controller
  • ASMedia ASM1061 SATA Controller

 

where i can find a list of supported device/controller?

Link to post
Share on other sites
Guest
This topic is now closed to further replies.