Jump to content
XPEnology Community

etheodor

Transition Member
  • Posts

    6
  • Joined

  • Last visited

etheodor's Achievements

Newbie

Newbie (1/7)

0

Reputation

  1. Please include drivers for HP DL380G5 Server (Network Adapters, and maybe RAID controllers if possible) Thank you very match for your work.
  2. Please include drivers for HP DL380G5 Server (Network Adapters, and maybe RAID controllers if possible) Thank you very match for your work.
  3. After reading what everyone here has experienced with the BIOS Reset problem. I have done some testing on my own, what I have noticed is you can solve the problem with the systems that do change the drive sequence when the BIOS resets by doing the following. 1. copy the DS3612xs_4.2-3211_x64_Microserver-20130612.img to a some size sata hard drive with HDDRawCopy1.02Portable.exe 2. set the correct mac address to the vender file 3. connect this hard drive to sata port 0 on your motherboard so even if the BIOS resets this drive will be the first drive so your system will boot normally ----------------------------------- Besides all this I have also verified but I am not sure if this is always true but, when I install this on a system with an Intel motherboard the BIOS problem does not exist.
  4. Hi everyone, If anybody can help me here please. Everything seems to be working ok on an HP Proliant ML 110 G6 and on an old IBM eServer xSeries 206, but almost every time I reboot or shutdown the system my BIOS gets reset to default settings. If anybody has experienced this please let me know if there is a solution to this problem because it changes the drive sequence and it cannot boot unless I change it back. Thank you
  5. Thanks for the quick reply. Can you provide me a link for the mod .pat file? Please Thank you
  6. Hi there, If anyone can help me out here please, I would be very grateful. I have a new HP N40L and I did the following: 1. Flashed the mod bios no problem here as per instructions on this forum 2. Copied nighthawk synoboot_microserver.img to my usb stick using this tool here http://hddguru.com/software/HDD-Raw-Copy-Tool/ 3. Changed the MAC address in "vender" file on a second partition to coincide with my stock MAC address 4. I loaded default setting on the Server Bios. 5. Booted using the usb stick above no problem here and then removed the usb stick 6. Connected to the server and tried to install 7. After setting password and so on, I use the .pat file that I have downloaded from the synology website here http://ukdl.synology.com/download/DiskStation/DSM4.2/3202/DSM_DS3612xs_3202.pat 8. The problem is that it skips formatting my Hard Drive and the it tries to install DSM and it fails with Server Error:Error=21 If anyone can help... please do so by pointing me to the right path. Thank
×
×
  • Create New...