valix Posted May 20, 2015 Share #576 Posted May 20, 2015 For building a kernel I found that page, but I'm not sure if it still works with DSM 5.x, cause the step-by-step is quiet old. And for installing kernel modules: http://hallard.me/how-to-install-kernel ... 0-dsm-4-1/ I haven't tried both yet. Honestly, I wait for Xpenboot 5.2 and will see how my hardware will work. I still can try to add kernel modules later Link to comment Share on other sites More sharing options...
Paranosh Posted May 23, 2015 Share #577 Posted May 23, 2015 Anybody knows if it's posible add support to Intel core 2 duo T2350: http://ark.intel.com/products/29751/Int ... 33-MHz-FSB The x64 images giveme the message about i686 cpu, and if i use the last x86 image (nanoboot 5.0.3.1) doesn't boot correctly because appears the excution error, due a sata problem. Thanks in advance. Link to comment Share on other sites More sharing options...
davidedag Posted May 26, 2015 Share #578 Posted May 26, 2015 Hi, Is it possible to add support for the Intel I218v nic? Got a MSI eco mboard (H97) with this nic... I had a search on the forum here but couldn't see any info.. Cheers! the card supported?? Link to comment Share on other sites More sharing options...
davidedag Posted May 26, 2015 Share #579 Posted May 26, 2015 Hi, Is it possible to add support for the Intel I218v nic? Got a MSI eco mboard (H97) with this nic... I had a search on the forum here but couldn't see any info.. Cheers! the card supported?? Link to comment Share on other sites More sharing options...
Paranosh Posted May 29, 2015 Share #580 Posted May 29, 2015 Anybody knows if it's posible add support to Intel core 2 duo T2350:http://ark.intel.com/products/29751/Int ... 33-MHz-FSB The x64 images giveme the message about i686 cpu, and if i use the last x86 image (nanoboot 5.0.3.1) doesn't boot correctly because appears the excution error, due a sata problem. Thanks in advance. Nobody knows if it's posible?¿ Link to comment Share on other sites More sharing options...
redsmall Posted June 2, 2015 Share #581 Posted June 2, 2015 Hi, Excuse me but i'm completely lost in differents versions of DSM and if i'have understand, it's only the trantor's version who can do works the 12 ports of my MB asrock C2550D4I. But where i can download it ? Thx Link to comment Share on other sites More sharing options...
redsmall Posted June 2, 2015 Share #582 Posted June 2, 2015 the link http://xpenology.trantor.be/beta/ is down :/ Link to comment Share on other sites More sharing options...
brantje Posted June 3, 2015 Share #583 Posted June 3, 2015 Would it be possible to add a driver for the ASRock Z97E-ITX board? LAN / Storage doesn't seem to be working. Chipset: Intel® Z97 (DL Link: http://www.asrock.com/mb/Intel/Z97E-ITX ... oad&os=All) A donation awaits ;p Link to comment Share on other sites More sharing options...
waeb Posted June 10, 2015 Share #584 Posted June 10, 2015 Hi, Can drivers be added for the intel l128-v network interface card? using a intel nuc(D34010WYKH) that has this nic only recieving: eth0 not running error. Saw some others requesting it, so here is also my request . intel driver download link : https://downloadcenter.intel.com/download/23378/D54250WY-D34010WY-driver-bundle kind regards, waeb Link to comment Share on other sites More sharing options...
Thecapri Posted June 11, 2015 Share #585 Posted June 11, 2015 need help for this HighPoint Technologies Inc. RocketRaid 620 http://highpoint-tech.com/USA_new/serie ... wnload.htm thank you Link to comment Share on other sites More sharing options...
flydr4g0n Posted June 13, 2015 Share #586 Posted June 13, 2015 Support for Ralink RT2500F PCI chipset is possible ? In 03-wifi.conf of xpenoboot i find it`s supported but nothing shows up in DSM thanks Link to comment Share on other sites More sharing options...
grequ22 Posted June 16, 2015 Share #587 Posted June 16, 2015 Hi, Any way to support Nec USB 3.0 Driver - to be precisely Sunrich Technology U-550 with Renesas uPD720200, OEM Fujitsu s26361-d2971-a10 Xpenology is not recognizing it at all, not even USB 2.0 http://plugable.com/drivers/renesas Linux Driver code is in drivers/usb/host/xhci*. Kernel driver code was first provided in kernel 2.6.31. Kernel driver stable in kernel 3.0 and later drivers in windows system working very well Link to comment Share on other sites More sharing options...
richv31 Posted June 17, 2015 Share #588 Posted June 17, 2015 Hey guys, in the latest 5.2-5565.2 the Realtek drivers do not work for WOL. They work fine in 5.1-5055.1. Can you please include the ones from 5055.1 somehow? I am using rmmod=r8169 insmod=r8168. Many thanks V Link to comment Share on other sites More sharing options...
simba Posted June 25, 2015 Share #589 Posted June 25, 2015 Hi is it possible to make this dvb/t device work Mygica t230 here is the firm, work with Kernell 3.19 http://www.linuxtv.org/wiki/index.php/Geniatech_T230 regards Link to comment Share on other sites More sharing options...
simba Posted June 25, 2015 Share #590 Posted June 25, 2015 I forgot to say i have a xpenology DS3615xs intel cpu Link to comment Share on other sites More sharing options...
e01 Posted June 26, 2015 Share #591 Posted June 26, 2015 (edited) Hi guys, Any chance to get TP-LINK Archer T9E WIFI PCI-E card in next release? https://wikidevi.com/wiki/TP-LINK_Archer_T9E http://www.tp-link.com/en/products/deta ... r-T9E.html Edited June 28, 2015 by Guest Link to comment Share on other sites More sharing options...
snoopy78 Posted June 27, 2015 Share #592 Posted June 27, 2015 is it possible to add mpt3sas in new release? otherwise, could you advice me, how to add/compile it by myself? i'm using an LSI 9300-16i 12G SAS HBA && LSI 9201-8i SAS HBA .....DMESG only shows this... " dmesg | grep LSI [ 1.339441] mpt2sas0: LSISAS2008: FWVersion(19.00.00.00), ChipRevision(0x03), BiosVersion(07.29.00.00) [ 20.185732] Copyright © 1999-2008 LSI Corporation [ 20.287537] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. " BR Link to comment Share on other sites More sharing options...
EvgeniX Posted June 28, 2015 Share #593 Posted June 28, 2015 Please add Broadcom BCM94360CD for WiFi and BT here is more info and linux drivers - https://wikidevi.com/wiki/Broadcom_BCM94360CD and/or here - http://www.broadcom.com/support/?gid=1 Thanks Link to comment Share on other sites More sharing options...
rok1 Posted July 7, 2015 Share #594 Posted July 7, 2015 I've searched the forums and have not been able to see if the HighPoint RocketRaid 27x0 series is supported yet. They all use the Marvell 9485 SAS/SATA 6Gb/s chip. Typically on Linux I've had to build a driver for it, but wondering if it can be added to future versions of XPEnoboot. I personally don't need it yet, but once I outgrow the 4 onboard sata ports of my Dell PowerEdge T20 that is my planned card. http://www.highpoint-tech.com/USA_new/s ... ration.htm Link to comment Share on other sites More sharing options...
hussain Posted July 8, 2015 Share #595 Posted July 8, 2015 hi i'm looking for a driver for this pci wifi card: http://www.smc.com/en-global/products/product/100/0 it's a rt2800pci as debian suggested, linux drivers are available here: https://wiki.debian.org/rt2800pci preferably with AP mode thanks a million Link to comment Share on other sites More sharing options...
rok1 Posted July 9, 2015 Share #596 Posted July 9, 2015 I've searched the forums and have not been able to see if the HighPoint RocketRaid 27x0 series is supported yet. They all use the Marvell 9485 SAS/SATA 6Gb/s chip. Typically on Linux I've had to build a driver for it, but wondering if it can be added to future versions of XPEnoboot. I personally don't need it yet, but once I outgrow the 4 onboard sata ports of my Dell PowerEdge T20 that is my planned card. http://www.highpoint-tech.com/USA_new/s ... ration.htm I just want to say that there is a driver in the current XPEnoboot called mvsas which does seem to work ok with this card. Normally we want a rr27x0_XX.ko driver as the mvsas has had trouble with losing communication with drives in the past. I am uncertain if this problem still exists. Link to comment Share on other sites More sharing options...
M230 Posted July 9, 2015 Share #597 Posted July 9, 2015 I just got the Edimax EW-7711UAn USB Wi-Fi dongle which is in Synology's supported dongle list. However, it isn't recognized whatsoever by my xpenology. Is this a driver issue? Edit: This is the linux driver provided by Edimax: https://mega.co.nz/#!IxYAFAoD!kVHbNKeQ6 ... gYjq7hLA94 Link to comment Share on other sites More sharing options...
cayou2000 Posted July 9, 2015 Share #598 Posted July 9, 2015 I just get a Broadcom NetXtreme II BCM5709 4*1 gbps PCI express 4x with the last version of DSM5.1 I set up a LAG with the 4+1 LAN and it perfectly work. Link to comment Share on other sites More sharing options...
tooviral Posted August 11, 2015 Share #599 Posted August 11, 2015 Can drivers be added for Intel® 10 Gigabit AT Server Adapter. Trying to use two of these between two comp Driver Link Thanks Link to comment Share on other sites More sharing options...
semo Posted August 12, 2015 Share #600 Posted August 12, 2015 Could I request that the existing ALX driver for Atheros (HP N54L) driver is patched to allow for WOL to work? The driver was patched by Frédéric COIFFIER and more info can be found here https://bugzilla.kernel.org/show_bug.cgi?id=61651 Link to comment Share on other sites More sharing options...
Recommended Posts