Realmagnum Posted December 11, 2016 Share #126 Posted December 11, 2016 ..... And after the kernel is booting nothing appens and i have my cpu disabled ..... I try with virtualbox Nothing appens i don't understand why can't use with vm It is simple. Stop VM. Unregister It. Download .vmx of VM. Edit it in Notepad and change: numvcpus = "1" cpuid.coresPerSocket = "1" memSize = "1024" Save and upload at the same place. In datastore register VM again. Start and be happy. Later you can correct this options as you want by edit VM settings. PS. Sorry, my English also very pre-intermediate. ) Link to comment Share on other sites More sharing options...
kaku Posted December 11, 2016 Share #127 Posted December 11, 2016 Any possibility of adding NIC drivers for RTL8168EL . Ubuntu uses 8169 drivers, but both on ubuntu and XPEnology, NIC looses connection after few minutes and is unpingable after that . MB is Gigabyte B75m-D3H Link to comment Share on other sites More sharing options...
ronin Posted December 11, 2016 Share #128 Posted December 11, 2016 Thanks for all your efforts. So, if I have DSM6 installed with Juns bootloader and I want to change to yours and edit manually grub (for a n54l, AMD), would I need to "set default='4'"?. any luck on this? Link to comment Share on other sites More sharing options...
quicknick Posted December 11, 2016 Author Share #129 Posted December 11, 2016 Roadmap v2.3 - should be out today, 12/11 Sorry for the trouble you all been having. The initial release uncovered a few issues I missed. Reduce ESXi CPU/MEM to 1/1024MB Add more drivers minor updates to XPEnology Configuration Tool Grub changes fix ESXi installs Link to comment Share on other sites More sharing options...
quicknick Posted December 11, 2016 Author Share #130 Posted December 11, 2016 Thanks for all your efforts. So, if I have DSM6 installed with Juns bootloader and I want to change to yours and edit manually grub (for a n54l, AMD), would I need to "set default='4'"?. any luck on this? Yes set default ='4' Link to comment Share on other sites More sharing options...
ronin Posted December 11, 2016 Share #131 Posted December 11, 2016 Thanks for all your efforts. So, if I have DSM6 installed with Juns bootloader and I want to change to yours and edit manually grub (for a n54l, AMD), would I need to "set default='4'"?. any luck on this? Yes set default ='4' Thanks for letting us know! Link to comment Share on other sites More sharing options...
boboker Posted December 11, 2016 Share #132 Posted December 11, 2016 Thanks for that but it change nothing i have the same error "cpu is disabled by quest and my DEL of CAPS Locks blink fast I can"t connect to ssh and i don't find my IP when i do a network scan with Vmware workstation 12 Have you solution ? Link to comment Share on other sites More sharing options...
morbloe Posted December 11, 2016 Share #133 Posted December 11, 2016 Hi! I'm a bit lost I'm using Workstation 12.5.2 on Win10Prox64. The provided ovf in OP does not work. The VM crashes every time. Well, thnx quicknicknow it's easy working virtual bootloader for WorkStation https://drive.google.com/open?id=0B0iu0 ... WlnWEZsRmc This one worked a bit better. I was able to build a vm with it and boot up. BUT: I get the error, that the installation fails because of corrupted file (error 13). I also tried manually with the PAT-File from synology (MD5 matched), but no luck. So last hope was: https://drive.google.com/open?id=0B0iu05aCEtuxZ3lMb19uM1l2VEk But I can't import it due to incompatible hardware-options in the OVA-File. Any help much appreciated!! I think A.S._id should tell quicknick what he did. His vmdk has no cpu disabled. But his vmdk corrupts the pat file.... See above Link to comment Share on other sites More sharing options...
dadark Posted December 11, 2016 Share #134 Posted December 11, 2016 I tried the vmdk file now on 3 different Virtualbox host and 2 Routers. But on all the bridged networking is not working. Sometimes the VM get a IP but i can't ping this ip and from the vm i can't ping anything on the network. Only NAT is working. When i forward Port 5000 then i can start the installation but it break with corrupt .pat file. even when i set the bootdrive to non persistent. Maybe because the drive get formatted too till restart or the quicksetup is not working. If someone need the root password for today: c12-0b01 When i start 1.quicksetup via serial then i see this screen: This Quick Configuration Guide will help you set MAC Address, Serial Number and vid/pid of your USB on the grub config These options are necessary to install Synology DSM successfully. Would you like to continue? [y/n]: Please enter y or n! Press [Enter] key to continue...y <-- first possible input Is this correct? I think i have to put the y one line up because the message say only press enter. Link to comment Share on other sites More sharing options...
deejaysyky Posted December 11, 2016 Share #135 Posted December 11, 2016 Hi gave would add drivers for network Mikrotik RB44GE chip Atheros AR8131 / M thank you Link to comment Share on other sites More sharing options...
Guest Posted December 11, 2016 Share #136 Posted December 11, 2016 Hello quicknick, it would be really great if you can implement some drivers for: Realtek RTL 8139 With this it would be possibile to get DSM 6.0.2 working under XenServer 7. At the moment the last working version of XPE is 5.0 Many thanks. Bye gmop Link to comment Share on other sites More sharing options...
boboker Posted December 11, 2016 Share #137 Posted December 11, 2016 I have great news for everyone ! Today is my birthday I try to investigate why we can't install DSM on VDMK file and finally i change the Sata Port Mapping from 422 to 4 and it's OK DSM is formatting the disk and it works for me If you need VDMK file with modification i can upload this if you ask Thanks and have a good day Link to comment Share on other sites More sharing options...
boboker Posted December 11, 2016 Share #138 Posted December 11, 2016 I have great news for everyone ! Today is my birthdayI try to investigate why we can't install DSM on VDMK file and finally i change the Sata Port Mapping from 422 to 4 and it's OK DSM is formatting the disk and it works for me If you need VDMK file with modification i can upload this if you ask Thanks and have a good day Bad news i have error 13 when i try to install the DSM Link to comment Share on other sites More sharing options...
mats42 Posted December 11, 2016 Share #139 Posted December 11, 2016 Hello quicknick, it would be really great if you can implement some drivers for: Realtek RTL 8139 With this it would be possibile to get DSM 6.0.2 working under XenServer 7. At the moment the last working version of XPE is 5.0 Many thanks. Bye gmop I don't do Xen myself but I found this for you https://www.netservers.co.uk/articles/o ... 00_gigabit Link to comment Share on other sites More sharing options...
Guest Posted December 11, 2016 Share #140 Posted December 11, 2016 Thanks for the link. The article describes the doing to set an Intel e1000 Nic. But with XenServer 7 this dosn´t work anymore. There is another article for doing this with XenServer 7: https://blogs.serioustek.net/post/2016/ ... enserver-7 But the problem here is, that this seems not to work with HVM guest´s. I´ve checked out every possible workarround (PCI passtrough of the NIC did also not work) but in the end the only working solution for XenServer 7 and DSM 6 is to implement the RTL 8139 drivers Bye gmop Link to comment Share on other sites More sharing options...
filippo333 Posted December 11, 2016 Share #141 Posted December 11, 2016 This happens every single time I go to create a BTRFS volume. Pool is entirely initialised :'( It never happened with Jun's 1.01 loader! Link to comment Share on other sites More sharing options...
Elpee Posted December 11, 2016 Share #142 Posted December 11, 2016 Be patient, guys. If you are now running on Jun's loader and it's stable, just keep it. I'm waiting for quicknick next version (v2.3). I right now cannot set up MAC/ SN/ VID/PID/... BEFORE I install DMS. Many thanks for your efforts, quicknick. Link to comment Share on other sites More sharing options...
-iliya- Posted December 11, 2016 Share #143 Posted December 11, 2016 quicknick Please add driver for HighPoint RocketRAID 2680 and Adaptec ARC 5xxx 6xxx series Link to comment Share on other sites More sharing options...
A.S._id Posted December 11, 2016 Share #144 Posted December 11, 2016 I think A.S._id should tell quicknick what he did. His vmdk has no cpu disabled. But his vmdk corrupts the pat file.... See above This is a allready vmachine without any HDD only butloader, You can add some HDD (SCSI Recomended) and download DSM 6.0.2 8451 vDiskStation_XPEnology-DSM-6.0.2-8451.5-quicknick-boot-v2.2 Link to comment Share on other sites More sharing options...
AlienX Posted December 11, 2016 Share #145 Posted December 11, 2016 Hi, Firstly thanks for your efforts to everyone involved to get us to a better version of Synology DSM. However, I have failed to successfully install this onto VMWare ESXi 6.5 (using Hardware Version 10). It always errors with the usual "Unable to install, the install file might be corroupt (13)" error. I have checked the MD5 Sum of the package against what Synology have and the package is okay. Unsure what to do now. Can provide messages log if needed Link to comment Share on other sites More sharing options...
Realmagnum Posted December 11, 2016 Share #146 Posted December 11, 2016 ...Corrupt...error 13...Unsure what to do now. Read ROADMAP and wait for 2.3 version. And read all 15 pages(you need max 15 min for it), it's useful for understanding. Link to comment Share on other sites More sharing options...
koroziv Posted December 11, 2016 Share #147 Posted December 11, 2016 (edited) Hi,Firstly thanks for your efforts to everyone involved to get us to a better version of Synology DSM. However, I have failed to successfully install this onto VMWare ESXi 6.5 (using Hardware Version 10). It always errors with the usual "Unable to install, the install file might be corroupt (13)" error. I have checked the MD5 Sum of the package against what Synology have and the package is okay. Unsure what to do now. Can provide messages log if needed Here is what I used on esxi 6.5, on a hp gen8 microserver : https://mega.nz/#!Vk40FCDT!r2ertz7Eyoeh ... W2p1GLgzfs It's jun's loader 1.01. Add drive and install. If you want to modify the grub cfg you need to set the boot drive as dependent or persistent before edit. But I see no need for abusing synology services, a free dns is all you need. The vm comes with 2x2 cpu and 4 GB ram, change it to your needs. edit: here is how you can edit grub after dsm6 install (make sure the boot drive is NOT non-persistent for this to work): SSH into dsm and type echo 1 > /proc/sys/kernel/syno_install_flag mount /dev/synoboot1 /mnt /mnt/grub/grub.cfg umount /mnt or for using winscp to edit the file with notepad++ (vi editor is not that hard, but...): 1. Login using putty or any other ssh client with administrator account (usually "admin") 2. You will be asked for a password. Enter the one for the administrator account 3. You will get a command prompt 4. Enter: sudo su - 5. You will be asked for a password. Enter again the one for the administrator account 6. You will get a command prompt root@... 7. Enter command: synouser --setpw root your_new_root_password For "your_new_root_password" please use the desired password for root account. Nou you can do SSH into dsm and type echo 1 > /proc/sys/kernel/syno_install_flag mount /dev/synoboot1 /mnt login using winscp (user root and the password you set before) an go to /mnt/grub/ and edit grub.cfg Save and close editor when finished. Get back to the ssh sesion and do umount /mnt Shut down dsm normally (not from esxi cli or webui) and edit the vm setting - change the boot drive back to non-persistent. Edited December 11, 2016 by Guest Link to comment Share on other sites More sharing options...
spatzi1506 Posted December 11, 2016 Share #148 Posted December 11, 2016 Hi everybody, DSM 6.0 works fine on my HP54NL but one thing still missing: USB 1.1 Support for my UPS. Is it coming in the near Future? Thanks Peter P.S. GREAT WORK!!! Link to comment Share on other sites More sharing options...
satdream Posted December 11, 2016 Share #149 Posted December 11, 2016 Great job ! thanks a lot Unfortunatly the Marvell 88SE94xx listed as working is not fully supported ... impossible to install DSM on e-Sata disks (x2 HDD connected via single e-Sata connector in FIS mode) ... Right now, no way than FreeNAS to support standard FIS e-Sata external disks Is it something special to configure more than to map the e-Sata Marvell Card in Esxi ? Thanks Link to comment Share on other sites More sharing options...
ronin Posted December 11, 2016 Share #150 Posted December 11, 2016 Wow! this is a major leap in development. Thanks a lot all!. I will report back when all is working on HP Gen7 N54L AMD. Currently on jun's. Keep up the great work! fyi I cannot get it to work with v2.2. I will await v2.3. Link to comment Share on other sites More sharing options...
Recommended Posts