aoprea Posted February 7, 2023 Share #1826 Posted February 7, 2023 Hi, i have a HP Microserver Gen 8 with 1610T processor and DS3622xs (ARPL 1.b.13). all working good. Yesterday i change CPU to E3-1265L V2 but DSM not have network after arpl booting and start load boot At begining it take IP but after start loading dsm kernel and booting it loose IP I cant find dsm machine with synology assistant I change back cpu to 1610T and all is good ... dsm booting and have IP and start good. So what is wrong with E3-1265L V2 ??? Have some conflict with arpl kernel ? What can be wrong ? I will try to make a new clean usb stick with fresh loader with E3-1265L V2 on gen8. Maybe is something on loader when is build with another cpu. Quote Link to comment Share on other sites More sharing options...
AleAmadoC Posted February 7, 2023 Share #1827 Posted February 7, 2023 On 2/3/2023 at 2:51 PM, AleAmadoC said: Hello, When I try to Install Any Model With DSM 42218 (This because is the last version where advanced media codecs can activate) I get Hash mismatch error, no matter what hardware I use, only let me install beyond that like 42962. Thank you for your help. Well I think the file downloaded doesnt match with the file expected, thats the same for arpl or for tinycore, at the end i found a working usb with dva 3221 7.0.1 and made and image and save it for future use, as for virtual found also a working vm with same specs and cloned it, I think there will be no more support for 7.0.1 going forward. Quote Link to comment Share on other sites More sharing options...
aoprea Posted February 7, 2023 Share #1828 Posted February 7, 2023 7 hours ago, aoprea said: Hi, i have a HP Microserver Gen 8 with 1610T processor and DS3622xs (ARPL 1.b.13). all working good. Yesterday i change CPU to E3-1265L V2 but DSM not have network after arpl booting and start load boot At begining it take IP but after start loading dsm kernel and booting it loose IP I cant find dsm machine with synology assistant I change back cpu to 1610T and all is good ... dsm booting and have IP and start good. So what is wrong with E3-1265L V2 ??? Have some conflict with arpl kernel ? What can be wrong ? I will try to make a new clean usb stick with fresh loader with E3-1265L V2 on gen8. Maybe is something on loader when is build with another cpu. I made a clean usb stick with arpl 1.11a and ds3622xs with E3-1265L V2 ... but is the same ... it take ip at begening but after dms kernel loading it loose IP and not respond to ping .... Please help me ... thanks Quote Link to comment Share on other sites More sharing options...
aoprea Posted February 7, 2023 Share #1829 Posted February 7, 2023 I switch to TCRP loader and all good .... so i think is something bug in arpl loader if not work network..... Quote Link to comment Share on other sites More sharing options...
Derex Posted February 7, 2023 Share #1830 Posted February 7, 2023 I made a clean usb stick with arpl 1.11a and ds3622xs with E3-1265L V2 ... but is the same ... it take ip at begening but after dms kernel loading it loose IP and not respond to ping .... Please help me ... thanks Happened the same on my microserver gen10. I had intalled proxmox and installed xpenology on it as a vm. It is working perfectly. I had followed this turorial: https://hotstuff.asia/2023/01/11/xpenology-with-arpl-on-proxmox-the-pro-way/Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
cpresco Posted February 7, 2023 Share #1831 Posted February 7, 2023 11 hours ago, oswaldini said: Hi, I want to buy H370M-ITX/ac. This motherboard has two network cards: Intel I219V and I211AT - will both NICs work? The information I found are not unequivocal. I have an Asrock H370M-ITX/ac and was considering migrating from the Jetway NF9J-Q87 I'm currently using. I last tested with ARPL 1.09 using a spare USB stick and spare hard drives and recall seeing that both the i219v and i211at were available in DSM. The WiFi NIC was not available (I believe that is to be expected). The reason I have not migrated to the Asrock H370M-ITX/ac is because the Asrock H370M-ITX/ac doesn't have onboard serial ports(which in my opinion are essential for troubleshooting) but I was able to add a serial port via a PCIe card in the single available PCIe slot on the Asrock H370M-ITX/ac. I have since decided on migrating to an Asrock IMB-1211-D which has onboard serial ports which leaves the PCIe slot available for a future upgrade like a 2.5Gb NIC. Additionally I'd also highly recommend using a Lantronix Spider KVM with motherboards that don't have out-of-band management port(HP iLO or Dell iDrac are examples). The Lantronix Spider KVM also provides a serial connection that is accessible via SSH. 1 Quote Link to comment Share on other sites More sharing options...
vbap Posted February 7, 2023 Share #1832 Posted February 7, 2023 4 hours ago, aoprea said: Please help me ... thanks For the HP Microserver, I think you need to select "all modules" when building. Quote Link to comment Share on other sites More sharing options...
frezeen Posted February 8, 2023 Share #1833 Posted February 8, 2023 @fbelavenuto is possible to add a qemu-agent-guest module for proxmox? Quote Link to comment Share on other sites More sharing options...
aoprea Posted February 8, 2023 Share #1834 Posted February 8, 2023 6 hours ago, vbap said: For the HP Microserver, I think you need to select "all modules" when building. I try that .. no succes .. still not have network after dsm kernel load Quote Link to comment Share on other sites More sharing options...
aportnov Posted February 8, 2023 Share #1835 Posted February 8, 2023 Hello everyone. Please help me, I'm trying to make an nvme ssd cache, the system doesn't see it, what's wrong? Model DVA3219. Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted February 9, 2023 Author Share #1836 Posted February 9, 2023 On 2/1/2023 at 2:46 AM, ACiDxCHRiST said: @fbelavenuto I have a system that last worked on 1.0 beta 5. With every version of ARPL since then, the computer freezes while booting DSM kernel and is not reachable. I have been doing various steps to try and isolate the issue. If I clean image beta 5 to my USB drive then update the menu to beta 13 and build the loader, everything works. But if I then update the Addons and build the loader, DSM never boots. I tried disabling the ACPID and MISC addons alternately, but that didn't help. Is there something that you changed between beta 5 and beta 6 that would be touched by triggering an addons update? Please let me know any diagnostics that would help you dial down what is causing the problem. Prod LKM Direct Boot Ryzen 3600 ASUS ROG STRIX X370-F GAMING The main change is eudev addon! With latest addons, add the console addon and check if a console show up in your screen after boot. 1 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted February 9, 2023 Author Share #1837 Posted February 9, 2023 On 2/3/2023 at 5:51 PM, AleAmadoC said: Hello, When I try to Install Any Model With DSM 42218 (This because is the last version where advanced media codecs can activate) I get Hash mismatch error, no matter what hardware I use, only let me install beyond that like 42962. Thank you for your help. Synology changed the files for 42218 release. Now this release have update6 embedded. Try with this image: https://github.com/fbelavenuto/arpl/actions/runs/4129912020 PS: Try with 42962 release and add "codecpatch" addon. 1 1 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted February 9, 2023 Author Share #1838 Posted February 9, 2023 On 2/4/2023 at 5:08 AM, nemesis122 said: TEST ARPL 1.0 beta 13 System HP gen8 Micorserver CPU i3 3240 16GB RAM 4x4tb HDD + 1xSSD 1xNetwork card Intel 520SFP+ Dual ARPL 1.0 beta 13 all modules+Addons updated these Modules are also not working when the modules + addons NOT updated Selected Addons : CPU Info + syno Codec Patch Selected Modules: ALL ( these Models which is not working is also not working when Moddules are not Selected DSM Version 42962 tested 920+ no HDD Detected 1621xs no HDD Detected 2422xs no HDD Detected 3615xs not working crash Soft Lookup [ 197.214775] Modules linked in: bromolow_synobios(PO) usbcore usb_common redpill(OF) 3617xs not working the same problem as 3615xs 3622xs working perfect in any case updated fresh install etc. DVA1622 no HDD Detected RS4021 working perfect in any case updated fresh install etc. pls note with ARPL 1.0 beta 11 these models 3617 3622 4021 was working perfect in any case other i have not tested there was only a cosmetic issue in the Info tab CPU clock speed I believe this server uses a HBA card. DSM Devicetree models do not works with HBA card, only native SATA controllers. Try change LKM version (advanced menu) from DEV to PROD. 1 1 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted February 9, 2023 Author Share #1839 Posted February 9, 2023 On 2/5/2023 at 3:36 PM, Marello320 said: Hello everyone, such an interesting question, I'm putting the latest version of rpl v1.0-beta 13, I tried to do everything for a test with 1 disk, in the end everything was put, everything is OK. But as soon as I connect everything else, 5 disks and 1 ssd, then when building the build and rebooting, I see how the ping goes 1 time, and then silence, I waited for more than 10 minutes, but even the nas did not appear on the network. Who can tell you what the problem is? Please change LKM version from DEV to PROD (advanced menu), rebuild and test 1 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted February 9, 2023 Author Share #1840 Posted February 9, 2023 On 2/5/2023 at 10:08 PM, tigs said: Hello Guys and hopefully @fbelavenuto I have been playing with both this automated or the other non-automated to setup DVA3221 on lenovo P300 thinkstation with xeon E3-1245 v3 CPU and Intel I217LM onboard NIC. arpl-1.0-beta13 AND tinycore-redpill.v0.9.4.0 The process is fairly simple and straightforward. Everything went well until the last step when I "Boot the Loader". It booted up to USB with verbose. It is very short lived, for less than a minute. It would shut down automatically. There were occasions i was quick enough to connect from within the Synology assistant. the web page was loading and stuck at http://xxx.xxx.xx.xx:5000/timestamps ?, then computer would shut down. I have been playing with for the past 3 days with no progress. auto serial N auto Mac PID and VID are correct Thanks Check if "misc" addon is selected. 2 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted February 9, 2023 Author Share #1841 Posted February 9, 2023 On 2/7/2023 at 7:17 AM, aoprea said: Hi, i have a HP Microserver Gen 8 with 1610T processor and DS3622xs (ARPL 1.b.13). all working good. Yesterday i change CPU to E3-1265L V2 but DSM not have network after arpl booting and start load boot At begining it take IP but after start loading dsm kernel and booting it loose IP I cant find dsm machine with synology assistant I change back cpu to 1610T and all is good ... dsm booting and have IP and start good. So what is wrong with E3-1265L V2 ??? Have some conflict with arpl kernel ? What can be wrong ? I will try to make a new clean usb stick with fresh loader with E3-1265L V2 on gen8. Maybe is something on loader when is build with another cpu. Try change LKM version from DEV to PROD (advanced menu), build and test it. 1 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted February 9, 2023 Author Share #1842 Posted February 9, 2023 On 2/7/2023 at 9:32 AM, AleAmadoC said: Well I think the file downloaded doesnt match with the file expected, thats the same for arpl or for tinycore, at the end i found a working usb with dva 3221 7.0.1 and made and image and save it for future use, as for virtual found also a working vm with same specs and cloned it, I think there will be no more support for 7.0.1 going forward. Please look at this answer: 1 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted February 9, 2023 Author Share #1843 Posted February 9, 2023 On 2/7/2023 at 2:32 PM, aoprea said: I made a clean usb stick with arpl 1.11a and ds3622xs with E3-1265L V2 ... but is the same ... it take ip at begening but after dms kernel loading it loose IP and not respond to ping .... Please help me ... thanks Try to change direct boot to YES (advanced menu) 1 Quote Link to comment Share on other sites More sharing options...
AlexSoft_58 Posted February 9, 2023 Share #1844 Posted February 9, 2023 7 часов назад, aportnov сказал: Всем привет. Помогите пожалуйста, пытаюсь сделать nvme ssd кэш, система его не видит, что не так? Модель DVA3219. Edit the file: synoinfo.conf Add there: supportnvme="yes" and reboot, everything should work. 1 Quote Link to comment Share on other sites More sharing options...
Marello320 Posted February 9, 2023 Share #1845 Posted February 9, 2023 5 часов назад, fbelavenuto сказал: Измените версию LKM с DEV на PROD (расширенное меню), перестройте и протестируйте. I tried this option, but it was also unsuccessful Quote Link to comment Share on other sites More sharing options...
DHChoi Posted February 9, 2023 Share #1846 Posted February 9, 2023 On 2/8/2023 at 1:50 PM, aoprea said: I try that .. no succes .. still not have network after dsm kernel load I have a same symptoms. I think v1.0-beta3 (or less) only works well. and you can update latest version from v1.0-beta3. But do not update module and LVM in update menu and you have to update ARPL only. 1 Quote Link to comment Share on other sites More sharing options...
aportnov Posted February 9, 2023 Share #1847 Posted February 9, 2023 1 час назад, AlexSoft_58 сказал: Edit the file: synoinfo.conf Add there: supportnvme="yes" and reboot, everything should work. This parameter has already been added to /etc/synoinfo.conf, but it was not in /etc.defaults/synoinfo.conf, and I added it, it helped, thank you very much! 2 Quote Link to comment Share on other sites More sharing options...
SpiderPOH Posted February 9, 2023 Share #1848 Posted February 9, 2023 (edited) Hi, i have running a old Xpenology DSM 6.4 running as 918+ with AMD 1700X , 16GB Ram , 2xNvMe 1TB Samsung PRO (Cache Drives) , 4x4TB HDD, and a Aquantia 10GB NetworkCard Now i will upgrade this Server and use the new ARPL 1.1-beta1 but here the 918+ have no Aquantia Modules , so i change to the DS3617xs, but after the ARPL Loader was loadet and show me the IP-Address the DSM will not comming up. UPDATE: I will Downgrade the ARPL Version to 1.0-beta13 but the same System will Boot i see the IP Adress Loading DSM kernel.... Booting.... Crash.... No Ping to the DSM and the Server was freeze What can i do ? Greetz Edited February 9, 2023 by SpiderPOH Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted February 9, 2023 Share #1849 Posted February 9, 2023 (edited) 2 hours ago, DHChoi said: I have a same symptoms. I think v1.0-beta3 (or less) only works well. and you can update latest version from v1.0-beta3. But do not update module and LVM in update menu and you have to update ARPL only. Yes i can confirm this is the best Loader so far working in any states do not forget to add the CPU Governor Command for full performance in the task scheduler Quote modprobe acpi-cpufreq && echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor and add with this the correct CPU Information and voila all is working perfect Edited February 9, 2023 by nemesis122 Quote Link to comment Share on other sites More sharing options...
oswaldini Posted February 9, 2023 Share #1850 Posted February 9, 2023 On 2/7/2023 at 9:15 PM, cpresco said: I have an Asrock H370M-ITX/ac and was considering migrating from the Jetway NF9J-Q87 I'm currently using. I last tested with ARPL 1.09 using a spare USB stick and spare hard drives and recall seeing that both the i219v and i211at were available in DSM. The WiFi NIC was not available (I believe that is to be expected). The reason I have not migrated to the Asrock H370M-ITX/ac is because the Asrock H370M-ITX/ac doesn't have onboard serial ports(which in my opinion are essential for troubleshooting) but I was able to add a serial port via a PCIe card in the single available PCIe slot on the Asrock H370M-ITX/ac. I have since decided on migrating to an Asrock IMB-1211-D which has onboard serial ports which leaves the PCIe slot available for a future upgrade like a 2.5Gb NIC. Additionally I'd also highly recommend using a Lantronix Spider KVM with motherboards that don't have out-of-band management port(HP iLO or Dell iDrac are examples). The Lantronix Spider KVM also provides a serial connection that is accessible via SSH. I bought used H370M-ITX, i5-8400 and 16GB RAM for €158 ($170). I hunted for this motherboard because it has 2x LAN and 6x SATA. I'm getting rid of my Dell 7010 with a Dell Perc H310. I'm on a tight budget so I'll probably order 3x WD Red Plus 4TB drives, the old two WD Red 2TB will be left for non-essential data. You can use the usb serial port to leave the PCIe slot empty. Here I found drivers for DSM: https://github.com/robertklep/dsm7-usb-serial-drivers For my needs I don't need additional 2.5Gb or 10Gb NIC, it will aggregate 2x1Gb NIC. I'll probably add a serial port soon. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.