aoprea

I try that .. no succes .. still not have network after dsm kernel load

Not even a clean usb loader work... i try all combination ... but network not work I switch to TCRP loader and all good .... so i think is something bug in arpl loader.....

I switch to TCRP loader and all good .... so i think is something bug in arpl loader if not work network.....

I made a clean usb stick with arpl 1.11a and ds3622xs with E3-1265L V2 ... but is the same ... it take ip at begening but after dms kernel loading it loose IP and not respond to ping .... Please help me ... thanks

Hi, i have a HP Microserver Gen 8 with 1610T processor and DS3622xs (ARPL 1.b.13). all working good. Yesterday i change CPU to E3-1265L V2 but DSM not have network after arpl booting and start load boot At begining it take IP but after start loading dsm kernel and booting it loose IP I cant find dsm machine with synology assistant I change back cpu to 1610T and all is good ... dsm booting and have IP and start good. So what is wrong with E3-1265L V2 ??? Have some conflict with arpl kernel ? What can be wrong ? I will try to make a new clean usb stick with fresh loader with E3-1265L V2 on gen8. Maybe is something on loader when is build with another cpu.

You have this cpu when you build the loader? I will try to make a new clean usb stick with fresh loader with E3-1265L V2 on gen8. Maybe is something on loader when is build with another cpu.

I change back cpu to 1610T and all is good ... dsm booting and have IP and start good. So what is wrong with E3-1265L V2 ??? Have some conflict with arpl kernel ?

Hi Today after change CPU on my HP gen8 from 1610T to E3-1265L V2 DSM with ARPL (V1. beta13) not have network after arpl booting and start load boot At begining it take IP but after start loading dsm kernel and booting it loose IP I cant find dsm machine with synology assistant What can be wrong ?

Me too i have migrate 4 x 4Tb hdd from a xpeno ds920+ to a baremetal HP Microserver gen8 using latest ARPL all migration proces is done and perfect Question is it's good or bad to change filesistem volume to BTRFS (now its ext4) I weill use HPMgen8 at home for general ussage: - store many family photos - photo station - store movies Its deserve to delete ext4 volume and make new one btrfs ?

I have asrock j5005-itx and by default have 4 sata slots.. I have 4 disk instaled in raid 5 and it's work very well with last 6.2.3 firmware. Sent from my GM1913 using Tapatalk

Why install this 6 years old version. Go with 1.04 loader and last 6.2.3 version.

For a home use of xpenology and a low power consumption i recomend asrock j5005 itx mainboard. Sent from my GM1913 using Tapatalk

Hi as you know, on synology not exist a good method to do a simple backup (mirroring, rsync) to a external USB: - usbcopy permit only one job -hyper backup it's to complicated to do a simple job (directory of bkp is inside another directory, or if you allready have bkp directory you have to re-doit job again from begining) So, i made a simple script in job task scheduler to do a backup of internal directory to a external usb and to have a notification when job is done: #!/bin/bash rsync -au --delete /volume1/dir/ /volumeUSB2/usbshare/dir-bkp/ /usr/syno/bin/synodsmnotify @administrators "Rsync Task" "Dir-bkp done !!!" change dir with your directory I hope it's help.

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 6 - Loader version and model: Jun's Loader v1.04 - Using custom extra.lzma: Yes IG88 for 6.2.3 - Installation type: BAREMETAL J5005 Additional comments: How to update: - From 6.2.2-24922 update 6 open Settings/Update manual to 6.2.3 - after reboot power down forced nas - prepared a new usb stick with rd.gz and zimage from 6.2.3 pat and extra/extra2 from IG88 -boot with new usb drive -done

Loader version and type: 1.04b DS918+ DSM version in use (including critical update): DSM 6.2.2-24922 Update 5 Using custom modules/ramdisk?: 0.8_syno ds918+ - extra.lzma/extra2.lzma for loader 1.04b_mod ds918+ and replaced zImage and rd.gz from DSM_DS918+_24922.pat to loader. Hardware details: ASRock J5005-ITX, 2x8Gb ram. LAN: Realtek RTL8111H Gigabit SATA3: 2x Intel via chipset, 2x ASMedia ASM1061 Comments: clean install, used DSM_DS918+_24922.pat, perfect. Sent from my GM1913 using Tapatalk

I'm not interested in transcondig .... i use a rspi with kodi to play media from nas ...

Success with an AsRock J5005-ITX using 1.04b with 0.8_syno ds918+ How i do'it: - download 1.04b loader - using osfmount mount loader and edited grub conf (notepad++ ) - copyed zImage and rd.gz from the "DSM_DS918+_24922.pat" file to 2nd loader partition together with the new extra/extra2 from IG-88 0.8_syno ds918+ - save loader and writing to usb disk and boot - install DSM_DS918+_24922.pat - update manual dsm to 24922 critical update 5 - done Thanks @IG-88

based on this yes is good https://xpenology.com/forum/topic/13478-8th-gen-i5-asrock-h370m-itxac-works-w-dsm-62123824/

I tried and ds3617 but got error on instalation of pat file and after that its shows messages somethig with migrate software... Somebody can help me ? Sent from my ONEPLUS A5010 using Tapatalk

me too i tried to install ds3615 to TS-470-PRO (I3-3220, 8 Gb ram, 1 Hdd 350 Gb) with DS3615xs 6.1 Jun's Mod V1.02b.img from usb disk - i change boot order on TS to boot from stick - after TS-470-Pro boot jun loader, - start synology assistant and after find'it on search i choose to install DSM_DS3615xs_15217.pat - the problem arises after reboot ... assistant not continue installation (not find TS) ... stay on system is rebooting (even if machine respond to ping) - if i force reboot assistant find machine but say to recover system .... but after reboot again .. not find'it Please help me if i made something wrong thanks

Done with Bridget network. Thanx

Hi, I'm trying to create a VM using Virtualbox and last jun's loader version (1.02b). All good until synology assistant not find anything. what is wrong ? Virtualbox show this message for 10 minutes

any news about qnap s.o. porting ?

I questions to synology regarding hdmi output and xbmc on synology products and response is:

I played today with firmware recovery for ts-470 from here: http://wiki.qnap.com/wiki/Firmware_Recovery based on infos from here ( http://reverseengineering.stackexchange ... extraction ) i managed to unpack the firmware # dd if=F_TS-470_20140519-1.2.8.img bs=512 of=part1 skip=32 count=2160w # dd if=F_TS-470_20140519-1.2.8.img bs=512 of=part2 skip=4352 count=242304w # dd if=F_TS-470_20140519-1.2.8.img bs=512 of=part3 skip=488960 count=242304w # dd if=F_TS-470_20140519-1.2.8.img bs=512 of=part5 skip=973600 count=8304w # dd if=F_TS-470_20140519-1.2.8.img bs=512 of=part6 skip=990240 count=8688w # mount -r part2 /mnt/ts2 -o loop but from now on I do not know what to do maybe someone with more experience can succeed to porting qnap s.o.