IG-88 Posted March 11, 2023 Share #601 Posted March 11, 2023 (edited) On 3/9/2023 at 4:11 PM, Jerryhze said: Next: going to try some 4th gen and 6th gen desktop CPUs and see if AI works kind of a limbo contest? your E3-1225 v3 is 4th gen aka haswell, so you can skip other 4th gen cpu's there are gpu gen's too (kind of), we usually reference cpu gen's here but when it comes to the AI stuff it might be interesting to see what cpu has what gpu gen (dva1622 is gemini lake aka gpu gen 9.5) Intel GPU Gen's Gen 1 810, 815 Gen 2 i830M, 845G, 855GM, 865G Gen 3 915G/GM, 945G/GM, G/Q33, Q35, Atom D4xx/D5xx/N4xx/N5xx Gen 4 965G/GM/Q, G35, G41, G/Q43, G/GM/Q45 Gen 5 Nehalem (Ironlake) Gen 6 Sandy Bridge Gen 7 Ivy Bridge, Valley View, Bay Trail Gen 7.5 Haswell Gen 8 Broadwell, Cherryview Gen 9 Skylake, Broxton, Apollo Lake Gen 9.5 Kaby Lake, Coffee Lake, Gemini Lake Gen 10 Cannon Lake Gen 11 Elkhart Lake, Ice Lake Gen 12 Tiger Lake https://en.wikipedia.org/wiki/Intel_HD_and_Iris_Graphics#Generation_nine_based and even QSV has version numbers https://en.wikipedia.org/wiki/Intel_Quick_Sync_Video (in that article is a nice table about features) if it's about HEVC de-/encoding then it might start with skylake Edited March 13, 2023 by IG-88 1 Quote Link to comment Share on other sites More sharing options...
IG-88 Posted March 11, 2023 Share #602 Posted March 11, 2023 8 hours ago, willysoft80 said: Hi, I have a Nuc 11 with i7-1185G7 processor. I managed to get a VM running on proxmox with DVA1622, but AI doesn't work. you would need to pass through the gpu to into the vm but as its a Xe GPU you will not have success as we don't have a driver for these, 10th gen with its "older" UHD 6xx gpu is max. when it comes to intel quick sync video (AI) support later on with kernel 5.x based units i'd expect support for newer gpu's (but its not proven that a Xe gpu can handle all the things needed for the AI stuff in the way a UHD units do, if you want that working in 2023 i'd say use something with a 10th gen cpu and use what is now available (7.2 is not the new "all kernel 5.x" its more or less the same as 7.1 when it comes to kernel, synology might bring new units with 5.x kernel like SA6400 but there is to much uncertain to make predictions, synology is in control) Quote Link to comment Share on other sites More sharing options...
Alex osorio Posted March 13, 2023 Share #603 Posted March 13, 2023 I am having problems to output via HDMI, the screen is going blank, the processor I use is an i3 6100, the controllers H110/H170 Express Chipset. any suggestions Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted March 13, 2023 Share #604 Posted March 13, 2023 (edited) 1 hour ago, Alex osorio said: I am having problems to output via HDMI, the screen is going blank, the processor I use is an i3 6100, the controllers H110/H170 Express Chipset. any suggestions Very strange I have a laptop with same cpu when I used older version of loader 0.9.0 with dsm 7.0 it was displaying dsm on screen Edit: it was TCRP by Pocopico Edited March 13, 2023 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
Alex osorio Posted March 13, 2023 Share #605 Posted March 13, 2023 32 minutes ago, dimakv2014 said: Very strange I have a laptop with same cpu when I used older version of loader 0.9.0 with dsm 7.0 it was displaying dsm on screen Edit: it was TCRP by Pocopico i used tinycore-redpill.v0.9.4.0 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted March 13, 2023 Share #606 Posted March 13, 2023 Just now, Alex osorio said: i used tinycore-redpill.v0.9.4.0 I will test it tomorrow and write back if I will have same problems with display output on same cpu. Quote Link to comment Share on other sites More sharing options...
chaplin_lee Posted March 14, 2023 Share #607 Posted March 14, 2023 (edited) Hardware: Asrock Deskmini 110, Pentium G4560, 8Gb RAM, 120GB 2.5" HDD Installation: Barebone Successfully install DVA1622 DSM 7.1.1-42962 with ARPL v1.1-beta2a but there is no license in Surveillance station 😑 Anyone encounter the same issue? Previously i tested on ESXi (E3-1245v2) with DVA1622 using ARPL v1-beta2 no such issue. Want to explore the face detection but now stuck Edited March 14, 2023 by chaplin_lee Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 14, 2023 Share #608 Posted March 14, 2023 If you don't have any licence, you did not chose the right serial generation. The serial trigram for DVA1622 is : UBR But it works with the one from DVA3221 too : SJR You have to use the generate serial menu from ARPL after choosing the Syno model. With DVA loaders you should have 8 licences. Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted March 14, 2023 Share #609 Posted March 14, 2023 (edited) 19 hours ago, Alex osorio said: i used tinycore-redpill.v0.9.4.0 ok as promised test and it display works on i3-6100U cpu with 0.9.4.0 version of TCRP, DSM is 7.1-42661 Edited March 14, 2023 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
Alex osorio Posted March 14, 2023 Share #610 Posted March 14, 2023 3 hours ago, dimakv2014 said: ok as promised test and it display works on i3-6100U cpu with 0.9.4.0 version of TCRP, DSM is 7.1-42661 I really don't know what I'm doing wrong, try again and nothing the commans that i used ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build dva1622-7.1.1-42962 Sudo reboot Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted March 14, 2023 Share #611 Posted March 14, 2023 (edited) 46 minutes ago, Alex osorio said: I really don't know what I'm doing wrong, try again and nothing the commans that i used ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build dva1622-7.1.1-42962 Sudo reboot I didnt do Update and Fullupgrade commands. Basically commands that I have used are: ./rploader.sh identifyusb ./rploader.sh serialgen DVA1622 ./rploader.sh build dva1622-7.1.0-42661 sudo reboot P.S. Also since you have Desktop version of same cpu, make sure that in bios you have enabled igpu as primary video adapter and cable hooked to it. Edited March 14, 2023 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
chaplin_lee Posted March 15, 2023 Share #612 Posted March 15, 2023 9 hours ago, Orphée said: If you don't have any licence, you did not chose the right serial generation. The serial trigram for DVA1622 is : UBR But it works with the one from DVA3221 too : SJR You have to use the generate serial menu from ARPL after choosing the Syno model. With DVA loaders you should have 8 licences. Thank you for the information. I will re-install it later today. Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 15, 2023 Share #613 Posted March 15, 2023 6 hours ago, chaplin_lee said: Thank you for the information. I will re-install it later today. Just start again "configure loader" generate the serial build the loader boot the loader It won't redo everything, it will be fast as it will just update the serial. Quote Link to comment Share on other sites More sharing options...
chaplin_lee Posted March 15, 2023 Share #614 Posted March 15, 2023 (edited) 6 hours ago, Orphée said: Just start again "configure loader" generate the serial build the loader boot the loader It won't redo everything, it will be fast as it will just update the serial. I tried a few times, it does change its serial number, but it always come with SJR and i can't get any license. Do you know any serial gen that can do DVA1622 or UBR serial? Edited March 15, 2023 by chaplin_lee Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 15, 2023 Share #615 Posted March 15, 2023 15 minutes ago, chaplin_lee said: I tried a few times, it does change its serial number, but it always come with SJR and i can't get any license. Do you know any serial gen that can do DVA1622 or UBR serial? I don't understand how you "can't get any license". If you build DVA1622 loader with serial generated for it (works with SJR). You have 8 licences included in Surveillance Station. Quote Link to comment Share on other sites More sharing options...
Alex osorio Posted March 15, 2023 Share #616 Posted March 15, 2023 19 hours ago, dimakv2014 said: I didnt do Update and Fullupgrade commands. Basically commands that I have used are: ./rploader.sh identifyusb ./rploader.sh serialgen DVA1622 ./rploader.sh build dva1622-7.1.0-42661 sudo reboot P.S. Also since you have Desktop version of same cpu, make sure that in bios you have enabled igpu as primary video adapter and cable hooked to it. i succes , thanks to that reminder of the video output, I have a small problem with the output to HDMI through the vga everything works fine Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted March 15, 2023 Share #617 Posted March 15, 2023 3 hours ago, Alex osorio said: i succes , thanks to that reminder of the video output, I have a small problem with the output to HDMI through the vga everything works fine Glad it worked for you buddy Quote Link to comment Share on other sites More sharing options...
chaplin_lee Posted March 16, 2023 Share #618 Posted March 16, 2023 On 3/15/2023 at 10:42 PM, Orphée said: I don't understand how you "can't get any license". If you build DVA1622 loader with serial generated for it (works with SJR). You have 8 licences included in Surveillance Station. This is what i mean. As u can see the serial number is SJR , but when i open survillance station it shows no llicense Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted March 16, 2023 Share #619 Posted March 16, 2023 5 minutes ago, chaplin_lee said: This is what i mean. As u can see the serial number is SJR , but when i open survillance station it shows no llicense Its not ARPL topic its Jun mode discussion here, its totally different loader and its not automated. You should go to ARPL topic and ask this question over there, maybe it has to do with a loader version. Also what you can try is regenerate SN multiple times maybe it will help. Quote Link to comment Share on other sites More sharing options...
chaplin_lee Posted March 16, 2023 Share #620 Posted March 16, 2023 7 minutes ago, dimakv2014 said: Its not ARPL topic its Jun mode discussion here, its totally different loader and its not automated. You should go to ARPL topic and ask this question over there, maybe it has to do with a loader version. Also what you can try is regenerate SN multiple times maybe it will help. Thank you for the info. Let me use the Jun mod and config using TC Quote Link to comment Share on other sites More sharing options...
chaplin_lee Posted March 17, 2023 Share #621 Posted March 17, 2023 15 hours ago, dimakv2014 said: Its not ARPL topic its Jun mode discussion here, its totally different loader and its not automated. You should go to ARPL topic and ask this question over there, maybe it has to do with a loader version. Also what you can try is regenerate SN multiple times maybe it will help. i tried using tinycore-redpill have the same issue. I guess i should format the hdd and try all over again fresh Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 17, 2023 Share #622 Posted March 17, 2023 (edited) Unless Synology sent a new Surveillance Station release that I'm not aware of that check the real SN... You are currently the only report for this issue... Edited March 17, 2023 by Orphée 1 Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 17, 2023 Share #623 Posted March 17, 2023 (edited) Just installed a new fresh DVA1622 with ARPL on a new VM (proxmox) with generated serial from loader Are you running baremetal or VM ? if VM, did you give the minimum required specs ? Like the original one : 1cpu 4 cores ? 4GB Ram ? Edited March 17, 2023 by Orphée Quote Link to comment Share on other sites More sharing options...
IG-88 Posted March 17, 2023 Share #624 Posted March 17, 2023 (edited) new 9.1.0-10660 introduces a check, i uninstalled it and installed https://global.synologydownload.com/download/Package/spk/SurveillanceStation/9.0.2-10061/SurveillanceStation-x86_64-9.0.2-10061_openvino.spk again and the 8 cam default license is back will be interesting to see if the normal (non dva/openvino) 9.1 also breaks the default license on all the other systems Edited March 17, 2023 by IG-88 1 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted March 17, 2023 Share #625 Posted March 17, 2023 (edited) 51 minutes ago, IG-88 said: new 9.1.0-10660 introduces a check, i uninstalled it and installed https://global.synologydownload.com/download/Package/spk/SurveillanceStation/9.0.2-10061/SurveillanceStation-x86_64-9.0.2-10061_openvino.spk again and the 8 cam default license is back will be interesting to see if the normal (non dva/openvino) 9.1 also breaks the default license on all the other systems Moreover, it stops Push notifications even on official license after some time and some cameras are being disconnected constantly, it doesn't bring any new major features but breaks SS, so its better to stick with older versions. Edit: and stop automatic updates)) Edited March 17, 2023 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.