blue max Posted July 16, 2023 Share #926 Posted July 16, 2023 (edited) Sorry, see below... Edited July 16, 2023 by blue max posted in error Quote Link to comment Share on other sites More sharing options...
blue max Posted July 16, 2023 Share #927 Posted July 16, 2023 Finally it worked! Using the M Shell version of the installer. No idea what changed, but I put a spare hard drive in and that may have been the catalyst. 2 Quote Link to comment Share on other sites More sharing options...
Joewydiart Posted July 16, 2023 Share #928 Posted July 16, 2023 (edited) Is there a way to access to xpenology if I forgot my Pass. There is no ssh nor admin activated? 😒 Or if I reinstall will I lose my data? Edited July 16, 2023 by Joewydiart Quote Link to comment Share on other sites More sharing options...
wahabe Posted July 17, 2023 Share #929 Posted July 17, 2023 On 7/12/2023 at 4:09 PM, Peter Suh said: These are my 2.5GB NIC transfer speed test results. Synology DS3622xs+ used 80G INTEL SATA 6Gbp/s SSD instead of HDD. hi Peter Is the DSM 7.2 Loader stable? There is a difference in speed check Blackmagic Disk Speed Test arpl i18n loader DSM 7.2 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 17, 2023 Author Share #930 Posted July 17, 2023 47 minutes ago, wahabe said: hi Peter Is the DSM 7.2 Loader stable? There is a difference in speed check Blackmagic Disk Speed Test arpl i18n loader DSM 7.2 The attached image is broken. Quote Link to comment Share on other sites More sharing options...
wahabe Posted July 17, 2023 Share #931 Posted July 17, 2023 Blackmagic Disk Speed Test arpl i18n loader DSM 7.2 Quote Link to comment Share on other sites More sharing options...
wahabe Posted July 17, 2023 Share #932 Posted July 17, 2023 Blackmagic Disk Speed Test jumkey loader DSM 7.1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 17, 2023 Author Share #933 Posted July 17, 2023 4 minutes ago, wahabe said: Blackmagic Disk Speed Test jumkey loader DSM 7.1 I know that jumkey doesn't make its own loader. Which loader do you mean exactly? https://github.com/jumkey?tab=repositories Quote Link to comment Share on other sites More sharing options...
wahabe Posted July 17, 2023 Share #934 Posted July 17, 2023 Blackmagic Disk Speed Test Blackmagic Disk Speed Test.part1.rar Quote Link to comment Share on other sites More sharing options...
wahabe Posted July 17, 2023 Share #935 Posted July 17, 2023 Blackmagic Disk Speed Test.part2.rar Quote Link to comment Share on other sites More sharing options...
wahabe Posted July 17, 2023 Share #936 Posted July 17, 2023 4 minutes ago, Peter Suh said: I know that jumkey doesn't make its own loader. Which loader do you mean exactly? https://github.com/jumkey?tab=repositories redpill tool chain Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 17, 2023 Author Share #937 Posted July 17, 2023 6 minutes ago, wahabe said: redpill tool chain All modules related to 10G NIC, whether ARPL or chain tool, started from pocopico, which developed TCRP. If the same nic module is applied and there is a difference, it may be due to the characteristics of the kernel loading the module. Once you try TCRP, if you have any problems, please contact us through an issue. Quote Link to comment Share on other sites More sharing options...
wahabe Posted July 17, 2023 Share #938 Posted July 17, 2023 Thanks Peter I will try TCRP 1 Quote Link to comment Share on other sites More sharing options...
Plex4Me Posted July 20, 2023 Share #939 Posted July 20, 2023 (edited) Hi, sorry to jump in here randomly. I’m quite noob at this but have been trying to follow the guide from page 1. I have a Thecus N5550 which from older tutorials I’ve seen utilise DS3615xs I feel I’ve done all the steps as above, the ones that don’t work for me are firstly from step 6 I receive the message “Error : Platform not found : rploader.sh” tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8101/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8152/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8168/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/igp/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json and then from step 8 [DS3615xs] ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3615xs ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build bromolow-7.0.1-42218 ./rploader.sh clean now ./rploader.sh build bromolow-7.1.0-42661 ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; </quote> I guess after running all steps except these that failed, I get presented with the boot menu and boot into “RedPill DS3615xs 7.1.1-42962 (USB, Verbose)”, however it gets stuck at the message: Loading Linux… Loading initramfs… Starting kernel with USB boot _ im pretty lost right now I feel so close yet so far. Edited July 20, 2023 by Plex4Me Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 21, 2023 Author Share #940 Posted July 21, 2023 (edited) 9 hours ago, Plex4Me said: Hi, sorry to jump in here randomly. I’m quite noob at this but have been trying to follow the guide from page 1. I have a Thecus N5550 which from older tutorials I’ve seen utilise DS3615xs I feel I’ve done all the steps as above, the ones that don’t work for me are firstly from step 6 I receive the message “Error : Platform not found : rploader.sh” tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8101/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8152/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8168/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/igp/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json tc@box:~$ ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json and then from step 8 [DS3615xs] ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3615xs ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build bromolow-7.0.1-42218 ./rploader.sh clean now ./rploader.sh build bromolow-7.1.0-42661 ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; </quote> I guess after running all steps except these that failed, I get presented with the boot menu and boot into “RedPill DS3615xs 7.1.1-42962 (USB, Verbose)”, however it gets stuck at the message: Loading Linux… Loading initramfs… Starting kernel with USB boot _ im pretty lost right now I feel so close yet so far. The front page guide I wrote for this topic is too old. Even if I want to edit it, it is blocked by the administrator and I cannot edit it. This is the policy of this site. That's why some users still follow the old way of building loaders using commands. None of the current XPENOLOGY loaders use the command method. Both menu method and WEBUI are adopted. Since it is difficult to renew the existing guide, there is a request to update it with a new guide, but it seems meaningless unless the existing guide is deleted. First of all, please refer to the guide on my M SHELL for TCRP github page. Build the loader menu-driven. Modules are added automatically, so you don't have to add them one by one. https://github.com/PeterSuh-Q3/tinycore-redpill https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.4.3-2 Edited July 21, 2023 by Peter Suh 1 Quote Link to comment Share on other sites More sharing options...
Plex4Me Posted July 21, 2023 Share #941 Posted July 21, 2023 47 minutes ago, Peter Suh said: The front page guide I wrote for this topic is too old. Even if I want to edit it, it is blocked by the administrator and I cannot edit it. This is the policy of this site. That's why some users still follow the old way of building loaders using commands. None of the current XPENOLOGY loaders use the command method. Both menu method and WEBUI are adopted. Since it is difficult to renew the existing guide, there is a request to update it with a new guide, but it seems meaningless unless the existing guide is deleted. First of all, please refer to the guide on my M SHELL for TCRP github page. Build the loader menu-driven. Modules are added automatically, so you don't have to add them one by one. https://github.com/PeterSuh-Q3/tinycore-redpill https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.4.3-2 thank you, and I hope I did not come off ungrateful in anyway just a little confused I will take a look at those links, I had pulled your latest IMG file but was not aware of the automation scripts. When you say M SHELL for TCRP a lot of this is going over my head so i will do my best not to have to ask you many questions lol 1 Quote Link to comment Share on other sites More sharing options...
Vodka2014 Posted July 21, 2023 Share #942 Posted July 21, 2023 Hi @Peter Suh I just want to know is it all ok to update to the last DSM with the latest loader of yours -with friend enabled ? So going from DSM 7.1.1-42962 Update 5 -> DSM 7.2-64570 Update 1 Are there any major issues or things to note. Thanks Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 21, 2023 Author Share #943 Posted July 21, 2023 4 hours ago, Vodka2014 said: Hi @Peter Suh I just want to know is it all ok to update to the last DSM with the latest loader of yours -with friend enabled ? So going from DSM 7.1.1-42962 Update 5 -> DSM 7.2-64570 Update 1 Are there any major issues or things to note. Thanks M-SHELL is already well compliant with DSM 7.2-64570 U1. recommended way Coming back to the TCRP loader build menu, the first step is to build a loader for DSM 7.2-64570. You will be asked to reinstall DSM for 7.2. Proceed with the installation as requested. There are no special precautions. Quote Link to comment Share on other sites More sharing options...
Vodka2014 Posted July 21, 2023 Share #944 Posted July 21, 2023 1 hour ago, Peter Suh said: M-SHELL is already well compliant with DSM 7.2-64570 U1. recommended way Coming back to the TCRP loader build menu, the first step is to build a loader for DSM 7.2-64570. You will be asked to reinstall DSM for 7.2. Proceed with the installation as requested. There are no special precautions. Thanks so you have to rebuild the loader ? Is there no way an Wiki can get setup with all the latest steps on builds etc... as the main page is still out of date. Thanks again Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 21, 2023 Author Share #945 Posted July 21, 2023 7 minutes ago, Vodka2014 said: Thanks so you have to rebuild the loader ? Is there no way an Wiki can get setup with all the latest steps on builds etc... as the main page is still out of date. Thanks again Just today, I mentioned a guide renewal because of that problem. There is no way to do this unless the administrator allows it. https://xpenology.com/forum/topic/60130-redpill-tinycore-loader-installation-guide-for-dsm-71-baremetal/?do=findComment&comment=447311 1 Quote Link to comment Share on other sites More sharing options...
Vodka2014 Posted July 21, 2023 Share #946 Posted July 21, 2023 6 minutes ago, Peter Suh said: Just today, I mentioned a guide renewal because of that problem. There is no way to do this unless the administrator allows it. https://xpenology.com/forum/topic/60130-redpill-tinycore-loader-installation-guide-for-dsm-71-baremetal/?do=findComment&comment=447311 Ah LOL. So to confirm i need to rebuild the loader correct following ur mshell like last time with friend ? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 21, 2023 Author Share #947 Posted July 21, 2023 (edited) 2 minutes ago, Vodka2014 said: Ah LOL. So to confirm i need to rebuild the loader correct following ur mshell like last time with friend ? Yes, that's right. And, I just sent a letter to the moderators. I inquired about how to renew the tutorial. Edited July 21, 2023 by Peter Suh 1 Quote Link to comment Share on other sites More sharing options...
Vodka2014 Posted July 21, 2023 Share #948 Posted July 21, 2023 1 minute ago, Peter Suh said: Yes, that's right. And, I just sent a letter to the moderators. I inquired about how to renew the tutorial. Thanks again @Peter Suh Quote Link to comment Share on other sites More sharing options...
Plex4Me Posted July 23, 2023 Share #949 Posted July 23, 2023 ok...finally found that TCRP and your TCRP are diff lol. Got it installed and booted i see the device on my network through my unifi gateway and hasnt dropped off like it did with the manual versions. However I cannot load into the DSM through its URL or URL+port5000. Here is a screenshot of what the NAS shows, note i have 2GB RAM, would this be my issue now? Or do you see something else out of the ord? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 23, 2023 Author Share #950 Posted July 23, 2023 2 hours ago, Plex4Me said: ok...finally found that TCRP and your TCRP are diff lol. Got it installed and booted i see the device on my network through my unifi gateway and hasnt dropped off like it did with the manual versions. However I cannot load into the DSM through its URL or URL+port5000. Here is a screenshot of what the NAS shows, note i have 2GB RAM, would this be my issue now? Or do you see something else out of the ord? Can you ping the IP address 10.0.0.28? What does URL mean? Did you try http://10.0.0.28:5000 ? Are the LEDs on both of your dual NICs blinking? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.