Peter Suh Posted May 11, 2022 Share #3251 Posted May 11, 2022 (edited) 26 minutes ago, g4sho said: I will look but I have changed nothing in the boot loader., I am using the defaults that come with the latest tinycore build download. It looks like it is the developement branch if what I think I see is correct. But like I said this is what came default with the download as of yesterday. So do I need to edit this to say master branch? customconfigjson.txt 1.36 kB · 1 download Shouldn't you avoid duplication of dca.ko on the three NICs? This redundancy is actually It may be a problem between pocopico.igb and pocopico.ixgbe. I think a few weeks ago, in a post, we saw that to avoid this, we should use vanilla, which is included by default in DS3622xs+ Shouldn't we build a manual so that pocopico.ixgbe is not automatically included when the DS3622xs+ loader is built? Edited May 11, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
znation Posted May 11, 2022 Share #3252 Posted May 11, 2022 (edited) Il y a 19 heures, pocopico a dit : I'm afraid there is no other option at the moment, you will have to update the loader. Hello, i not agree with this. Until DSM 7.0.1 i was able to patch acpi without loader change by running this script (taken somewhere in this forum) https://1fichier.com/?ho5p48cyue2dvxqgq29r With DSM 7.1, no way found without loader change Edited May 11, 2022 by znation Quote Link to comment Share on other sites More sharing options...
g4sho Posted May 11, 2022 Share #3253 Posted May 11, 2022 (edited) 18 minutes ago, Peter Suh said: Shouldn't you avoid duplication of dca.ko on the two NICs? I think a few weeks ago, in a post, we saw that to avoid this, we should use vanilla, which is included by default in DS3622xs+ Shouldn't we build a manual so that igbxe is not automatically included when the DS3622xs+ loader is built? Can you explain what I need to do? For clarification. I am using two(indentical) redpill vm's on one proxmox server. I am passing thru one port each of a two port(10Gbe) nic to each vm. I am checking the 1st vm now that does not exhibit this problem, to see if the custom.config.json, is some how different. Edited May 11, 2022 by g4sho Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted May 11, 2022 Share #3254 Posted May 11, 2022 (edited) 40 minutes ago, g4sho said: Can you explain what I need to do? For clarification. I am using two(indentical) redpill vm's on one proxmox server. I am passing thru one port each of a two port(10Gbe) nic to each vm. I am checking the 1st vm now that does not exhibit this problem, to see if the custom.config.json, is some how different. If the redpill-load directory is still in the TC, Under ./redpill-load/c*/e*, you will see three or more directories as follows: pocopico.e1000e pocopico.igb pocopico.ixgbe If you don't have a redpill-load in advance, ./rploader.sh build broadwellnk-7.0.1-42218 build first to obtain the redpill-load directory. Among them, the pocopico.ixgbe is deleted by force with the sudo rm -rf command Perform the ./rploader.sh build broadwellnk-7.0.1-42218 manual to rebuild the loader without pocopico.ixgbe. DS3622xxs+ already contains vanilla ixgbe ext, so I understand that it should not be added again. Since I don't actually have the above NIC, I haven't tested it myself and only know it in theory. Edited May 11, 2022 by Peter Suh 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted May 11, 2022 Share #3255 Posted May 11, 2022 (edited) [NOTICE] @pocopico's ext, r8152, of the RealTek USB-type NIC has been replaced with the stable bb-qq's r8152.ko. Normal use is now available. Both 1GB and 2.5GB speed NICs are supported. Currently, all six models except the DS1621+ have been tested successfully. (The V1000 platform, DS1621+, is not yet on the repo of bb-qq.) The test of the 2.5GB product was helped by @dolbycat. This requires manual addition of the r8152 ext as "myv.sh" or "rploader.sh". Since r8152 is not automatically added, there is no need to worry about duplicate generation. @dolbycat's Reporting for RealTek 2.5g usb NICs. Maybe it's not limited to 2.5G, but it's also the same for 1G. The xHCI of the USB option must not be disabled in the BIOS. Activation must be enabled. In addition, there is a phenomenon that USB NICs are recognized before internal NICs. Edited May 11, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
g4sho Posted May 11, 2022 Share #3256 Posted May 11, 2022 20 minutes ago, Peter Suh said: If the redpill-load directory is still in the TC, Under ./redpill-load/c*/e*, you will see three or more directories as follows: pocopico.e1000e pocopico.igb pocopico.ixgbe If you don't have a redpill-load in advance, ./rploader.sh build broadwellnk-7.0.1-42218 build first to obtain the redpill-load directory. Among them, the pocopico.ixgbe is deleted by force with the sudo rm -rf command Perform the ./rploader.sh build broadwellnk-7.0.1-42218 manual to rebuild the loader without pocopico.ixgbe. DS3622xxs+ already contains vanilla ixgbe ext, so I understand that it should not be added again. Since I don't actually have the above NIC, I haven't tested it myself and only know it in theory. Thanks alot Peter! Quote Link to comment Share on other sites More sharing options...
flyride Posted May 11, 2022 Share #3257 Posted May 11, 2022 On 5/9/2022 at 6:46 PM, flyride said: Has anyone been able to get an install of DS920+ up and running under ESXi/SATABoot? If so, please post details. 21 hours ago, pocopico said: I have tested on VMware Workstation, i expect that to work on ESXi as well. The process is more or less the same as physical 1. Download the TCRP vmdk from REPO. 2. Create a Virtual machine with at least 2GB RAM 3. Attach the VMDK to SATA0:0 4. Data Disks to SATA1:0….X 5. Boot to tinycore 6. Perform a rploader.sh upgrade : ./rploader.sh update now 7. Perform a full upgrade : ./rploader.sh fullupgrade now 8. Generate a serial : ./rploader.sh serialgen DS920+ 9. Edit user_config.json : make sure SataPortMap=1 or leave default "58" 10. Check contents of user_config.json : cat user_config.json 11. Identify required modules and add extensions : ./rploader.sh listmods geminilake-7.1.0-42661 12. Build loader : ./rploader.sh build geminilake-7.1.0-42661 Still unsuccessful in making DS920+ and DS1621+ work on ESXi. I've been able to get a /dev/sata1 device to be generted by manual edit of dts file as outlined in this thread. While the disk is physically accessible (/dev/sata1 created, fdisk -l provides proper results) it is not usable by to the installation procedure (no disks detected). Any ideas where to go next? Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 11, 2022 Author Share #3258 Posted May 11, 2022 12 minutes ago, flyride said: Still unsuccessful in making DS920+ and DS1621+ work on ESXi. I've been able to get a /dev/sata1 device to be generted by manual edit of dts file as outlined in this thread. While the disk is physically accessible (/dev/sata1 created, fdisk -l provides proper results) it is not usable by to the installation procedure (no disks detected). Any ideas where to go next? Hi, it should work after you edit the /var/run/model.dtb and do a rescan from the GUI Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted May 11, 2022 Share #3259 Posted May 11, 2022 2 hours ago, Peter Suh said: @pocopico I'm sorry. I certainly didn't mention baremetal @Al lex, isn't that baremetal? The patch you mentioned is for VM only, right? I just built DS918+ using 0.7.0.7 version with HBA, and as captured, the problem I knew continues even now. Is it possible to repair the part of the HBA that can't find the uuid like in the log? junior log (Reveal hidden contents) DiskStation> cat linuxrc.syno.log START /linuxrc.syno.impl Insert basic USB modules... :: Loading module usb-common ... [ OK ] :: Loading module usbcore ... [ OK ] :: Loading module xhci-hcd ... [ OK ] :: Loading module xhci-pci ... [ OK ] :: Loading module usb-storage ... [ OK ] :: Loading kernel modules from extensions ... Loading kmod #0 "e1000e.ko" for pocopico.e1000e (args: ) Loading kmod #0 "raid_class.ko" for pocopico.mpt3sas (args: ) Loading kmod #1 "scsi_transport_sas.ko" for pocopico.mpt3sas (args: ) Loading kmod #2 "mpt3sas.ko" for pocopico.mpt3sas (args: ) :: Loading kernel modules from extensions ... [ OK ] :: Executing "on_boot" custom scripts ... Running "check-e1000e.sh" for pocopico.e1000e->on_boot Loading module e1000e -> Module e1000e loaded succesfully Ran "check-e1000e.sh" for pocopico.e1000e->on_boot - exit=0 Running "check-mpt3sas.sh" for pocopico.mpt3sas->on_boot Loading module mpt3sas -> Module mpt3sas loaded succesfully Ran "check-mpt3sas.sh" for pocopico.mpt3sas->on_boot - exit=0 Running "boot-wait.sh" for redpill-boot-wait->on_boot Still waiting for boot device (waited 1 of 30 seconds) Still waiting for boot device (waited 2 of 30 seconds) Still waiting for boot device (waited 3 of 30 seconds) Still waiting for boot device (waited 4 of 30 seconds) Still waiting for boot device (waited 5 of 30 seconds) Still waiting for boot device (waited 6 of 30 seconds) Confirmed a valid-looking /dev/synoboot device Ran "boot-wait.sh" for redpill-boot-wait->on_boot - exit=0 Running "install_rd.sh" for redpill-misc->on_boot Starting ttyd, listening on port: 7681 Ran "install_rd.sh" for redpill-misc->on_boot - exit=0 :: Executing "on_boot" custom scripts ... [ OK ] Extensions processed Insert net driver(Mindspeed only)... Starting /usr/syno/bin/synocfgen... /usr/syno/bin/synocfgen returns 0 Insert synorbd kernel module Insert synofsbd kernel module Insert sha256 kernel module Assemble args: -u 2051472f:f71136d6:3017a5a8:c86610be /dev/sda1 /dev/sde1 /dev/sdf1 mdadm: /dev/sde1 has wrong uuid. mdadm: /dev/sdf1 has wrong uuid. mdadm: /dev/md0 has been started with 1 drive (out of 16). Partition Version=9 /sbin/e2fsck exists, checking /dev/md0... e2fsck 1.44.1 (24-Mar-2018) /sbin/e2fsck -yvf returns 0 Mounting /dev/md0 /tmpRoot ------------upgrade Begin upgrade procedure Failed to found any patch No upgrade file found ============upgrade ------------bootup-smallupdate Failed to AssertFileKeyValueEqual value1: /etc.defaults/synoinfo.conf:unique -> synology_apollolake_918+ value2: /tmpRoot/etc.defaults/synoinfo.conf:unique => synology_v1000_1621+ Skip bootup smallupdate, because root is not matched to junior ============bootup-smallupdate Failed to AssertFileKeyValueEqual value1: /etc.defaults/synoinfo.conf:unique -> synology_apollolake_918+ value2: /tmpRoot/etc.defaults/synoinfo.conf:unique => synology_v1000_1621+ Exit on error [7] root not matched with junior... Wed May 11 11:43:42 UTC 2022 /dev/md0 /tmpRoot ext4 rw,relatime,data=ordered lrwxrwxrwx 1 root root 0 May 11 11:43 sda -> ../devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0/block/sda lrwxrwxrwx 1 root root 0 May 11 11:43 sde -> ../devices/pci0000:00/0000:00:01.0/0000:01:00.0/host4/port-4:0/end_device-4:0/target4:0:0/4:0:0:0/block/sde lrwxrwxrwx 1 root root 0 May 11 11:43 sdf -> ../devices/pci0000:00/0000:00:01.0/0000:01:00.0/host4/port-4:1/end_device-4:1/target4:0:1/4:0:1:0/block/sdf @pocopico Is it impossible yet? I have read that the new LSI has no problem, but the old model is difficult to support. Should I give up for now? Quote Link to comment Share on other sites More sharing options...
Chedda Posted May 11, 2022 Share #3260 Posted May 11, 2022 (edited) Is there a place or a thread started for the custom config file settings? As in, how to do the sata port configs and all other configurable items? I have not been able to go past 12 drives in my setup. I have posted my customconfig.json but didn't hear anything back. @pocopico Edited May 11, 2022 by Chedda it didn't tag for some reason Quote Link to comment Share on other sites More sharing options...
cferra Posted May 11, 2022 Share #3261 Posted May 11, 2022 5 minutes ago, Peter Suh said: @pocopico Is it impossible yet? I have read that the new LSI has no problem, but the old model is difficult to support. Should I give up for now? On 3622, with an LSI controller, would this help with smart data on SAS drives? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted May 11, 2022 Share #3262 Posted May 11, 2022 6 minutes ago, Chedda said: Is there a place or a thread started for the custom config file settings? As in, how to do the sata port configs and all other configurable items? I have not been able to go past 12 drives in my setup. I have posted my customconfig.json but didn't hear anything back. @pocopico Set user_config.json as below maxdisks = 36 internalportcfg = 0xfffffffff 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 11, 2022 Author Share #3263 Posted May 11, 2022 5 minutes ago, Peter Suh said: @pocopico Is it impossible yet? I have read that the new LSI has no problem, but the old model is difficult to support. Should I give up for now? if smartctl --all /dev/sdxx reports serial number correctly it should work. I think it depends on the HBA whether is reports smart data or not. Quote Link to comment Share on other sites More sharing options...
cferra Posted May 11, 2022 Share #3264 Posted May 11, 2022 Just now, pocopico said: if smartctl --all /dev/sdxx reports serial number correctly it should work. I think it depends on the HBA whether is reports smart data or not. So I’d just have to rebuild loader after full update to apply the patch? Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 11, 2022 Author Share #3265 Posted May 11, 2022 1 minute ago, cferra said: So I’d just have to rebuild loader after full update to apply the patch? If your loader was created before April 10 then it might worth the try Quote Link to comment Share on other sites More sharing options...
cferra Posted May 11, 2022 Share #3266 Posted May 11, 2022 Just now, pocopico said: If your loader was created before April 10 then it might worth the try Yeah, it was created when 7.1 final was released Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted May 11, 2022 Share #3267 Posted May 11, 2022 3 minutes ago, pocopico said: if smartctl --all /dev/sdxx reports serial number correctly it should work. I think it depends on the HBA whether is reports smart data or not. There is no way to use smartctl in junior's ttyd, what should I do? Quote Link to comment Share on other sites More sharing options...
Chedda Posted May 11, 2022 Share #3268 Posted May 11, 2022 (edited) 16 minutes ago, Peter Suh said: Set user_config.json as below maxdisks = 36 internalportcfg = 0xfffffffff As far as I know, DSM 7.0.1 and DS3622XS doesn't use this command anymore. Something has to be done with the sata port mapping and what not. I updated my user_config.json to include your settings. No dice. Running ESXi and I have the drives as an RDM to the VM. I was able to get drives to show up for the current RAID setup to have drives on 2 different SATA controllers. The first set of drives 2-8 on SATA 1 and the second set 14-16 on SATA 2. The boot is still on SATA 0 Edited May 11, 2022 by Chedda accidentally a number Quote Link to comment Share on other sites More sharing options...
cferra Posted May 11, 2022 Share #3269 Posted May 11, 2022 19 minutes ago, pocopico said: If your loader was created before April 10 then it might worth the try What’s the least disruptive way to do a loader update while keeping my configs?? Quote Link to comment Share on other sites More sharing options...
flyride Posted May 11, 2022 Share #3270 Posted May 11, 2022 (edited) 2 hours ago, pocopico said: Hi, it should work after you edit the /var/run/model.dtb and do a rescan from the GUI I was able to find a solution with the devices all on the first virtual SATA controller. I'll post sample dts files when I can get the second controller working. EDIT: ESXi virtual sata controllers have 30 slots. After the first one, subsequent controller ports that are continuously enumerated in sequence in tinycore, which render them inaddressable. The DTS should be edited so so that all virtual SATA ports are referenced from zero (MOD 30 will handle all possibilities). I assume that this dts/dtb approach to port management means that partial population of a SATA controller will mean non-populated ports are non-functional. Therefore, a rebuild of the loader would be required if disks were added, correct? Edited May 11, 2022 by flyride 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 11, 2022 Author Share #3271 Posted May 11, 2022 1 hour ago, flyride said: I was able to find a solution with the devices all on the first virtual SATA controller. I'll post sample dts files when I can get the second controller working. I assume that this dts/dtb approach to port management means that partial population of a SATA controller will mean non-populated ports are non-functional. Therefore, a rebuild of the loader would be required if disks were added, correct? Well you can always predict - at least on VMware - what the next data disks ports will be. So i guess you can pre-populate the dts/dtb file with them. I think you can also duplicate internal_slotX block to add more disks and we did that with someone but dont remember when and with who. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted May 11, 2022 Share #3272 Posted May 11, 2022 2 hours ago, pocopico said: if smartctl --all /dev/sdxx reports serial number correctly it should work. I think it depends on the HBA whether is reports smart data or not. @pocopico It was possible to use smartctl in DS918+ DSM boot state. So I checked it like below The SN of the HDD is accurately displayed. So what is the problem? Spoiler root@r8152_test:~# smartctl --all /dev/sde smartctl 6.5 (build date Oct 7 2021) [x86_64-linux-4.4.180+] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Black (AF) Device Model: WDC WD5000BPKT-22PK4T0 Serial Number: WD-WX61A81J1357 LU WWN Device Id: 5 0014ee 2b0fb5cfc Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu May 12 01:44:33 2022 KST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9180) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 93) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 192 166 021 Pre-fail Always - 1366 4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4085 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5722 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1221 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 168 193 Load_Cycle_Count 0x0032 181 181 000 Old_age Always - 58155 194 Temperature_Celsius 0x0022 114 099 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5452 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 11, 2022 Author Share #3273 Posted May 11, 2022 1 hour ago, cferra said: What’s the least disruptive way to do a loader update while keeping my configs?? Well, keep a backup of your old loader partitions with ./rploader.sh backuploader now this will create backup files of your partitions in /mnt/<tcrppart>/backup/<backupdate> and you can always restore later with ./rploader.sh restoreloader now I would of course create a new USB loader to be safe. Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 11, 2022 Author Share #3274 Posted May 11, 2022 4 minutes ago, Peter Suh said: @pocopico It was possible to use smartctl in DS918+ DSM boot state. So I checked it like below The SN of the HDD is accurately displayed. So what is the problem? smartctl log (Hide contents) root@r8152_test:~# smartctl --all /dev/sde smartctl 6.5 (build date Oct 7 2021) [x86_64-linux-4.4.180+] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Black (AF) Device Model: WDC WD5000BPKT-22PK4T0 Serial Number: WD-WX61A81J1357 LU WWN Device Id: 5 0014ee 2b0fb5cfc Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu May 12 01:44:33 2022 KST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9180) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 93) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 192 166 021 Pre-fail Always - 1366 4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4085 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5722 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1221 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 168 193 Load_Cycle_Count 0x0032 181 181 000 Old_age Always - 58155 194 Temperature_Celsius 0x0022 114 099 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5452 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. can you also please pass a dmesg |grep -i smart ? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted May 11, 2022 Share #3275 Posted May 11, 2022 9 minutes ago, pocopico said: can you also please pass a dmesg |grep -i smart ? Here's the log. Spoiler admin2@r8152_test:/$ dmesg |grep -i smart [ 4.365145] <redpill/smart_shim.c:1032> Registering SMART emulator shim [ 4.365146] <redpill/smart_shim.c:1042> SCSI driver exists - installing canary [ 4.367584] <redpill/smart_shim.c:1054> Successfully registered SMART emulator shim [ 12.451076] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 12.588402] scsi 4:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 21.756675] <redpill/smart_shim.c:934> sd_ioctl_canary triggered for first ioctl() [ 21.764255] <redpill/smart_shim.c:862> Rerouting sd_fops->ioctl<ffffffff81661b98>=sd_ioctl+0x0/0x230<ffffffff8140dad0> to sd_ioctl_smart_shim+0x0/0x90 [redpill]<ffffffffa000a4d0> [ 21.873361] <redpill/smart_shim.c:971> Canary finished - routing to sd_fops->ioctl = sd_ioctl_smart_shim+0x0/0x90 [redpill]<ffffffffa000a4d0> [ 34.540822] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.540823] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.562929] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.562931] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.594586] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.594587] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.594903] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.594904] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.599583] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.599584] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.602196] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.602197] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.602456] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.602456] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.603580] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.603581] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.609885] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.609886] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.613092] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.613093] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.620171] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.620172] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.620508] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.620509] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.626380] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 34.666906] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.666907] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.677084] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 34.677330] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 34.678738] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 34.685789] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 34.691587] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 34.715505] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 34.715506] <redpill/smart_shim.c:390> Generating fake SMART values [ 34.715512] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd1 [ 34.715512] <redpill/smart_shim.c:457> Generating fake SMART thresholds [ 34.716658] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.716659] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.716664] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 34.716664] <redpill/smart_shim.c:390> Generating fake SMART values [ 34.717026] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 34.717538] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd5 [ 34.717539] <redpill/smart_shim.c:516> Generating fake WIN_SMART log=0 entries [ 34.717607] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 34.717608] <redpill/smart_shim.c:390> Generating fake SMART values [ 34.719204] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.719205] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.720550] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.720551] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.721315] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.721316] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.727112] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.727113] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.728103] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.728104] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.768695] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.768696] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.933975] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.933975] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.950733] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.950734] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.964781] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 34.964782] <redpill/smart_shim.c:390> Generating fake SMART values [ 34.964785] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd1 [ 34.964786] <redpill/smart_shim.c:457> Generating fake SMART thresholds [ 34.964865] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.964866] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.964869] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 34.964870] <redpill/smart_shim.c:390> Generating fake SMART values [ 34.965417] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd5 [ 34.965418] <redpill/smart_shim.c:516> Generating fake WIN_SMART log=0 entries [ 34.965493] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 34.965493] <redpill/smart_shim.c:390> Generating fake SMART values [ 34.966146] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.966147] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.966815] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.966815] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.967244] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.967245] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 34.969436] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 34.969437] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 35.944932] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 35.944933] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 35.944937] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 35.944937] <redpill/smart_shim.c:390> Generating fake SMART values [ 35.949234] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 35.949235] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 35.949580] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 35.959817] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 35.960974] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 35.961736] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 35.964513] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 35.965738] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 35.972218] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 36.004322] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 36.024034] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 36.024035] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 36.029552] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 36.032350] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 36.055586] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 36.055588] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 36.077485] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 36.077485] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 36.077488] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 36.077489] <redpill/smart_shim.c:390> Generating fake SMART values [ 36.078101] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 36.078102] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 38.529577] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 39.945803] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 39.951035] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 39.965727] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 39.975223] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 39.987417] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.038566] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.050731] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.051445] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 40.095687] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 40.098456] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 40.098458] <redpill/smart_shim.c:390> Generating fake SMART values [ 40.098463] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd1 [ 40.098464] <redpill/smart_shim.c:457> Generating fake SMART thresholds [ 40.098697] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.098698] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.098701] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 40.098702] <redpill/smart_shim.c:390> Generating fake SMART values [ 40.099456] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd5 [ 40.099457] <redpill/smart_shim.c:516> Generating fake WIN_SMART log=0 entries [ 40.099523] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 40.099523] <redpill/smart_shim.c:390> Generating fake SMART values [ 40.100082] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.100083] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.100873] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.100874] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.101397] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.101398] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.116373] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.116375] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.123760] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.123760] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.141402] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 40.141404] <redpill/smart_shim.c:390> Generating fake SMART values [ 40.141409] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd1 [ 40.141410] <redpill/smart_shim.c:457> Generating fake SMART thresholds [ 40.141667] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.141667] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.141671] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 40.141672] <redpill/smart_shim.c:390> Generating fake SMART values [ 40.141856] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 40.141857] <redpill/smart_shim.c:390> Generating fake SMART values [ 40.141862] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd1 [ 40.141863] <redpill/smart_shim.c:457> Generating fake SMART thresholds [ 40.142510] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.142511] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.142514] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 40.142514] <redpill/smart_shim.c:390> Generating fake SMART values [ 40.142569] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd5 [ 40.142570] <redpill/smart_shim.c:516> Generating fake WIN_SMART log=0 entries [ 40.142654] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 40.142654] <redpill/smart_shim.c:390> Generating fake SMART values [ 40.143297] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.143298] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.143338] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.143339] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.144111] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.144112] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.144679] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.144680] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.168706] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.168707] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.187572] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 40.187573] <redpill/smart_shim.c:390> Generating fake SMART values [ 40.187578] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd1 [ 40.187578] <redpill/smart_shim.c:457> Generating fake SMART thresholds [ 40.187665] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.187666] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.187669] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd0 [ 40.187669] <redpill/smart_shim.c:390> Generating fake SMART values [ 40.189500] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 40.189501] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 40.629066] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 40.637794] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 40.646533] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 41.652537] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.652988] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.652989] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 41.654219] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.654220] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 41.654845] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd8 [ 41.654846] <redpill/smart_shim.c:656> Attempted ATA_SMART_ENABLE modification! [ 41.655810] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.655811] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 41.682033] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.682033] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 41.682149] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.682149] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 41.695720] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.695721] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 41.697007] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.697007] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 41.698173] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.698173] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 41.698365] <redpill/smart_shim.c:646> Got SMART *command* - looking for feature=0xd8 [ 41.698365] <redpill/smart_shim.c:656> Attempted ATA_SMART_ENABLE modification! [ 41.699104] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.699105] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 41.757124] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.757125] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 41.757231] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 41.757232] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 41.772230] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 41.774577] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 41.775507] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 41.780484] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 41.791522] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 41.967378] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 44.987830] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 45.000009] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 45.051672] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 45.062228] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 45.062461] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 45.062462] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 45.090988] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 45.098446] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 45.110617] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 45.173774] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 45.182409] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 45.194615] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 45.256009] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 45.268189] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 45.277395] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 45.525752] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 45.533751] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 45.545927] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 45.559446] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 45.571615] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 46.522590] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop [ 46.532089] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 46.544265] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY [ 46.551688] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something [ 46.563872] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.