Dvalin21 Posted January 20, 2022 Share #426 Posted January 20, 2022 17 hours ago, djvas335 said: did all of you try auto satamap detection ? Yes, with and without embedded data enabled. However I don't have any drives on the embedded but just the sas/Sata raid card. Which when running it without embedded enabled it doesn't see the card. 8 hours ago, killseeker said: I think this extension might help? https://github.com/pocopico/rp-ext/blob/main/aacraid/rpext-index.json "name": "aacraid", "description": "Adds Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec Advanced Raid Products, HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver Support" I'll give that a try, and see what happens. Quote Link to comment Share on other sites More sharing options...
Bose321 Posted January 20, 2022 Share #427 Posted January 20, 2022 Tried to set the boot sata drive on VMWare Workstation to 0:0 and 3 other test drives on 1:0 and 1:1 and 1:2 Entered 03 and 0000 on the settings json file. That's what I understood I would need, since it's two controllers I guess? And 0 and 3 drives, and both start at index 00. Quote Link to comment Share on other sites More sharing options...
NoFate Posted January 20, 2022 Share #428 Posted January 20, 2022 (edited) Guys, was follwing the steps as descibed here : (have a hp Gen 8 ESXI) on last step : sudo ./rploader.sh build bromolow-7.0.1-42218 all looks fine, and then putty just closes?? is that normal? also when i do a file transfer of that pat file. its just impossible? look at the speed? is that a modified .pat file anyway? or can i just download it from synology website? also if i do a reboot, all files are gone, and find.synology.com isnt fidning any stations? what am i doing wrong? Edited January 20, 2022 by NoFate Quote Link to comment Share on other sites More sharing options...
sojab0on Posted January 20, 2022 Share #429 Posted January 20, 2022 What is wrong with the VMDK version, i constantly get errors with the rploader commands on jq on multiple lines Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 20, 2022 Share #430 Posted January 20, 2022 16 minutes ago, NoFate said: Guys, was follwing the steps as descibed here : (have a hp Gen 8 ESXI) on last step : sudo ./rploader.sh build bromolow-7.0.1-42218 all looks fine, and then putty just closes?? is that normal? also when i do a file transfer of that pat file. its just impossible? look at the speed? is that a modified .pat file anyway? or can i just download it from synology website? also if i do a reboot, all files are gone, and find.synology.com isnt fidning any stations? what am i doing wrong? Is not normal. How many ram did you give the virtual machine? It is not a special file. You can download it from Synology. If you don’t want start again then make sure to backup the build you made. Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 20, 2022 Share #431 Posted January 20, 2022 1 minute ago, sojab0on said: What is wrong with the VMDK version, i constantly get errors with the rploader commands on jq on multiple lines Didn’t test the vmdk. But the image file certainly works. Quote Link to comment Share on other sites More sharing options...
NoFate Posted January 20, 2022 Share #432 Posted January 20, 2022 1 minute ago, Unregistrado said: Is not normal. How many ram did you give the virtual machine? It is not a special file. You can download it from Synology. If you don’t want start again then make sure to backup the build you made. ow, is that maybe it, think it was only 1 GB ram default Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 20, 2022 Share #433 Posted January 20, 2022 (edited) 2 minutes ago, NoFate said: ow, is that maybe it, think it was only 1 GB ram default I think I read somewhere that that is certainly not enough. Give it as much as you would give your Synology. Edited January 20, 2022 by Unregistrado Quote Link to comment Share on other sites More sharing options...
NoFate Posted January 20, 2022 Share #434 Posted January 20, 2022 Just now, Unregistrado said: I think I read somewhere that that is certainly not enough. ok, gonna try with 4 again Quote Link to comment Share on other sites More sharing options...
sojab0on Posted January 20, 2022 Share #435 Posted January 20, 2022 mine has 4 cores and 4GB but the tc boot fine only commands keep spitting me back to sudo ./rploader.sh build bromolow-7.0.1-42218 static ./rploader.sh: line 439: jq: command not found ./rploader.sh: line 423: jq: command not found ./rploader.sh: line 423: jq: command not found ./rploader.sh: line 877: jq: command not found ./rploader.sh: line 878: jq: command not found ./rploader.sh: line 879: jq: command not found ./rploader.sh: line 880: jq: command not found ./rploader.sh: line 881: jq: command not found ./rploader.sh: line 882: jq: command not found ./rploader.sh: line 883: jq: command not found ./rploader.sh: line 884: jq: command not found ./rploader.sh: line 885: jq: command not found ./rploader.sh: line 886: jq: command not found ./rploader.sh: line 887: jq: command not found ./rploader.sh: line 888: jq: command not found ./rploader.sh: line 888: jq: command not found ./rploader.sh: line 889: jq: command not found ./rploader.sh: line 889: jq: command not found ./rploader.sh: line 890: jq: command not found ./rploader.sh: line 890: jq: command not found ./rploader.sh: line 891: jq: command not found Error : Platform not found ./rploader.sh: line 416: jq: command not found ./rploader.sh: line 416: jq: command not found rploader.sh Version : 0.4.4 ---------------------------------------------------------------------------------------- Usage: ./rploader.sh <action> <platform version> <static or compile module> [extension manager arguments] Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, satamap, mountshare - build: Build the 💊 RedPill LKM and update the loader image for the specified platform version and update current loader. - ext: Manage extensions, options go after platform (add/force_add/info/remove/update/cleanup/auto) example: rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json or for auto detect use rploader.sh ext apollolake-7.0.1-42218 auto - download: Download redpill sources only - clean: Removes all cached files and starts over - update: Checks github repo for latest version of rploader - listmods: Tries to figure out required extensions - serialgen: Generates a serial number and mac address for the following platforms DS3615xs DS3617xs DS916+ DS918+ DS920+ DVA3219 DVA3221 - identifyusb: Tries to identify your loader usb stick VID:PID and updates the user_config.json file - satamap: Tries to identify your SataPortMap and DiskIdxMap values and updates the user_config.json file - backup: Backup and make changes /home/tc changed permanent to your loader disk - mountshare: Mounts a remote CIFS working directory Available platform versions: ---------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------- Check global_settings.json for settings. I tried even versions in the global file still same serialgen gens serial but cant edit the user file looks like somehow the image has issues with the scripts Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 20, 2022 Share #436 Posted January 20, 2022 1 minute ago, sojab0on said: mine has 4 cores and 4GB but the tc boot fine only commands keep spitting me back to sudo ./rploader.sh build bromolow-7.0.1-42218 static ./rploader.sh: line 439: jq: command not found ./rploader.sh: line 423: jq: command not found ./rploader.sh: line 423: jq: command not found ./rploader.sh: line 877: jq: command not found ./rploader.sh: line 878: jq: command not found ./rploader.sh: line 879: jq: command not found ./rploader.sh: line 880: jq: command not found ./rploader.sh: line 881: jq: command not found ./rploader.sh: line 882: jq: command not found ./rploader.sh: line 883: jq: command not found ./rploader.sh: line 884: jq: command not found ./rploader.sh: line 885: jq: command not found ./rploader.sh: line 886: jq: command not found ./rploader.sh: line 887: jq: command not found ./rploader.sh: line 888: jq: command not found ./rploader.sh: line 888: jq: command not found ./rploader.sh: line 889: jq: command not found ./rploader.sh: line 889: jq: command not found ./rploader.sh: line 890: jq: command not found ./rploader.sh: line 890: jq: command not found ./rploader.sh: line 891: jq: command not found Error : Platform not found ./rploader.sh: line 416: jq: command not found ./rploader.sh: line 416: jq: command not found rploader.sh Version : 0.4.4 ---------------------------------------------------------------------------------------- Usage: ./rploader.sh <action> <platform version> <static or compile module> [extension manager arguments] Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, satamap, mountshare - build: Build the 💊 RedPill LKM and update the loader image for the specified platform version and update current loader. - ext: Manage extensions, options go after platform (add/force_add/info/remove/update/cleanup/auto) example: rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json or for auto detect use rploader.sh ext apollolake-7.0.1-42218 auto - download: Download redpill sources only - clean: Removes all cached files and starts over - update: Checks github repo for latest version of rploader - listmods: Tries to figure out required extensions - serialgen: Generates a serial number and mac address for the following platforms DS3615xs DS3617xs DS916+ DS918+ DS920+ DVA3219 DVA3221 - identifyusb: Tries to identify your loader usb stick VID:PID and updates the user_config.json file - satamap: Tries to identify your SataPortMap and DiskIdxMap values and updates the user_config.json file - backup: Backup and make changes /home/tc changed permanent to your loader disk - mountshare: Mounts a remote CIFS working directory Available platform versions: ---------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------- Check global_settings.json for settings. I tried even versions in the global file still same serialgen gens serial but cant edit the user file looks like somehow the image has issues with the scripts Can you try to convert the image file? And test with those? Quote Link to comment Share on other sites More sharing options...
sojab0on Posted January 20, 2022 Share #437 Posted January 20, 2022 the file is a convert from the base one from the git repo i will try to fix the files trough a vmware player on my laptop Quote Link to comment Share on other sites More sharing options...
NoFate Posted January 20, 2022 Share #438 Posted January 20, 2022 5 minutes ago, Unregistrado said: I think I read somewhere that that is certainly not enough. Thats it, 1 or 2 GB was to low, 4 GB is needed, thnx a lot!! Quote Link to comment Share on other sites More sharing options...
NoFate Posted January 20, 2022 Share #439 Posted January 20, 2022 (edited) ok, its booting up, but still cant find it on network, does the mac in esxi needs to be the same as in that json file? EDIT: gave it the same mac, did a rebuid, but still cant find it Edited January 20, 2022 by NoFate Quote Link to comment Share on other sites More sharing options...
sojab0on Posted January 20, 2022 Share #440 Posted January 20, 2022 7 minutes ago, NoFate said: ok, its booting up, but still cant find it on network, does the mac in esxi needs to be the same as in that json file? EDIT: gave it the same mac, did a rebuid, but still cant find it Yes it does, the bootloader searches foor the mac address on boot Quote Link to comment Share on other sites More sharing options...
NoFate Posted January 20, 2022 Share #441 Posted January 20, 2022 yeah, i changed it, did again this command : ./rploader.sh build bromolow-7.0.1-42218 reboot, but still not finding it Quote Link to comment Share on other sites More sharing options...
sojab0on Posted January 20, 2022 Share #442 Posted January 20, 2022 1 minute ago, NoFate said: yeah, i changed it, did again this command : ./rploader.sh build bromolow-7.0.1-42218 reboot, but still not finding it Boot up for DSM can take some time did you also setup the stamaping and serial in de config Quote Link to comment Share on other sites More sharing options...
NoFate Posted January 20, 2022 Share #443 Posted January 20, 2022 (edited) 1 minute ago, sojab0on said: Boot up for DSM can take some time did you also setup the stamaping and serial in de config this command? ./rploader.sh satamap now yeah, i did, the usb not also this command for sn : ./rploader.sh serialgen DS3615xs now Edited January 20, 2022 by NoFate Quote Link to comment Share on other sites More sharing options...
sojab0on Posted January 20, 2022 Share #444 Posted January 20, 2022 Just now, NoFate said: this command? ./rploader.sh satamap now yeah, i did, the usb not USB is not needed if you dont use usb drive if its baremetal then you need to to generate the vid and pid for the usb and put them in the user config as well Quote Link to comment Share on other sites More sharing options...
NoFate Posted January 20, 2022 Share #445 Posted January 20, 2022 no, dont need USB indeed, its esxi gonna try again from scratch Quote Link to comment Share on other sites More sharing options...
NoFate Posted January 20, 2022 Share #446 Posted January 20, 2022 dont get it, did al the steps, when i reboot, i see below, looks fine normally but i cant ping it anymore, never comes online, find.synology.com isnt finding anything steps: ./rploader.sh serialgen DS3615xs now changed mac manually afterwards ./rploader.sh satamap now ./rploader.sh backup now ./rploader.sh build bromolow-7.0.1-42218 then i see below Quote Link to comment Share on other sites More sharing options...
sojab0on Posted January 20, 2022 Share #447 Posted January 20, 2022 did your ESXI have a gui, mine does not even get to a gui , if i go to a vmware player it does I let v2v convert the disk from a clean image vmdk to esx image but still no dice on gui boot Quote Link to comment Share on other sites More sharing options...
Kaneske Posted January 20, 2022 Share #448 Posted January 20, 2022 (edited) Use the Esxi internal converting Tool as mentioned here. Works good, Boot via BIOS Mode at SATA 0:0 @NoFate thy change Ethernet to non passthrough. Maybe create image ne with this setting. Then test. Mostly wrong driver, KP at early Boot. Edited January 20, 2022 by Kaneske Quote Link to comment Share on other sites More sharing options...
NoFate Posted January 20, 2022 Share #449 Posted January 20, 2022 3 minutes ago, Kaneske said: Use the Esxi internal converting Tool as mentioned here. Works good, Boot via BIOS Mode at SATA 0:0 @NoFate thy change Ethernet to non passthrough. Maybe create image ne with this setting. Then test. Mostly wrong driver, KP at early Boot. Hey, i'm a step further now, i gave it more cpu, and i also changed the MAC on the esxi , with the one from the file, now i can find it on the network, but when i upload the .pat file, i get this :s Quote Link to comment Share on other sites More sharing options...
Kaneske Posted January 20, 2022 Share #450 Posted January 20, 2022 @NoFate check SataPortConfig and DiskIdxMap… Are you booting with SATA Shim? Chosen in the Picker… Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.