Trantor Posted August 10, 2013 Author Share #26 Posted August 10, 2013 Yesterday I tried all USB ports (MB USB2,USB3, USB3 PCI CARD, CARD Reader with USB3) ... on my SYNOLOGY & they do not work. These is also the reason, why UPS is not recognized . You mean nothing append when you plug an usb device ? I tested USB on two computer with external drive, and it's detected (mount as esata) and available on dsm. Printers are detected. Keyboard is working. (no UPS for testing ) Hi Trantor! Thank you for noting my msg, though I am afraid I was talkig about different drivers - aacraid for SAS/SATA RAID Adapters rather than HBAs, or I completely misunderstand something? PS: would enabling CONFIG_DEVPTS_MULTIPLE_INSTANCES allow virtual port creation to communicate with synobios? If so please enable too. My bad forgot to build AACRAID driver, will be included in next update. No idea with CONFIG_DEVPTS_MULTIPLE_INSTANCES. Trantor, I just ordered a 24bay Supermicro system from eBay. http://www.ebay.com/itm/171078773991?ss ... 1497.l2649 http://www.supermicro.com/aplus/motherb ... 8dme-2.cfm The Supermicro H8DME-2 motherboard in this system contains the following. - nVidia MCP55 Pro SATA2 3.0Gbps Controller - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller Additionally, it also comes with 3x Supermicro AOC-SAT2-MV8 SATA cards (Marvell Hercules-2 Rev. C0 SATA host controller) http://www.supermicro.com/products/acce ... t2-mv8.cfm 1) Does the current release contain the SATA and Ethernet drivers for the nVidia MCP55Pro? 2) Does it contain the driver to support Marvell Hercules host controller? Thanks. I'll be testing it out once I get the hardware. I'm just curious about the compatibility prior to receive the hardware. Nvidia network is supported as the marvell/nvidia sata controller. Quote Link to comment Share on other sites More sharing options...
kennyb Posted August 10, 2013 Share #27 Posted August 10, 2013 Can I use this repack to install it on 2 x 2TB disks in mirror using vmware workstation or player? I would like to install XPenology only on these 2 disks. Please look at my post http://xpenology.com/forum/viewtopic.php?f=2&t=1041 for more info. Thx! Quote Link to comment Share on other sites More sharing options...
Trantor Posted August 10, 2013 Author Share #28 Posted August 10, 2013 Can I use this repack to install it on 2 x 2TB disks in mirror using vmware workstation or player? I would like to install XPenology only on these 2 disks. Please look at my post http://xpenology.com/forum/viewtopic.php?f=2&t=1041 for more info. Thx! Yes you can use this repack with VMware, but ESXi is recommended instead of workstation (this esxi thread for more infos). Quote Link to comment Share on other sites More sharing options...
interested Posted August 10, 2013 Share #29 Posted August 10, 2013 (edited) You mean nothing append when you plug an usb device ? YES ... I see only my 6 disc > https://dl.dropboxusercontent.com/u/34829066/Synology/Slike/HDD.jpg I did try 4 different USB FLASH & UPS on this ports: - USB2 & USB3 on motherboard - USB3 & SD card reader, wich is connected to USB3 on MB (inside) - PCIex card with USB3 but, nothing works by me ... with 4.1-2668_1.2 & up, this stuff works. Edited August 14, 2013 by Guest Quote Link to comment Share on other sites More sharing options...
kennyb Posted August 10, 2013 Share #30 Posted August 10, 2013 Can I use this repack to install it on 2 x 2TB disks in mirror using vmware workstation or player? I would like to install XPenology only on these 2 disks. Please look at my post http://xpenology.com/forum/viewtopic.php?f=2&t=1041 for more info. Thx! Yes you can use this repack with VMware, but ESXi is recommended instead of workstation (this esxi thread for more infos). My intention was to run this on esxi but the problem is I cannot install esxi on my hardware because to the onboard network intel wg-i217v adapter.. I tried to add the drivers for this adapter with esxi customizer but no luck.. Anyone already succeeded in this? Quote Link to comment Share on other sites More sharing options...
tsygam Posted August 10, 2013 Share #31 Posted August 10, 2013 My bad forgot to build AACRAID driver, will be included in next update. No idea with CONFIG_DEVPTS_MULTIPLE_INSTANCES. Thanks! just please take the latest from Adaptec's site http://www.adaptec.com/en-us/speed/raid/aac/linux/aacraid-linux-src-1_2_1-30200_tgz.htm As to CONFIG_DEVPTS_MULTIPLE_INSTANCES=y seems to be needed to create another virtual port, link it to one synobios is using and try cheating it https://www.kernel.org/doc/Documentation/filesystems/devpts.txt. Please enable this for experimenting. Quote Link to comment Share on other sites More sharing options...
Trantor Posted August 11, 2013 Author Share #32 Posted August 11, 2013 My bad forgot to build AACRAID driver, will be included in next update. No idea with CONFIG_DEVPTS_MULTIPLE_INSTANCES. Thanks! just please take the latest from Adaptec's site http://www.adaptec.com/en-us/speed/raid/aac/linux/aacraid-linux-src-1_2_1-30200_tgz.htm As to CONFIG_DEVPTS_MULTIPLE_INSTANCES=y seems to be needed to create another virtual port, link it to one synobios is using and try cheating it https://www.kernel.org/doc/Documentation/filesystems/devpts.txt. Please enable this for experimenting. Just build latest aacraid driver from adaptec's site. aacraid driver also support IBM ServeRAID adapter so I temporally disable the buil-in driver (ips). (FrankGNL please give feedback about this) Download this and replace rd and zImage on your flash drive : http://xpenology.trantor.be/aacraid-v1.2.1_rd_zImage.7z @interested : Did the USB work with the orignial 4.2-302 build from odie ? PS : I leave home tomorrow for vacation for a week, so no update until august 20th ^^ Quote Link to comment Share on other sites More sharing options...
interested Posted August 11, 2013 Share #33 Posted August 11, 2013 (edited) @interested : Did the USB work with the orignial 4.2-302 build from odie ? Answer is NO. Becouse of this, I did buy one new D-Link 2-Port USB 3.0 PCI Express Card (DUB-1310), but it does not work. I dont know what is inside your ver. 4.1-2668(1.2-1.3a), but it works. Please tell me how can I help you to resolve this ... deficiency ??? Edited August 14, 2013 by Guest Quote Link to comment Share on other sites More sharing options...
Trantor Posted August 11, 2013 Author Share #34 Posted August 11, 2013 @interested : Did the USB work with the orignial 4.2-302 build from odie ? Answer is NO. Becouse of this, I did buy one new D-Link 2-Port USB 3.0 PCI Express Card (DUB-1310), but it does not work. I dont know what is inside your ver. 3.1-2668(1.2-1.3a), but it works. Please tell me how can I help you to resolve this ... deficiency ??? Did any 4.2 version have USB working on your hardware ? Quote Link to comment Share on other sites More sharing options...
interested Posted August 11, 2013 Share #35 Posted August 11, 2013 Did any 4.2 version have USB working on your hardware ? as I said, NO. Quote Link to comment Share on other sites More sharing options...
Trantor Posted August 11, 2013 Author Share #36 Posted August 11, 2013 I dont know what is inside your ver. 3.1-2668(1.2-1.3a), but it works. Nothing that's not in the 4.2. When I ask about other 4.2 build I mean like RS3413xs+ DSM 4.2-3211 x86 or DS3612xs_4.2-3211_x64. To be clear, as you said when you plug for example USB sick nothing append ? even on the xpenology screen ? Try command : tail -f /var/log/message and plug something in USB ports. (some input should appear) Does the plugged device is even powered ? What's about a standard USB keyboard ? Quote Link to comment Share on other sites More sharing options...
interested Posted August 11, 2013 Share #37 Posted August 11, 2013 I am almost sure, that I did tested all this version, but without any luck. Yes, when I plug in USB Stick nothing append, not even Keyboard on the xpenology screen. I did put in USB and type this command > tail -f /var/log/messages SYNOLOGY> tail -f /var/log/messages Aug 11 20:27:36 ssd: smtp.c (381) Failed to connect to smtp.gmail.com:587 Aug 11 20:27:55 ssd: smtp.c (381) Failed to connect to smtp.gmail.com:587 Aug 11 20:33:20 ssrotated: smtp.c (381) Failed to connect to smtp.gmail.com:587 Aug 11 20:33:26 ssrotated: smtp.c (381) Failed to connect to smtp.gmail.com:587 Aug 11 20:37:46 ssd: smtp.c (381) Failed to connect to smtp.gmail.com:587 Aug 11 20:38:08 ssd: smtp.c (381) Failed to connect to smtp.gmail.com:587 Aug 11 20:38:12 ssd: smtp.c (381) Failed to connect to smtp.gmail.com:587 Aug 11 20:38:18 ssd: smtp.c (381) Failed to connect to smtp.gmail.com:587 Aug 11 20:38:23 ssd: smtp.c (381) Failed to connect to smtp.gmail.com:587 Aug 11 20:38:40 ssd: smtp.c (381) Failed to connect to smtp.gmail.com:587 Plugged device flashes for half a second, but that's all. This is the screen after reboot > https://dl.dropboxusercontent.com/u/34829066/Synology/Slike/screen%20after%20reboot.JPG Here are two logs, if it helps: - messages > https://dl.dropboxusercontent.com/u/34829066/Synology/Datoteke/Logs/messages - dmesg.boot > https://dl.dropboxusercontent.com/u/34829066/Synology/Datoteke/Logs/dmesg.boot TNX. Quote Link to comment Share on other sites More sharing options...
person65278 Posted August 13, 2013 Share #38 Posted August 13, 2013 Ok went log hunting and right before the DSM crashes, by crash I mean no external access but the computer is still powered up. it prints this Aug 12 06:04:35 inetd[7583]: accept (for printer) : Invalid argument and all of the lines will be exactly the same all 1301 of them.... There is no printer hooked up nor has there ever been. Quote Link to comment Share on other sites More sharing options...
FrankGNL Posted August 13, 2013 Share #39 Posted August 13, 2013 Does two VM disks, are they IDE or SCSI? Does spindown work for you? For me installation is working, but when i shutdown the VM, attach my LSi raidcontroller, turn it on, it will auto power off the vm after 1 minute. yes both disk are IDE and spin down works, auto power off happened to me when there was no support for the card. Is your card in IT Mode? Does spin down works even if you create a volume on the disks, why i ask, i would like to buy a LSI SAS 2008 and flash it to IT mode. Thanks in advance Regards Frank Quote Link to comment Share on other sites More sharing options...
shcjosh Posted August 14, 2013 Share #40 Posted August 14, 2013 thanks for sharing! i just successfully install this version of xpenology into my old computer directly(not vbox or vmware), without out any problem. here is my hardware specs for ppl wanna install. CPU: AMD Athlon 64 X2 4000+ MB: MIS 7309 NIC: TP-Link Gigabit PCI Express TG-3468 with realtek chip HDD: sata2 device *2 boot with USB drive and everything goes smoothly ! Quote Link to comment Share on other sites More sharing options...
kennyb Posted August 14, 2013 Share #41 Posted August 14, 2013 Hi, I'm trying to install this repack in ESX but still no luck.. I did the following: - Converted the .img to .vmdk with starwind (IDE, pre-allocated) - Mapped my 2TB disk as RDM as in the idiot's guide for install on esx - followed the idiot's guide to create VM, added the boot image as an IDE drive, and the RDM as a Paravirtual SCSI drive - boot the VM - With synology assistant search, right click and install - during install the device will get a reboot - after this reboot i get the grub error 22 - shut down VM - deleted the disk with boot vmdk - reuploaded the boot vmdk - assigned it to the VM - boot the VM - the installation completed after the countdown (think 600 sec) - tried to browse to the IP I gave during install - got the error it can not connect to the diskstation - assistant finds the DS but says configuration lost What am I doing wrong here? My pc is directly connected to the esx server. Pc is also connected to a wireless router, different subnet but this should not matter.. Plz help! Thx Quote Link to comment Share on other sites More sharing options...
zearea51 Posted August 15, 2013 Share #42 Posted August 15, 2013 works great ^^ well done Trantor Quote Link to comment Share on other sites More sharing options...
jolife Posted August 15, 2013 Share #43 Posted August 15, 2013 Working very well on my Tranquil SQA-5H (a 5 disk WHS box). Many thanks to the guys who do this. Les Quote Link to comment Share on other sites More sharing options...
Kanedo Posted August 16, 2013 Share #44 Posted August 16, 2013 Trantor. I got my new server. NVidia NIC and SATA works with this build. However the Marvell SATA cards do not. Whenever I have the Marvell SATA cards installed, the boot-up process would not complete. I would get this error continuously during bootup Screen Shot 2013-08-15 at 9.08.00 PM.png[/attachment] Quote Link to comment Share on other sites More sharing options...
Kanedo Posted August 20, 2013 Share #45 Posted August 20, 2013 As an workaround to my Marvell problem, I can boot if i append grub's kernel line with libata.force=pio4 However, this yields terrible performance. This seems rather bizarre since this card is suppose to support SATA2. Trantor, any ideas? Quote Link to comment Share on other sites More sharing options...
colombodk Posted August 20, 2013 Share #46 Posted August 20, 2013 Trantor. I got my new server. NVidia NIC and SATA works with this build. However the Marvell SATA cards do not. Whenever I have the Marvell SATA cards installed, the boot-up process would not complete. I would get this error continuously during bootup Screen Shot 2013-08-15 at 9.08.00 PM.png[/attachment] I have to report the same problem is present with the Rocketraid 1742/1740 PCI-based controllers, also based on a Marvell SATA-controller, specifically the 88SX6042-chip. The problem is *not* present on a generic PCIe-based controller with the Marvell 88SX7042-chip, nor on the Promise TX4310 PCI-based controller that has a Marvell 88SX5041. So clearly one of the Marvell-modules is broken...? I seem to recall that I previously had the Rocketraid 1742 working correctly, with an early build of QNOLOGY from XVortex on the QNAP-site... Edit: Screendumps of boot up screen: http://peecee.dk/upload/view/419198 http://peecee.dk/upload/view/419199 http://peecee.dk/upload/view/419200 http://peecee.dk/upload/view/419201 Quote Link to comment Share on other sites More sharing options...
T-REX-XP Posted August 21, 2013 Share #47 Posted August 21, 2013 Hi! Thanks for your great job! If possible, Please add the driver for ACPI and LCDPROC. Power Button (motherboard c60m1-i) does not power off PC.(( Thanks. Quote Link to comment Share on other sites More sharing options...
Trantor Posted August 21, 2013 Author Share #48 Posted August 21, 2013 @Kanedo and @colombodk : The sata_mv driver is built-in the offical syno kernel and is modified by synology. I tried to build it as module but the machine boot and shutdown itself afert 1min.... I assume you test my 4.1 build and have the same issue ? If someone have enought knowledge to maybe patch sata_mv.c @T-REX-XP : Can you please give me more informations about ACPI driver to include and LCDPROC ? @tsygam and @FrankGNL : Did the latest aacraid driver solved your issue ? @everyone ^^ : Can you confirm me that the issue with external usb detected as esata is present in the odie's 4.2-3202 build ? Quote Link to comment Share on other sites More sharing options...
yold Posted August 21, 2013 Share #49 Posted August 21, 2013 Can you confirm me that the issue with external usb detected as esata is present in the odie's 4.2-3202 build ? I confirm ! Quote Link to comment Share on other sites More sharing options...
2cam Posted August 21, 2013 Share #50 Posted August 21, 2013 hi Can you confirm me that the issue with external usb detected as esata is present in the odie's 4.2-3202 build ? I confirm this issue. PS: Thank's for your great job. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.