nemesis122 Posted December 6, 2016 Share #26 Posted December 6, 2016 thank you Michael Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted December 6, 2016 Share #27 Posted December 6, 2016 Hi Thank you So in this case this also working with DSM 5967.1 or i need en other script ? With this script the server Fan will go down to 8% ? BR Michael Quote Link to comment Share on other sites More sharing options...
kamuta Posted December 6, 2016 Share #28 Posted December 6, 2016 This script is for DSM 6.0. In my case fan is spinning at 13% speed after this script has been deployed and it is more or less the same before AMS was activated. HP Gen8 microserver sense temp from multiple sensors thus activating AMS may not necessarily slow down the fan. Make sure that you have latest Bios in your server - This has resolved high speed fan speeds in most cases. Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted December 6, 2016 Share #29 Posted December 6, 2016 Hi Ok thank you for your time and explanation. At the moment i use en old ILO 1.32 with special setting from Homeserver show and my fan spins only from 6 to 13 %. so i will gone with this old ILO it working great. I have only one issue with this server and this is the bios reset wenn you restart the server and this cames from XPE 5967.1 not ILO solution was use USer default in the HP Bios. But the reset is in the ILO Log still present. BR Michael Quote Link to comment Share on other sites More sharing options...
kamuta Posted December 6, 2016 Share #30 Posted December 6, 2016 I meant BIOS - System ROM of the main board: J06 11/02/2015 The best practice for Gen8 Microserver is: - acquire iLO advanced license (you can get trial code from HP but it's fairly cheep on eBay so just buy it) - download latest Service Pack for ProLiant - 2016.10.0 at the moment - launch iLO Integrated Remote Console and mount SPP iso as CD-ROM/DVD virtual drive - reboot the server and boot from previously mounted SPP iso virtual drive - deploy all firmware updates Make sure that when you make changes to the Bios it's saved as user default options: Choose "System Default Options" - "User Default Options" - "Save User Defaults" => this makes the actual settings to the new default settings. I have noticed that after upgrading from 5.2 to 6.0 Bios reset does not occur. Quote Link to comment Share on other sites More sharing options...
JBark Posted December 7, 2016 Share #31 Posted December 7, 2016 Thanks guys for putting out an updated version for DSM 6. I've been meaning to get around to it, but haven't bothered updating since phpVirtualBox hasn't been updated yet. I'll update the OP here sometime soon with the links to this new version. Quote Link to comment Share on other sites More sharing options...
Balrog Posted December 15, 2016 Share #32 Posted December 15, 2016 @JBark: Thank you very much! I just installed an Dell H200 HBA (flashed to IT-Mode) and installed it into the Hp Microserver Gen8: With your tar.gz-archive and installing as you described even all harddisks connected to the H200 will be shown with their current status at the iLO-Webpage (for now only tested under DSM 5.2-5967 Update 1)!!! Awesome! Quote Link to comment Share on other sites More sharing options...
mrinner Posted December 25, 2016 Share #33 Posted December 25, 2016 Thanks guys! Works perfect with DSM 6 on Gen8. Quote Link to comment Share on other sites More sharing options...
AntUst Posted December 30, 2016 Share #34 Posted December 30, 2016 Hello! amsHelper does not work with DSM 6.0.2-8451 Update 7 Quote Link to comment Share on other sites More sharing options...
ema Posted December 30, 2016 Share #35 Posted December 30, 2016 Hello!amsHelper does not work with DSM 6.0.2-8451 Update 7 Hi! I just updated my test gen8 to update 7 to check what you said, but I can confirm that everything works as with previous versions. So check in previous post what's the correct way to use the driver (hpilo.ko) and the bin (amsHelper). ciao ema Quote Link to comment Share on other sites More sharing options...
AntUst Posted January 9, 2017 Share #36 Posted January 9, 2017 Hello!amsHelper does not work with DSM 6.0.2-8451 Update 7 Hi! I just updated my test gen8 to update 7 to check what you said, but I can confirm that everything works as with previous versions. So check in previous post what's the correct way to use the driver (hpilo.ko) and the bin (amsHelper). ciao ema Quote Link to comment Share on other sites More sharing options...
ema Posted January 9, 2017 Share #37 Posted January 9, 2017 ash-4.3# ps ax | grep amsHelper 14287 ? S 0:42 /sbin/amsHelper -I0 -M1 5 14 16 18 23 99 ash-4.3# lsmod | grep hpilo hpilo 6734 2 image share Ciao ema Quote Link to comment Share on other sites More sharing options...
AntUst Posted January 9, 2017 Share #38 Posted January 9, 2017 Helped restart iLo. Thanks to the help Quote Link to comment Share on other sites More sharing options...
bchuter Posted January 14, 2017 Share #39 Posted January 14, 2017 Thanks very much. The guide worked perfectly to get AMS working. I live in South Africa so the temps here are normally around 30deg and up in summer. Today is one of the colder days with the ambient temp at 24deg. My fan speed is at 14% The fan speeds did not really change much after adding in the AMS.....but im glad i have the extra info now in ILO. Quote Link to comment Share on other sites More sharing options...
ema Posted February 28, 2017 Share #40 Posted February 28, 2017 Hi guys... Here's a version working on DSM 6.1 amsHelper >> no change, it's the same hpilo.ko >> recompiled for DSM 6.1 https://mega.nz/#!R8dUhDJb!dyYEVSsrWSohPfU5O7Uxo-GisuMKZPZbG4HbeiIeHk0 Ciao ema 2 Quote Link to comment Share on other sites More sharing options...
Aigor Posted March 1, 2017 Share #41 Posted March 1, 2017 Hi guys...Here's a version working on DSM 6.1 amsHelper >> no change, it's the same hpilo.ko >> recompiled for DSM 6.1 https://mega.nz/#!R8dUhDJb!dyYEVSsrWSohPfU5O7Uxo-GisuMKZPZbG4HbeiIeHk0 Ciao ema Do you have 6.1 kernel sources? Quote Link to comment Share on other sites More sharing options...
ema Posted March 2, 2017 Share #42 Posted March 2, 2017 No... ciao ema Quote Link to comment Share on other sites More sharing options...
Rusty Posted March 3, 2017 Share #43 Posted March 3, 2017 Works like a charm, and I can see all four drives. Quote Link to comment Share on other sites More sharing options...
Bosk Posted March 11, 2017 Share #44 Posted March 11, 2017 Hi guys... I try to intall hp-ams on 6.1 But it looks like when this script start works on bootup xpenology freeze. I have access to files by share and can try to login, but after entering password nothing happened/freeze ( by ssh and web portal). Can I check that this scripts works without reboot? For example enter this lines in ssh? insmod /lib/modules/hpilo.ko /sbin/amsHelper -I0 -M1,5,14,16,18,23,99 I don't see any info for storages in iLo Quote Link to comment Share on other sites More sharing options...
vejta66 Posted April 10, 2017 Share #45 Posted April 10, 2017 Great job! there is a way to have it for 5.2? the version im runnning know "see" only a disk. thk for the answer and ur time (grazie e ciao) cya Quote Link to comment Share on other sites More sharing options...
cuspess Posted April 11, 2017 Share #46 Posted April 11, 2017 I am currently on esxi 6.0 and xpenology as a vm within it. I too suffer the high fan speed issue where ambient temp is 27c and fan spins no lower than 35% when idle. None of those reported success with the modded hp-ams mentioned they are on esxi 6.0 or baremetal, I assume they are on baremetal. Can someone advise will this hp-ams mod work for esxi 6.0? If it is esxi 6.0 that I am on, does it matter which modded version I choose? thanks Quote Link to comment Share on other sites More sharing options...
v02max Posted April 29, 2017 Share #47 Posted April 29, 2017 Great job! there is a way to have it for 5.2? the version im runnning know "see" only a disk. thk for the answer and ur time (grazie e ciao) cya Firstly thanks to jBark and ema I think, to get all working on 5.2 (if not already explained somewhere I missed) I've done the following: My ilo verson is 2.50 Sep 23 2016 Download both the 5 and 6 builds, use the amsHelper from the 6 version and replace the hphelper as per below in the startup script https://drive.google.com/file/d/0B_s9dH ... J3QVk/view https://mega.nz/#!gt0HTCJZ!PeXq-qutvb6m ... _HcCVTd-6Y Modify the startup script to use amsHelper and use the 5 version of hpilo Run at start Ctrl-C your test run to stop it, then create a startup script. vi /usr/local/etc/rc.d/S99HP-AMS.sh Code: Select all #!/bin/sh modprobe hpilo /sbin/amsHelper -I0 -M1,5,14,16,18,23,99 chmod +x /usr/local/etc/rc.d/S99HP-AMS.sh /usr/local/etc/rc.d/S99HP-AMS.sh ps | grep amsHelper Should show it is running, and iLO should still report correctly and for me it shows all 4 drives Quote Link to comment Share on other sites More sharing options...
vejta66 Posted April 30, 2017 Share #48 Posted April 30, 2017 Great job! there is a way to have it for 5.2? the version im runnning know "see" only a disk. thk for the answer and ur time (grazie e ciao) cya Firstly thanks to jBark and ema I think, to get all working on 5.2 (if not already explained somewhere I missed) I've done the following: My ilo verson is 2.50 Sep 23 2016 ........ Should show it is running, and iLO should still report correctly and for me it shows all 4 drives Hi, thk you for your kind answer & thk to all ppl that make it possible like ema, jbark. I will try it asap! EDIT: It works! Thk again. Quote Link to comment Share on other sites More sharing options...
Rusty Posted May 3, 2017 Share #49 Posted May 3, 2017 I am currently on esxi 6.0 and xpenology as a vm within it. I too suffer the high fan speed issue where ambient temp is 27c and fan spins no lower than 35% when idle. None of those reported success with the modded hp-ams mentioned they are on esxi 6.0 or baremetal, I assume they are on baremetal. Can someone advise will this hp-ams mod work for esxi 6.0? If it is esxi 6.0 that I am on, does it matter which modded version I choose? thanks You need AMS for ESXi, not XPEnology. If you used the HPE custom ESXi ISO, you should already have it. If not grab the HPE offline bundle and install that. Quote Link to comment Share on other sites More sharing options...
iulian_2007 Posted June 30, 2017 Share #50 Posted June 30, 2017 I'm using 6.1 on Microserver gen8 (bare metal). I've installed the module and the task, I can see the hard drives in ILO but I cannot see 04-HD Max sensor. What can I do to see that sensor in ILO? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.