Showing results for 'hdd hibernation'.

Hibernation doesn’t work

TheRealMaN_ replied to Musyanon's topic in Packages & DSM Features

On my system the disk sleeps and never wakes up on its own only after I set a sleep time manually via terminal command with root user: hdparm -S 60 /dev/sd{X} I've tested different time values and came to the conclusion that disk can only sleep when a time is no more than 5 minutes. If its greater than that - the disk would never enter the hibernation state. You also can force it to hibernate immediately using command: hdparm -y /dev/sd{X} apart from that I've only set "Hibernation" option in "Control Panel" -> "Hardware & Power" -> "HDD Hibernation" to 10 minutes and also ran script from https://github.com/AlexFromChaos/synology_hibernation_fixer

March 25
15 replies
- 6.2.3
- 6.x.x
- (and 3 more)
  Tagged with:
  - 6.2.3
  - 6.x.x
  - 6.x
  - qnap
  - dsm

DSM 7.1-42661 Update 2 / HDD Hibernation Issues

TheRealMaN_ replied to Stefano's topic in General Post-Installation Questions/Discussions (non-hardware specific)

On my system the disk sleeps and never wakes up on its own only after I set a sleep time manually via terminal command with root user: hdparm -S 60 /dev/sd{X} I've tested different time values and came to the conclusion that disk can only sleep when a time is no more than 5 minutes. If its greater than that - the disk would never enter the hibernation state. You also can force it to hibernate immediately using command: hdparm -y /dev/sd{X} apart from that I've only set "Hibernation" option in "Control Panel" -> "Energy Saving" to 10 minutes and also ran script from https://github.com/AlexFromChaos/synology_hibernation_fixer

DVA1622 on DMS7.1 flood logs with syno_localinstall_dsm.sh

dj_nsk replied to hmarius1's topic in Developer Discussion Room

In the Arc Loader try "hibernation" addon

Arc Loader. Еще один загрузчик?

dj_nsk replied to Pooh's topic in Програмное обеспечение

там появился интересный аддон hibernation "Disable IO logs to fix disk hibernation." - возможно, он всё решает. У себя не проверял, у меня там и торренты постоянно крутятся, и ещё что-то - всё равно не будут спать. Да и для нормальных дисков не так это и страшно. Как обычно - более вредны частые пуски и остановы...

i915 driver for sa6400

Peter Suh replied to MoetaYuko's topic in Developer Discussion Room

[ 0.091203] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.091509] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.091814] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.092119] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.092425] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.092730] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.093035] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.093341] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.093646] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.093952] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.094289] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.094649] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.094977] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.095319] ACPI: IRQ0 used by override. [ 0.095522] ACPI: IRQ9 used by override. [ 0.095725] Using ACPI (MADT) for SMP configuration information [ 0.096031] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.096298] TSC deadline timer available [ 0.096502] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.096768] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.097165] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.097556] PM: hibernation: Registered nosave memory: [mem 0x39f99000-0x3a898fff] [ 0.097947] PM: hibernation: Registered nosave memory: [mem 0x434af000-0x452fefff] [ 0.098338] PM: hibernation: Registered nosave memory: [mem 0x452ff000-0x45b2efff] [ 0.098729] PM: hibernation: Registered nosave memory: [mem 0x45b2f000-0x45bfefff] [ 0.099120] PM: hibernation: Registered nosave memory: [mem 0x45c00000-0x49ffffff] [ 0.099510] PM: hibernation: Registered nosave memory: [mem 0x4a000000-0x4a1fffff] [ 0.099901] PM: hibernation: Registered nosave memory: [mem 0x4a200000-0x4a3fffff] [ 0.100291] PM: hibernation: Registered nosave memory: [mem 0x4a400000-0x4affffff] [ 0.100682] PM: hibernation: Registered nosave memory: [mem 0x4b000000-0x503fffff] [ 0.101073] PM: hibernation: Registered nosave memory: [mem 0x50400000-0xfe00ffff] [ 0.101463] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff] [ 0.101855] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed1ffff] [ 0.102248] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] [ 0.102638] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfeffffff] [ 0.103029] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.103420] [mem 0x50400000-0xfe00ffff] available for PCI devices [ 0.103737] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.106862] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:8 nr_node_ids:1 [ 0.107380] percpu: Embedded 53 pages/cpu s176664 r8192 d32232 u262144 [ 0.107723] pcpu-alloc: s176664 r8192 d32232 u262144 alloc=1*2097152 [ 0.108052] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.108286] Built 1 zonelists, mobility grouping on. Total pages: 4074138 [ 0.108645] Policy zone: Normal [ 0.108808] Kernel command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.111059] Synology Hardware Version: SA6400 [ 0.111292] Internal netif num: 2 [ 0.111481] Mac2: 94DE806D73B4 [ 0.111644] Mac1: 001132C7F4BE [ 0.111803] Serial Number: 1980PDN028952 [ 0.112012] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.112716] Vender format version: 2 [ 0.113400] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.114044] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.114507] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.139885] Memory: 15942936K/16555320K available (10248K kernel code, 4829K rwdata, 5800K rodata, 1344K init, 10984K bss, 612128K reserved, 0K cma-reserved) [ 0.140645] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.140987] ftrace: allocating 32589 entries in 128 pages [ 0.148606] ftrace: allocated 128 pages with 1 groups [ 0.148928] rcu: Hierarchical RCU implementation. [ 0.149174] rcu: RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=8. [ 0.149515] Rude variant of Tasks RCU enabled. [ 0.149749] Tracing variant of Tasks RCU enabled. [ 0.149996] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.150391] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.153104] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16 [ 0.153862] Console: colour dummy device 80x25 [ 0.154101] ACPI: Core revision 20200925 [ 0.154670] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.155235] APIC: Switch to symmetric I/O mode setup [ 0.155492] DMAR: Host address width 39 [ 0.155690] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.155966] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e [ 0.156438] DMAR: DRHD base: 0x000000fed84000 flags: 0x0 [ 0.156715] DMAR: dmar1: reg_base_addr fed84000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.157124] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.157438] DMAR: dmar2: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.157847] DMAR: RMRR base: 0x0000004c000000 end: 0x000000503fffff [ 0.158171] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 2 [ 0.158536] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.158814] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.160997] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.161283] x2apic enabled [ 0.161484] Switched APIC routing to cluster x2apic. [ 0.166436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.171205] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns [ 0.171785] Calibrating delay loop (skipped), value calculated using timer frequency.. 4838.40 BogoMIPS (lpj=2419200) [ 0.172785] pid_max: default: 32768 minimum: 301 [ 0.173040] LSM: Security Framework initializing [ 0.173299] AppArmor: AppArmor initialized [ 0.173542] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.173805] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.174362] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.174815] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.175148] process: using mwait in idle threads [ 0.175390] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.175785] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.176092] Speculative Store Bypass: Vulnerable [ 0.176439] Freeing SMP alternatives memory: 32K [ 0.176839] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz (family: 0x6, model: 0x8c, stepping: 0x1) [ 0.177434] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.177786] ... version: 5 [ 0.177992] ... bit width: 48 [ 0.178203] ... generic registers: 8 [ 0.178410] ... value mask: 0000ffffffffffff [ 0.178684] ... max period: 00007fffffffffff [ 0.178785] ... fixed-purpose events: 4 [ 0.178992] ... event mask: 0001000f000000ff [ 0.179323] rcu: Hierarchical SRCU implementation. [ 0.179942] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.180348] smp: Bringing up secondary CPUs ... [ 0.180622] x86: Booting SMP configuration: [ 0.180786] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.186163] smp: Brought up 1 node, 8 CPUs [ 0.186293] smpboot: Max logical packages: 1 [ 0.186786] smpboot: Total of 8 processors activated (38707.20 BogoMIPS) [ 0.188006] devtmpfs: initialized [ 0.188042] random: get_random_u32 called from bucket_table_alloc.isra.0+0x6e/0x160 with crng_init=0 [ 0.188050] PM: Registering ACPI NVS region [mem 0x452ff000-0x45b2efff] (8585216 bytes) [ 0.189284] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.189789] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.190182] pinctrl core: initialized pinctrl subsystem [ 0.190569] NET: Registered protocol family 16 [ 0.190835] audit: initializing netlink subsys (disabled) [ 0.191120] audit: type=2000 audit(1700704115.031:1): state=initialized audit_enabled=0 res=1 [ 0.191120] thermal_sys: Registered thermal governor 'step_wise' [ 0.191265] cpuidle: using governor ladder [ 0.191999] cpuidle: using governor menu [ 0.192214] ACPI: bus type PCI registered [ 0.192214] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.192828] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.193309] PCI: not using MMCONFIG [ 0.193492] PCI: Using configuration type 1 for base access [ 0.194802] Kprobes globally optimized [ 0.195006] ACPI: Added _OSI(Module Device) [ 0.195018] ACPI: Added _OSI(Processor Device) [ 0.195018] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.195032] ACPI: Added _OSI(Processor Aggregator Device) [ 0.195311] ACPI: Added _OSI(Linux-Dell-Video) [ 0.195541] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.195785] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.236734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.237786] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.238228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.238607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.238785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.239225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.239604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.240785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.241226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.241604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.241785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.242226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.242605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.243785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.244228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.244607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.244785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.245226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.245605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.246785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.247225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.247604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.247785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.248226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.248604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.249785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.250225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.250604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.250785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.251226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.251690] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.252785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.253225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.253604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.253785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.254226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.254604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.255785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.256225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.256604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.256785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.257226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.257650] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.258785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.259225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.259603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.259785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.260226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.260604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.260785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.261225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.261604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.262785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.263226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.263605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.263785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.264225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.264603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.265785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.266225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.266604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.266785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.267227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.267604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.268785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.269225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.269607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.269785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.270226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.270607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.271785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.272225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.272687] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.272785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.273227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.273605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.274785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.275225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.275687] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.275785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.276226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.276603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.277785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.278226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.278689] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.278785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.279226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.279604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.280785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.281225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.281605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.281785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.282226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.282605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.283785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.284226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.284605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.284785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.285226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.285603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.286785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.287226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.287605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.287785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.288227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.288606] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.288785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.289226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.289604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.290785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.291226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.291604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.291785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.292225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.292604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.293785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.294226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.294604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.294785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.295228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.296179] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.I2C0.TPD0], AE_NOT_FOUND (20200925/dswload2-162) [ 0.296741] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.297785] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.298175] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.I2C0.TPL1], AE_NOT_FOUND (20200925/dswload2-162) [ 0.298738] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.298785] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.299590] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0], AE_NOT_FOUND (20200925/dswload2-162) [ 0.299785] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.300205] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.300788] ACPI: 19 ACPI AML tables successfully acquired and loaded [ 0.301697] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20200925/dspkginit-438) [ 0.302787] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20200925/dspkginit-438) [ 0.303394] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20200925/dspkginit-438) [ 0.303793] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20200925/dspkginit-438) [ 0.309803] ACPI: Dynamic OEM Table Load: [ 0.310026] ACPI: SSDT 0xFFFF88810104B000 0001C6 (v02 PmRef Cpu0Psd 00003000 INTL 20160422) [ 0.311210] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.313331] ACPI: Dynamic OEM Table Load: [ 0.313551] ACPI: SSDT 0xFFFF888101542C00 000386 (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.314721] ACPI: Dynamic OEM Table Load: [ 0.314789] ACPI: SSDT 0xFFFF888100CCD000 0005C3 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.316203] ACPI: Dynamic OEM Table Load: [ 0.316422] ACPI: SSDT 0xFFFF888101543000 00028B (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.317806] ACPI: Dynamic OEM Table Load: [ 0.318028] ACPI: SSDT 0xFFFF8881010E4000 0008E7 (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.319482] ACPI: Dynamic OEM Table Load: [ 0.319697] ACPI: SSDT 0xFFFF888100CCE800 00048A (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.321753] ACPI: Dynamic OEM Table Load: [ 0.321789] ACPI: SSDT 0xFFFF888100CCF000 0004D4 (v02 PmRef ApPsd 00003000 INTL 20160422) [ 0.323193] ACPI: Dynamic OEM Table Load: [ 0.323413] ACPI: SSDT 0xFFFF888100CCF800 00048A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.327502] ACPI: EC: EC started [ 0.327678] ACPI: EC: interrupt blocked [ 0.328164] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.328428] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.328785] ACPI: Interpreter enabled [ 0.328986] ACPI: (supports S0 S4 S5) [ 0.329179] ACPI: Using IOAPIC for interrupt routing [ 0.329462] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.332261] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in ACPI motherboard resources [ 0.332728] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.335432] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.338715] ACPI: Power Resource [BTPR] (on) [ 0.339406] ACPI: Power Resource [PAUD] (on) [ 0.345820] ACPI: Power Resource [V0PR] (on) [ 0.346129] ACPI: Power Resource [V1PR] (on) [ 0.346427] ACPI: Power Resource [V2PR] (on) [ 0.348250] ACPI: Power Resource [PXTC] (on) [ 0.348666] ACPI: Power Resource [PTPL] (on) [ 0.349149] ACPI: Power Resource [PXTC] (on) [ 0.349814] ACPI: Power Resource [PXTC] (on) [ 0.351989] ACPI: Power Resource [WRST] (on) [ 0.357430] ACPI: Power Resource [TBT0] (on) [ 0.357791] ACPI: Power Resource [TBT1] (on) [ 0.357816] ACPI: Power Resource [D3C] (on) [ 0.473844] ACPI: Power Resource [FN00] (off) [ 0.474231] ACPI: Power Resource [FN01] (off) [ 0.474804] ACPI: Power Resource [FN02] (off) [ 0.474892] ACPI: Power Resource [FN03] (off) [ 0.475242] ACPI: Power Resource [FN04] (off) [ 0.476805] ACPI: Power Resource [PIN] (off) [ 0.477213] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) [ 0.477578] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.480612] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 0.484019] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] [ 0.486076] PCI host bridge to bus 0000:00 [ 0.486293] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.486651] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.486785] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.487181] pci_bus 0000:00: root bus resource [mem 0x50400000-0xbfffffff window] [ 0.487567] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.487785] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.488095] pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000 [ 0.489794] pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000 [ 0.489794] pci 0000:00:02.0: reg 0x10: [mem 0x601c000000-0x601cffffff 64bit] [ 0.489794] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.490182] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.490483] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.490809] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit] [ 0.491167] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs) [ 0.491673] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref] [ 0.492785] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs) [ 0.493927] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000 [ 0.494257] pci 0000:00:04.0: reg 0x10: [mem 0x601d140000-0x601d15ffff 64bit] [ 0.495309] pci 0000:00:06.0: [8086:9a09] type 01 class 0x060400 [ 0.495688] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.496454] pci 0000:00:07.0: [8086:9a23] type 01 class 0x060400 [ 0.497384] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.497724] pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid [ 0.497911] pci 0000:00:0d.0: [8086:9a13] type 00 class 0x0c0330 [ 0.498239] pci 0000:00:0d.0: reg 0x10: [mem 0x601d160000-0x601d16ffff 64bit] [ 0.498666] pci 0000:00:0d.0: PME# supported from D3hot D3cold [ 0.499417] pci 0000:00:0d.2: [8086:9a1b] type 00 class 0x0c0340 [ 0.499745] pci 0000:00:0d.2: reg 0x10: [mem 0x601d100000-0x601d13ffff 64bit] [ 0.500792] pci 0000:00:0d.2: reg 0x18: [mem 0x601d181000-0x601d181fff 64bit] [ 0.501203] pci 0000:00:0d.2: supports D1 D2 [ 0.501427] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.502413] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330 [ 0.502746] pci 0000:00:14.0: reg 0x10: [mem 0x5e500000-0x5e50ffff 64bit] [ 0.502873] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.503819] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000 [ 0.504152] pci 0000:00:14.2: reg 0x10: [mem 0x601d178000-0x601d17bfff 64bit] [ 0.504535] pci 0000:00:14.2: reg 0x18: [mem 0x601d180000-0x601d180fff 64bit] [ 0.505453] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000 [ 0.505807] pci 0000:00:14.3: reg 0x10: [mem 0x601d174000-0x601d177fff 64bit] [ 0.506330] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.507343] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000 [ 0.507723] pci 0000:00:15.0: reg 0x10: [mem 0x4010000000-0x4010000fff 64bit] [ 0.508805] pci 0000:00:15.3: [8086:a0eb] type 00 class 0x0c8000 [ 0.508898] pci 0000:00:15.3: reg 0x10: [mem 0x4010001000-0x4010001fff 64bit] [ 0.510065] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000 [ 0.510405] pci 0000:00:16.0: reg 0x10: [mem 0x601d17d000-0x601d17dfff 64bit] [ 0.510861] pci 0000:00:16.0: PME# supported from D3hot [ 0.511789] pci 0000:00:17.0: [8086:a0d3] type 00 class 0x010601 [ 0.512121] pci 0000:00:17.0: reg 0x10: [mem 0x5e510000-0x5e511fff] [ 0.512453] pci 0000:00:17.0: reg 0x14: [mem 0x5e514000-0x5e5140ff] [ 0.512787] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087] [ 0.513083] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b] [ 0.513380] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] [ 0.513675] pci 0000:00:17.0: reg 0x24: [mem 0x5e513000-0x5e5137ff] [ 0.514833] pci 0000:00:17.0: PME# supported from D3hot [ 0.515797] pci 0000:00:1d.0: [8086:a0b0] type 01 class 0x060400 [ 0.515884] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.516859] pci 0000:00:1d.1: [8086:a0b1] type 01 class 0x060400 [ 0.517275] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold [ 0.518280] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100 [ 0.519318] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100 [ 0.519669] pci 0000:00:1f.3: reg 0x10: [mem 0x601d170000-0x601d173fff 64bit] [ 0.519839] pci 0000:00:1f.3: reg 0x20: [mem 0x601d000000-0x601d0fffff 64bit] [ 0.520313] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.521268] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500 [ 0.521605] pci 0000:00:1f.4: reg 0x10: [mem 0x601d17c000-0x601d17c0ff 64bit] [ 0.521814] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.522788] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000 [ 0.523803] pci 0000:00:1f.5: reg 0x10: [mem 0x50400000-0x50400fff] [ 0.524813] pci 0000:01:00.0: [144d:a809] type 00 class 0x010802 [ 0.525141] pci 0000:01:00.0: reg 0x10: [mem 0x5e400000-0x5e403fff 64bit] [ 0.525685] pci 0000:00:06.0: PCI bridge to [bus 01] [ 0.525787] pci 0000:00:06.0: bridge window [mem 0x5e400000-0x5e4fffff] [ 0.526170] pci 0000:00:07.0: PCI bridge to [bus 02-2b] [ 0.526446] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.526762] pci 0000:00:07.0: bridge window [mem 0x52000000-0x5e1fffff] [ 0.526789] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.527272] pci 0000:2c:00.0: [10ec:8168] type 00 class 0x020000 [ 0.527604] pci 0000:2c:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.527815] pci 0000:2c:00.0: reg 0x18: [mem 0x5e304000-0x5e304fff 64bit] [ 0.528183] pci 0000:2c:00.0: reg 0x20: [mem 0x5e300000-0x5e303fff 64bit] [ 0.528655] pci 0000:2c:00.0: supports D1 D2 [ 0.528785] pci 0000:2c:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.529797] pci 0000:00:1d.0: PCI bridge to [bus 2c] [ 0.529797] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.529797] pci 0000:00:1d.0: bridge window [mem 0x5e300000-0x5e3fffff] [ 0.531816] pci 0000:2d:00.0: [1217:8621] type 00 class 0x080501 [ 0.532152] pci 0000:2d:00.0: reg 0x10: [mem 0x5e201000-0x5e201fff] [ 0.532484] pci 0000:2d:00.0: reg 0x14: [mem 0x5e200000-0x5e2007ff] [ 0.533925] pci 0000:2d:00.0: PME# supported from D3hot D3cold [ 0.537839] pci 0000:00:1d.1: PCI bridge to [bus 2d] [ 0.538105] pci 0000:00:1d.1: bridge window [mem 0x5e200000-0x5e2fffff] [ 0.541824] ACPI: EC: interrupt unblocked [ 0.541824] ACPI: EC: event unblocked [ 0.541990] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.542251] ACPI: EC: GPE=0x6e [ 0.542409] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.542773] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events [ 0.543842] iommu: Default domain type: Passthrough (set via kernel command line) [ 0.544238] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.544238] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.544788] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.545084] vgaarb: loaded [ 0.545259] SCSI subsystem initialized [ 0.545793] libata version 3.00 loaded. [ 0.546007] pps_core: LinuxPPS API ver. 1 registered [ 0.546007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.546261] PTP clock support registered [ 0.546813] EDAC MC: Ver: 3.0.0 [ 0.546958] PCI: Using ACPI for IRQ routing [ 0.567450] PCI: pci_cache_line_size set to 64 bytes [ 0.567947] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.568259] e820: reserve RAM buffer [mem 0x39f99000-0x3bffffff] [ 0.568571] e820: reserve RAM buffer [mem 0x434af000-0x43ffffff] [ 0.568785] e820: reserve RAM buffer [mem 0x45c00000-0x47ffffff] [ 0.569097] e820: reserve RAM buffer [mem 0x4afc00000-0x4afffffff] [ 0.569797] clocksource: Switched to clocksource tsc-early [ 0.576870] VFS: Disk quotas dquot_6.6.0 [ 0.577090] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.577494] AppArmor: AppArmor Filesystem Enabled [ 0.577766] pnp: PnP ACPI init [ 0.578061] system 00:00: [io 0x0700-0x073f] has been reserved [ 0.578371] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.578684] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.579065] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.579462] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.579776] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.580187] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.580936] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] [ 0.581600] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 0.581949] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.582293] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.582637] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.583002] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.583364] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.583725] system 00:04: [mem 0xfe0b0000-0xfe0b0fff] has been reserved [ 0.584072] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.584420] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.585326] system 00:05: [io 0x1800-0x18fe] could not be reserved [ 0.585656] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.586020] system 00:05: [mem 0xfe04c000-0xfe04ffff] has been reserved [ 0.586366] system 00:05: [mem 0xfe050000-0xfe0affff] has been reserved [ 0.586709] system 00:05: [mem 0xfe0d0000-0xfe0fffff] has been reserved [ 0.587055] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.587399] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.587743] system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved [ 0.588089] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 0.588433] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.588781] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.589298] system 00:06: [io 0x2000-0x20fe] has been reserved [ 0.589611] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.590080] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.590557] pnp: PnP ACPI: found 8 devices [ 0.596053] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.596547] NET: Registered protocol family 2 [ 0.596933] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.598344] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.598817] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.599328] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.599800] TCP: Hash tables configured (established 131072 bind 65536) [ 0.600162] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.600536] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.600953] NET: Registered protocol family 1 [ 0.601192] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref] [ 0.601616] pci 0000:00:02.0: BAR 7: assigned [mem 0x4011000000-0x4017ffffff 64bit] [ 0.602014] pci 0000:00:06.0: PCI bridge to [bus 01] [ 0.602272] pci 0000:00:06.0: bridge window [mem 0x5e400000-0x5e4fffff] [ 0.602625] pci 0000:00:07.0: PCI bridge to [bus 02-2b] [ 0.602897] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.603215] pci 0000:00:07.0: bridge window [mem 0x52000000-0x5e1fffff] [ 0.603567] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.603990] pci 0000:00:1d.0: PCI bridge to [bus 2c] [ 0.604248] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.604565] pci 0000:00:1d.0: bridge window [mem 0x5e300000-0x5e3fffff] [ 0.604923] pci 0000:00:1d.1: PCI bridge to [bus 2d] [ 0.605184] pci 0000:00:1d.1: bridge window [mem 0x5e200000-0x5e2fffff] [ 0.605540] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.605861] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.606181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.606536] pci_bus 0000:00: resource 7 [mem 0x50400000-0xbfffffff window] [ 0.606893] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] [ 0.607265] pci_bus 0000:01: resource 1 [mem 0x5e400000-0x5e4fffff] [ 0.607589] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.607878] pci_bus 0000:02: resource 1 [mem 0x52000000-0x5e1fffff] [ 0.608201] pci_bus 0000:02: resource 2 [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.608593] pci_bus 0000:2c: resource 0 [io 0x3000-0x3fff] [ 0.608881] pci_bus 0000:2c: resource 1 [mem 0x5e300000-0x5e3fffff] [ 0.609208] pci_bus 0000:2d: resource 1 [mem 0x5e200000-0x5e2fffff] [ 0.609624] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.610406] PCI: CLS 64 bytes, default 64 [ 1.445477] Trying to unpack rootfs image as initramfs... [ 1.464216] Freeing initrd memory: 73260K [ 1.464454] DMAR: No ATSR found [ 1.464652] DMAR: dmar1: Using Queued invalidation [ 1.464907] DMAR: dmar0: Using Queued invalidation [ 1.465155] DMAR: Translation was enabled for dmar0 but we are not in kdump mode [ 1.465537] DMAR: dmar2: Using Queued invalidation [ 1.465925] pci 0000:00:00.0: Adding to iommu group 0 [ 1.466193] pci 0000:00:02.0: Adding to iommu group 1 [ 1.466459] pci 0000:00:04.0: Adding to iommu group 2 [ 1.466727] pci 0000:00:06.0: Adding to iommu group 3 [ 1.467004] pci 0000:00:07.0: Adding to iommu group 4 [ 1.467273] pci 0000:00:0d.0: Adding to iommu group 5 [ 1.467545] pci 0000:00:0d.2: Adding to iommu group 5 [ 1.467816] pci 0000:00:14.0: Adding to iommu group 6 [ 1.468088] pci 0000:00:14.2: Adding to iommu group 6 [ 1.468353] pci 0000:00:14.3: Adding to iommu group 7 [ 1.468622] pci 0000:00:15.0: Adding to iommu group 8 [ 1.468896] pci 0000:00:15.3: Adding to iommu group 8 [ 1.469164] pci 0000:00:16.0: Adding to iommu group 9 [ 1.469430] pci 0000:00:17.0: Adding to iommu group 10 [ 1.469701] pci 0000:00:1d.0: Adding to iommu group 11 [ 1.469975] pci 0000:00:1d.1: Adding to iommu group 12 [ 1.470251] pci 0000:00:1f.0: Adding to iommu group 13 [ 1.470526] pci 0000:00:1f.3: Adding to iommu group 13 [ 1.470798] pci 0000:00:1f.4: Adding to iommu group 13 [ 1.471068] pci 0000:00:1f.5: Adding to iommu group 13 [ 1.471338] pci 0000:01:00.0: Adding to iommu group 14 [ 1.471609] pci 0000:2c:00.0: Adding to iommu group 15 [ 1.471882] pci 0000:2d:00.0: Adding to iommu group 16 [ 1.472172] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.472507] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.472842] software IO TLB: mapped [mem 0x000000003f4af000-0x00000000434af000] (64MB) [ 1.473297] resource sanity check: requesting [mem 0xfedc0000-0xfedcdfff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] [ 1.473937] caller tgl_uncore_imc_freerunning_init_box+0xa2/0xe0 mapping multiple BARs [ 1.474455] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns [ 1.474993] clocksource: Switched to clocksource tsc [ 1.476123] Initialise system trusted keyrings [ 1.478759] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 1.480602] Key type asymmetric registered [ 1.480839] Asymmetric key parser 'x509' registered [ 1.481128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.481533] io scheduler mq-deadline registered [ 1.481782] io scheduler kyber registered [ 1.482039] io scheduler bfq registered [ 1.482664] pcieport 0000:00:06.0: PME: Signaling with IRQ 123 [ 1.483221] pcieport 0000:00:07.0: PME: Signaling with IRQ 124 [ 1.483560] pcieport 0000:00:07.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.486550] pcieport 0000:00:1d.0: PME: Signaling with IRQ 125 [ 1.487161] pcieport 0000:00:1d.1: PME: Signaling with IRQ 126 [ 1.487851] Monitor-Mwait will be used to enter C-1 state [ 1.488156] Monitor-Mwait will be used to enter C-2 state [ 1.488718] Monitor-Mwait will be used to enter C-3 state [ 1.489038] ACPI: \_SB_.PR00: Found 3 idle states [ 1.489534] ACPI: \_SB_.PR01: Found 3 idle states [ 1.490000] ACPI: \_SB_.PR02: Found 3 idle states [ 1.490421] ACPI: \_SB_.PR03: Found 3 idle states [ 1.490851] ACPI: \_SB_.PR04: Found 3 idle states [ 1.491282] ACPI: \_SB_.PR05: Found 3 idle states [ 1.491694] ACPI: \_SB_.PR06: Found 3 idle states [ 1.492141] ACPI: \_SB_.PR07: Found 3 idle states [ 1.501417] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.502049] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 1.502417] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 1.513099] brd: module loaded [ 1.513306] Loading iSCSI transport class v2.0-870. [ 1.558422] rdac: device handler registered [ 1.679081] nvme nvme0: pci function 0000:01:00.0 [ 1.679365] i2c /dev entries driver [ 1.679582] ahci 0000:00:17.0: version 3.0 [ 1.680066] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.680508] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds [ 1.681022] Cannot find slot node of this ata_port. [ 1.686496] scsi host0: ahci [ 1.686734] ata1 : SATA max UDMA/133 abar m2048@0x5e513000 port 0x5e513100 irq 127 [ 1.687525] NET: Registered protocol family 17 [ 1.687780] Key type dns_resolver registered [ 1.688666] IPI shorthand broadcast: enabled [ 1.688930] sched_clock: Marking stable (1682885186, 6019632)->(1694020852, -5116034) [ 1.689466] registered taskstats version 1 [ 1.689691] Loading compiled-in X.509 certificates [ 1.690024] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 1.693171] redpill: loading out-of-tree module taints kernel. [ 1.693533] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 1.702800] nvme nvme0: Shutdown timeout set to 8 seconds [ 1.708897] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.735154] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.735586] printk: console [ttyS0] enabled [ 1.736039] printk: bootconsole [uart8250] disabled [ 1.739894] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 1.740456] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 1.741096] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 1.741628] page_owner is disabled [ 1.741828] AppArmor: AppArmor sha1 policy hashing enabled [ 1.755505] nvme nvme0: 8/0/0 default/read/poll queues [ 1.762546] nvme0n1: p1 p2 p3 [ 1.999844] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.004852] ata1.00: ATA-9: CT240BX500SSD1, M6CR013, max UDMA/133 [ 2.005236] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.005639] ata1.00: SN:1901E16A7E62 [ 2.015964] ata1.00: configured for UDMA/133 [ 2.016240] Invalid parameter [ 2.016510] ata1.00: Find SSD disks. [CT240BX500SSD1] [ 2.018428] scsi 0:0:0:0: Direct-Access ATA CT240BX500SSD1 R013 PQ: 0 ANSI: 5 [ 2.019258] sd 0:0:0:0: got sata disk[0] [ 2.019606] ata1.00: Enabling discard_zeroes_data [ 2.020001] sd 0:0:0:0: [sata1] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.020500] sd 0:0:0:0: [sata1] Write Protect is off [ 2.020833] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 10 [ 2.021200] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 2.022015] ata1.00: Enabling discard_zeroes_data [ 2.022605] sata1: p1 p2 [ 2.023255] ata1.00: Enabling discard_zeroes_data [ 2.023686] sd 0:0:0:0: [sata1] Attached SCSI disk [ 2.042257] Freeing unused kernel image (initmem) memory: 1344K [ 2.055028] Write protecting the kernel read-only data: 18432k [ 2.056033] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 2.056621] Freeing unused kernel image (rodata/data gap) memory: 344K [ 2.057023] rodata_test: all tests were successful [ 2.057323] Run /init as init process [ 2.057549] with arguments: [ 2.057730] /init [ 2.057875] withefi [ 2.058027] DiskIdxMap [ 2.058195] sataboot2 [ 2.058360] SataPortMap [ 2.058533] with environment: [ 2.058727] HOME=/ [ 2.058878] TERM=linux [ 2.059049] pid=0x5583 [ 2.059217] syno_port_thaw=1 [ 2.059413] SasIdxMap=0 [ 2.059585] vid=0x0781 [ 2.059752] HddHotplug=0 [ 2.059930] syno_hdd_detect=0 [ 2.060132] syno_hdd_powerup_seq=0 [ 2.527798] random: crng init done [ 2.565124] ACPI: bus type USB registered [ 2.565370] usbcore: registered new interface driver usbfs [ 2.565671] usbcore: registered new interface driver hub [ 2.565972] usbcore: registered new device driver usb [ 2.577805] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 2.578099] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 [ 2.579560] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009010 [ 2.580076] xhci_hcd 0000:00:0d.0: cache line size of 64 is not supported [ 2.580704] hub 1-0:1.0: USB hub found [ 2.580920] hub 1-0:1.0: 1 port detected [ 2.581313] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 2.581616] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 [ 2.582031] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.582437] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.583163] hub 2-0:1.0: USB hub found [ 2.583391] hub 2-0:1.0: 4 ports detected [ 2.583952] usb: port power management may be unreliable [ 2.584520] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.584822] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.586342] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000000009010 [ 2.586853] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.587488] hub 3-0:1.0: USB hub found [ 2.587712] hub 3-0:1.0: 12 ports detected [ 2.588745] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.589053] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.589472] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.589911] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.590471] hub 4-0:1.0: USB hub found [ 2.590704] hub 4-0:1.0: 4 ports detected [ 2.847901] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 3.025067] usb 3-5: not running at top speed [ 3.432972] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 3.581250] usb 3-5: not running at top speed [ 3.829502] r8168 Gigabit Ethernet driver 8.052.01-NAPI loaded [ 3.846121] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 3.848763] r8168 Copyright (C) 2023 Realtek NIC software team <nicfae@realtek.com> This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 3.989085] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 4.137251] usb 3-5: not running at top speed [ 4.545080] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 4.693239] usb 3-5: not running at top speed [ 5.058902] synobios open /dev/ttyS1 success [ 5.059142] Fail to get disk 1 led type [ 5.059351] Fail to get disk 2 led type [ 5.059558] Fail to get disk 3 led type [ 5.059765] Fail to get disk 4 led type [ 5.059979] Fail to get disk 5 led type [ 5.060187] Fail to get disk 6 led type [ 5.060395] Fail to get disk 7 led type [ 5.060602] Fail to get disk 8 led type [ 5.060810] Fail to get disk 9 led type [ 5.061022] Fail to get disk 10 led type [ 5.061233] Fail to get disk 11 led type [ 5.061445] Fail to get disk 12 led type [ 5.061854] 2023-11-23 1:48:40 UTC [ 5.062044] synobios: load, major number 201 [ 5.062274] Brand: Synology [ 5.062427] Model: SA-6400 [ 5.062577] synobios cpu_arch proc entry initialized [ 5.062847] synobios crypto_hw proc entry initialized [ 5.063118] synobios syno_platform proc entry initialized [ 5.066157] Module [epyc7002_synobios] is removed. [ 5.066434] synobios: unload [ 5.100894] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 5.250106] usb 3-5: not running at top speed [ 5.658084] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 5.806273] usb 3-5: not running at top speed [ 5.945946] usb 3-7: new high-speed USB device number 3 using xhci_hcd [ 6.107229] Got empty serial number. Generate serial number from product. [ 6.245939] usb 3-9: new full-speed USB device number 4 using xhci_hcd [ 6.398176] Got empty serial number. Generate serial number from product. [ 6.536938] usb 3-10: new full-speed USB device number 5 using xhci_hcd [ 6.686861] Got empty serial number. Generate serial number from product. [ 15.357224] md: md0 stopped. [ 15.358931] md/raid1:md0: active with 1 out of 4 mirrors [ 15.360400] md0: detected capacity change from 0 to 8589869056 [ 15.425438] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 15.448709] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 15.452111] eth0: 0xffffc90000111000, 7c:8a:e1:8e:92:57, IRQ 139 [ 17.375183] Module [r8168] is removed. [ 17.419172] Module [pgdrv] is removed. [ 18.211257] md: md1 stopped. [ 18.212249] md/raid1:md1: active with 1 out of 4 mirrors [ 18.212902] md1: detected capacity change from 0 to 2147418112 [ 18.227952] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 35.371479] md1: detected capacity change from 2147418112 to 0 [ 35.371805] md: md1: set sata1p2 to syno_auto_remap [0] [ 35.372088] md: md1 stopped. [ 35.434723] synobios open /dev/ttyS1 success [ 35.434966] Fail to get disk 1 led type [ 35.435173] Fail to get disk 2 led type [ 35.435380] Fail to get disk 3 led type [ 35.435586] Fail to get disk 4 led type [ 35.435794] Fail to get disk 5 led type [ 35.436006] Fail to get disk 6 led type [ 35.436214] Fail to get disk 7 led type [ 35.436421] Fail to get disk 8 led type [ 35.436627] Fail to get disk 9 led type [ 35.436837] Fail to get disk 10 led type [ 35.437050] Fail to get disk 11 led type [ 35.437262] Fail to get disk 12 led type [ 35.437675] 2023-11-23 1:49:10 UTC [ 35.437867] synobios: load, major number 201 [ 35.438097] Brand: Synology [ 35.438250] Model: SA-6400 [ 35.438399] synobios cpu_arch proc entry initialized [ 35.438664] synobios crypto_hw proc entry initialized [ 35.438939] synobios syno_platform proc entry initialized [ 35.442006] Module [epyc7002_synobios] is removed. [ 35.442282] synobios: unload [ 39.153181] Module [rp] is removed. [ 39.337330] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 39.354142] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 39.354143] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.354605] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.356221] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 39.356662] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.357119] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.383751] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 40.114672] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 40.114675] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 40.115180] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 40.191005] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 40.193156] systemd[1]: Detected architecture x86-64. [ 40.193483] systemd[1]: Running with unpopulated /etc. [ 40.194056] systemd[1]: Set hostname to <SynologyNAS>. [ 40.194985] systemd[1]: Initializing machine ID from random generator. [ 40.241533] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 40.258052] systemd[1]: Populated /etc with preset unit settings. [ 40.414770] syno-pkg-generator: begin processing builtin package [ 40.415422] syno-pkg-generator: Load info, spk=[ActiveInsight-x86_64-2.2.2-23120.spk] [ 40.452664] syno-pkg-generator: Load info, spk=[BackupRestoreManager-x86_64-2.5.2-12461.spk] [ 40.471492] syno-pkg-generator: Load info, spk=[DhcpServer-x86_64-1.0.2-0046.spk] [ 40.479526] syno-pkg-generator: Load info, spk=[FileStation-x86_64-1.4.1-1559.spk] [ 40.501094] syno-pkg-generator: Load info, spk=[HighAvailability-x86_64-2.1.4-1581.spk] [ 40.522133] syno-pkg-generator: Load info, spk=[HybridShare-epyc7002-1.4.1-1512.spk] [ 40.538099] syno-pkg-generator: Load info, spk=[HyperBackup-ED-x86_64-1.0.0-3716.spk] [ 40.570218] syno-pkg-generator: Load info, spk=[OAuthService-x86_64-1.1.4-0101.spk] [ 40.575268] syno-pkg-generator: Load info, spk=[Python2-x86_64-2.7.18-1004.spk] [ 40.593864] syno-pkg-generator: Load info, spk=[QuickConnect-x86_64-1.0.4-0108.spk] [ 40.608145] syno-pkg-generator: Load info, spk=[SMBService-x86_64-4.15.13-0871.spk] [ 40.648068] syno-pkg-generator: Load info, spk=[ScsiTarget-x86_64-1.0.10-0314.spk] [ 40.665831] syno-pkg-generator: Load info, spk=[SecureSignIn-x86_64-1.1.4-0341.spk] [ 40.675674] syno-pkg-generator: Load info, spk=[StorageManager-epyc7002-1.0.0-0017.spk] [ 40.690815] syno-pkg-generator: Load info, spk=[SupportService-x86_64-1.1.0-21017.spk] [ 40.696094] syno-pkg-generator: Load info, spk=[SynologyUniversalSearch-x86_64-1.7.0-0704.spk] [ 40.721840] syno-pkg-generator: Load info, spk=[USBCopy-x86_64-2.2.1-1306.spk] [ 40.729458] syno-pkg-generator: Generate builtin pkg install units [ 40.735035] syno-pkg-generator: Generate builtin pkg startup units [ 41.017113] syno-pkg-generator: end processing builtin package [ 41.095557] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 41.107490] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked. [ 41.108306] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked. [ 41.128033] zram: Added device: zram0 [ 41.128350] zram: Added device: zram1 [ 41.128416] zram: Added device: zram2 [ 41.128838] zram: Added device: zram3 [ 41.136085] cryptd: max_cpu_qlen set to 1000 [ 41.142566] systemd-journald[7756]: Received request to flush runtime journal from PID 1 [ 41.144927] AVX2 version of gcm_enc/dec engaged. [ 41.145191] AES CTR mode by8 optimization enabled [ 41.151307] md: md1 stopped. [ 41.153312] md/raid1:md1: active with 1 out of 4 mirrors [ 41.153754] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 41.155072] md1: detected capacity change from 0 to 2147418112 [ 41.160200] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2023-09-23-22:10-debug initialized [ 41.171107] NET: Registered protocol family 10 [ 41.171487] Segment Routing with IPv6 [ 41.173531] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 41.189094] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 41.213799] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 41.215159] zram0: detected capacity change from 0 to 2461007872 [ 41.225860] Adding 2403324k swap on /dev/zram0. Priority:1 extents:1 across:2403324k SS [ 41.227155] zram1: detected capacity change from 0 to 2461007872 [ 41.238800] Adding 2403324k swap on /dev/zram1. Priority:1 extents:1 across:2403324k SS [ 41.240072] zram2: detected capacity change from 0 to 2461007872 [ 41.249911] Adding 2403324k swap on /dev/zram2. Priority:1 extents:1 across:2403324k SS [ 41.251218] zram3: detected capacity change from 0 to 2461007872 [ 41.260057] loop: module loaded [ 41.262827] Adding 2403324k swap on /dev/zram3. Priority:1 extents:1 across:2403324k SS [ 41.265906] Intel(R) Gigabit Ethernet Linux Driver - version 5.4.6 [ 41.266245] Copyright(c) 2007 - 2020 Intel Corporation. [ 41.272321] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.9.4 [ 41.272691] Copyright(c) 1999 - 2020 Intel Corporation. [ 41.278202] r8168 Gigabit Ethernet driver 8.046.04-NAPI-DASH loaded [ 41.284677] Reinit 1 8001 [ 41.284853] Reinit 2 1 [ 41.295037] Reinit 1 8001 [ 41.295211] Reinit 2 1 [ 41.295873] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 41.298488] r8168 Copyright (C) 2020 Realtek NIC software team <nicfae@realtek.com> This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 41.344920] qed_init called [ 41.345086] QLogic FastLinQ 4xxxx Core Module qed 8.59.6.0 [ 41.345383] creating debugfs root node [ 41.349217] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.59.6.0 [ 41.363671] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.715.8 ($DateTime: 2020/08/17 18:31:34 $) [ 41.364232] creating debugfs root node [ 41.403662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 41.404592] ehci-pci: EHCI PCI platform driver [ 41.405666] uhci_hcd: USB Universal Host Controller Interface driver [ 41.417210] synobios open /dev/ttyS1 success [ 41.417447] Fail to get disk 1 led type [ 41.417654] Fail to get disk 2 led type [ 41.417862] Fail to get disk 3 led type [ 41.418070] Fail to get disk 4 led type [ 41.418276] Fail to get disk 5 led type [ 41.418478] Fail to get disk 6 led type [ 41.418685] Fail to get disk 7 led type [ 41.418887] Fail to get disk 8 led type [ 41.419097] Fail to get disk 9 led type [ 41.419302] Fail to get disk 10 led type [ 41.419510] Fail to get disk 11 led type [ 41.419718] Fail to get disk 12 led type [ 41.420058] 2023-11-23 1:49:16 UTC [ 41.420238] synobios: load, major number 201 [ 41.420475] Brand: Synology [ 41.420626] Model: SA-6400 [ 41.420769] synobios cpu_arch proc entry initialized [ 41.421038] synobios crypto_hw proc entry initialized [ 41.421302] synobios syno_platform proc entry initialized [ 41.442321] usb-storage 3-5:1.0: USB Mass Storage device detected [ 41.442753] scsi host1: usb-storage 3-5:1.0 [ 41.443067] usbcore: registered new interface driver usb-storage [ 41.444674] usbcore: registered new interface driver uas [ 41.790005] eth0: 0xffffc90000141000, 00:11:32:c7:f4:be, IRQ 139 [ 41.796117] Reinit 1 8001 [ 41.796291] Reinit 2 1 [ 41.806483] Reinit 1 8001 [ 41.806667] Reinit 2 1 [ 41.824980] Reinit 1 8001 [ 41.825151] Reinit 2 1 [ 41.974670] 8021q: 802.1Q VLAN Support v1.8 [ 42.415199] Module [adt7475] is removed. [ 42.432000] Module [hwmon_vid] is removed. [ 42.498608] scsi 1:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 42.499267] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 42.499587] sd 1:0:0:0: [synoboot] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 42.501664] sd 1:0:0:0: [synoboot] Write Protect is off [ 42.501963] sd 1:0:0:0: [synoboot] Mode Sense: 43 00 00 00 [ 42.502626] sd 1:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 42.518964] synoboot: synoboot1 synoboot2 synoboot3 [ 42.520865] sd 1:0:0:0: [synoboot] Attached SCSI removable disk [ 42.545553] ext2: synoboot2 mounted, process=synoencvolume [ 42.547598] ext4: synoboot2 mounted, process=synoencvolume [ 42.553184] vfat: synoboot2 mounted, process=synoencvolume [ 42.589590] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 42.591398] synoboot2 unmounted, process=synoencvolume [ 43.021791] raid6: avx512x4 gen() 57465 MB/s [ 43.038802] raid6: avx512x4 xor() 17066 MB/s [ 43.055798] raid6: avx512x2 gen() 62430 MB/s [ 43.072876] raid6: avx512x2 xor() 37980 MB/s [ 43.089874] raid6: avx512x1 gen() 61643 MB/s [ 43.106873] raid6: avx512x1 xor() 36375 MB/s [ 43.123878] raid6: avx2x4 gen() 50022 MB/s [ 43.140879] raid6: avx2x4 xor() 19525 MB/s [ 43.157878] raid6: avx2x2 gen() 51638 MB/s [ 43.174878] raid6: avx2x2 xor() 29991 MB/s [ 43.191878] raid6: avx2x1 gen() 40183 MB/s [ 43.208875] raid6: avx2x1 xor() 23823 MB/s [ 43.225878] raid6: sse2x4 gen() 13734 MB/s [ 43.242876] raid6: sse2x4 xor() 7185 MB/s [ 43.259876] raid6: sse2x2 gen() 14355 MB/s [ 43.276876] raid6: sse2x2 xor() 9233 MB/s [ 43.293875] raid6: sse2x1 gen() 13423 MB/s [ 43.310874] raid6: sse2x1 xor() 7491 MB/s [ 43.311116] raid6: using algorithm avx512x2 gen() 62430 MB/s [ 43.311418] raid6: .... xor() 37980 MB/s, rmw enabled [ 43.311688] raid6: using avx512x2 recovery algorithm [ 43.312792] xor: automatically using best checksumming function avx [ 43.339209] Btrfs loaded, crc32c=crc32c-intel [ 44.448652] Module [adt7475] is removed. [ 44.456140] Module [hwmon_vid] is removed. [ 44.583151] ata1.00: configured for UDMA/133 [ 44.583422] ata1 : EH complete [ 44.583606] Invalid parameter [ 44.583876] ata1.00: Enabling discard_zeroes_data [ 44.618921] Invalid parameter [ 45.957298] Reinit 1 8001 [ 45.957519] Reinit 2 1 [ 45.964898] r8168: eth0: link up 1 Gbps [ 46.444101] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 46.482957] Module [adt7475] is removed. [ 46.500887] Module [hwmon_vid] is removed. [ 49.436892] ext2: synoboot2 mounted, process=synopkicompatsy [ 49.438594] ext4: synoboot2 mounted, process=synopkicompatsy [ 49.439969] vfat: synoboot2 mounted, process=synopkicompatsy [ 49.471244] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 49.485295] synoboot2 unmounted, process=synopkicompatsy [ 49.523681] ext2: synoboot2 mounted, process=synopkicompatsy [ 49.525347] ext4: synoboot2 mounted, process=synopkicompatsy [ 49.526278] vfat: synoboot2 mounted, process=synopkicompatsy [ 49.542896] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 49.589954] synoboot2 unmounted, process=synopkicompatsy [ 49.748581] iSCSI:target_core_rodsp_server.c:1008:rodsp_server_init RODSP server started, login_key(22e1b0466126). [ 49.788425] syno_extent_pool: module license 'Proprietary' taints kernel. [ 49.788778] Disabling lock debugging due to kernel taint [ 49.790539] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 49.829332] iSCSI:target_core_device.c:593:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 49.829958] iSCSI:target_core_configfs.c:6124:target_init_dbroot db_root: cannot open: /etc/target [ 49.830590] iSCSI:target_core_lunbackup.c:367:init_io_buffer_head 2048 buffers allocated, total 8388608 bytes successfully [ 49.904776] iSCSI:target_core_file.c:128:fd_attach_hba RODSP plugin for fileio is enabled. [ 49.905194] iSCSI:target_core_file.c:136:fd_attach_hba ODX Token Manager is enabled. [ 49.905578] iSCSI:target_core_multi_file.c:126:fd_attach_hba RODSP plugin for multifile is enabled. [ 49.906024] iSCSI:target_core_multi_file.c:134:fd_attach_hba ODX Token Manager is enabled. [ 49.906435] iSCSI:target_core_ep.c:782:ep_attach_hba RODSP plugin for epio is enabled. [ 49.906824] iSCSI:target_core_ep.c:789:ep_attach_hba ODX Token Manager is enabled. [ 50.207215] iSCSI:qla_dbg.c:2572:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.02.00.103-k. [ 50.409784] ext2: synoboot1 mounted, process=syno_bios_log_c [ 50.415214] ext4: synoboot1 mounted, process=syno_bios_log_c [ 50.416659] vfat: synoboot1 mounted, process=syno_bios_log_c [ 50.449917] FAT-fs (synoboot1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 50.452577] synoboot1 unmounted, process=syno_bios_log_c [ 52.246771] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 53.782136] fuse: init (API version 7.32) [ 430.287517] md/raid1:md2: active with 1 out of 1 mirrors [ 430.288234] md2: detected capacity change from 0 to 229072961536 [ 430.599405] flashcache_syno: /dev/vg1/volume_1 exclude check success [ 430.687526] BTRFS: device label 2023.11.23-01:55:45 v69057 devid 1 transid 3 /dev/mapper/cachedev_0 scanned by mkfs.btrfs (24756) [ 430.704724] BTRFS info (device dm-2): using free space tree [ 430.705033] BTRFS info (device dm-2): using block group cache tree [ 430.705368] BTRFS info (device dm-2): has skinny extents [ 430.705663] BTRFS info (device dm-2): flagging fs with big metadata feature [ 430.708399] BTRFS info (device dm-2): enabling ssd optimizations [ 430.708752] BTRFS info (device dm-2): root of syno feature tree is null [ 430.709362] BTRFS info (device dm-2): creating free space tree [ 430.709813] BTRFS info (device dm-2): setting compat-ro feature flag for FREE_SPACE_TREE (0x1) [ 430.711711] BTRFS info (device dm-2): cleaning free space cache v1 [ 430.713248] BTRFS info (device dm-2): creating UUID tree [ 430.715263] BTRFS info (device dm-2): setting compat feature flag for BLOCK_GROUP_CACHE_TREE (0x4000000000000000) [ 430.722384] BTRFS info (device dm-2): setting incompat feature flag for DEFAULT_SUBVOL (0x2) [ 430.818613] SYNO.Storage.CG (24434): drop_caches: 3 [ 430.871067] BTRFS info (device dm-2): enabling auto syno reclaim space [ 430.871486] BTRFS info (device dm-2): enabling ssd optimizations [ 430.871851] BTRFS info (device dm-2): using free space tree [ 430.872184] BTRFS info (device dm-2): using block group cache tree [ 430.872561] BTRFS info (device dm-2): has skinny extents [ 430.877094] BTRFS info (device dm-2): root of syno feature tree is null [ 431.384499] The mempool could be used by other devices [ 431.423343] Synotify use 16384 event queue size [ 431.423630] Synotify use 16384 event queue size [ 431.621356] BTRFS info (device dm-2): using free space tree [ 431.621668] BTRFS info (device dm-2): using block group cache tree [ 578.518466] audit: type=1400 audit(1700704692.940:2): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="ext2" srcname="/dev/synoboot2" flags="rw, silent" [ 578.520004] audit: type=1400 audit(1700704692.940:3): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="ext4" srcname="/dev/synoboot2" flags="rw, silent" [ 578.521511] audit: type=1400 audit(1700704692.940:4): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="vfat" srcname="/dev/synoboot2" flags="rw, silent" [ 585.887906] audit: type=1400 audit(1700704700.310:5): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="ext2" srcname="/dev/synoboot2" flags="rw, silent" [ 585.889291] audit: type=1400 audit(1700704700.310:6): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="ext4" srcname="/dev/synoboot2" flags="rw, silent" [ 585.890667] audit: type=1400 audit(1700704700.310:7): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="vfat" srcname="/dev/synoboot2" flags="rw, silent" This is the result of installing SA6400-69057 on an Intel I5-1136G7 laptop. There is no kernel panic. The /dev/dri directory is not visible yet. I will proceed with more detailed settings related to transcoding.

i915 driver for sa6400

Peter Suh replied to MoetaYuko's topic in Developer Discussion Room

[ 0.000000] Linux version 5.10.55+ (root@build7) (x86_64-pc-linux-gnu-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.38) #69057 SMP Sat Sep 23 21:43:07 CST 2023 [ 0.000000] Command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000400-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb8f9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bb8fa000-0x00000000bb900fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bb901000-0x00000000bc41efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc41f000-0x00000000bc98ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bc990000-0x00000000d685ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6860000-0x00000000d68f7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d68f8000-0x00000000d6937fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6938000-0x00000000d69f7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d69f8000-0x00000000daffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '115200n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z87N-WIFI/Z87N-WIFI, BIOS F6 08/12/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3491.837 MHz processor [ 0.002198] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.009672] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.015894] last_pfn = 0x41f600 max_arch_pfn = 0x400000000 [ 0.022011] MTRR default type: uncachable [ 0.026443] MTRR fixed ranges enabled: [ 0.030613] 00000-9FFFF write-back [ 0.034625] A0000-BFFFF uncachable [ 0.038611] C0000-CFFFF write-protect [ 0.042866] D0000-DFFFF uncachable [ 0.046836] E0000-FFFFF write-protect [ 0.051065] MTRR variable ranges enabled: [ 0.055514] 0 base 0000000000 mask 7C00000000 write-back [ 0.061605] 1 base 0400000000 mask 7FE0000000 write-back [ 0.067680] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.073808] 3 base 00DC000000 mask 7FFC000000 uncachable [ 0.079866] 4 base 00DB800000 mask 7FFF800000 uncachable [ 0.085984] 5 base 041F800000 mask 7FFF800000 uncachable [ 0.092034] 6 base 041F600000 mask 7FFFE00000 uncachable [ 0.098143] 7 disabled [ 0.100950] 8 disabled [ 0.103776] 9 disabled [ 0.107149] x86/PAT: PAT support disabled because CONFIG_X86_PAT is disabled in the kernel. [ 0.119751] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.127240] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.134902] last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.163474] found SMP MP-table at [mem 0x000fd710-0x000fd71f] [ 0.169898] Using GB pages for direct mapping [ 0.228893] printk: log_buf_len: 33554432 bytes [ 0.233946] printk: early log buf free: 1044080(99%) [ 0.239423] RAMDISK: [mem 0x418c75000-0x41d3fffff] [ 0.245507] ACPI: Early table checksum verification disabled [ 0.251795] ACPI: RSDP 0x00000000D69C8000 000024 (v02 ALASKA) [ 0.258214] ACPI: XSDT 0x00000000D69C8078 000074 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.267700] ACPI: FACP 0x00000000D69D4B98 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.277173] ACPI: DSDT 0x00000000D69C8188 00CA0E (v02 ALASKA A M I 00000088 INTL 20091112) [ 0.286694] ACPI: FACS 0x00000000D69F6080 000040 [ 0.291842] ACPI: APIC 0x00000000D69D4CA8 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.301401] ACPI: FPDT 0x00000000D69D4D20 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.310874] ACPI: SSDT 0x00000000D69D4D68 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.320355] ACPI: SSDT 0x00000000D69D52A8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.329846] ACPI: MCFG 0x00000000D69D5D80 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.339405] ACPI: HPET 0x00000000D69D5DC0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.348930] ACPI: SSDT 0x00000000D69D5DF8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.358429] ACPI: SSDT 0x00000000D69D6168 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.367910] ACPI: DMAR 0x00000000D69D9650 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.377418] ACPI: Reserving FACP table memory at [mem 0xd69d4b98-0xd69d4ca3] [ 0.385243] ACPI: Reserving DSDT table memory at [mem 0xd69c8188-0xd69d4b95] [ 0.393103] ACPI: Reserving FACS table memory at [mem 0xd69f6080-0xd69f60bf] [ 0.400938] ACPI: Reserving APIC table memory at [mem 0xd69d4ca8-0xd69d4d19] [ 0.408729] ACPI: Reserving FPDT table memory at [mem 0xd69d4d20-0xd69d4d63] [ 0.416539] ACPI: Reserving SSDT table memory at [mem 0xd69d4d68-0xd69d52a0] [ 0.424399] ACPI: Reserving SSDT table memory at [mem 0xd69d52a8-0xd69d5d7f] [ 0.432217] ACPI: Reserving MCFG table memory at [mem 0xd69d5d80-0xd69d5dbb] [ 0.440087] ACPI: Reserving HPET table memory at [mem 0xd69d5dc0-0xd69d5df7] [ 0.447982] ACPI: Reserving SSDT table memory at [mem 0xd69d5df8-0xd69d6164] [ 0.455799] ACPI: Reserving SSDT table memory at [mem 0xd69d6168-0xd69d9648] [ 0.463626] ACPI: Reserving DMAR table memory at [mem 0xd69d9650-0xd69d9707] [ 0.471460] ACPI: Local APIC address 0xfee00000 [ 0.476519] No NUMA configuration found [ 0.480804] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff] [ 0.488266] NODE_DATA(0) allocated [mem 0x41d5f7000-0x41d5fafff] [ 0.495046] Zone ranges: [ 0.497850] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.504716] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.511622] Normal [mem 0x0000000100000000-0x000000041f5fffff] [ 0.518496] Movable zone start for each node [ 0.523244] Early memory node ranges [ 0.527267] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.534243] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.541211] node 0: [mem 0x0000000000100000-0x00000000bb8f9fff] [ 0.548137] node 0: [mem 0x00000000bb901000-0x00000000bc41efff] [ 0.555121] node 0: [mem 0x00000000bc990000-0x00000000d685ffff] [ 0.562073] node 0: [mem 0x00000000d68f8000-0x00000000d6937fff] [ 0.569058] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.576051] node 0: [mem 0x0000000100000000-0x000000041f5fffff] [ 0.583059] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f5fffff] [ 0.590900] On node 0 totalpages: 4151494 [ 0.595345] DMA zone: 64 pages used for memmap [ 0.600441] DMA zone: 23 pages reserved [ 0.604896] DMA zone: 3997 pages, LIFO batch:0 [ 0.610044] DMA32 zone: 13645 pages used for memmap [ 0.615676] DMA32 zone: 873257 pages, LIFO batch:63 [ 0.621302] Normal zone: 51160 pages used for memmap [ 0.627022] Normal zone: 3274240 pages, LIFO batch:63 [ 0.632858] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.632861] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.639430] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.657610] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.665890] On node 0, zone DMA32: 1393 pages in unavailable ranges [ 0.672596] On node 0, zone DMA32: 152 pages in unavailable ranges [ 0.679970] On node 0, zone DMA32: 18119 pages in unavailable ranges [ 0.737050] On node 0, zone Normal: 20480 pages in unavailable ranges [ 0.744155] On node 0, zone Normal: 2560 pages in unavailable ranges [ 0.751339] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff] [ 0.766214] ACPI: PM-Timer IO Port: 0x1808 [ 0.770764] ACPI: Local APIC address 0xfee00000 [ 0.775827] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.782423] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.790057] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.797119] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.804512] ACPI: IRQ0 used by override. [ 0.808896] ACPI: IRQ9 used by override. [ 0.813275] Using ACPI (MADT) for SMP configuration information [ 0.819835] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.825561] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later) [ 0.837315] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.842916] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.851374] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.859790] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.868194] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.876603] PM: hibernation: Registered nosave memory: [mem 0xbb8fa000-0xbb900fff] [ 0.885010] PM: hibernation: Registered nosave memory: [mem 0xbc41f000-0xbc98ffff] [ 0.893426] PM: hibernation: Registered nosave memory: [mem 0xd6860000-0xd68f7fff] [ 0.901859] PM: hibernation: Registered nosave memory: [mem 0xd6938000-0xd69f7fff] [ 0.910273] PM: hibernation: Registered nosave memory: [mem 0xd69f8000-0xdaffefff] [ 0.918682] PM: hibernation: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.927104] PM: hibernation: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.935562] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.943969] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.952376] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.960800] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.969215] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.977588] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.986029] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.994470] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 1.002886] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 1.011294] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 1.019701] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 1.028134] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 1.036568] [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 1.043391] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 1.065763] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:4 nr_node_ids:1 [ 1.074641] percpu: Embedded 53 pages/cpu s176664 r8192 d32232 u524288 [ 1.081929] pcpu-alloc: s176664 r8192 d32232 u524288 alloc=1*2097152 [ 1.089000] pcpu-alloc: [0] 0 1 2 3 [ 1.093030] Built 1 zonelists, mobility grouping on. Total pages: 4086602 [ 1.100665] Policy zone: Normal [ 1.104135] Kernel command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 1.152307] Synology Hardware Version: SA6400 [ 1.157175] Internal netif num: 2 [ 1.160984] Mac2: 94DE806D73B4 [ 1.164350] Mac1: 001132C7F4BE [ 1.167747] Serial Number: 1980PDN028952 [ 1.172135] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 1.187083] Vender format version: 2 [ 1.193870] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 1.301563] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 1.405802] mem auto-init: stack:off, heap alloc:off, heap free:off [ 1.594263] Memory: 15992372K/16605976K available (10248K kernel code, 4829K rwdata, 5800K rodata, 1344K init, 10984K bss, 613348K reserved, 0K cma-reserved) [ 1.779687] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 1.865498] ftrace: allocating 32589 entries in 128 pages [ 1.970304] ftrace: allocated 128 pages with 1 groups [ 2.036833] rcu: Hierarchical RCU implementation. [ 2.098663] rcu: RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=4. [ 2.185608] Rude variant of Tasks RCU enabled. [ 2.245096] Tracing variant of Tasks RCU enabled. [ 2.308019] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 2.408693] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 2.507776] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 2.585255] Console: colour dummy device 80x25 [ 2.643660] ACPI: Core revision 20200925 [ 2.695361] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 2.815588] APIC: Switch to symmetric I/O mode setup [ 2.880875] DMAR: Host address width 39 [ 2.931211] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 3.001005] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 3.105102] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 3.174893] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 3.278994] DMAR: RMRR base: 0x000000dae83000 end: 0x000000dae91fff [ 3.361365] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 3.443736] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 3.527247] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 3.598177] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 3.712317] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 3.783293] x2apic enabled [ 3.818764] Switched APIC routing to cluster x2apic. [ 3.884855] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 3.968584] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325531ed3c7, max_idle_ns: 440795306136 ns [ 4.107057] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.67 BogoMIPS (lpj=3491837) [ 4.108059] pid_max: default: 32768 minimum: 301 [ 4.109098] LSM: Security Framework initializing [ 4.110098] AppArmor: AppArmor initialized [ 4.111133] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 4.112124] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 4.113636] mce: CPU0: Thermal monitoring enabled (TM1) [ 4.114094] process: using mwait in idle threads [ 4.115063] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 4.116058] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 4.117062] Speculative Store Bypass: Vulnerable [ 4.118059] SRBDS: Vulnerable: No microcode [ 4.120357] Freeing SMP alternatives memory: 32K [ 4.224117] smpboot: CPU0: Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 4.225312] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 4.226060] ... version: 3 [ 4.227058] ... bit width: 48 [ 4.228058] ... generic registers: 8 [ 4.229059] ... value mask: 0000ffffffffffff [ 4.230058] ... max period: 00007fffffffffff [ 4.231057] ... fixed-purpose events: 3 [ 4.232058] ... event mask: 00000007000000ff [ 4.233341] rcu: Hierarchical SRCU implementation. [ 4.235692] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 4.236173] smp: Bringing up secondary CPUs ... [ 4.237235] x86: Booting SMP configuration: [ 4.238061] .... node #0, CPUs: #1 #2 #3 [ 4.242684] smp: Brought up 1 node, 4 CPUs [ 4.244059] smpboot: Max logical packages: 1 [ 4.245062] smpboot: Total of 4 processors activated (27934.69 BogoMIPS) [ 4.248271] devtmpfs: initialized [ 4.250246] random: get_random_u32 called from bucket_table_alloc.isra.0+0x6e/0x160 with crng_init=0 [ 4.250269] PM: Registering ACPI NVS region [mem 0xbb8fa000-0xbb900fff] (28672 bytes) [ 4.252062] PM: Registering ACPI NVS region [mem 0xd6938000-0xd69f7fff] (786432 bytes) [ 4.253181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 4.254066] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 4.255161] pinctrl core: initialized pinctrl subsystem [ 4.257296] NET: Registered protocol family 16 [ 4.258278] audit: initializing netlink subsys (disabled) [ 4.259077] audit: type=2000 audit(1700666646.171:1): state=initialized audit_enabled=0 res=1 [ 4.260146] thermal_sys: Registered thermal governor 'step_wise' [ 4.261124] cpuidle: using governor ladder [ 4.393078] cpuidle: using governor menu [ 4.445164] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 4.544064] ACPI: bus type PCI registered [ 4.597059] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 4.682214] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 4.804063] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 4.894073] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 5.031190] PCI: Using configuration type 1 for base access [ 5.104203] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 5.200826] Kprobes globally optimized [ 5.251114] ACPI: Added _OSI(Module Device) [ 5.306084] ACPI: Added _OSI(Processor Device) [ 5.364059] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.426062] ACPI: Added _OSI(Processor Aggregator Device) [ 5.497059] ACPI: Added _OSI(Linux-Dell-Video) [ 5.555061] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 5.625059] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 5.715110] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 5.801591] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 5.883058] ACPI: Dynamic OEM Table Load: [ 5.936068] ACPI: SSDT 0xFFFF888100AEF400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 6.050062] ACPI: Dynamic OEM Table Load: [ 6.102067] ACPI: SSDT 0xFFFF888100AA4000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 6.216119] ACPI: Dynamic OEM Table Load: [ 6.269064] ACPI: SSDT 0xFFFF88810106A600 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 6.384635] ACPI: Interpreter enabled [ 6.433096] ACPI: (supports S0 S4 S5) [ 6.481059] ACPI: Using IOAPIC for interrupt routing [ 6.547058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 6.667100] ACPI: Enabled 7 GPEs in block 00 to 3F [ 6.752102] ACPI: Power Resource [FN00] (off) [ 6.810258] ACPI: Power Resource [FN01] (off) [ 6.867257] ACPI: Power Resource [FN02] (off) [ 6.925081] ACPI: Power Resource [FN03] (off) [ 6.982249] ACPI: Power Resource [FN04] (off) [ 7.041060] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 7.122075] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 7.242062] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 7.337395] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 7.429063] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 7.537104] PCI host bridge to bus 0000:00 [ 7.591068] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 7.680060] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 7.769062] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 7.868059] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 7.966062] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 8.065059] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 8.163061] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 8.261060] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 8.360062] pci_bus 0000:00: root bus resource [bus 00-3e] [ 8.432086] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 8.511296] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 8.590081] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 8.679076] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 8.774068] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 8.848313] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 8.927076] pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit] [ 9.016345] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 9.095086] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit] [ 9.185167] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 9.261183] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 9.340089] pci 0000:00:16.0: reg 0x10: [mem 0xf7e3f000-0xf7e3f00f 64bit] [ 9.430161] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 9.510241] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 9.589080] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff] [ 9.672058] pci 0000:00:19.0: reg 0x14: [mem 0xf7e3d000-0xf7e3dfff] [ 9.754070] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 9.827155] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 9.907141] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 9.986084] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e3c000-0xf7e3c3ff] [ 10.069186] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 10.149268] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 10.228082] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit] [ 10.318062] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 10.398264] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 10.477188] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 10.557098] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 10.619129] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 10.707469] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 10.786199] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 10.867099] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 10.929124] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 11.017350] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 11.096189] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 11.176097] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 11.238071] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 11.327081] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 11.406085] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff] [ 11.488192] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 11.569290] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 11.648323] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 11.727083] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 11.800073] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 11.873073] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 11.947069] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 12.020071] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 12.093070] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff] [ 12.176124] pci 0000:00:1f.2: PME# supported from D3hot [ 12.244259] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 12.323089] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit] [ 12.413090] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 12.486401] acpiphp: Slot [1] registered [ 12.538069] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 12.603202] pci 0000:02:00.0: [1969:1091] type 00 class 0x020000 [ 12.682102] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d3ffff 64bit] [ 12.772075] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f] [ 12.845232] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 12.932280] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 12.998067] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 13.078063] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 13.167216] pci 0000:03:00.0: [8086:0887] type 00 class 0x028000 [ 13.246103] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit] [ 13.336064] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 13.416177] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 13.481069] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 13.572479] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 13.675184] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 13.781102] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 13.884162] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 13.987158] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15), disabled. [ 14.090161] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 14.195157] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15), disabled. [ 14.298160] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 14.402772] iommu: Default domain type: Passthrough (set via kernel command line) [ 14.501114] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 14.502055] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 14.692071] pci 0000:00:02.0: vgaarb: bridge control possible [ 14.768059] vgaarb: loaded [ 14.803189] SCSI subsystem initialized [ 14.852104] libata version 3.00 loaded. [ 14.903125] pps_core: LinuxPPS API ver. 1 registered [ 14.968058] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 15.088069] PTP clock support registered [ 15.140102] EDAC MC: Ver: 3.0.0 [ 15.181459] PCI: Using ACPI for IRQ routing [ 15.239197] PCI: pci_cache_line_size set to 64 bytes [ 15.304135] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 15.383060] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 15.462062] e820: reserve RAM buffer [mem 0xbb8fa000-0xbbffffff] [ 15.541062] e820: reserve RAM buffer [mem 0xbc41f000-0xbfffffff] [ 15.620065] e820: reserve RAM buffer [mem 0xd6860000-0xd7ffffff] [ 15.699060] e820: reserve RAM buffer [mem 0xd6938000-0xd7ffffff] [ 15.778062] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 15.857062] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff] [ 15.938161] clocksource: Switched to clocksource tsc-early [ 16.042098] VFS: Disk quotas dquot_6.6.0 [ 16.093681] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.184332] AppArmor: AppArmor Filesystem Enabled [ 16.246207] pnp: PnP ACPI init [ 16.286483] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 16.373443] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 16.463086] system 00:01: [io 0x0680-0x069f] has been reserved [ 16.540868] system 00:01: [io 0xffff] has been reserved [ 16.610648] system 00:01: [io 0xffff] has been reserved [ 16.680436] system 00:01: [io 0xffff] has been reserved [ 16.750219] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 16.828019] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 16.905807] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 16.983602] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 17.061394] system 00:01: [io 0x1800-0x18fe] has been reserved [ 17.139189] system 00:01: [io 0x164e-0x164f] has been reserved [ 17.216994] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 17.306280] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 17.392243] system 00:03: [io 0x1854-0x1857] has been reserved [ 17.470037] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 17.568737] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 17.646519] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 17.724304] system 00:04: [io 0x0a20-0x0a2f] has been reserved [ 17.802112] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 17.891871] pnp 00:05: [dma 0 disabled] [ 17.942309] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 18.028224] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 18.106013] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 18.196171] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 18.283116] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 18.370055] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 18.457004] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 18.543947] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 18.630896] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 18.717840] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 18.809365] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 18.896308] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 18.983257] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 19.074777] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 19.161725] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 19.248681] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 19.338449] pnp: PnP ACPI: found 8 devices [ 19.400792] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 19.517582] NET: Registered protocol family 2 [ 19.575279] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 19.681700] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 19.795052] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 19.901843] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 19.999415] TCP: Hash tables configured (established 131072 bind 65536) [ 20.086469] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 20.175826] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 20.270944] NET: Registered protocol family 1 [ 20.328246] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 20.393544] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 20.458743] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 20.538822] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 20.628069] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 20.693265] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 20.782509] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 20.863721] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 20.944950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 21.035324] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 21.125710] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 21.216081] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 21.306462] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 21.397980] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window] [ 21.489506] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 21.562720] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 21.645093] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 21.727665] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 21.837507] pci 0000:00:02.0: pci_fixup_video+0x0/0xb0 took 107262 usecs [ 21.926759] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag [ 22.000081] pci 0000:02:00.0: quirk_msi_intx_disable_qca_bug+0x0/0x10 took 71596 usecs [ 22.104272] PCI: CLS 64 bytes, default 64 [ 26.858187] Trying to unpack rootfs image as initramfs... [ 27.012029] Freeing initrd memory: 73260K [ 27.064716] DMAR: No ATSR found [ 27.106021] DMAR: dmar0: Using Queued invalidation [ 27.168998] DMAR: dmar1: Using Queued invalidation [ 27.513566] pci 0000:00:00.0: Adding to iommu group 0 [ 27.580018] pci 0000:00:02.0: Adding to iommu group 1 [ 27.646469] pci 0000:00:03.0: Adding to iommu group 2 [ 27.712817] pci 0000:00:14.0: Adding to iommu group 3 [ 27.779178] pci 0000:00:16.0: Adding to iommu group 4 [ 27.845628] pci 0000:00:19.0: Adding to iommu group 5 [ 27.911981] pci 0000:00:1a.0: Adding to iommu group 6 [ 27.978335] pci 0000:00:1b.0: Adding to iommu group 7 [ 28.044690] pci 0000:00:1c.0: Adding to iommu group 8 [ 28.111044] pci 0000:00:1c.3: Adding to iommu group 9 [ 28.177397] pci 0000:00:1c.4: Adding to iommu group 10 [ 28.244895] pci 0000:00:1d.0: Adding to iommu group 11 [ 28.312411] pci 0000:00:1f.0: Adding to iommu group 12 [ 28.379994] pci 0000:00:1f.2: Adding to iommu group 12 [ 28.447489] pci 0000:00:1f.3: Adding to iommu group 12 [ 28.514990] pci 0000:02:00.0: Adding to iommu group 13 [ 28.582484] pci 0000:03:00.0: Adding to iommu group 14 [ 28.650065] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 28.734724] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 28.819387] software IO TLB: mapped [mem 0x00000000d2860000-0x00000000d6860000] (64MB) [ 28.923631] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 29.027812] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 29.103308] RAPL PMU: hw unit of domain package 2^-14 Joules [ 29.177671] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 29.248598] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 29.325974] Initialise system trusted keyrings [ 29.415843] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 29.505227] Key type asymmetric registered [ 29.559047] Asymmetric key parser 'x509' registered [ 29.623135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 29.720354] io scheduler mq-deadline registered [ 29.779842] io scheduler kyber registered [ 29.832535] io scheduler bfq registered [ 29.885172] Monitor-Mwait will be used to enter C-1 state [ 29.956282] Monitor-Mwait will be used to enter C-2 state [ 30.027307] ACPI: \_PR_.CPU0: Found 2 idle states [ 30.089768] ACPI: \_PR_.CPU1: Found 2 idle states [ 30.152042] ACPI: \_PR_.CPU2: Found 2 idle states [ 30.214337] ACPI: \_PR_.CPU3: Found 2 idle states [ 30.359094] tsc: Refined TSC clocksource calibration: 3491.912 MHz [ 30.440381] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3255787006b, max_idle_ns: 440795244845 ns [ 31.041789] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 31.125433] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 31.227277] printk: console [ttyS0] enabled [ 31.236245] printk: bootconsole [uart8250] disabled [ 31.423005] clocksource: Switched to clocksource tsc [ 31.430954] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 31.437773] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 31.462712] brd: module loaded [ 31.465961] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200925/utaddress-204) [ 31.481682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.491960] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.507546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.517828] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204) [ 31.533445] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.548998] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.559349] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204) [ 31.574954] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.590477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.600765] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 31.607168] Loading iSCSI transport class v2.0-870. [ 31.627149] rdac: device handler registered [ 31.646050] i2c /dev entries driver [ 31.649684] ahci 0000:00:1f.2: version 3.0 [ 31.654283] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 31.662486] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 31.669875] Cannot find slot node of this ata_port. [ 31.674838] Cannot find slot node of this ata_port. [ 31.694511] scsi host0: ahci [ 31.717114] scsi host1: ahci [ 31.726863] scsi host2: ahci [ 31.730660] scsi host3: ahci [ 31.734317] scsi host4: ahci [ 31.741653] scsi host5: ahci [ 31.744779] ata1 : SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 29 [ 31.752375] ata2 : SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a180 irq 29 [ 31.759910] ata3 : DUMMY [ 31.762480] ata4 : DUMMY [ 31.765038] ata5 : DUMMY [ 31.767604] ata6 : DUMMY [ 31.770268] ata3 : port disabled [ 31.770376] ata4 : port disabled [ 31.771803] NET: Registered protocol family 17 [ 31.771823] Key type dns_resolver registered [ 31.772068] ata5 : port disabled [ 31.772073] Invalid parameter [ 31.772159] ata6 : port disabled [ 31.772164] Invalid parameter [ 31.773571] Invalid parameter [ 31.801193] Invalid parameter [ 31.804824] IPI shorthand broadcast: enabled [ 31.809183] sched_clock: Marking stable (30306208278, 1502954689)->(34868485575, -3059322608) [ 31.817937] registered taskstats version 1 [ 31.822111] Loading compiled-in X.509 certificates [ 31.827038] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 31.840081] redpill: loading out-of-tree module taints kernel. [ 31.846100] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 32.076409] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 32.083020] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 32.090929] ata2.00: ATA-9: ADATA SP600, 2.3, max UDMA/100 [ 32.096510] ata2.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 32.103390] ata2.00: SN:03912202500600000028 [ 32.107753] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 32.114533] ata1.00: ATA-9: ADATA SP600, 2.9, max UDMA/100 [ 32.120137] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 32.120877] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 32.127003] ata1.00: SN:2E3520001576 [ 32.127072] ata2.00: configured for UDMA/100 [ 32.137262] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 32.140843] Invalid parameter [ 32.145173] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 32.157227] ata1.00: configured for UDMA/100 [ 32.159840] page_owner is disabled [ 32.169751] Invalid parameter [ 32.174100] AppArmor: AppArmor sha1 policy hashing enabled [ 32.177543] ata1.00: Find SSD disks. [ADATA SP600] [ 32.191217] scsi 0:0:0:0: Direct-Access ADATA SP600 2.9 PQ: 0 ANSI: 5 [ 32.200363] sd 0:0:0:0: got sata disk[0] [ 32.200467] ata2.00: Find SSD disks. [ADATA SP600] [ 32.204552] sd 0:0:0:0: [sata1] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 32.209405] scsi 1:0:0:0: Direct-Access ADATA SP600 2.3 PQ: 0 ANSI: 5 [ 32.217073] sd 0:0:0:0: [sata1] Write Protect is off [ 32.226213] sd 1:0:0:0: got sata disk[1] [ 32.231008] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 10 [ 32.231114] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 32.235247] sd 1:0:0:0: [sata2] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 32.256981] sd 1:0:0:0: [sata2] Write Protect is off [ 32.257833] sata1: p1 p2 p3 < p5 > [ 32.262005] sd 1:0:0:0: [sata2] Mode Sense: 00 3a 00 10 [ 32.266385] sd 0:0:0:0: [sata1] Attached SCSI disk [ 32.270920] sd 1:0:0:0: [sata2] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 32.291920] sata2: p1 p2 [ 32.295871] sd 1:0:0:0: [sata2] Attached SCSI disk [ 32.305701] Freeing unused kernel image (initmem) memory: 1344K [ 32.318469] Write protecting the kernel read-only data: 18432k [ 32.325473] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 32.332400] Freeing unused kernel image (rodata/data gap) memory: 344K [ 32.339001] rodata_test: all tests were successful [ 32.343855] Run /init as init process [ 32.347551] with arguments: [ 32.350540] /init [ 32.352838] withefi [ 32.355315] DiskIdxMap [ 32.358030] sataboot2 [ 32.360673] SataPortMap [ 32.363498] with environment: [ 32.366678] HOME=/ [ 32.369062] TERM=linux [ 32.371808] pid=0x5583 [ 32.374554] syno_port_thaw=1 [ 32.377814] SasIdxMap=0 [ 32.380649] vid=0x0781 [ 32.383387] HddHotplug=0 [ 32.386326] syno_hdd_detect=0 [ 32.389695] syno_hdd_powerup_seq=0 [ 32.894082] random: crng init done [ 33.066908] ACPI: bus type USB registered [ 33.071043] usbcore: registered new interface driver usbfs [ 33.076657] usbcore: registered new interface driver hub [ 33.082064] usbcore: registered new device driver usb [ 33.141176] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 33.146503] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 33.155122] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009010 [ 33.164361] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 33.171902] hub 1-0:1.0: USB hub found [ 33.175745] hub 1-0:1.0: 14 ports detected [ 33.184702] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 33.190049] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 33.197538] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 33.203942] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 33.212593] hub 2-0:1.0: USB hub found [ 33.216442] hub 2-0:1.0: 6 ports detected [ 33.457092] usb 1-11: new full-speed USB device number 2 using xhci_hcd [ 33.615666] Got empty serial number. Generate serial number from product. [ 33.748139] usb 2-5: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 38.270083] DMABUF-COMPAT BACKPORTED INIT [ 38.275337] DMAHEAP BACKPORTED INIT [ 38.280228] Loading dma-buf modules backported from I915-23.8.20 [ 38.287669] DMA BUF backport generated by backports.git RHEL_88_23.8.20_PSB_230810.24 [ 38.300135] [drm] DRM BACKPORTED INIT [ 38.307277] [drm] DRM_KMS_HELPER BACKPORTED INIT [ 38.313629] I915 COMPAT BACKPORTED INIT [ 38.318976] Loading I915 modules backported from I915-23.8.20 [ 38.326187] I915 Backport generated by backports.git RHEL_88_23.8.20_PSB_230810.24 [ 38.356418] [drm] I915 BACKPORTED INIT [ 38.362040] i915 0000:00:02.0: [drm] GT count: 1, enabled: 1 [ 38.368656] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 38.376268] type mismatch for e0000000,10000000 old: write-back new: write-combining [ 38.384996] Failed to add WC MTRR for [00000000bec5d527-00000000ac95f8d5]; performance may suffer. [ 38.385042] i915 0000:00:02.0: [drm] Transparent Hugepage support is recommended for optimal performance when IOMMU is enabled! [ 38.407012] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory [ 38.417437] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 38.442136] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 38.450485] #PF: supervisor instruction fetch in kernel mode [ 38.456171] #PF: error_code(0x0010) - not-present page [ 38.462750] PGD 0 P4D 0 [ 38.465317] Oops: 0010 [#1] SMP NOPTI [ 38.469035] CPU: 1 PID: 4450 Comm: modprobe Tainted: G OE 5.10.55+ #69057 [ 38.477136] Hardware name: Gigabyte Technology Co., Ltd. Z87N-WIFI/Z87N-WIFI, BIOS F6 08/12/2014 [ 38.486024] RIP: 0010:0x0 [ 38.488683] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 38.495622] RSP: 0018:ffffc9000064f9f8 EFLAGS: 00010246 [ 38.500909] RAX: 0000000000000000 RBX: ffff88810f7d0000 RCX: 0000000000001000 [ 38.508101] RDX: ffff888101153c00 RSI: 0000000000000527 RDI: ffff88810f7d0000 [ 38.515302] RBP: 0000000000000000 R08: 000000ffffffffff R09: 0000000000000000 [ 38.522512] R10: 0000000101aebfff R11: 0000000000000000 R12: ffff88810f7d01c0 [ 38.529716] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000400 [ 38.536926] FS: 00007f4b7c453740(0000) GS:ffff888401a80000(0000) knlGS:0000000000000000 [ 38.545064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.550888] CR2: ffffffffffffffd6 CR3: 000000010f4be002 CR4: 00000000001706e0 [ 38.558099] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 38.565302] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 38.572503] Call Trace: [ 38.575203] [<ffffffffa0281df5>] vma_get_pages+0x95/0x130 [i915] [ 38.582755] [<ffffffffa0284360>] ? i915_vma_pin_ww+0x370/0x9e0 [i915] [ 38.590526] [<ffffffff81226992>] ? __kmalloc+0x142/0x2e0 [ 38.596166] [<ffffffffa0284b24>] ? i915_ggtt_pin_for_gt+0x154/0x200 [i915] [ 38.604560] [<ffffffffa0218a5b>] ? intel_gt_init+0xab/0x930 [i915] [ 38.612298] [<ffffffffa01dde6e>] ? fwtable_read32+0x8e/0x210 [i915] [ 38.620072] [<ffffffffa01dd819>] ? gen6_write32+0x59/0x1e0 [i915] [ 38.627761] [<ffffffffa02772f8>] ? i915_gem_init+0x208/0x280 [i915] [ 38.635535] [<ffffffffa01b3a24>] ? i915_driver_probe+0x14f4/0x1d70 [i915] [ 38.643740] [<ffffffff8145360f>] ? create_pinctrl+0x2f/0x430 [ 38.649691] [<ffffffffa01c179b>] ? i915_pci_probe+0x9b/0x3d0 [i915] [ 38.657358] [<ffffffff8147062e>] ? local_pci_probe+0x3e/0x70 [ 38.663149] [<ffffffff814716f1>] ? pci_device_probe+0xd1/0x180 [ 38.669126] [<ffffffff81533c4d>] ? really_probe+0xed/0x420 [ 38.674783] [<ffffffff8153424e>] ? driver_probe_device+0x4e/0xa0 [ 38.680919] [<ffffffff81534521>] ? device_driver_attach+0xa1/0xb0 [ 38.687183] [<ffffffff81534530>] ? device_driver_attach+0xb0/0xb0 [ 38.693431] [<ffffffff815345a2>] ? __driver_attach+0x72/0x100 [ 38.699308] [<ffffffff81534530>] ? device_driver_attach+0xb0/0xb0 [ 38.705548] [<ffffffff81531aa1>] ? bus_for_each_dev+0x61/0x90 [ 38.711458] [<ffffffff81532faf>] ? bus_add_driver+0x10f/0x1c0 [ 38.717352] [<ffffffff81534e59>] ? driver_register+0x89/0xd0 [ 38.723329] [<ffffffffa047c033>] ? __init_backport+0x33/0x8c [i915] [ 38.730959] [<ffffffffa047c000>] ? 0xffffffffa047c000 [ 38.736151] [<ffffffff81000bfd>] ? do_one_initcall+0x3d/0x1c0 [ 38.742043] [<ffffffff810ff5d2>] ? do_init_module+0x22/0x250 [ 38.747869] [<ffffffff81227b5e>] ? kmem_cache_alloc_trace+0x12e/0x2a0 [ 38.754453] [<ffffffff810ff60a>] ? do_init_module+0x5a/0x250 [ 38.760268] [<ffffffff811023f8>] ? __do_sys_finit_module+0x88/0xb0 [ 38.766627] [<ffffffff81787853>] ? do_syscall_64+0x33/0x40 [ 38.772267] [<ffffffff8180007c>] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 38.779379] Modules linked in: i915(OE+) i2c_algo_bit i915_compat(OE) drm_mipi_dsi(OE) intel_gtt(OE) drm_kms_helper(OE) drm(OE) drm_panel_orientation_quirks(OE) hdmi(OE) dmabuf(OE) xhci_pci xhci_hcd usbcore usb_common [ 38.800237] CR2: 0000000000000000 [ 38.803619] ---[ end trace 5e832f8482f0d9cf ]--- [ 38.808637] RIP: 0010:0x0 [ 38.811294] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 38.818217] RSP: 0018:ffffc9000064f9f8 EFLAGS: 00010246 [ 38.823485] RAX: 0000000000000000 RBX: ffff88810f7d0000 RCX: 0000000000001000 [ 38.830668] RDX: ffff888101153c00 RSI: 0000000000000527 RDI: ffff88810f7d0000 [ 38.837872] RBP: 0000000000000000 R08: 000000ffffffffff R09: 0000000000000000 [ 38.845082] R10: 0000000101aebfff R11: 0000000000000000 R12: ffff88810f7d01c0 [ 38.852283] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000400 [ 38.859505] FS: 00007f4b7c453740(0000) GS:ffff888401a80000(0000) knlGS:0000000000000000 [ 38.867711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.873526] CR2: ffffffffffffffd6 CR3: 000000010f4be002 CR4: 00000000001706e0 [ 38.880729] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 38.887957] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 40.002725] e1000e: Intel(R) PRO/1000 Network Driver [ 40.007740] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 40.014090] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 40.104357] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 40.196228] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 94:de:80:6d:73:b4 [ 40.204249] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 40.211206] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 42.441356] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel) [ 43.488442] alx 0000:02:00.0 eth1: Qualcomm Atheros AR816x/AR817x Ethernet [00:11:32:c7:f4:be] [ 43.921881] synobios open /dev/ttyS1 success [ 43.926217] Fail to get disk 1 led type [ 43.930084] Fail to get disk 2 led type [ 43.933982] Fail to get disk 3 led type [ 43.937856] Fail to get disk 4 led type [ 43.941730] Fail to get disk 5 led type [ 43.945614] Fail to get disk 6 led type [ 43.949506] Fail to get disk 7 led type [ 43.953404] Fail to get disk 8 led type [ 43.957295] Fail to get disk 9 led type [ 43.961176] Fail to get disk 10 led type [ 43.965148] Fail to get disk 11 led type [ 43.969126] Fail to get disk 12 led type [ 43.973140] 2023-11-22 15:24:50 UTC [ 43.976667] synobios: load, major number 201 [ 43.981004] Brand: Synology [ 43.983844] Model: SA-6400 [ 43.986584] synobios cpu_arch proc entry initialized [ 43.991599] synobios crypto_hw proc entry initialized [ 43.996696] synobios syno_platform proc entry initialized [ 44.013547] Module [epyc7002_synobios] is removed. [ 44.018527] synobios: unload [ 44.765760] md: md0 stopped. [ 44.770835] md: kicking non-fresh sata2p1 from array! [ 44.783741] md/raid1:md0: active with 1 out of 4 mirrors [ 44.791758] md0: detected capacity change from 0 to 8589869056 [ 45.463459] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 45.550406] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 45.787931] Module [r8168] is removed. [ 46.005574] loop: module loaded [ 49.300658] Module [rp] is removed. [ 49.497821] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 49.571437] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 49.571441] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.580105] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.593332] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 49.602500] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.611089] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.720133] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 53.346840] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 53.346845] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 53.356463] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 53.495386] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 53.522178] systemd[1]: Detected architecture x86-64. [ 53.527668] systemd[1]: Set hostname to <SA6400>. [ 55.691746] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 55.745024] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked. [ 55.759345] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked. [ 55.774547] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked. [ 55.787073] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory. [ 55.805231] systemd[1]: Cannot add dependency job for unit pkg-synorelayd-reload-fixed-package-config.service, ignoring: Unit synorelayd.service failed to load: No such file or directory. [ 55.822149] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory. [ 55.941782] zram: Added device: zram0 [ 55.950711] zram: Added device: zram1 [ 55.951112] systemd-journald[6879]: Received request to flush runtime journal from PID 1 [ 55.962014] zram: Added device: zram2 [ 55.975264] zram: Added device: zram3 [ 55.975518] cryptd: max_cpu_qlen set to 1000 [ 56.009856] AVX2 version of gcm_enc/dec engaged. [ 56.015597] AES CTR mode by8 optimization enabled [ 56.064282] md: md1 stopped. [ 56.071298] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 56.084383] md/raid1:md1: active with 1 out of 4 mirrors [ 56.095911] NET: Registered protocol family 10 [ 56.102151] Segment Routing with IPv6 [ 56.102297] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2023-09-23-22:10-debug initialized [ 56.106474] md1: detected capacity change from 0 to 2147418112 [ 56.136840] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 56.188835] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 56.195260] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 56.224576] Intel(R) Gigabit Ethernet Linux Driver - version 5.4.6 [ 56.231733] Copyright(c) 2007 - 2020 Intel Corporation. [ 56.262695] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.9.4 [ 56.270434] Copyright(c) 1999 - 2020 Intel Corporation. [ 56.283148] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 56.297401] zram0: detected capacity change from 0 to 2468347904 [ 56.318106] Adding 2410492k swap on /dev/zram0. Priority:1 extents:1 across:2410492k SS [ 56.330790] zram1: detected capacity change from 0 to 2468347904 [ 56.354163] Adding 2410492k swap on /dev/zram1. Priority:1 extents:1 across:2410492k SS [ 56.366819] zram2: detected capacity change from 0 to 2468347904 [ 56.405165] Adding 2410492k swap on /dev/zram2. Priority:1 extents:1 across:2410492k SS [ 56.416844] zram3: detected capacity change from 0 to 2468347904 [ 56.479964] qed_init called [ 56.483764] QLogic FastLinQ 4xxxx Core Module qed 8.59.6.0 [ 56.490725] creating debugfs root node [ 56.508692] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.59.6.0 [ 56.518129] Adding 2410492k swap on /dev/zram3. Priority:1 extents:1 across:2410492k SS [ 56.570840] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.715.8 ($DateTime: 2020/08/17 18:31:34 $) [ 56.581469] creating debugfs root node [ 56.740029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 56.748574] ehci-pci: EHCI PCI platform driver [ 56.753350] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 56.758656] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 56.766114] ehci-pci 0000:00:1a.0: debug port 2 [ 56.774635] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 56.781536] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3c000 [ 56.795090] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 56.801347] hub 3-0:1.0: USB hub found [ 56.805199] hub 3-0:1.0: 2 ports detected [ 56.809991] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 56.815296] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 56.822820] ehci-pci 0000:00:1d.0: debug port 2 [ 56.831306] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 56.838209] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e3b000 [ 56.850090] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 56.856347] hub 4-0:1.0: USB hub found [ 56.860164] hub 4-0:1.0: 2 ports detected [ 56.867917] uhci_hcd: USB Universal Host Controller Interface driver [ 56.919905] synobios open /dev/ttyS1 success [ 56.925683] Fail to get disk 1 led type [ 56.930962] Fail to get disk 2 led type [ 56.930964] Fail to get disk 3 led type [ 56.930971] Fail to get disk 4 led type [ 56.946798] Fail to get disk 5 led type [ 56.952096] Fail to get disk 6 led type [ 56.957375] Fail to get disk 7 led type [ 56.962620] Fail to get disk 8 led type [ 56.962622] Fail to get disk 9 led type [ 56.962624] Fail to get disk 10 led type [ 56.962630] Fail to get disk 11 led type [ 56.981062] Fail to get disk 12 led type [ 56.985110] 2023-11-22 15:25:3 UTC [ 56.989861] synobios: load, major number 201 [ 56.995575] Brand: Synology [ 56.999783] Model: SA-6400 [ 56.999793] synobios cpu_arch proc entry initialized [ 57.008936] synobios crypto_hw proc entry initialized [ 57.014053] synobios syno_platform proc entry initialized [ 57.095088] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 57.117095] usb-storage 2-5:1.0: USB Mass Storage device detected [ 57.123596] scsi host6: usb-storage 2-5:1.0 [ 57.128026] usbcore: registered new interface driver usb-storage [ 57.135093] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 57.145762] usbcore: registered new interface driver uas [ 57.254449] Got empty serial number. Generate serial number from product. [ 57.262186] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 [ 57.581794] hub 3-1:1.0: USB hub found [ 57.585728] hub 3-1:1.0: 6 ports detected [ 57.589800] Got empty serial number. Generate serial number from product. [ 57.597484] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 [ 57.607718] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa1 [ 57.618270] hub 4-1:1.0: USB hub found [ 57.622201] hub 4-1:1.0: 8 ports detected [ 57.908805] Module [adt7475] is removed. [ 57.919183] Module [hwmon_vid] is removed. [ 58.137477] scsi 6:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 58.146654] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 58.147084] sd 6:0:0:0: [synoboot] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 58.161159] sd 6:0:0:0: [synoboot] Write Protect is off [ 58.166454] sd 6:0:0:0: [synoboot] Mode Sense: 43 00 00 00 [ 58.172459] sd 6:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 58.196004] synoboot: synoboot1 synoboot2 synoboot3 [ 58.203013] sd 6:0:0:0: [synoboot] Attached SCSI removable disk [ 59.934465] alx 0000:02:00.0 eth1: NIC Up: 1 Gbps Full [ 59.939924] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 59.972117] Module [adt7475] is removed. [ 60.063404] Module [hwmon_vid] is removed. [ 60.473001] ext2: synoboot2 mounted, process=synoencvolume [ 60.481681] ext4: synoboot2 mounted, process=synoencvolume [ 60.512786] vfat: synoboot2 mounted, process=synoencvolume [ 60.548190] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 60.560842] synoboot2 unmounted, process=synoencvolume [ 61.171320] 8021q: 802.1Q VLAN Support v1.8 [ 61.454819] md: md2 stopped. [ 61.484101] md/raid1:md2: active with 1 out of 1 mirrors [ 61.492390] md2: detected capacity change from 0 to 21030961152 [ 62.143204] Module [adt7475] is removed. [ 62.159280] Module [hwmon_vid] is removed. [ 65.645110] flashcache_syno: /dev/vg1/volume_1 exclude check success [ 66.785068] raid6: avx2x4 gen() 7478 MB/s [ 66.806065] raid6: avx2x4 xor() 3991 MB/s [ 66.827066] raid6: avx2x2 gen() 7145 MB/s [ 66.848065] raid6: avx2x2 xor() 4395 MB/s [ 66.869067] raid6: avx2x1 gen() 6675 MB/s [ 66.890064] raid6: avx2x1 xor() 4048 MB/s [ 66.911069] raid6: sse2x4 gen() 3865 MB/s [ 66.932068] raid6: sse2x4 xor() 2426 MB/s [ 66.953066] raid6: sse2x2 gen() 4092 MB/s [ 66.974065] raid6: sse2x2 xor() 2447 MB/s [ 66.995068] raid6: sse2x1 gen() 3309 MB/s [ 67.016067] raid6: sse2x1 xor() 2173 MB/s [ 67.020398] raid6: using algorithm avx2x4 gen() 7478 MB/s [ 67.025863] raid6: .... xor() 3991 MB/s, rmw enabled [ 67.030874] raid6: using avx2x2 recovery algorithm [ 67.037807] xor: automatically using best checksumming function avx [ 67.166592] Btrfs loaded, crc32c=crc32c-intel [ 68.350853] BTRFS: device label 2023.11.21-13:13:28 v69057 devid 1 transid 63 /dev/mapper/cachedev_0 scanned by mount (10695) [ 68.362892] BTRFS info (device dm-2): enabling auto syno reclaim space [ 68.369524] BTRFS info (device dm-2): enabling ssd optimizations [ 68.375612] BTRFS info (device dm-2): using free space tree [ 68.381264] BTRFS info (device dm-2): using block group cache tree [ 68.387548] BTRFS info (device dm-2): has skinny extents [ 68.398427] BTRFS info (device dm-2): root of syno feature tree is null [ 71.582720] Synotify use 16384 event queue size [ 71.587781] Synotify use 16384 event queue size [ 72.087538] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 72.732471] ata1.00: configured for UDMA/100 [ 72.736798] ata1 : EH complete [ 72.739896] Invalid parameter [ 72.903216] ext2: synoboot2 mounted, process=synopkicompatsy [ 72.915727] ext4: synoboot2 mounted, process=synopkicompatsy [ 72.922754] vfat: synoboot2 mounted, process=synopkicompatsy [ 72.959588] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 72.975144] synoboot2 unmounted, process=synopkicompatsy [ 74.288639] ata2.00: configured for UDMA/100 [ 74.292985] ata2 : EH complete [ 74.296071] Invalid parameter [ 87.493354] iSCSI:target_core_rodsp_server.c:1008:rodsp_server_init RODSP server started, login_key(213ba3a11353). [ 88.568726] syno_extent_pool: module license 'Proprietary' taints kernel. [ 88.583112] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 88.657758] iSCSI:target_core_device.c:593:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 88.669862] iSCSI:target_core_configfs.c:6124:target_init_dbroot db_root: cannot open: /etc/target [ 88.679873] iSCSI:target_core_lunbackup.c:367:init_io_buffer_head 2048 buffers allocated, total 8388608 bytes successfully [ 89.873980] iSCSI:target_core_file.c:128:fd_attach_hba RODSP plugin for fileio is enabled. [ 89.882341] iSCSI:target_core_file.c:136:fd_attach_hba ODX Token Manager is enabled. [ 89.890200] iSCSI:target_core_multi_file.c:126:fd_attach_hba RODSP plugin for multifile is enabled. [ 89.899348] iSCSI:target_core_multi_file.c:134:fd_attach_hba ODX Token Manager is enabled. [ 89.907738] iSCSI:target_core_ep.c:782:ep_attach_hba RODSP plugin for epio is enabled. [ 89.915752] iSCSI:target_core_ep.c:789:ep_attach_hba ODX Token Manager is enabled. [ 90.861827] iSCSI:qla_dbg.c:2572:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.02.00.103-k. [ 91.442369] The mempool could be used by other devices [ 91.828782] ext2: synoboot1 mounted, process=syno_bios_log_c [ 91.859900] ext4: synoboot1 mounted, process=syno_bios_log_c [ 91.907407] vfat: synoboot1 mounted, process=syno_bios_log_c [ 91.991823] FAT-fs (synoboot1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 92.045526] synoboot1 unmounted, process=syno_bios_log_c [ 93.057033] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 98.575998] fuse: init (API version 7.32) Haswell, which is an old device, is said to be impossible to debug, but I am uploading the results of dmesg -w for reference. I tested it with the last test build you shared.

RedPill TinyCore Loader Installation Guide for DSM 7.1 BareMetal

Peter Suh replied to Peter Suh's topic in Tutorials and Guides

You've grown the problem too far out of hand. It seems that Synology experts have tried the method not recommended. The first thing I mentioned was disk hibernation. This should not be attempted. Moreover, power saving on USB disk is even worse. If you have no choice but to use an external disk, Synology recommends ESATA instead of USB interface. It seems risky to you to proceed with building the DS3622xs+ 7.2-64570 with a USB disk. You said you have a N54L, do you have 4 internal HDDs and 2 USB HDDs? Remove the USB-type HDD even now so that it does not participate in DSM update. Only 4 built-in SATA HDDs can be used to stably update, and USB HDDs can be installed afterwards. (I recommend avoiding it if possible.) As far as is known, N54L with old AMD CPU is said to work only in Jot. Last time I finished distributing Jot available on 7.2-64570 on M SHELL, and on page 34 of this topic you responded that you put the new feature to good use. I don't understand why it has to stay at 7.2-64561 again now. Wasn't the migration from DS3622xs+ to 7.2-64570 successful last time? Please let me know what I am misunderstanding.

June 12, 2023
1,034 replies
- redpill
- tinycore
- (and 3 more)
  Tagged with:
  - redpill
  - tinycore
  - tutorials
  - baremetal
  - dsm 7.1

RedPill TinyCore Loader Installation Guide for DSM 7.1 BareMetal

Peter Suh replied to Peter Suh's topic in Tutorials and Guides

I haven't tried changing the disk hibernation mode myself. I didn't think to try it because I only knew that it had a bad effect on disk life. I only know that there is a way to apply it since DSM 7.2.

June 8, 2023
1,034 replies
- redpill
- tinycore
- (and 3 more)
  Tagged with:
  - redpill
  - tinycore
  - tutorials
  - baremetal
  - dsm 7.1

ARPL 1.1-beta1 problem

IG-88 replied to SpiderPOH's topic in GERMAN

schau dir die logs an, evtl. kann man da etwas sehen außerdem wäre zu hinterfragen ob es wirklich das system steht oder du nur nicht mehr über netzwerk dran kommst falls du irgendwas mit power schedule aktiv hast abschalten, bei hdd hibernation auch alles abschalten ich würde einen extra usb stick und einzelplatte nehmen und mal mit dem gleichen system (1621?) eine frische installtion mit defaults versuchen, wenn sich das reproduzieren lässt mal auf 3622 wechseln und sehen oh es da auch passiert, von usb booten und ein hardware stress test programm 1-2 tage laufen lassen um zu sehen ob es da etwas gibt wenn der ram 2 riegel sind dann mal nur mit einem versuchen und dann den anderen, netzteil wechseln wenn möglich (wenn man eins hat sind das nur ein paar handgriffe)

HDD doesn't hibernate / TCRP 0.9.3.0 / DSM 7.1.1-42962 update 2 / HP microserver gen8

Keli replied to mandgeo's topic in DSM 7.x

Same here.. I can't seem to get the drives to hibernate and by extension the whole system via the 'auto poweroff' feature. Things I've tried so far: Editing the file '/etc.defaults/syslog-ng/patterndb.d/scemd.conf' so that '/var/log/scemd.log points to /dev/null' Using hdparm -Y /dev/sdx to put the drives on standby mode - they quickly resume, even drives not used by DSM (Uninitialized) Tried this supposed solution - it didn't work Wiped the drive clean and reinstalled DSM from scratch then tested with only the default apps installed Specs of my system: Motherboard: Gigabyte GA-H61M-DS2 Processor: i5-3470 Drive: Hitachi HTS541680J9SA00 Loader: tinycore-redpill-uefi.v0.9.4.0 Platform: DS3622xs+ DSM Version: DSM 7.1.1-42962 Update 3 (Manually updated from Update 1 via ./rploader.sh postupdate) Something else I tried.. I ran 'cat /sys/power/state' which returned 'disk' meaning that system hibernation is supported. Naturally I ran 'echo disk > /sys/power/state' as root which put the system into hibernation, so it works! I was able to wake it up with a magic packet with a notification popping up that the NAS was shutdown improperly. My scemd.log is full of these errors which get logged every few seconds as from the screenshot below.

Hibernation doesn’t work

Sak1s replied to Musyanon's topic in Packages & DSM Features

Hello @asheenlevrai I am quite sure that hibernation just only spins down the disks . I think the original synology hardware use special sensors for controlling the fan speed via pwm, so in that way you have to build additional kernel modules according you motherboard and modify the DSM scripts that controls the fan speed (better check your motherboard bios for quiet mode or similar powersave modes) I checked this symlink with DS3617xs and DS3622xs+ and it worked fine. As for the update from DSM7.1.0-42661 to DSM7.1.1-42962 , you can manually update to DSM7.1.1-42962 , boot to TCRP loader and run ./rploader postupdate in order to recreate initrd and patch the kernel image but i lack of such an experience .

January 2, 2023
15 replies
- 2
- 6.2.3
- 6.x.x
- (and 3 more)
  Tagged with:
  - 6.2.3
  - 6.x.x
  - 6.x
  - qnap
  - dsm

Tutorial: Install/Migrate to DSM 7.x with TinyCore RedPill (TCRP) Loader

asheenlevrai replied to flyride's topic in Tutorials and Guides

Hey What is the current status about hibernation? supported? broken? Thanks

January 2, 2023
158 replies
- install
- tinycore
- (and 4 more)
  Tagged with:
  - install
  - tinycore
  - upgrade
  - migrate
  - redpill
  - tcrp

Hibernation doesn’t work

asheenlevrai replied to Musyanon's topic in Packages & DSM Features

Hello @Sak1s Is this trick "universal"? I need to enable hibernation on the following rig: - DS3622xs+, TCRP 0.9.3 with friend, DSM7.1.0-42661 (I'd like to upgrade DSM7.1.1-42962 if that's possible, still looking into it) - bare metal - Asus MB with Z77 chipset - i7-3770 (Ivy Bridge) Does hibernation only spin down the disks or can it also stop the fans? (case fans, CPU fan, ...) Thanks -a-

January 2, 2023
15 replies
- 6.2.3
- 6.x.x
- (and 3 more)
  Tagged with:
  - 6.2.3
  - 6.x.x
  - 6.x
  - qnap
  - dsm

Advise pls

blindspot replied to JoseM's question in General Questions

Hi. From my point of view: Question 1. I would go with jbod. I think you know that raid is not a replacement for backup and raid 5 will wear ssd faster so if you have backups, the chance for one ssd to fail, if they are from a good known brand, it's unlikely. I have a jbod with 2 and 4 tb ssd and it's doing fine. You can also install Petaspace, make storage pools and volume for each ssd and create a shared folder with Petaspace so that all ssd will be like one volume. With Petaspace, all data will be spread across all ssds, like one file on 1st ssd, second file on 2nd and so on. With jbod data is filled till the disk is full, then it moves to the second one. Question 2. You can make any storage pool you need, but be advised, when created, all data stored will be deleted Question 3. exFat is supported on external drives only. Internal you can have either btrfs or ext4. Btrfs is mandatory for virtual machine. Question 4. AFAIK transcoding is available on DS918 only, which is a great platform, you can have as many disk as you like (almost, max is 24, i think) One important aspect is hdd/ssd hibernation, so that drives wont spin/work all the time, check scemd log for errors.

DSM 7.1-42661 Update 2 / HDD Hibernation Issues

Stefano replied to Stefano's topic in General Post-Installation Questions/Discussions (non-hardware specific)

Hi Sak1s, you were right. Two days ago I have completely wiped my previous NAS installation (also the HDD drives). I have then installed a clean DSM 7.1.1 Update 2 release and I have only followed your mod advice. I have monitored today HDD hibernation and it worked perfectly, I don't have problems related to DSM webpage anymore. Thank you for your help

DSM 7.1-42661 Update 2 / HDD Hibernation Issues

Sak1s replied to Stefano's topic in General Post-Installation Questions/Discussions (non-hardware specific)

Hi Stefano , i have the feeling that the problem with the "white page" is not relative with the symlink of scemd.log . From my little experience with the DSM7 ,never happen to me . More over, i had install more than 40times DSM on a lenovo PX4-400D, with different versions, just to check if that my system is stable and which version of DSM is more accurate Also in most cases , i was just logged in to webpage to see that disks just wake up from hibernation . Do you try to ping your machine when you have a blank page or Open Google chrome developer Console ? Also check the nginx logs under /var/log/nginx/error.log

DSM 7.1-42661 Update 2 / HDD Hibernation Issues

Stefano replied to Stefano's topic in General Post-Installation Questions/Discussions (non-hardware specific)

Hi sak1s, I have tried your advice. It seems now the HDD hibernation is working fine!! But now It happens that If I try to login to the nas on the usual webpage I have instead a white page…. This seems to happen after a while (I don’t understand if suddenly after the first hdd hibernation or later..) the shared folders continue to work but no login page. I have to shutdown the nas through power button. I have latest dsm 7.1.1 update 2 on my HP N40L with tcrp 0.9.3.0

Automated RedPill Loader (ARPL)

vasiliy_gr replied to fbelavenuto's topic in Loaders

...And finally I found a way how to revert my test NAS back to beta7. I will not repeat again all this long story... Only outline. At first stage I installed successfully beta3 on four NAS-es. On second stage I upgraded all of them internally in ARPL from beta3 to beta6 and from beta6 to beta7. And the third stage was a disaster: I upgraded from beta7 to beta8, also beta9, also tried direct image download from github - and I received kernel panic (or other way of unworking DSM) on all the beta-s above beta3. And beta3 has absolutely unworking hibernation. And the only one NAS where I can study hibernation was stuck on beta3... But I have other NAS-es with beta7! So I copied good image of beta7 from one of the other NAS-es, copied it over the network and run instead of beta3. At least you should change in this variant two things - SN and MAC. New SN can be generated randomly. MAC i took from the previous value of MAC on this NAS. More than that ARPL starts even in "configure" variant not with hardware MAC but DSM MAC. So two NAS-es have the same MAC... It is not good for network activity on both of them. So it is better not to run NAS-donor before reconfiguring NAS-patient (at least new/old MAC should be entered). After these two changes (SN and MAC) make other changes if needed (I changed maxdisks). Build loader, boot loader. And everything is working... It take me a lot of time because at first I forgot about MAC. Then it was surprise for me that ARPL starts "configure" with MAC of the other NAS - so I had two NAS-es with equal MAC-s on network. And after understanding and solving this problem - everything was fine. Anyway... Now I have again beta7 on four NAS-es. But I tried previously beta7 on the same NAS - it was kernel panic... So these two beta7 are different.

Automated RedPill Loader (ARPL)

vasiliy_gr replied to fbelavenuto's topic in Loaders

New investigation. Sorry - without pictures. Lets start with history. I installed beta3 (previously was tcrp). No problems except hibernation. And on beta3 I can't force my hdd-s hibernate at all. So later I installed from internal arpl upgrade menu version beta6. There were some issues with kernel panic, but they could be solved by DSM reboot. Soon I got beta7, so I don't know much on beta6. I installed beta7 from beta6 (that was installed from beta3) internally through menu. And all above I did on four NAS-es wih very similar characteristics. All of them have Proxmox, 12th generation of Intel CPU-s and Z690 m/b-s from Asus with 64 or 128 GB of RAM (minus something for Proxmox), disabled SATA controller, 9300 or 9400 SAS HBA instead. Also all of them are DS3622xs+ with the latest DSM. And historicaly they had finally beta7. The new part is only about one NAS. At first I tried to install new versions internally. After bad results with upgrade procedure, I downloaded images from github, made some settings and tried DSM. My settings: 9p, lsutil - in Addon menu, SataPortMap=18 and DiskIdxMap=1B00 in Cmdline menu. And of course previously - DS3622xs+, latest/upper DSM, random SN. Then - build loader - boot. beta3 - no problems at all. But no hibernation at all. beta4 - no network, only localhost available. beta5 - no "Boot" item in menu.sh after building DSM kernel. So I did exit and reboot manually. I saw grub menu but it refused to boot beyond red lines. So no DSM here too. beta6 - it was the second best result after beta3... It loaded DSM as restore session. I did restore. It rebooted. And - kernel panic... beta7 - kernel panic. beta8 - kernel panic. beta9 - kernel panic. To some up: the last working loader in my configuration is beta3. All loaders above produce unbootable DSM. There may be some way to produce good ARPL above beta3 - using upgrade menu. For example, I managed to do upgade from beta3 to beta6 and later to beta7. But i can't reproduce it, as upgrade menu only upgrades to latest version. And beta8/beta9 produce kernel panic after upgade from beta3 and beta6. So now I have beta3 on only one NAS where I can study hibernate problem (as I have SAS hdd-s there with inverted led logic). And I have beta7 on other NAS-es - but I can't reproduce the way I got this version.

Automated RedPill Loader (ARPL)

vasiliy_gr replied to fbelavenuto's topic in Loaders

So is it possible to install beta7 in DS3622xs+ mode? I ask because I want make some experiments with hibernation, but beta8 and beta9 both make kernel panic in DSM (and I do not know why - may be because of Proxmox, may be because of i5-12400 or may be because of something else). I can't install beta7 from downloaded image (because size error while making DSM kernel). And as for beta3 - there I can't use hibernation at all. The question is - can I download beta7 image, make some settings, try to make DSM kernel - obtain error, exit, some commands in command-line, again menu.sh and build kernel without error?..

Hibernation doesn’t work

Sak1s replied to Musyanon's topic in Packages & DSM Features

hello everyone, try the following : Connect with ssh as root and force a symlink i use DSM 7.1.1-42962 Update 2 and disk hibernation works

December 13, 2022
15 replies
- 6.2.3
- 6.x.x
- (and 3 more)
  Tagged with:
  - 6.2.3
  - 6.x.x
  - 6.x
  - qnap
  - dsm

Automated RedPill Loader (ARPL)

vasiliy_gr replied to fbelavenuto's topic in Loaders

It is difficult. As I installed finally beta3 to make this NAS functioning. And I will not try beta8 on 3 other NAS-es, as I do not know how to install beta7 again (after beta8) that is actual there now. So I prefer someone else to do this achievement. And I will continue with hibernation, as it is more important for me.

Automated RedPill Loader (ARPL)

vasiliy_gr replied to fbelavenuto's topic in Loaders

On new 1.0-beta8 - Kernel Panic. On old 1.0-beta7 - "No space left on device". On old 1.0-beta3 - hibernation does not work. So there is no working variant at all... What shall be done? Previously I downloaded beta6 with upgrade internally to beta7. Now it is impossible because of beta8...

Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs

IG-88 replied to IG-88's topic in Additional Compiled Modules

i can't say much about the asm1166, used mine just for testing a little, as i had the jmb585 earlier, it was working fine and i only use 4 of the 5 ports so had no need for 6 ports i've not seen any negative comments about asm1166 and also seen people here using it https://xpenology.com/forum/topic/65408-automated-redpill-loader-arpl/?do=findComment&comment=382342 considering this https://xpenology.com/forum/topic/63475-dsm-7-proxmox-hdd-hibernation-issue/?do=findComment&comment=303430 the asm1166 might be a better choice with synology's kernel as they did not have a special fix in there kernel as it seems to be the case for jmb585 but i never looked into the kernel code belonging to this, might be something unimportant for normal use my two jmb585 run fine for over 2 years now

HDD doesn't hibernate / TCRP 0.9.3.0 / DSM 7.1.1-42962 update 2 / HP microserver gen8

mandgeo replied to mandgeo's topic in DSM 7.x

No solution. I've managed to stop loging oob errors in message, but drives doesn't sleep. Test made today. Hibernation set to 10 minutes. iostat from 60 to 60 seconds and believe me that i have mode than 10 readings showing zero activity on sda, sdc &sdd. The result is active status, zero hibernation. If I remember well, sdc&sdd are part of raid 1 array. External hard drives are showing stanby. So, after this test, I can only conclude that the problem is not related with logs.

Search the Community

Search By Tags

Search By Author

Content Type

Forums

Find results in...

Find results that contain...

Date Created

Start

End

Last Updated

Start

End

Filter by number of...

Minimum number of replies

Minimum number of views

Joined

Start

End

Group

About Me