painkiller895

Link is down

QNAP has some nice cpu and hardware boxes but there OS Sucks ! QNAP box with Synology DSM software yes ! Synology needs to step it up, put in a intel or ryzen cpu with 6 cores 12 threads and 16 GB of ram... Would be nice someone would build a NAS software similar to DSM... Xpenology Rocks ! but these up dates are a killer to some. I'm running Xpenology on a Ryzen 5 2600 cpu with 16 GB of ram and 4 8 tb hard drives it ROCKS ! I also have Xeon 6 core boxes also running. Hope this is not the end of Xpenology. BTW I also have 2 Synology boxes a ds214 play and a ds920+ . Also running OMV, TrueNas and FreeNas, 1 Qnap box. Just my 2 cents...

While reading Important Upgrade Notes: I found this : USB devices (Wi-Fi dongle, Bluetooth dongle, 3G/4G dongle, USB DAC/speaker, and DTV dongle) are no longer supported. If your Synology NAS is currently connected via a wireless dongle, it will be disconnected after the update. Could this be the cause that we can't update from DSM 6.2.3-25426 and above due to the update breaking all USB devices, so that means the Loader will not load ! Hmmmm What do you think ?

Go to the first page on this topic

Going to test it, do I still have to empty /lib/modules/updates ?

I reflashed the USB with no extra and it updated to DSM 6.2.3-25426 Recoverd -- Do you want me to still empty /lib/modules/updates/, while still running remove usb and replace the original extra.lzma with the new 0.11.1, put back the usb and reboot ??? The system is back up and running with no extra. please advise... thanks for getting me back up.

I was using 6.2.2-24922 update 4 all was working well untill update

I tried to update my dell R320 and Failed.... Nic is a Broadcom NetXtreme Raid controller PERC H310 Mini Xeon E5-2420v2 I did not build the Raid on the controller I build the raid on the Xpenology system it was working with 4 6TB SAS Drives I did an upgrade and system can't be found I was using DS3617 1.03b 6.2 I updated my loader with 1.03b ds3617 DSM 6.2.3 v0.11.1 this did not work. any Drivers for this system ??? I dont want to loose 8TB of data I have on there... Thanks in advance ...

Thanks ! It's working on a fresh install ... Your the best !

bnx2/bnx2x firmware looks like its not working - loader 1.03b ds3617 DSM 6.2.3 v0.11.1- where is this it's not listed...

I have used these loader 1.03b DS3617 with my Dell R410 and it does not work can't find my system on network. I had try to upgrade to 6.2.3-25426 and it FALED What DS3617 Loader should I use ? I was using the DS3617 6.2.2 loader. Please help thanks... BTW I also used the extra 0.5 and that did not work.

Check the speed of the sticks, they must match - also they all must be ECC or Non-ECC can't mix that also.

Can a loader be made for this to try if possible ???

Just a quick question : I bought a 6 tb seagate SAS drive . Will this work with this version of DS3617 1.03b ???

running UEFI bios ? it must be used for DS918+ Loader 1.04b so it can work...

nope all working well as for plex !

Yes sir ! This will bring my R710 and R410's back to life....

Neither worked for me using ds3615 1.03b

Good news and Bad news: Bad News is that my Dell R410 Intel E5620 2.4 gz did not work using your loader, was not found on the network. I had an Intel nic installed also Good News it worked on my Dell 990 migrated from ds3615xs to ds3617xs Thanks I keep you updated as I keep testing, BTW what are the specs on your R410 ? Did you add a Intel nic ? Thank you to all on the board and Happy New years to all !

Sure send it and I'll try and see if it works... Thanks...

so I would have to add the new extra.lzma 0.5 for ds3617 to work ? The Broadcom NetXtreme II 5716 - driver bnx2.ko is not working for me. I had added a Intel nic to get DS3615 to work on the 3615xs 6.1.7.51284

What nic are you using with this, did you add extra.lzma to the ds3617 loader ?

Try one of these Dell Intel PRO 1000 PT Dual Port PCIe x8 Gigabit Ethernet Network Card G174P or OEM Dell G174P Intel Pro/1000 PT Dual Port Gigabit PCI-E Network Card You can get this on ebay these worked for me...

it should work, try the 1.04b loader first. Let us know how it goes...