painkiller895

Possibility of driver extension for jun 1.02b/3617xs Please ? So I can migrate my Dell R710 ...

Oh BTW ramdisk for 3617 possible ?

Wow 5000 + views here impressive: Just an update guys with the new extra.lzma v3 I was able to update both machines to the latest 1.02b loader. Great work ! Thanks a million. Will keep you update if anything develops... Thanks again...

ok let me know when it's done so I can try the Loader I'm not able to compile it myself. I'll test what ever you can do and give you the results... thanks again. BTW I also tried it on a Dell 2950 with the same results... root@192.168.1.20's password: root@test2970-20:~# dmesg | grep "eth" [ 0.295201] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88043d863b50), AE_NOT_FOUND (20130328/psparse-537) [ 2.721664] usbcore: registered new interface driver ethub [ 15.431529] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 15.495427] bnx2 0000:03:00.0 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:1e:c9:53:1d:5b [ 15.498871] bnx2 0000:07:00.0 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:1e:c9:53:1d:5d [ 17.017015] bnx2 0000:03:00.0 eth0: using MSI [ 17.017112] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.259014] bnx2 0000:07:00.0 eth1: using MSI [ 17.259060] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 20.245114] bnx2 0000:03:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full duplex [ 20.245202] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready root@test2970-20:~# This is on the Dell 2950

yes sir

Nope did not work...

Where can i download this loader ? Thanks for the help. Edit: got it, going to try the 1.0.2a keep you updated ....

Sorry but I don't have access to that at the moment...

I'm using DS3615xs DSM 6.0.2-8451 Loader Jun's 1.0.1 This is working, Loader 1.0.2b is not.... root@Test220:~# dmesg | grep "eth" [ 2.905525] usbcore: registered new interface driver ethub [ 18.591159] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 18.643805] bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr 78:2b:cb:44:f6:cd [ 18.644462] bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr 78:2b:cb:44:f6:cf [ 18.645138] bnx2 0000:02:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr 78:2b:cb:44:f6:d1 [ 18.645832] bnx2 0000:02:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr 78:2b:cb:44:f6:d3 [ 20.000263] bnx2 0000:01:00.0 eth0: using MSIX [ 20.000469] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.065864] bnx2 0000:01:00.1 eth1: using MSIX [ 20.065931] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 20.207771] bnx2 0000:02:00.0 eth2: using MSIX [ 20.207806] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 20.760031] bnx2 0000:02:00.1 eth3: using MSIX [ 20.760070] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 22.769387] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full duplex [ 22.769478] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready root@Test220:~# ^C root@Test220:~#

Thanks for the response, The problem is I want to update the system. I make the usb stick with bootloader 1.02b I boot it and I get the boot loader screen it loads up and I have no network connection and the hard drive lights all go off and never come back on. So I guess the controller is not being detected also. I using the same serial and mac number on both loaders and the same usb stick also. That's the problem I have having... BTW: I'm using Loader Jun's-1.0.1 6.0.2.1-8451

No problem, Did you get it working ???

I did this and got it working with that Loader 1.01 now can Loader 1.02b please be updated with the same drivers so we can update our DSM to the latest please....Also I would like to migrate from ds3615 to ds3617 with a new fresh updated loader. Hope I'm not asking for too much. As always thank you very much for the hard work you guys have done!

I'm running ESXI 6.5 on my R710 with no issues, the only warning I get is that this CPU might not get support for the next versions. I'm using loader Jun's 1.02b on DS3617, if you want to learn how to do it, do some reading, search bar is very helpful... Keep us updated...

I have DS3617 running on EXSI 6.5 as a virtual machine, it works well. I want to install it on bare metal how do you setup the controller to work or pass thu ? So it can see my 8 2.5 1 TB hard drives ? Braodcom network card , can anyone make a boot loader that will work with this? Say they got it working with 5.2 and 6.0 I'm going to try and see what happens, I'm updating my R710 to the latest firmware and see what gives. Keep ya updated...

Go to update & Restore on the top you will see RESET click on that and follow directions Hope this helps...

Has anyone been able to use the Jun's 1.02b loader to run the R710 yet ? If so what are you using DS3615 or DS3617 please advise.

Can you make one of these using the DS916 and DS3617 image for VMware please. Also how would you change the serial number or mac number on a VMWARE image, like the one you made above. I tried your ovf image and it worked great on my VMWARE server. I would like to change it so I can use the same image on another server, please advise thanks....Great work guys! I have tried using the ISO files posted and they don't boot in the VMWARE if used as a cd for installing...