Peter Suh Posted July 25, 2022 Share #1 Posted July 25, 2022 DVA3219 Jot Mode is released by user request. Denverton platform-based surveillance equipment such as the DVA3221. It is for 4 bays like the captured image. In jun mode, bugs have not been caught yet, so only jot mode is released first. TC Original does not support it, and can only be built with my M Shell. Below is how to download. curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" -O; tar -zxvf my.sh.gz; ./my.sh DVA3219 For VMs that require additional drivers, etc. You can use it as ./myv.sh DVA3219 And you will surely meet the infinite recovery mode. then Please take care of it like this. sudo ./my.sh DVA3219 postupdate ---------------------------------------------------------------------------------------- Usage: ./my.sh <Synology Model Name> <Options> Options: postupdate, noconfig, noclean, manual, realmac - postupdate : Option to patch the restore loop after applying DSM 7.1.0-42661 Update 2, no additional build required. - noconfig: SKIP automatic detection change processing such as SN/Mac/Vid/Pid/SataPortMap of user_config.json file. - noclean: SKIP the 💊 RedPill LKM/LOAD directory without clearing it with the Clean command. However, delete the Cache directory and loader.img. - manual: Options for manual extension processing and manual dtc processing in build action (skipping extension auto detection). - realmac : Option to use the NIC's real address instead of creating a virtual one. Please type Synology Model Name after ./my.sh - for jot mode ./my.sh DS918+ ./my.sh DS3617xs ./my.sh DS3615xs ./my.sh DS3622xs+ ./my.sh DVA3221 ./my.sh DS920+ ./my.sh DS1621+ ./my.sh DS2422+ ./my.sh DVA1622 ./my.sh DS1520+ (Not Suppoted, Testing...) ./my.sh FS2500 (Not Suppoted, Testing..., Has DTC issue) ./my.sh DS1621xs+ ./my.sh RS4021xs+ ./my.sh DVA3219 - for jun mode ./my.sh DS918+J ./my.sh DS3617xsJ ./my.sh DS3615xsJ ./my.sh DS3622xs+J ./my.sh DVA3221J ./my.sh DS920+J ./my.sh DS1621+J ./my.sh DS2422+J ./my.sh DVA1622J (Not Suppoted) ./my.sh DS1520+J ./my.sh FS2500J (Not Suppoted, Has DTC issue) ./my.sh DS1621xs+J ./my.sh RS4021xs+J ((Not Suppoted, Testing...) ./my.sh DVA3219J (Not Suppoted, Testing...) 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted July 25, 2022 Share #2 Posted July 25, 2022 Is this new version introduced for the nVidia 1050 vs 1650 that the DVA3221 has ? I'm asking because I think that using 1050 was possible even with DVA3221 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 26, 2022 Author Share #3 Posted July 26, 2022 7 hours ago, pocopico said: Is this new version introduced for the nVidia 1050 vs 1650 that the DVA3221 has ? I'm asking because I think that using 1050 was possible even with DVA3221 Since it was created by copying the config and exts of your DVA3221 as it is, it will probably work the same. I don't have nVidia 1050 vs 1650 so I can't test it. I'll ask Korean users to test it. 1 Quote Link to comment Share on other sites More sharing options...
Cali0028 Posted July 27, 2022 Share #4 Posted July 27, 2022 +Following! This is interesting, being that I can't install DVA3221. So do you just run those command where? Sorry I am not familiar with the "Jot mode" Quote Link to comment Share on other sites More sharing options...
Cali0028 Posted July 27, 2022 Share #5 Posted July 27, 2022 (edited) 1 hour ago, Cali0028 said: +Following! This is interesting, being that I can't install DVA3221. So do you just run those command where? Sorry I am not familiar with the "Jot mode" Never mind I just saw and just realized that it was a port from DAV3221 which it wont work with my CPU Edited July 27, 2022 by Cali0028 Quote Link to comment Share on other sites More sharing options...
error403 Posted July 27, 2022 Share #6 Posted July 27, 2022 Sure it doesn't work on older CPUs? Would be very helpful. Quote Link to comment Share on other sites More sharing options...
Orphée Posted July 27, 2022 Share #7 Posted July 27, 2022 Sure it doesn't work on older CPUs? Would be very helpful.Try and tell us. Quote Link to comment Share on other sites More sharing options...
bluecatus Posted July 31, 2022 Share #8 Posted July 31, 2022 I tested DVA3219 on vmware: rebooting after it was installed, I faced to error "We've detected that you had moved the hard drives to a new DVA3219..." Please help me out. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 31, 2022 Author Share #9 Posted July 31, 2022 36 minutes ago, bluecatus said: I tested DVA3219 on vmware: rebooting after it was installed, I faced to error "We've detected that you had moved the hard drives to a new DVA3219..." Please help me out. As I have already explained above, Have you tried running the script below by going back to TC linux? And you will surely meet the infinite recovery mode. then Please take care of it like this. sudo ./my.sh DVA3219 postupdate Quote Link to comment Share on other sites More sharing options...
bluecatus Posted July 31, 2022 Share #10 Posted July 31, 2022 2 hours ago, Peter Suh said: As I have already explained above, Have you tried running the script below by going back to TC linux? And you will surely meet the infinite recovery mode. then Please take care of it like this. sudo ./my.sh DVA3219 postupdate I got this. Thanks so much. Quote Link to comment Share on other sites More sharing options...
error403 Posted August 7, 2022 Share #11 Posted August 7, 2022 On 7/27/2022 at 11:59 PM, Orphée said: On 7/27/2022 at 10:39 PM, error403 said: Sure it doesn't work on older CPUs? Would be very helpful. Try and tell us. Tried DVA3219 on i7 3770. It didn't boot. So I guess on an FX 8300 it will not work too, due to its age. Quote Link to comment Share on other sites More sharing options...
Orphée Posted August 7, 2022 Share #12 Posted August 7, 2022 Tried DVA3219 on i7 3770. It didn't boot. So I guess on an FX 8300 it will not work too, due to its age.Serial output logs ? Quote Link to comment Share on other sites More sharing options...
error403 Posted August 8, 2022 Share #13 Posted August 8, 2022 I wasn't able to get serial out. But looking at the USB activity (bare metal install), it must be VERY early at boot. 3221 just stops after the line "Starting kernel with SATA boot". I highly assume it's the same here, as it's Denverton too. Quote Link to comment Share on other sites More sharing options...
Orphée Posted August 8, 2022 Share #14 Posted August 8, 2022 Any CPU older than haswell architecture won't run DVA3221/DS918+/etc... It may be the same with DVA3219. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted August 8, 2022 Author Share #15 Posted August 8, 2022 I wasn't able to get serial out. But looking at the USB activity (bare metal install), it must be VERY early at boot. 3221 just stops after the line "Starting kernel with SATA boot". I highly assume it's the same here, as it's Denverton too.This topic will help.https://xpenology.com/forum/topic/61634-dsm-7x-loaders-and-platforms/Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
error403 Posted August 9, 2022 Share #16 Posted August 9, 2022 Thank you, I know that chart. Also it reads Quote FMA3 instruction support required. All Haswell Core processors or later support it. Very few Pentiums/Celerons do (J-series CPUs are a notable exception). Piledriver is believed to be the minimum AMD CPU architecture equivalent to Intel Haswell. So FX 8300 should be supported, but it actually doesn't work. Quote Link to comment Share on other sites More sharing options...
Orphée Posted August 9, 2022 Share #17 Posted August 9, 2022 (edited) 37 minutes ago, error403 said: Thank you, I know that chart. Also it reads So FX 8300 should be supported, but it actually doesn't work. Serial output logs, or it did not happen Currently you can only speculate. If I did the same as you when first trying DVA3221, we maybe would still not have any working loader for it. I bought the necessary stuff to retreive logs, and found there were a kernel panic because of a satadom set to 1 and comparing with already working loader for DS918+ with satadom set to 2, I was able to make it work and requested an update in the github code. So without logs, currently, you can only say "I don't know why it does not work, for me, currently" You may be right, but you may be wrong, we currently don't know. Edited August 9, 2022 by Orphée 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted August 9, 2022 Author Share #18 Posted August 9, 2022 4 hours ago, error403 said: Thank you, I know that chart. Also it reads So FX 8300 should be supported, but it actually doesn't work. When there is no response in nic or when kernel panic is expected, and when it is difficult to check serial port log on bare metal, consider testing in VM as an alternative. You can check the panic log with an easier virtual serial port compared to bare metal. Personally, I found virtualbox easier than proxmox. Checking the log through this virtual serial port will be the minimum clue to solve the problem. Quote Link to comment Share on other sites More sharing options...
error403 Posted August 9, 2022 Share #19 Posted August 9, 2022 You're both totally right, I know, but it's a bit hard to test as I don't have the machine at home and limited equipment at this place. In ESXi it stopped at the very same point. When I emulated a newer CPU in Proxmox it did boot much further, but performance is total crap. When I get access again I will go the virtual route again because of the easier debugging. Quote Link to comment Share on other sites More sharing options...
Bullseye Posted August 11, 2022 Share #20 Posted August 11, 2022 Hi, can anybody explain me how install it ? Im trying on TC-redpill but wont work, im trying on clean debian generate image - also wont work Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted August 15, 2022 Share #21 Posted August 15, 2022 Hey guys, I see that some of the other versions like this DVA use gtx 1050 for the detection and face recognition. Is it possible to use th3 nivdia 1030 instead? Cost effectiveness is what Im looking at. Thanks!! Quote Link to comment Share on other sites More sharing options...
Cali0028 Posted August 15, 2022 Share #22 Posted August 15, 2022 Not sure if anyone else seen this, on the baremetal install, I keep loosing the RTC, and have to hint enter and reboot and go into the loader. Now this is happening on an HP machine. Not sure if anyone else seen this. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted August 22, 2022 Author Share #23 Posted August 22, 2022 Kernel panic caused by application of redpill.ko integrated kernel file was confirmed. It was urgently patched to the original stable version of the kernel. If Jot Mode kernel panic is confirmed, please update again. 1 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted August 30, 2022 Share #24 Posted August 30, 2022 В 25.07.2022 в 17:13, Peter Suh сказал: DVA3219 Jot Mode is released by user request. Denverton platform-based surveillance equipment such as the DVA3221. It is for 4 bays like the captured image. In jun mode, bugs have not been caught yet, so only jot mode is released first. TC Original does not support it, and can only be built with my M Shell. Below is how to download. curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" -O; tar -zxvf my.sh.gz; ./my.sh DVA3219 For VMs that require additional drivers, etc. You can use it as ./myv.sh DVA3219 And you will surely meet the infinite recovery mode. then Please take care of it like this. sudo ./my.sh DVA3219 postupdate ---------------------------------------------------------------------------------------- Usage: ./my.sh <Synology Model Name> <Options> Options: postupdate, noconfig, noclean, manual, realmac - postupdate : Option to patch the restore loop after applying DSM 7.1.0-42661 Update 2, no additional build required. - noconfig: SKIP automatic detection change processing such as SN/Mac/Vid/Pid/SataPortMap of user_config.json file. - noclean: SKIP the 💊 RedPill LKM/LOAD directory without clearing it with the Clean command. However, delete the Cache directory and loader.img. - manual: Options for manual extension processing and manual dtc processing in build action (skipping extension auto detection). - realmac : Option to use the NIC's real address instead of creating a virtual one. Please type Synology Model Name after ./my.sh - for jot mode ./my.sh DS918+ ./my.sh DS3617xs ./my.sh DS3615xs ./my.sh DS3622xs+ ./my.sh DVA3221 ./my.sh DS920+ ./my.sh DS1621+ ./my.sh DS2422+ ./my.sh DVA1622 ./my.sh DS1520+ (Not Suppoted, Testing...) ./my.sh FS2500 (Not Suppoted, Testing..., Has DTC issue) ./my.sh DS1621xs+ ./my.sh RS4021xs+ ./my.sh DVA3219 - for jun mode ./my.sh DS918+J ./my.sh DS3617xsJ ./my.sh DS3615xsJ ./my.sh DS3622xs+J ./my.sh DVA3221J ./my.sh DS920+J ./my.sh DS1621+J ./my.sh DS2422+J ./my.sh DVA1622J (Not Suppoted) ./my.sh DS1520+J ./my.sh FS2500J (Not Suppoted, Has DTC issue) ./my.sh DS1621xs+J ./my.sh RS4021xs+J ((Not Suppoted, Testing...) ./my.sh DVA3219J (Not Suppoted, Testing...) The problem with dva3219, dva3221 is that not all of pascal/turing gpus are supported because of an old driver in Nvidia Runtime Library spk. Current driver used for both dva3221 and dva3219 is 440.44 which is old since it was released in late 2019, many pascal and turing gpu revisions (for example with gddr6 memory) were released after this driver. Once synology updates drivers or a way to edit/replace drivers in ssh will be found things will be more interesting ) Quote Link to comment Share on other sites More sharing options...
rok1 Posted August 30, 2022 Share #25 Posted August 30, 2022 39 minutes ago, dimakv2014 said: The problem with dva3219, dva3221 is that not all of pascal/turing gpus are supported because of an old driver in Nvidia Runtime Library spk. Current driver used for both dva3221 and dva3219 is 440.44 which is old since it was released in late 2019, many pascal and turing gpu revisions (for example with gddr6 memory) were released after this driver. Once synology updates drivers or a way to edit/replace drivers in ssh will be found things will be more interesting ) My GTX 1650 Super has 4gb of DDR6 and works fine on DVA3221 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.