dimakv2014 Posted July 17, 2022 Share #151 Posted July 17, 2022 (edited) SUCCESS BAREMETAL (with AI working) Special thanks to pocopico for hard work on a project, help and support PC specs: MiniPC Vinga V500 CPU - Celeron J4125 (Geminilake) GPU - iGPU Intel UHD600 NIC1 (Onboard) - Intel i215-V NIC2 (USB) - Tplink UE300 (RTL8153) Installation: 1. In Rufus created MicroSD(SanDisk) bootable TC img (tinycore-redpill.v0.9.0.2.img) 2. Booted to TC (using NIC1) from MicroSD card, then ifconfig in console to find out ip (may need the correction of date, time and ip configuration) 3. SSH to TC from other pc and ran commands: ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh satamap ./rploader.sh serialgen DVA1622 realmac ./rploader.sh ext dva1622-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8152/rpext-index.json ./rploader.sh build dva1622-7.1.0-42661 ./rploader.sh backup now; sudo reboot 4. Switched to USB Lan adapter (NIC 2) 5. after 5mins went to browser https://finds.synology.com server was detected 6. when prompted to install DSM used DSM_DVA1622_42661.pat 365mb (7.1-42661 (with Update 1) from official synology download archive Done. AI Works Edited July 17, 2022 by dimakv2014 Added email Notification screen of how dva detected 2 Quote Link to comment Share on other sites More sharing options...
sandro_66 Posted July 18, 2022 Share #152 Posted July 18, 2022 19 часов назад, dimakv2014 сказал: SUCCESS BAREMETAL (with AI working) Special thanks to pocopico for hard work on a project, help and support PC specs: MiniPC Vinga V500 CPU - Celeron J4125 (Geminilake) GPU - iGPU Intel UHD600 NIC1 (Onboard) - Intel i215-V NIC2 (USB) - Tplink UE300 (RTL8153) Installation: 1. In Rufus created MicroSD(SanDisk) bootable TC img (tinycore-redpill.v0.9.0.2.img) 2. Booted to TC (using NIC1) from MicroSD card, then ifconfig in console to find out ip (may need the correction of date, time and ip configuration) 3. SSH to TC from other pc and ran commands: ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh satamap ./rploader.sh serialgen DVA1622 realmac ./rploader.sh ext dva1622-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8152/rpext-index.json ./rploader.sh build dva1622-7.1.0-42661 ./rploader.sh backup now; sudo reboot 4. Switched to USB Lan adapter (NIC 2) 5. after 5mins went to browser https://finds.synology.com server was detected 6. when prompted to install DSM used DSM_DVA1622_42661.pat 365mb (7.1-42661 (with Update 1) from official synology download archive Done. AI Works Good day friend! I have the following configuration: ASRock J4125-ITX motherboard with integrated J4125 processor, 8 gb ram, Western Digital Purple 1 Tb hdd. I have created a bootloader for DVA1622. For some reason, it takes at least 10 minutes to boot the system, and the system itself (local interface, adding cameras, opening various windows, etc.) responds very slowly and seems to freeze. And yet, I added 8 cameras, but for some reason I can only create one task for deep AI analysis or face recognition. It seems that according to the description of the DVA1622 model, you can create up to two such tasks and the specifications of this model coincide with my processor. Does your system freeze? And how many AI tasks can you run on your build? Thank you! Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted July 18, 2022 Share #153 Posted July 18, 2022 (edited) 8 часов назад, sandro_66 сказал: Good day friend! I have the following configuration: ASRock J4125-ITX motherboard with integrated J4125 processor, 8 gb ram, Western Digital Purple 1 Tb hdd. I have created a bootloader for DVA1622. For some reason, it takes at least 10 minutes to boot the system, and the system itself (local interface, adding cameras, opening various windows, etc.) responds very slowly and seems to freeze. And yet, I added 8 cameras, but for some reason I can only create one task for deep AI analysis or face recognition. It seems that according to the description of the DVA1622 model, you can create up to two such tasks and the specifications of this model coincide with my processor. Does your system freeze? And how many AI tasks can you run on your build? Thank you! Dva1622 has only 2 tasks: Face recognition = 2 tasks (only for 1 camera) License plate = 1 task (means you can run 2 cameras for Deep Analitics such as License plate recognition) So everything is right in your system it supposed to be like that P.S. you said for license plate its only 1 in your case, maybe I am mistaken and 1 license plate, and one something else like crowd control but for face recognition its 100% it takes 2 tasks which makes dva1622 for 1 face recognition camera only. With dva3221 however with nvidia gpu its can be 6 cameras since it has 12 tasks. As for slowly, it can be because of hdd, I got it slow at loads too Seagate 5400rpm, yours has 5400rpm as well, on other pc with ssd it runs fast most of the time Edited July 18, 2022 by dimakv2014 Addition 1 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted July 18, 2022 Share #154 Posted July 18, 2022 SUCCESS Baremetal (NO AI) PC specs: Gigabyte Brix GB-BXBT-2807 MiniPC Cpu - Celeron N2807 (2cores Bay Trail) iGPU - Intel HD for Atom 3700 series 4gb - LDDR3 Onboard LAN- Realtek RTL8111G Installation: 1. In Rufus created a bootable TC img (tinycore-redpill.v0.9.0.2.img) on a usb flash drive (Sandisk) 2. Booted to TC from usb flash drive, then used command "ifconfig" in console to find out ip (may need the correction of date, time and ip configuration check these settings) 3. SSH to TC from other pc and ran commands: ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh satamap (put 1 because of error) ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build dva1622-7.1.0-42661 ./rploader.sh backup now; sudo reboot 4. after 5-10mins went to browser https://finds.synology.com server was detected 5. when prompted to install DSM used DSM_DVA1622_42661.pat 365mb (7.1-42661 (with Update 1) from official synology download archive Done. 8 cameras, No AI 1 Quote Link to comment Share on other sites More sharing options...
sandro_66 Posted July 20, 2022 Share #155 Posted July 20, 2022 Dear friend! Thank you so much! You were right. I tried to install an SSD as a second disk and it really helped - everything loads much faster and works stably like 1 Quote Link to comment Share on other sites More sharing options...
sandro_66 Posted July 20, 2022 Share #156 Posted July 20, 2022 В 17.07.2022 в 16:10, dimakv2014 сказал: SUCCESS BAREMETAL (with AI working) Special thanks to pocopico for hard work on a project, help and support PC specs: MiniPC Vinga V500 CPU - Celeron J4125 (Geminilake) GPU - iGPU Intel UHD600 NIC1 (Onboard) - Intel i215-V NIC2 (USB) - Tplink UE300 (RTL8153) Installation: 1. In Rufus created MicroSD(SanDisk) bootable TC img (tinycore-redpill.v0.9.0.2.img) 2. Booted to TC (using NIC1) from MicroSD card, then ifconfig in console to find out ip (may need the correction of date, time and ip configuration) 3. SSH to TC from other pc and ran commands: ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh satamap ./rploader.sh serialgen DVA1622 realmac ./rploader.sh ext dva1622-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8152/rpext-index.json ./rploader.sh build dva1622-7.1.0-42661 ./rploader.sh backup now; sudo reboot 4. Switched to USB Lan adapter (NIC 2) 5. after 5mins went to browser https://finds.synology.com server was detected 6. when prompted to install DSM used DSM_DVA1622_42661.pat 365mb (7.1-42661 (with Update 1) from official synology download archive Done. AI Works I still have one problem. I'd like to install a baremetal build on an HP Pavilion x360 convertable 14-ba103ur ultrabook with an 8th gen Intel I5 processor, 6 GB RAM, a 128 GB M.2 SSD, and a WD Blue 1 Tb hard drive. As a LAN card, I use a TP-Link UE300 USB 3.0 adapter based on the Realtek 8156 chip. When the bootloader is formed with the ./rploader.sh satamap command, a message appears suggesting adding 3 sata drives, and an inscription appears that 1 bad port. In fact, I have 2 devices: an M.2 SSD and a WD Blue 1 tb drive, I choose 2 sata. However, after the formation of the bootloader and loading in the USB way (the first menu item, loading by default), the system reboots and this happens cyclically - an endless reboot. I tried both 1 sata and 3 sata in the satamap command, but this does not help. The assembly was made to download an ultrabook as a DVA1622. Help me please! Thank you! Quote Link to comment Share on other sites More sharing options...
pocopico Posted July 20, 2022 Author Share #157 Posted July 20, 2022 (edited) 2 hours ago, sandro_66 said: I still have one problem. I'd like to install a baremetal build on an HP Pavilion x360 convertable 14-ba103ur ultrabook with an 8th gen Intel I5 processor, 6 GB RAM, a 128 GB M.2 SSD, and a WD Blue 1 Tb hard drive. As a LAN card, I use a TP-Link UE300 USB 3.0 adapter based on the Realtek 8156 chip. When the bootloader is formed with the ./rploader.sh satamap command, a message appears suggesting adding 3 sata drives, and an inscription appears that 1 bad port. In fact, I have 2 devices: an M.2 SSD and a WD Blue 1 tb drive, I choose 2 sata. However, after the formation of the bootloader and loading in the USB way (the first menu item, loading by default), the system reboots and this happens cyclically - an endless reboot. I tried both 1 sata and 3 sata in the satamap command, but this does not help. The assembly was made to download an ultrabook as a DVA1622. Help me please! Thank you! satamap is not useful in your case as dva1622 uses Portmap version2 (aka dts or dtb). since you have an Nvidia gpu maybe you can use TCRP 0.9 and dva3621 Edited July 20, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
lollipop8x Posted July 21, 2022 Share #158 Posted July 21, 2022 How to use LSI SAS 2008 with DVA1622? I can use LSI SAS 2008 with DS918+ / DVA3221 (using ./rploader.sh satamap) However, I cannot use this for DVA1622 (cannot build the fw). Can you pls help me Quote Link to comment Share on other sites More sharing options...
pocopico Posted July 21, 2022 Author Share #159 Posted July 21, 2022 3 hours ago, lollipop8x said: How to use LSI SAS 2008 with DVA1622? I can use LSI SAS 2008 with DS918+ / DVA3221 (using ./rploader.sh satamap) However, I cannot use this for DVA1622 (cannot build the fw). Can you pls help me What is the issue ? ony build logs ? Quote Link to comment Share on other sites More sharing options...
dimammx Posted July 21, 2022 Share #160 Posted July 21, 2022 @dimakv2014 How is stability of the system, how good are AI functions ? Quote Link to comment Share on other sites More sharing options...
Orphée Posted July 21, 2022 Share #161 Posted July 21, 2022 12 minutes ago, dimammx said: @dimakv2014 How is stability of the system, how good are AI functions ? On 7/18/2022 at 7:49 PM, dimakv2014 said: SUCCESS Baremetal (NO AI) The answer is in the quote. Quote Link to comment Share on other sites More sharing options...
dimammx Posted July 21, 2022 Share #162 Posted July 21, 2022 (edited) Well yes and no, he did have a success before . So i was curious how was AI if he got a chance to test it. SUCCESS BAREMETAL (with AI working) Special thanks to pocopico for hard work on a project, help and support PC specs: MiniPC Vinga V500 CPU - Celeron J4125 (Geminilake) GPU - iGPU Intel UHD600 NIC1 (Onboard) - Intel i215-V NIC2 (USB) - Tplink UE300 (RTL8153) Also i think @sandro_66 (i think it was him if i remember correctly ) reported in different thread that he lost a disk after some time on his install, so i also asked about reliability. Edited July 21, 2022 by dimammx Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted July 21, 2022 Share #163 Posted July 21, 2022 3 часа назад, dimammx сказал: @dimakv2014 How is stability of the system, how good are AI functions ? Stable so far, good enough, sometimes recognizes people back, but most of the time its accurate Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted July 21, 2022 Share #164 Posted July 21, 2022 3 часа назад, Orphée сказал: The answer is in the quote. You are correct and dimammx correct, 2 different MiniPCs, look few posts higher for AI ) Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted July 21, 2022 Share #165 Posted July 21, 2022 (edited) 6 часов назад, dimammx сказал: @dimakv2014 How is stability of the system, how good are AI functions ? Here are examples: 1st and 3rd screenshots - 80% of the time (Correct recognition) 2nd Screen incorrect Edited July 21, 2022 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
Orphée Posted July 21, 2022 Share #166 Posted July 21, 2022 (edited) There is some prerequisite to have a good face recognition, like the camera orientation... it have to be not to high, and not watch to the bottom... For better performance, it has to be like at 2 meters, and look less than 15° tilt... https://global.download.synology.com/download/Document/Software/AdminGuide/Package/SurveillanceStation/All/enu/Synology_Face_Recognition_AG_enu.pdf Edited July 21, 2022 by Orphée 1 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted July 21, 2022 Share #167 Posted July 21, 2022 (edited) 15 минут назад, Orphée сказал: There is some prerequisite to have a good face recognition, like the camera orientation... it have to be not to high, and not watch to the bottom... For better performance, it has to be like at 2 meters, and look less than 20° to bottom... https://global.download.synology.com/download/Document/Software/AdminGuide/Package/SurveillanceStation/All/enu/Synology_Face_Recognition_AG_enu.pdf Well its 5m above ground and angled, so at default settings (nothing changed) I would say its pretty accurate. Of course if you give ideal conditions ) 4mp camera and not 2mp like I have, then results will be much better, but I am happy with those results I have, 20% inaccuracy is pretty good for my case P.S. Forgot to mention that those subjects are at 10m distance and still recognizes faces 80% of the time, when they look towards camera from that distance result like 95% recognition Edited July 21, 2022 by dimakv2014 P.S. Quote Link to comment Share on other sites More sharing options...
Orphée Posted July 21, 2022 Share #168 Posted July 21, 2022 I know this is totally useless... but if like me you don't want to have this new C2 cloud bullshit icon in Surveillance Station, you can hide it. sudo vi /var/packages/SurveillanceStation/target/ui/modules/C2Vue/config search for "hidden":false replace with "hidden":true save and reload your SS window. 1 1 1 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted July 21, 2022 Share #169 Posted July 21, 2022 (edited) 19 минут назад, Orphée сказал: I know this is totally useless... but if like me you don't want to have this new C2 cloud bullshit icon in Surveillance Station, you can hide it. sudo vi /var/packages/SurveillanceStation/target/ui/modules/C2Vue/config search for "hidden":false replace with "hidden":true save and reload your SS window. Thx for lifehack, it doesnt bother me that much ) but what is annoying is that for DVA I have camera on dva1622 and connected this dsm with Local Host DSM with other cameras in CMS mode, once it records on motion from DVA camera in recordings there are no videos, I have to click Search, change from Local Host to DVA in order to see recordings from dva, there is no option to select all servers or make dva default not critical but still Edited July 21, 2022 by dimakv2014 Added screens Quote Link to comment Share on other sites More sharing options...
sandro_66 Posted July 21, 2022 Share #170 Posted July 21, 2022 7 минут назад, dimakv2014 сказал: Thx for lifehack, it doesnt bother me that much ) but what is annoying is that for DVA I have camera on dva1622 and connected this dsm with Local Host DSM with other camera, once it records on motion from DVA camera in recordings there are no videos, I have to click Search, change from Local Host to DVA in order to see recordings from dva, there is no option to select all servers or make dva default not critical but still Good afternoon dear friend! Can you please tell me if you were able to receive face recognition notifications in ds cam on your phone (I have Android)? AI functions work in my system, through the web interface I see how face recognition tasks are performed, however, in the corresponding section of DS Cam "Intelligent Recognition Technologies" is empty. Thank you! Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted July 21, 2022 Share #171 Posted July 21, 2022 (edited) 15 минут назад, sandro_66 сказал: Good afternoon dear friend! Can you please tell me if you were able to receive face recognition notifications in ds cam on your phone (I have Android)? AI functions work in my system, through the web interface I see how face recognition tasks are performed, however, in the corresponding section of DS Cam "Intelligent Recognition Technologies" is empty. Thank you! Wrong option, it should be in notifications, your Option on screenshot is Smart Time Lapse which doesnt correspond to anything related with DVA change your phone to English, and you will see English interface of DS Cam and you will see how it differs Edited July 21, 2022 by dimakv2014 Add p.s. Quote Link to comment Share on other sites More sharing options...
sandro_66 Posted July 21, 2022 Share #172 Posted July 21, 2022 13 минуты назад, dimakv2014 сказал: Wrong option, it should be in notifications, your Option on screenshot is Smart Time Lapse which doesnt correspond to anything related with DVA change your phone to English, and you will see English interface of DS Cam and you will see how it differs Thank you! I realized that in the DS Cam program the translation is crooked. In notifications, it turns out that you need to enable the push service, but how did you manage to do this on Xpenology? Doesn't this require Quickconnect? Quote Link to comment Share on other sites More sharing options...
SixthTangerine Posted July 21, 2022 Share #173 Posted July 21, 2022 Hi guys, i have an Intel 11th gen N5105 board, obviously still not supported by XPEnology. Can I install EXSI then install this DVA1622 on exsi VM, will it work?😢 Quote Link to comment Share on other sites More sharing options...
pocopico Posted July 21, 2022 Author Share #174 Posted July 21, 2022 1 hour ago, SixthTangerine said: Hi guys, i have an Intel 11th gen N5105 board, obviously still not supported by XPEnology. Can I install EXSI then install this DVA1622 on exsi VM, will it work?😢 Is it because of the card ? You can use a usb to Ethernet card Quote Link to comment Share on other sites More sharing options...
merve04 Posted July 25, 2022 Share #175 Posted July 25, 2022 Has anyone tried updating dsm 7.1u1 to u3? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.