dimakv2014 Posted September 3, 2022 Share #451 Posted September 3, 2022 (edited) 11 минуту назад, jeffestewart сказал: Thank you The error you saw above was a typo when writing the post. Not part of the command I entered. Also the above command wasn't working. When I ran that command it installed as a DS920+ My system is as follows Xeon E3-1270v3 ESXi 7.0u3 Virtual Machine specs CPU 4 Memory 6GB Hard Disk 1 TinyCore RedPill 0.9.0.2 vmdk (IDE interface) Hard Disk 2 8TB drive for storage Commands i ran ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh satamap ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build DVA1622-7.1.0-42661 auto Pat file I am using was downloaded with the same url found in the ./rploader.sh build DVA1622-7.1.0-42661 auto process https://global.download.synology.com/download/DSM/release/7.1/42661-1/DSM_DVA1622_42661.pat It must be SATA interface for hard disk 1 not IDE. Also you can run commands just like this without satamap ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build DVA1622-7.1.0-42661 Edited September 3, 2022 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
Deninyk Posted September 3, 2022 Share #452 Posted September 3, 2022 (edited) В 30.08.2022 в 17:05, utya сказал: so if the cpu doensn't have graphic cores, there are not ai features? yes, need HD Graphics 530 and new for work Edited September 3, 2022 by Deninyk Quote Link to comment Share on other sites More sharing options...
Joris Posted September 5, 2022 Share #453 Posted September 5, 2022 Hi, I tried to install dva1622 on hp prodesk 400 g2 Intel Core i5-6500T I can find the dva1622 via find.synology.com When i try to upload the firmware it says that the file is corrupted when it try to install the firmware. I did try to download and install it from different computer. Something wrong with the installation or is it more the hardware that is not supported? Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted September 5, 2022 Share #454 Posted September 5, 2022 (edited) 37 минут назад, Joris сказал: Hi, I tried to install dva1622 on hp prodesk 400 g2 Intel Core i5-6500T I can find the dva1622 via find.synology.com When i try to upload the firmware it says that the file is corrupted when it try to install the firmware. I did try to download and install it from different computer. Something wrong with the installation or is it more the hardware that is not supported? This problem was discussed many times in this Topic. Just cpu info is not enough for solving your problem, your cpu as well as igpu is fully supported for DVA and Face Rec. Please provide more info. 1. Baremetal or VM? 2.What ssd interface you use sata or pci-e nvme? 3. How many drives you have did you modify anything in userconfig.json file? 4. Which .pat file are you trying to upload? 5. Which commands did you use to build loader? The more info you provide the faster someone will help 😉 Edited September 5, 2022 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted September 5, 2022 Share #455 Posted September 5, 2022 (edited) В 04.09.2022 в 02:34, Deninyk сказал: yes, need HD Graphics 530 and new for work I can confirm that it works with AI even on HD520 (i3-6100u cpu), some people in this topic reported that it works on hd4400. Edited September 5, 2022 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
Joris Posted September 6, 2022 Share #456 Posted September 6, 2022 9 hours ago, dimakv2014 said: This problem was discussed many times in this Topic. Just cpu info is not enough for solving your problem, your cpu as well as igpu is fully supported for DVA and Face Rec. Please provide more info. 1. Baremetal or VM? 2.What ssd interface you use sata or pci-e nvme? 3. How many drives you have did you modify anything in userconfig.json file? 4. Which .pat file are you trying to upload? 5. Which commands did you use to build loader? The more info you provide the faster someone will help 😉 This is exactly what I did. 1. I do run it baremetal 2. a sata ssd is installed 3. 1 disk (I just want to test dva1622 first) 3.1. I did not change the config file manually 4. I did download different once 7.1-42661 (with Update 1) 7.1-42661 5. This is are the commands I used. ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build dva1622-7.1.0-42661 Then reboot. I find the synology and can upload the firmware but installing does not go well. Before I did install 920+ the same way (but with commands for 920+) and that was working fine. Then I cleared the usb stick and loaded the software for dva1622 Quote Link to comment Share on other sites More sharing options...
Zhyryrk Posted September 6, 2022 Share #457 Posted September 6, 2022 4 часа назад, Joris сказал: 3.1. I did not change the config file manually 4 часа назад, Joris сказал: 5. This is are the commands I used. ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build dva1622-7.1.0-42661 Then reboot. I don't see a ./rploader.sh identifyusb command - for writing to config file your USB drive's VID&PID. 1 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted September 6, 2022 Share #458 Posted September 6, 2022 (edited) 5 часов назад, Joris сказал: This is exactly what I did. 1. I do run it baremetal 2. a sata ssd is installed 3. 1 disk (I just want to test dva1622 first) 3.1. I did not change the config file manually 4. I did download different once 7.1-42661 (with Update 1) 7.1-42661 5. This is are the commands I used. ./rploader.sh update ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build dva1622-7.1.0-42661 Then reboot. I find the synology and can upload the firmware but installing does not go well. Before I did install 920+ the same way (but with commands for 920+) and that was working fine. Then I cleared the usb stick and loaded the software for dva1622 Those commands are good for VM, for baremetal you need identifyusb command like Zhyryrk said. So how is it possible you could possibly see your server in finds.synology.com if you didn't do identifyusb command? Commands should be like this: "./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build dva1622-7.1.0-42661 Sudo reboot" Edited September 6, 2022 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
jeffestewart Posted September 6, 2022 Share #459 Posted September 6, 2022 On 9/2/2022 at 10:14 PM, dimakv2014 said: It must be SATA interface for hard disk 1 not IDE. Also you can run commands just like this without satamap ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build DVA1622-7.1.0-42661 Thank you for the response. I tested on a baremetal machine booting from a usb stick and I am getting the same error. If I start with two new disks, it asks me to confirm that I am ok formatting the disks and the setup process gets to 55% if I reboot and try again it stops at 40%. The baremetal desktop is a basic desktop. System is configured in BIOS mode. USB stick is booting in USB mode. Two hard drives are connected with SATA cables direct to the board. Sytstem config is as follows. EliteDesk 800 G2 Intel Core i7-6700 16GB ram I decided to test on a baremetal machine because most were finding success on a baremetal install. I am not trying to add more variables. Interesting that I am seeing the same result. Quote Link to comment Share on other sites More sharing options...
Joris Posted September 6, 2022 Share #460 Posted September 6, 2022 7 hours ago, dimakv2014 said: Those commands are good for VM, for baremetal you need identifyusb command like Zhyryrk said. So how is it possible you could possibly see your server in finds.synology.com if you didn't do identifyusb command? Commands should be like this: "./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build dva1622-7.1.0-42661 Sudo reboot" It is working now. Previous installation was 920+ with the same usb and ssd. Could it be that something loaded from old installation? Is the operating system only stored on the usb after installation or the disk? Quote Link to comment Share on other sites More sharing options...
jeffestewart Posted September 7, 2022 Share #461 Posted September 7, 2022 Good afternoon. Checking in to see if anyone has any input on my issue. I have attempted to setup and configure on an ESXi virtual machine and a barebones system both with the same result. I am unable to install the .pat file downloaded from Synology. I also copied the .pat file that was downloaded during the setup process from the USB stick and attempted to install with that with no success. I am sure I am doing something wrong as I am getting the same result with two completely different setups. Is there something I should be looking for? The install of DSM stops at either 40% or 55%. I would post the steps I have taken to get to that point but I have tried so many combinations. Thank you again. Quote Link to comment Share on other sites More sharing options...
LukaszN Posted September 14, 2022 Share #462 Posted September 14, 2022 Hello, I manage to install DVA1622 with DSM 7.1.0-42661 on Odroid H2+ (J4105) and everything works fine. It is possible to update to 7.1.1-42962 or make fresh install on 7.1.1-42962? I tried some finded solution method and no luck:( Quote Link to comment Share on other sites More sharing options...
pocopico Posted September 14, 2022 Author Share #463 Posted September 14, 2022 1 hour ago, LukaszN said: Hello, I manage to install DVA1622 with DSM 7.1.0-42661 on Odroid H2+ (J4105) and everything works fine. It is possible to update to 7.1.1-42962 or make fresh install on 7.1.1-42962? I tried some finded solution method and no luck:( Hi, from within Tinycore you need to execute : ./rploader.sh update ./rploader.sh fullupgrade and then you'll be able to build a loader for 7.1.1-42962 (i havent been able to test though DVA1622 yet). 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 14, 2022 Share #464 Posted September 14, 2022 (edited) 53 minutes ago, pocopico said: Hi, from within Tinycore you need to execute : ./rploader.sh update ./rploader.sh fullupgrade and then you'll be able to build a loader for 7.1.1-42962 (i havent been able to test though DVA1622 yet). pocopico, your DS1622 works great. By the way, shouldn't we use the develop branch repo for 7.1.1-42962? Any plans to apply 7.1.1-42962 to the master branch? Edited September 14, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
LukaszN Posted September 14, 2022 Share #465 Posted September 14, 2022 When I tried build fresh install on 7.1.1-4292 a got this errors: Updating extension : dtbpatch contents for model : dva1622_42962 [#] Checking runtime for required tools... [OK] [#] Updating dva1622_42962 platforms extensions... [-] The extension dtbpatch was found. However, the extension index has no recipe for dva1622_42962 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [#] ========================================== dtbpatch ========================================== [#] Extension name: Device tree binary [#] Description: Create your own device tree binary [#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/dtbpatch/rpext-index.json [#] Platforms supported: ds1621p_42218 ds1621p_42951 ds920p_42661 ds920p_42662 ds920p_42962 ds1621p_42662 ds1621p_42661 dva1622_42951 ds2422p_42662 ds2422p_42661 ds2422p_42218 ds920p_42951 ds2422p_42951 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42662 dva1622_42661 ds2422p_42621 ds1621p_42621 ds1621p_42962 [#] ======================================================================================= [-] Failed to update recipe for dtbpatch extension for platform dva1622_42962. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== dtbpatch ========================================== [#] Extension name: Device tree binary [#] Description: Create your own device tree binary [#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/dtbpatch/rpext-index.json [#] Platforms supported: ds1621p_42218 ds1621p_42951 ds920p_42661 ds920p_42662 ds920p_42962 ds1621p_42662 ds1621p_42661 dva1622_42951 ds2422p_42662 ds2422p_42661 ds2422p_42218 ds920p_42951 ds2422p_42951 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42662 dva1622_42661 ds2422p_42621 ds1621p_42621 ds1621p_42962 [#] ======================================================================================= [!] Cannot continue due to previous errors (see above) *** Process will exit *** Updating extension : redpill-misc contents for model : dva1622_42962 [#] Checking runtime for required tools... [OK] [#] Extension redpill-misc index is already up to date [#] Updating redpill-misc extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating dva1622_42962 platforms extensions... [-] The extension dtbpatch was found. However, the extension index has no recipe for dva1622_42962 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [#] ========================================== dtbpatch ========================================== [#] Extension name: Device tree binary [#] Description: Create your own device tree binary [#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/dtbpatch/rpext-index.json [#] Platforms supported: ds1621p_42218 ds1621p_42951 ds920p_42661 ds920p_42662 ds920p_42962 ds1621p_42662 ds1621p_42661 dva1622_42951 ds2422p_42662 ds2422p_42661 ds2422p_42218 ds920p_42951 ds2422p_42951 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42662 dva1622_42661 ds2422p_42621 ds1621p_42621 ds1621p_42962 [#] ======================================================================================= [-] Failed to update recipe for dtbpatch extension for platform dva1622_42962. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== dtbpatch ========================================== [#] Extension name: Device tree binary [#] Description: Create your own device tree binary [#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/dtbpatch/rpext-index.json [#] Platforms supported: ds1621p_42218 ds1621p_42951 ds920p_42661 ds920p_42662 ds920p_42962 ds1621p_42662 ds1621p_42661 dva1622_42951 ds2422p_42662 ds2422p_42661 ds2422p_42218 ds920p_42951 ds2422p_42951 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42662 dva1622_42661 ds2422p_42621 ds1621p_42621 ds1621p_42962 [#] ======================================================================================= [!] Cannot continue due to previous errors (see above) *** Process will exit *** [!] Failed to update all extensions for dva1622_42962 platform - see errors above *** Process will exit *** Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 15, 2022 Share #466 Posted September 15, 2022 When I tried build fresh install on 7.1.1-4292 a got this errors: Updating extension : dtbpatch contents for model : dva1622_42962 [#] Checking runtime for required tools... [OK][#] Updating dva1622_42962 platforms extensions... [-] The extension dtbpatch was found. However, the extension index has no recipe for dva1622_42962 platform. It may not be[-] supported on that platform, or author didn't updated it for that platform yet. You can try running[-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about[-] the extension stored locally:[#] ========================================== dtbpatch ==========================================[#] Extension name: Device tree binary[#] Description: Create your own device tree binary[#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/dtbpatch/rpext-index.json[#] Platforms supported: ds1621p_42218 ds1621p_42951 ds920p_42661 ds920p_42662 ds920p_42962 ds1621p_42662 ds1621p_42661 dva1622_42951 ds2422p_42662 ds2422p_42661 ds2422p_42218 ds920p_42951 ds2422p_42951 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42662 dva1622_42661 ds2422p_42621 ds1621p_42621 ds1621p_42962 [#] =======================================================================================[-] Failed to update recipe for dtbpatch extension for platform dva1622_42962. The script will terminate as you do not[-] have previously downloaded recipe which can be used if download fails. Try again later. If problem[-] persists contact the extension packer for support (displayed below)[#] ========================================== dtbpatch ==========================================[#] Extension name: Device tree binary[#] Description: Create your own device tree binary[#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/dtbpatch/rpext-index.json[#] Platforms supported: ds1621p_42218 ds1621p_42951 ds920p_42661 ds920p_42662 ds920p_42962 ds1621p_42662 ds1621p_42661 dva1622_42951 ds2422p_42662 ds2422p_42661 ds2422p_42218 ds920p_42951 ds2422p_42951 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42662 dva1622_42661 ds2422p_42621 ds1621p_42621 ds1621p_42962 [#] =======================================================================================[!] Cannot continue due to previous errors (see above)*** Process will exit ***Updating extension : redpill-misc contents for model : dva1622_42962 [#] Checking runtime for required tools... [OK][#] Extension redpill-misc index is already up to date[#] Updating redpill-misc extension... [OK][#] Checking runtime for required tools... [OK][#] Updating dva1622_42962 platforms extensions... [-] The extension dtbpatch was found. However, the extension index has no recipe for dva1622_42962 platform. It may not be[-] supported on that platform, or author didn't updated it for that platform yet. You can try running[-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about[-] the extension stored locally:[#] ========================================== dtbpatch ==========================================[#] Extension name: Device tree binary[#] Description: Create your own device tree binary[#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/dtbpatch/rpext-index.json[#] Platforms supported: ds1621p_42218 ds1621p_42951 ds920p_42661 ds920p_42662 ds920p_42962 ds1621p_42662 ds1621p_42661 dva1622_42951 ds2422p_42662 ds2422p_42661 ds2422p_42218 ds920p_42951 ds2422p_42951 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42662 dva1622_42661 ds2422p_42621 ds1621p_42621 ds1621p_42962 [#] =======================================================================================[-] Failed to update recipe for dtbpatch extension for platform dva1622_42962. The script will terminate as you do not[-] have previously downloaded recipe which can be used if download fails. Try again later. If problem[-] persists contact the extension packer for support (displayed below)[#] ========================================== dtbpatch ==========================================[#] Extension name: Device tree binary[#] Description: Create your own device tree binary[#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/dtbpatch/rpext-index.json[#] Platforms supported: ds1621p_42218 ds1621p_42951 ds920p_42661 ds920p_42662 ds920p_42962 ds1621p_42662 ds1621p_42661 dva1622_42951 ds2422p_42662 ds2422p_42661 ds2422p_42218 ds920p_42951 ds2422p_42951 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42662 dva1622_42661 ds2422p_42621 ds1621p_42621 ds1621p_42962 [#] =======================================================================================[!] Cannot continue due to previous errors (see above)*** Process will exit ***[!] Failed to update all extensions for dva1622_42962 platform - see errors above*** Process will exit *** There seems to be a model that pocopico's TCRP rp-ext is not yet ready. Please try using the m shell below before pocopico fixes it. Fully tested.curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" -O; tar -zxvf my.sh.gz;./my.sh DVA1622Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
LukaszN Posted September 15, 2022 Share #467 Posted September 15, 2022 (edited) 4 hours ago, Peter Suh said: There seems to be a model that pocopico's TCRP rp-ext is not yet ready. Please try using the m shell below before pocopico fixes it. Fully tested. curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" -O; tar -zxvf my.sh.gz; ./my.sh DVA1622 Sent from my iPhone using Tapatalk Thank You. Bootloader is created and booted ok but I have problem with LAN. There is no LAN detect. I have R8125 in Odroid H2+ (2.5Gb LAN). Edited September 15, 2022 by LukaszN Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 15, 2022 Share #468 Posted September 15, 2022 27 minutes ago, LukaszN said: Thank You. Bootloader is created and booted ok but I have problem with LAN. There is no LAN detect. I have R8125 in Odroid H2+ (2.5Gb LAN). Check whether the r8125 ext driver is verified with the command below right after the loader build. ls -l *load/c*/e* If the r8125 is not identified, you have to manually add the r8125 ext driver. At this time, change the loader build command as follows. ./myv.sh DVA1622 1 Quote Link to comment Share on other sites More sharing options...
lws8964 Posted September 15, 2022 Share #469 Posted September 15, 2022 What is the build command about fresh install on 7.1.1-4292? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 15, 2022 Share #470 Posted September 15, 2022 2 minutes ago, lws8964 said: What is the build command about fresh install on 7.1.1-4292? Take a look again at the current page, page 19. pocopico's ext driver work is not yet complete. For now, please use my m shell. 1 Quote Link to comment Share on other sites More sharing options...
LukaszN Posted September 15, 2022 Share #471 Posted September 15, 2022 42 minutes ago, Peter Suh said: Check whether the r8125 ext driver is verified with the command below right after the loader build. ls -l *load/c*/e* If the r8125 is not identified, you have to manually add the r8125 ext driver. At this time, change the loader build command as follows. ./myv.sh DVA1622 I need to add driver to 8125 but now is another problem. I build loader with: ./myv.sh DVA1622 add driver and choose 49 (r8125) but I got error: -> Select Number Enter (To select multiple, separate them with , ): 49 Error : Platform not found rploader.sh Maybe I am wrong but it is possible that problem is with model name? Upper case? DVA and dva? On Your script there is DVA and when I build bootloader with pocopico script I must add this driver by: ./rploader.sh ext dva1622-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 15, 2022 Share #472 Posted September 15, 2022 1 hour ago, LukaszN said: I need to add driver to 8125 but now is another problem. I build loader with: ./myv.sh DVA1622 add driver and choose 49 (r8125) but I got error: -> Select Number Enter (To select multiple, separate them with , ): 49 Error : Platform not found rploader.sh Maybe I am wrong but it is possible that problem is with model name? Upper case? DVA and dva? On Your script there is DVA and when I build bootloader with pocopico script I must add this driver by: ./rploader.sh ext dva1622-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json I will correct this error. wait for me. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 15, 2022 Share #473 Posted September 15, 2022 (edited) 1 hour ago, LukaszN said: I need to add driver to 8125 but now is another problem. I build loader with: ./myv.sh DVA1622 add driver and choose 49 (r8125) but I got error: -> Select Number Enter (To select multiple, separate them with , ): 49 Error : Platform not found rploader.sh Maybe I am wrong but it is possible that problem is with model name? Upper case? DVA and dva? On Your script there is DVA and when I build bootloader with pocopico script I must add this driver by: ./rploader.sh ext dva1622-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json There was a typo in the version notation from 7.1.0 to 7.1.1. https://github.com/PeterSuh-Q3/tinycore-redpill/commit/9b971d31be5dcd0c9a2fd3cf511ccb25e7d98522 The error has been identified and the fix has been completed. Execute ./my.sh to update to the latest version. Try using myv.sh again. Edited September 15, 2022 by Peter Suh 1 Quote Link to comment Share on other sites More sharing options...
LukaszN Posted September 15, 2022 Share #474 Posted September 15, 2022 4 hours ago, Peter Suh said: There was a typo in the version notation from 7.1.0 to 7.1.1. https://github.com/PeterSuh-Q3/tinycore-redpill/commit/9b971d31be5dcd0c9a2fd3cf511ccb25e7d98522 The error has been identified and the fix has been completed. Execute ./my.sh to update to the latest version. Try using myv.sh again. Thank You. It is working time. Boot and install:) Time for testing:) 1 Quote Link to comment Share on other sites More sharing options...
Kyar Posted September 15, 2022 Share #475 Posted September 15, 2022 Hello, I have one DS918+ working on Proxmox. I need to add one DVA1622 but it don't work (55% install corrupted files). I have J5040 CPU. I tested : ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh serialgen DVA1622 ./rploader.sh build DVA1622-7.1.0-42661 With or without satamap. I have add virtio driver for my virtio network. My hardware : I tested with a private nagivation, all time 55% installation fail... One idea ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.