Polanskiman Posted October 28, 2016 Share #751 Posted October 28, 2016 (edited) Hello, I read the whole thread I changed the entry in grub.cfg it looks like serial --port = 0x3F8 --speed = 115200 terminal_input serial console terminal_output serial console set default = '0' set timeout = '1' set fallback = '0' menuentry 'Synology DS3615xs' --class os { insmod fat linux / image / DS3615xs / zImage root = / dev / md0 syno_hdd_powerup_seq netif_num = 0 = 0 = 1 HddHotplug syno_hw_version = DS3615xs vender_format_version = 2 vid = pid = 0x0741 0x05e3 console = ttyS0,115200n8 sn = C7LWN09761 mac1 = 0011322CA785 withefi elevator = your_magic_elevator quiet initrd /image/DS3615xs/ramdisk.lzma } [...] all the time I get error 21 in what may be the problem of what I'm doing wrong? That grub.cfg file of yours seems wrongly formatted. Here is how it should look like: serial --port=0x3F8 --speed=115200 terminal_input serial console terminal_output serial console set default='0' set timeout='1' set fallback='0' menuentry 'Synology DS3615xs' --class os { insmod fat linux /image/DS3615xs/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 SataPortMap=x syno_hw_version=DS3615xs vender_format_version=2 vid=0x05e3 pid=0x0741 console=ttyS0,115200n8 sn=xxxxxxxxxxx mac1=xxxxxxxxxxxx withefi elevator=your_magic_elevator quiet initrd /image/DS3615xs/ramdisk.lzma } Replace: SataPortMap=x (x being the number of drives) sn=xxxxxxxxxxx and mac1=xxxxxxxxxxxx (xxxxxxxxxxx being your own serial number and mac address). Edited October 28, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
nowy1 Posted October 28, 2016 Share #752 Posted October 28, 2016 Hello, I read the whole thread I changed the entry in grub.cfg it looks like serial --port = 0x3F8 --speed = 115200 terminal_input serial console terminal_output serial console set default = '0' set timeout = '1' set fallback = '0' menuentry 'Synology DS3615xs' --class os { insmod fat linux / image / DS3615xs / zImage root = / dev / md0 syno_hdd_powerup_seq netif_num = 0 = 0 = 1 HddHotplug syno_hw_version = DS3615xs vender_format_version = 2 vid = pid = 0x0741 0x05e3 console = ttyS0,115200n8 sn = C7LWN09761 mac1 = 0011322CA785 withefi elevator = your_magic_elevator quiet initrd /image/DS3615xs/ramdisk.lzma } my usb vid is USB Storage: Product ID: 0x0741 Vendor ID: 0x05e3 (Genesys Logic, Inc.) Version: 2.20 Speed: Up to 480 Mb / sec Manufacturer: Generic Location ID: 0x14200000 / 7 Available Current (mA): 500 Current Required (mA): 98 Extra Operating Current (mA) 0 Media: all the time I get error 21 in what may be the problem of what I'm doing wrong? That grub.cfg file of your seems wrongly formatted. Here is how it should look like: serial --port=0x3F8 --speed=115200 terminal_input serial console terminal_output serial console set default='0' set timeout='1' set fallback='0' menuentry 'Synology DS3615xs' --class os { insmod fat linux /image/DS3615xs/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 SataPortMap=x syno_hw_version=DS3615xs vender_format_version=2 vid=0x05e3 pid=0x0741 console=ttyS0,115200n8 sn=xxxxxxxxxxx mac1=xxxxxxxxxxxx withefi elevator=your_magic_elevator quiet initrd /image/DS3615xs/ramdisk.lzma } Replace: SataPortMap=x (x being the number of drives) sn=xxxxxxxxxxx and mac1=xxxxxxxxxxxx (xxxxxxxxxxx being your own serial number and mac address). Thank you very much for your answer sn how do I download it if I type the MAC address of the card that I have installed in the pc? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted October 28, 2016 Share #753 Posted October 28, 2016 Replace: SataPortMap=x (x being the number of drives) sn=xxxxxxxxxxx and mac1=xxxxxxxxxxxx (xxxxxxxxxxx being your own serial number and mac address). Thank you very much for your answer sn how do I download it if I type the MAC address of the card that I have installed in the pc? SN >>> https://www.dropbox.com/s/zzi5we293gudb ... .xlsm?dl=0 MAC >>> Mac address of the network card of your nas. Quote Link to comment Share on other sites More sharing options...
nowy1 Posted October 28, 2016 Share #754 Posted October 28, 2016 Replace: SataPortMap=x (x being the number of drives) sn=xxxxxxxxxxx and mac1=xxxxxxxxxxxx (xxxxxxxxxxx being your own serial number and mac address). Thank you very much for your answer sn how do I download it if I type the MAC address of the card that I have installed in the pc? SN >>> https://www.dropbox.com/s/zzi5we293gudb ... .xlsm?dl=0 MAC >>> Mac address of the network card of your nas. I enter the data or what is in the picture and sn macadres? because as soon as you edit a file that's synology asystans is not my letter serial --port=0x3F8 --speed=115200 terminal_input serial console terminal_output serial console set default='0' set timeout='1' set fallback='0' menuentry 'Synology DS3615xs' --class os { insmod fat linux /image/DS3615xs/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 SataPortMap=x syno_hw_version=DS3615xs vender_format_version=2 vid=0x0951 pid=0x1665 console=ttyS0,115200n8 sn=C7LWN09761 mac1=00:11:32:2C:A7:85 withefi elevator=your_magic_elevator quiet initrd /image/DS3615xs/ramdisk.lzma } Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted October 28, 2016 Share #755 Posted October 28, 2016 (edited) I enter the data or what is in the picture and sn macadres? because as soon as you edit a file that's synology asystans is not my letter serial --port=0x3F8 --speed=115200 terminal_input serial console terminal_output serial console set default='0' set timeout='1' set fallback='0' menuentry 'Synology DS3615xs' --class os { insmod fat linux /image/DS3615xs/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 SataPortMap=x syno_hw_version=DS3615xs vender_format_version=2 vid=0x0951 pid=0x1665 console=ttyS0,115200n8 sn=C7LWN09761 mac1=00:11:32:2C:A7:85 withefi elevator=your_magic_elevator quiet initrd /image/DS3615xs/ramdisk.lzma } Note sure I understand what you are saying. mac1:00:11:32:2C:A7:85 should be without colon >>> mac1=0011322CA785 (although it might work with colon, not sure about this) As already stated once, SataPortMap=x (x being the number of drives). Please read carefully. Edited November 19, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
nowy1 Posted October 28, 2016 Share #756 Posted October 28, 2016 I'm sorry because I am confused whether changes vid pid sn mac should I do /grub/grub.cfg? Quote Link to comment Share on other sites More sharing options...
romain081 Posted October 28, 2016 Share #757 Posted October 28, 2016 Yeah, there is feature/bug in loading kernel modules in Jun's modification. At first DISK_MODULES are loaded from ramdisk in /linuxrc.syno, that's ok. In /sbin/post.init are EXTRA_MODULES copied to hdd only when they are not exist and they are then loaded after chroot from hdd (in hdd's /etc.default/rc). So: The installation step replace kernel modules (e.g. e1000e) with their version from pat file that cause not loading our updated kernel modules from ramdisk. Thus we have to replace these bad modules after reboot with version from ramdisk. Also rc.modules file is not updated after first copy in the installation step. Thus when is updated from Jun's original ramdisk to my ramdisk v1, added kernel modules are not loaded. This explain why my network card didn't work with Trantor's r8169 module because the important r8168 wasn't loaded. I will fix both in my v2 ramdisk. Just want to thanks you ! It works !!! Now I can use my network card of the mobo Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted October 28, 2016 Share #758 Posted October 28, 2016 I'm sorry because I am confused whether changes vid pid sn mac should I do /grub/grub.cfg? Yes. Quote Link to comment Share on other sites More sharing options...
Trantor Posted October 28, 2016 Share #759 Posted October 28, 2016 Great work Arcao OP Updated with latest links Quote Link to comment Share on other sites More sharing options...
jtaie Posted October 28, 2016 Share #760 Posted October 28, 2016 Supporting AMD CPUs require complete kernel recompilation. Kernel sources for DSM 6.0.2-8451 Update 2 is not available, only DSM 6 beta 7274. Thanks , that's what I suspected. Hello, Can you tell me what is the last DSM version I can update my HP Gen7 to ? Is there a tutorial to explain how ? I'm sorry but I've read the whole thread and i can't find pecisely the answer. Thanks. Quote Link to comment Share on other sites More sharing options...
nowy1 Posted October 28, 2016 Share #761 Posted October 28, 2016 I'm sorry because I am confused whether changes vid pid sn mac should I do /grub/grub.cfg? Yes. Thank you very much for your help everything works I question whether you can start here hdmi that has such kodi (XBMC) Quote Link to comment Share on other sites More sharing options...
kahooli Posted October 28, 2016 Share #762 Posted October 28, 2016 Supporting AMD CPUs require complete kernel recompilation. Kernel sources for DSM 6.0.2-8451 Update 2 is not available, only DSM 6 beta 7274. Thanks , that's what I suspected. Hello, Can you tell me what is the last DSM version I can update my HP Gen7 to ? Is there a tutorial to explain how ? I'm sorry but I've read the whole thread and i can't find pecisely the answer. Thanks. I'm running DSM 5.2-5967 Update 2 in a baremetal install on a Gen7 setup, by reading various threads on this forum and googling. The answers are there, you just need to look for them. I can't remember exactly which ones I used right now, and come to think of it, I think I used a variety of sources to understand how to get my setup to work just right. It probably helps that my day job is as a server IT professional. Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
F5BJR Posted October 28, 2016 Share #763 Posted October 28, 2016 A little question : Why i cannot use old IDE hard disks ( ATA ) or sata in mode IDE ( not AHCI ) with old motherboards as with old boot versions ? Are in old list : viewtopic.php?f=2&t=10973 Quote Link to comment Share on other sites More sharing options...
Rikk Posted October 28, 2016 Share #764 Posted October 28, 2016 Thank to all passionate who participates in this performance ! Everything works fine on my (fresh) Gen8, and I would like to clarify 2 things: 1) I have tested disks (used in my Gen7 with DSM 5.2) without cleanup / format operation. The DSM 6.0.2 has detected the previous version of DSM and have fixed the system partition issue (old DSM version), without removing data (as proposed during the process). From user stand point, is good (no needs to transfer/migrate data). Is it safe (filesystem ext4 vs Btrfs introduced with DSM 6) ? 2) With this version of ramdisk (DS3615xs), is it possible to use "Virtual DSM" feature ? Thank you ! Rikk Quote Link to comment Share on other sites More sharing options...
livearyan Posted October 28, 2016 Share #765 Posted October 28, 2016 How can i enable both lan cards in DSM 6 ? I have the gigabyte h97 wifi rev1.1 motherboard. What king of changes i have to do in the /grub/grub.cfg? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted October 28, 2016 Share #766 Posted October 28, 2016 I've created a tutorial for baremetal migration from dsm 5.2 to dsm 6.0 in English so this thread can re-focus on development matters. Hope it helps. viewtopic.php?f=2&t=22100 Quote Link to comment Share on other sites More sharing options...
derwoodbones Posted October 28, 2016 Share #767 Posted October 28, 2016 I am hoping someone in here will be so kind to tell me what I am doing wrong, I am trying to install on a Dell Optiplex 760 I downloaded the hybrid .img Edited the PID ViD & Mac I did not do the serial simply because I dont know how to generate, But I assume you dont need this if your not using quick connect. I am able to get it load up tells me it sees a drive from a prev install, I choose migrate, No matter what I do it reached 56% and Error 13. Will someone direct me to proper files/ method for my Optiplex 760 non UEFI bare metal ? Thank you all kindly. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted October 28, 2016 Share #768 Posted October 28, 2016 I am hoping someone in here will be so kind to tell me what I am doing wrong, I am trying to install on a Dell Optiplex 760 I downloaded the hybrid .img Edited the PID ViD & Mac I did not do the serial simply because I dont know how to generate, But I assume you dont need this if your not using quick connect. I am able to get it load up tells me it sees a drive from a prev install, I choose migrate, No matter what I do it reached 56% and Error 13. Will someone direct me to proper files/ method for my Optiplex 760 non UEFI bare metal ? Thank you all kindly. Error 13 = wrong VID and PID. For the SN just generate one. It needs it. Use this: https://www.dropbox.com/s/zzi5we293gudb ... .xlsm?dl=0 edit: error 13 = wrong VID and PID during setup. In your case it seems to happen after. Not sure what that is. Quote Link to comment Share on other sites More sharing options...
Arcao Posted October 28, 2016 Share #769 Posted October 28, 2016 If syno_libata_get_index is missing in the genuine syno kernel it means that it's disable, otherwise when we insmod module it shouldn't complain about missing function. Can you repack this in a test ramdisk so I can test it with my mobo using ata_piix. There is testing ramdisk: https://mega.nz/#!6F0AgTbZ!JzJCYhkek8p-m3y4VrErssLPWVKI2qZi2vLS_mPaqYs It contains these modules (built with CONFIG_SYNO_FIXED_DISK_NAME=n): ahci_platform, ata_piix, pata_ali, pata_amd, pata_it821x, pata_jmicron, pata_marvell, pata_mpiix, pata_oldpiix, pata_pdc2027x, pata_pdc202xx_old, pata_platform, pata_rdc, pata_sc1200, pata_sch, pata_sis, pata_via, sata_nv, sata_promise, sata_sil, sata_sis, sata_uli, sata_via and sata_vsc For others: Don't use this ramdisk on production environment. It's only for testing how will these disk kernel modules built with CONFIG_SYNO_FIXED_DISK_NAME=n behave. Quote Link to comment Share on other sites More sharing options...
weberio Posted October 28, 2016 Share #770 Posted October 28, 2016 Hi, I have a Acer m1640 with work DSM5 (5967.2) but with this new bootloader I can't to do work mi ethernet. It is capable with RTL8211BL ? Quote Link to comment Share on other sites More sharing options...
ema Posted October 28, 2016 Share #771 Posted October 28, 2016 Thank to all passionate who participates in this performance ! Everything works fine on my (fresh) Gen8, and I would like to clarify 2 things: 1) I have tested disks (used in my Gen7 with DSM 5.2) without cleanup / format operation. The DSM 6.0.2 has detected the previous version of DSM and have fixed the system partition issue (old DSM version), without removing data (as proposed during the process). From user stand point, is good (no needs to transfer/migrate data). Is it safe (filesystem ext4 vs Btrfs introduced with DSM 6) ? 2) With this version of ramdisk (DS3615xs), is it possible to use "Virtual DSM" feature ? Thank you ! Rikk You need btfrs for Virtual DSM... I suppose you're using ext4 because you have migrated your volume from DSM 5.2, so you have to backup, format and restore data back. Ciao ema Quote Link to comment Share on other sites More sharing options...
livearyan Posted October 28, 2016 Share #772 Posted October 28, 2016 I've created a tutorial for baremetal migration from dsm 5.2 to dsm 6.0 in English so this thread can re-focus on development matters. Hope it helps. viewtopic.php?f=2&t=22100 Change mac1=0011322CA785 to mac1=[your mac address] You can also add mac2=[our mac2 address] if you have a 2nd NIC. i have try to add mac2=MYMAC and doesn't work It works only with one lan card, not both of them. any ideas ? Quote Link to comment Share on other sites More sharing options...
badbad2000 Posted October 28, 2016 Share #773 Posted October 28, 2016 (edited) Power off buttonHere is the package. Just extract it, copy files and directories from power-off dir to root and reboot your nas. button.ko and evdev.ko prepared from quicknick 7274 kernel sources, acpid and config is from another thread on this forum. I compiled it in Debian chroot directly on my nas: cp synoconfigs/bromolow .config make ARCH="x86_64" oldconfig make ARCH="x86_64" menuconfig # set as module: Device Drivers ---> Input device support --> Event interface make ARCH="x86_64" modules I am using GA-H170N-WIFI, I manually extract the file to individual folder but doesn't seem the power button is working. Edited October 28, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
F5BJR Posted October 28, 2016 Share #774 Posted October 28, 2016 (edited) If syno_libata_get_index is missing in the genuine syno kernel it means that it's disable, otherwise when we insmod module it shouldn't complain about missing function. Can you repack this in a test ramdisk so I can test it with my mobo using ata_piix. There is testing ramdisk: https://mega.nz/#!6F0AgTbZ!JzJCYhkek8p-m3y4VrErssLPWVKI2qZi2vLS_mPaqYs ***************************** After overwrite ramdisk for use sata disks in IDE mode ( not AHCI ) i cannot see the NAS Operating system stopped, lights extinguished networks Before with one HDD in AHCI mode i have no problem Edited October 28, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
badbad2000 Posted October 28, 2016 Share #775 Posted October 28, 2016 I have a GA-H170N-WIFI but only 1 LAN is working. Intel I219V chip and the other one controlled by an Intel I211AT chip. in DSM network shown I have 2 LAN. but actually 1 is not working. Anything I can troubleshoot here? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.