badbad2000

Members
  • Content Count

    33
  • Joined

  • Last visited

Everything posted by badbad2000

  1. badbad2000

    DSM 6.2 Loader

    I have install using DSM_DS918+_23824.pat with DSM6.2.1 I have problem on the harddisk health info. it shown "access error", "fail to fetch smart information any idea how to solve it? I am using esxi 6.7
  2. is the ryzen memory is stated compatible to your motherboard? many cases system crash caused by the memory
  3. badbad2000

    DSM 6.1.x Loader

    Do you have the download link for V1.02-alpha-TEST ? look for post early mar. I solved my problem because I didn't plug in the sata cables to the LSI card. lol.
  4. badbad2000

    DSM 6.1.x Loader

    Hi DS3615xs 6.1 Jun's Mod V1.02-alpha-TEST has fixed my on board Ethernet issue but the LSI 9207-8i not detected. Is LSI 9207-8I supported yet? I am using esxi 6 because the 6.5 don't let me put my usb Ethernet as management interface permanently.
  5. Hi quicknick, is your version able to support lacp in esxI 6 distributed switch? It doesn't work on Jun version.
  6. badbad2000

    DSM 6.1.x Loader

    My mobo nic I211 not working with Jun loader. So I build esxi 6 with vcenter and configured the lacp on vds. However, when I boot the loader on the on lacp uplink it doesn't work. I think dsm don't support it. But if I use only a vmnet for 1 nic then is working. Anyone have experience on this? How can I solve this?
  7. Please support Intel i211, should be under Igb but doesn't seems mentioned in the hw supported list Sent from my iPad using Tapatalk
  8. I also ordered a LSI 9207-8i, hope this can be supported in 2.3 Sent from my iPad using Tapatalk
  9. I also ordered a LSI 9207-8i, hope this can be supported in 2.3 Sent from my iPad using Tapatalk
  10. yes, you need to get a sata HBA card that supported by the loader then Configuring VMDirectPath I/O pass-through. Make sure your mobo support this.
  11. badbad2000

    DSM 6.1.x Loader

    The first line decompress lzma archive and cpio command extract files to current directory. The second line pack all files and directories in current directory to cpio format and then apply lzma compression on it https://en.wikipedia.org/wiki/Cpio Hi Arcao, when I extract the ramdisk.lzma, I got the data is corrupt. But it not with extra.lzma # unlzma -c ../ramdisk.lzma | cpio -im unlzma: ../ramdisk.lzma: Compressed data is corrupt 45997 blocks
  12. badbad2000

    DSM 6.1.x Loader

    MOBO:GA-H170N-WIFI I manually load different version of module also doesn't work. tried 5.3.3.2, 5.3.4.4, 5.3.5.4 rmmod /lib/module/igb.ko insmod /lib/module/igb.ko modified the sequence in /etc/rc.modules still the e1000e will load before igb. in ramdisk, which file can control the sequence of loading the modules? can I do the repack also with ramdisk? maybe I just remove the e1000e.ko and igb.ko inside then repack it again.
  13. badbad2000

    DSM 6.1.x Loader

    look like insmod only load after. Even I copy igb.ko with lower version to /lib/modules still it load the latest version. I need to use this command to unpack and pack back the igb.ko? unlzma -c ../extra.lzma | cpio -im find . | cpio -o -H newc | lzma > ../extra_new.lzma anyone can explain what is the cpio means?
  14. badbad2000

    DSM 6.1.x Loader

    Hi Jun, It seems load the latest drivers 5.3.5.4 [sun Nov 20 15:23:03 2016] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.4 [sun Nov 20 15:23:03 2016] Copyright (c) 2007-2015 Intel Corporation. [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: irq 141 for MSI/MSI-X [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: irq 142 for MSI/MSI-X [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: added PHC on eth1 [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: eth1: (PCIe:2.5GT/s:Width x1) [sun Nov 20 15:23:03 2016] igb 0000:03:00.0 eth1: MAC: 1c:1b:0d:63:b9:38 [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: eth1: PBA No: Unknown [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: LRO is disabled [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) I unplug the eth0 and plug into eth1 and eth1 cant get IP from DHCP. Later I change back to eth0. [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: irq 141 for MSI/MSI-X [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: irq 142 for MSI/MSI-X [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: added PHC on eth1 [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: eth1: (PCIe:2.5GT/s:Width x1) [sun Nov 20 15:23:03 2016] igb 0000:03:00.0 eth1: MAC: 1c:1b:0d:63:b9:38 [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: eth1: PBA No: Unknown [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: LRO is disabled [sun Nov 20 15:23:03 2016] igb 0000:03:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [sun Nov 20 15:27:32 2016] igb 0000:03:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [sun Nov 20 15:29:04 2016] igb 0000:03:00.0 eth1: igb: eth1 NIC Link is Down I also tried to recompile the module and copy to /lib/modules and use insmod in /etc/rc.local. Still not working. Below is from my 5.2 which is using older version of igb [sun Nov 20 15:47:58 2016] Intel(R) Gigabit Ethernet Network Driver - version 5.3.3.2 [sun Nov 20 15:47:58 2016] Copyright (c) 2007-2015 Intel Corporation. [sun Nov 20 15:47:58 2016] igb 0000:03:00.0: irq 138 for MSI/MSI-X [sun Nov 20 15:47:58 2016] igb 0000:03:00.0: irq 139 for MSI/MSI-X [sun Nov 20 15:47:58 2016] igb 0000:03:00.0: added PHC on eth1 [sun Nov 20 15:47:58 2016] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [sun Nov 20 15:47:58 2016] igb 0000:03:00.0: eth1: (PCIe:2.5GT/s:Width x1) [sun Nov 20 15:47:58 2016] igb 0000:03:00.0 eth1: MAC: 1c:1b:0d:63:b9:38 [sun Nov 20 15:47:58 2016] igb 0000:03:00.0: eth1: PBA No: Unknown [sun Nov 20 15:47:58 2016] igb 0000:03:00.0: LRO is disabled [sun Nov 20 15:47:58 2016] igb 0000:03:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) Maybe not latest drivers always good... let me try to compile again using this version. Should I repack the extra.lzma or insmod is fine?
  15. badbad2000

    DSM 6.1.x Loader

    you can try to load the extra.lzma first if this is working for the i210. initrd $img/ramdisk.lzma $img/$extra_initrd chg to initrd $img/$extra_initrd $img/ramdisk.lzma
  16. i have installed esxi 6 with USB boot up. I am thinking of using controller passthru with either below HBA card. LSI LOGIC SAS 9207-8i Storage Controller LSI00301 Supermicro AOC-SAS2LP-MV8 Which one should I get or have other recommendation? Is this card supported in xpenology 5.2 or 6? Can I use the on-broad controller for passthru? (esxi not able to view the on board controller in the passthru option) I also tried installed as bare-metal but the phpvitualbox not so reliable to use. so i want to change to the route of esxi. In bare-metal i can do link aggregation and achieve transfer speed of ~100MBps Hope to hear some advise before I buy.
  17. badbad2000

    DSM 6.1.x Loader

    Hi Arcao, to extract the kernel, should I run the bash file in chroot env or I should exit out first? is it compulsory to create the rc.modules? (What I did is I copies the intel drivers from 5.2 (which is working for my mobo) such as e1000e_new and igb_new to the intel drivers folder in this source kernel and compile it.) sorry for many questions, as this is my first time deal with kernel compilation in Linux.
  18. badbad2000

    DSM 6.1.x Loader

    Hi, 1) which Linux are you running to do compilation? 2) do you run a Linux VM in your nas to do it or just the NAS OS itself? (the latest loader?) 3) do you have problem install the debian chroot? (I don't seems get the apt-get works) i compile inside chroot, instaled on dsm 6.0. Chroot works, but as some problems, if you change your dns on dsm, it will not change on chroot, you have to do it manualy, thats your problem with apt-get wont work. look for nameserver and configure. To fix dns cp /etc/resolv.conf /chrootdir/etc/ Sent from my SM-N920T using Tapatalk I did the modules but I have problem on extract lzma should I do it in chroot ?
  19. badbad2000

    DSM 6.1.x Loader

    We use quicknick 3.10.77-7274 kernel source from https://github.com/quiknick/7274-kernel (newer is not available). Compilation kernel modules is easy (I found it how to do it in http://setsunakawa.ddns.net/synology/dsm6/developer-guide.pdf): cp synoconfigs/bromolow .config make ARCH="x86_64" oldconfig make ARCH="x86_64" menuconfig make ARCH="x86_64" modules Our kernel modules are saved in extra.lzma. To extract extra.lzma I use this bash script: #!/bin/bash rm -r extra mkdir extra cd extra unlzma -c ../extra.lzma | cpio -im cd .. And for repack: #!/bin/bash cd extra find . | cpio -o -H newc | lzma > ../extra_new.lzma cd .. Kernel modules are loaded in order as they are defined in /etc/rc.modules: EXTRA_MODULES="mii mdio libphy atl1 atl1e atl1c alx uio ipg jme skge sky2 ptp_pch pch_gbe qla3xxx qlcnic qlge netxen_nic sfc e1000 pcnet32 vmxnet3 bnx2 libcrc32c bnx2x cnic e1000e igb ixgbe r8101 r8168 r8169 tg3 usbnet ax88179_178a button evdev" DISK_MODULES="BusLogic vmw_pvscsi megaraid_mm megaraid_mbox megaraid scsi_transport_spi mptbase mptscsih mptspi mptsas mptctl ata_piix megaraid_sas mpt2sas mpt3sas" EXTRA_FIRMWARES="tigon/tg3_tso5.bin tigon/tg3_tso.bin tigon/tg3.bin" For compiling modules from external sources i created symlink from kernel source root to /lib/modules/3.10.77/build. Then most of Makefiles will work without any change. As a build machine I use my nas with installed debian-chroot package. There I just installed build-essential, ncurses-dev and bc packages: sudo apt-get update sudo apt-get install build-essential ncurses-dev bc Hi, 1) which Linux are you running to do compilation? 2) do you run a Linux VM in your nas to do it or just the NAS OS itself? (the latest loader?) 3) do you have problem install the debian chroot? (I don't seems get the apt-get works)
  20. badbad2000

    DSM 6.1.x Loader

    I downgrade back to 5.2 as it gave both of my NIC working. Unless I don't mind keep as only 1 nic without link aggregation. Guess I will wait awhile until this newer loader more mature.
  21. badbad2000

    DSM 6.1.x Loader

    can help me out? is this driver issue or config issue?
  22. badbad2000

    DSM 6.1.x Loader

    I think after some testing, I realized my onboard Intel I211 is the one not working, which is eth1. Is the driver for I211 not supported? DSM can detect 2 lan but the eth1 never able to get IP from DHCP. the working one is eth0. 2016-10-30T13:39:12+08:00 CALVIN-NAS kernel: [ 12.315401] zram: module is from the staging directory, the quality is unknown, you have been warned. 2016-10-30T13:39:14+08:00 CALVIN-NAS kernel: [ 13.869241] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.5-NAPI 2016-10-30T13:39:14+08:00 CALVIN-NAS kernel: [ 13.869242] e1000e: Copyright(c) 1999 - 2016 Intel Corporation. 2016-10-30T13:39:14+08:00 CALVIN-NAS kernel: [ 13.869339] e1000e 0000:00:1f.6: setting latency timer to 64 2016-10-30T13:39:14+08:00 CALVIN-NAS kernel: [ 13.869382] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode 2016-10-30T13:39:14+08:00 CALVIN-NAS kernel: [ 13.869400] e1000e 0000:00:1f.6: irq 140 for MSI/MSI-X 2016-10-30T13:39:14+08:00 CALVIN-NAS kernel: [ 14.355621] e1000e 0000:00:1f.6 eth0: registered PHC clock 2016-10-30T13:39:14+08:00 CALVIN-NAS kernel: [ 14.355624] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 1c:1b:0d:63:b9:36 2016-10-30T13:39:14+08:00 CALVIN-NAS kernel: [ 14.355625] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection 2016-10-30T13:39:14+08:00 CALVIN-NAS kernel: [ 14.355694] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.375642] igb 0000:03:00.0: irq 141 for MSI/MSI-X 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.375646] igb 0000:03:00.0: irq 142 for MSI/MSI-X 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.416236] igb 0000:03:00.0: added PHC on eth1 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.416238] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.416239] igb 0000:03:00.0: eth1: (PCIe:2.5GT/s:Width x1) 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.416240] igb 0000:03:00.0 eth1: MAC: 1c:1b:0d:63:b9:38 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.416243] igb 0000:03:00.0: eth1: PBA No: Unknown 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.416253] igb 0000:03:00.0: LRO is disabled 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.416254] igb 0000:03:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.664852] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.664853] e1000: Copyright (c) 1999-2006 Intel Corporation. 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.746644] 2016-10-30 5:39:15 UTC 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.746648] Brand: Synology 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.746649] Model: DS-3615xs 2016-10-30T13:39:15+08:00 CALVIN-NAS kernel: [ 14.746650] set group disks wakeup number to 4, spinup time deno 7 2016-10-30T13:39:16+08:00 CALVIN-NAS kernel: [ 15.924310] e1000e 0000:00:1f.6: irq 140 for MSI/MSI-X 2016-10-30T13:39:16+08:00 CALVIN-NAS kernel: [ 16.025096] e1000e 0000:00:1f.6: irq 140 for MSI/MSI-X 2016-10-30T13:39:19+08:00 CALVIN-NAS kernel: [ 18.872040] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx set vid=0x0781 set pid=0x556C set sn=B1W4N42666 set mac1=1C1B0D63B936 set mac2=1C1B0D63B938 set rootdev=/dev/md0 set netif_num=2 set extra_args_3615='' from BIOS: Intel I211 - 1C:1B:0D:63:B9:38 Intel I219-V - 1C:1B:0D:63:B9:36 Motherboard: GA-H170N-WIFI Using latest image v1.0 from Jun
  23. badbad2000

    DSM 6.1.x Loader

    Can help to add an Intel i219V driver?
  24. badbad2000

    DSM 6.1.x Loader

    Same here ! Only one works. If i use the mac of the realtek lan, the realtek works. If i use the mac of the intel lan, the intel work. They work only as one, not both of them work. I have to set mac1=MAC, when i set mac2=MAC (this isn't working). my grub: ------ serial --port=0x3F8 --speed=115200 terminal_input serial console terminal_output serial console set default='0' set timeout='1' set fallback='0' insmod part_msdos insmod part_gpt set locale_dir=$prefix/locale set lang=en_US menuentry 'Synology DS3615xs' --class os { insmod fat linux $img/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 vid=0x0781 pid=0x5580 console=ttyS0,115200n8 sn=C8LWN00821 mac1=408D5CFFDEDA mac2=408D5CFFDEDG withefi elevator=your_magic_elevator quiet set img=$prefix/../image/DS3615xs initrd $img/ramdisk.lzma } ------ I think mine is different situation, the Intel I219V is always not working