Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs


Recommended Posts

Just now, Leroy said:

As i'm currently running on 0.10 : Is it enough to just replace the 0.10 files with 0.11, or anything additional required for upgrading from 0.10 to 0.11?  

you can just repalce the files, it will always compare whats on disk with wahts from usb and if there is a difference it will copy from usb to disk (dsm system) and use what comes from usb, so its easy to switch

 

3 minutes ago, Leroy said:

I haven't found out anything xpenology specific for dmesg or how to set it up.

anythin about mpt2sas or mpt3sas ? thats the driver for your card

Link to post
Share on other sites
20 часов назад, lotusd сказал:

Many thanks for your update, all works fine now with DSM 6.2.3 and your extras v0.11

Unfortunately WebDAV server from the package center failed to continue working. If I use https://mydomain.net:5006 it refuses to connect, saying server cannot be found in the net. It used to work fine with the same settings before on 6.2.2

Edited by lotusd
Link to post
Share on other sites
1 hour ago, lotusd said:

Unfortunately WebDAV server from the package center failed to continue working. If I use https://mydomain.net:5006 it refuses to connect, saying server cannot be found in the net. It used to work fine with the same settings before on 6.2.2

you do realize that synology retracted 6.2.3 and only seems to offer it for x20+ (geminilake) systems and manual download

also the video station thing with hardware transcoding shows that there might be more things wrong in 6.2.3 then the universal search problem

i don't think a webdav package is related to drivers (and thats what we discuss here)

maybe you should consider downgrading and wait for a general release of 6.2.3?

i did use 6.2.3 for my new hardware and my real nas system but is don't need much of all the thing dsm can (possibly) do, i'm still using it as a data tank and anything else is optional (and yes i could use omv instead without noticing much)

 

 

 

 

Link to post
Share on other sites
13 hours ago, IG-88 said:

anythin about mpt2sas or mpt3sas ? thats the driver for your card


This is what i get from the console output when using v.11 : 
 

Spoiler

   The highlighted entry will be executed automatically in 0s.
[    0.005058] Spectre V2 : kernel not compiled with retpoline; no mitigation available!
patching file etc/rc
patching file etc/synoinfo.conf
patching file linuxrc.syno
patching file usr/sbin/init.post
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ohci-hcd ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module xhci-pci ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading module scsi_transport_sas ... [  OK  ]
:: Loading module libsas ... [  OK  ]
:: Loading module raid_class ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading module vmw_pvscsi ... [  OK  ]
:: Loading module megaraid_mm ... [  OK  ]
:: Loading module megaraid_mbox ... [  OK  ]
:: Loading module mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading module mptspi ... [  OK  ]
:: Loading module mptctl ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module megaraid_sas ... [  OK  ]
:: Loading module mptsas ... [  OK  ]
:: Loading module mpt3sas ... [FAILED]
:: Loading module mdio ... [  OK  ]
:: Loading module rtc-cmos ... [  OK  ]
:: Loading module 3w-9xxx ... [  OK  ]
:: Loading module 3w-sas ... [  OK  ]
:: Loading module aacraid ... [  OK  ]
:: Loading module arcmsr ... [  OK  ]
:: Loading module gdth ... [  OK  ]
:: Loading module hpsa ... [  OK  ]
:: Loading module hptiop ... [  OK  ]
:: Loading module isci ... [  OK  ]
:: Loading module mvsas ... [  OK  ]
:: Loading module mvumi ... [  OK  ]
:: Loading module aic94xx ... [  OK  ]
:: Loading module sx8 ... [  OK  ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
Partition Version=0
Partition layout is not DiskStation style.
NOT EXECUTE /sbin/e2fsck.
Mounting /dev/md0 /tmpRoot
mount: lseek failed, msg:Invalid argument
mount: mounting /dev/md0 on /tmpRoot failed: No such device
mount /dev/md0 fail, returns
Exit on error [3] no init exists...
Tue May 12 06:54:20 UTC 2020
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=4578416k,nr_inodes=1144604,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno failed on 3
starting pid 4847, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [  OK  ]
:: Mounting tmpfs ... [  OK  ]
:: Mounting devtmpfs ... [  OK  ]
:: Mounting devpts ... [  OK  ]
:: Mounting sysfs ... [  OK  ]
mdadm: error opening /dev/md1: No such file or directory
rc: Use all internal disk as swap.
rc: No assigned swap disk (sda2) can be assembled, use all instead.
rc: Use all internal disk as swap.
rc: No disk (sda2) can be assembled.
swapon: can't stat '/dev/md1': No such file or directory
:: Loading module crc-ccitt ... [  OK  ]
:: Loading module crc-itu-t ... [  OK  ]
:: Loading module cpufreq_ondemand ... [FAILED]
:: Loading module fat ... [  OK  ]
:: Loading module vfat ... [  OK  ]
:: Loading module udp_tunnel ... [  OK  ]
:: Loading module ip6_udp_tunnel ... [  OK  ]
:: Loading module vxlan ... [  OK  ]
:: Loading module e1000e ... [  OK  ]
:: Loading module i2c-algo-bit ... [  OK  ]
:: Loading module igb ... [  OK  ]
:: Loading module be2net ... [  OK  ]
:: Loading module ixgbe ... [  OK  ]
:: Loading module r8168 ... [  OK  ]
:: Loading module mii ... [  OK  ]
:: Loading module libphy ... [  OK  ]
:: Loading module usbnet ... [  OK  ]
:: Loading module r8169 ... [  OK  ]
:: Loading module atl1 ... [  OK  ]
:: Loading module atl1e ... [  OK  ]
:: Loading module atl1c ... [  OK  ]
:: Loading module alx ... [  OK  ]
:: Loading module uio ... [  OK  ]
:: Loading module jme ... [  OK  ]
:: Loading module skge ... [  OK  ]
:: Loading module sky2 ... [  OK  ]
:: Loading module qla3xxx ... [  OK  ]
:: Loading module qlcnic ... [  OK  ]
:: Loading module qlge ... [  OK  ]
:: Loading module netxen_nic ... [  OK  ]
:: Loading module sfc ... [  OK  ]
:: Loading module e1000 ... [  OK  ]
:: Loading module pcnet32 ... [  OK  ]
:: Loading module vmxnet3 ... [  OK  ]
:: Loading module bnx2 ... [  OK  ]
:: Loading module bnx2x ... [  OK  ]
:: Loading module r8101 ... [  OK  ]
:: Loading module tg3 ... [  OK  ]
:: Loading module ax88179_178a ... [  OK  ]
:: Loading module button ... [  OK  ]
:: Loading module evdev ... [  OK  ]
:: Loading module asix ... [  OK  ]
:: Loading module atl2 ... [  OK  ]
:: Loading module atlantic ... [FAILED]
:: Loading module bna ... [  OK  ]
:: Loading module cx82310_eth ... [  OK  ]
:: Loading module cxgb ... [  OK  ]
:: Loading module cxgb3 ... [  OK  ]
:: Loading module cxgb4 ... [  OK  ]
:: Loading module dl2k ... [  OK  ]
:: Loading module e100 ... [  OK  ]
:: Loading module enic ... [  OK  ]
:: Loading module mcs7830 ... [  OK  ]
:: Loading module mlx_compat ... [  OK  ]
:: Loading module mlx4_core ... [  OK  ]
:: Loading module mlx4_en ... [  OK  ]
:: Loading module mlx5_core ... [  OK  ]
:: Loading module mvmdio ... [  OK  ]
:: Loading module pegasus ... [  OK  ]
:: Loading module plusb ... [  OK  ]
:: Loading module rtl8150 ... [  OK  ]
:: Loading module sc92031 ... [  OK  ]
:: Loading module tn40xx[    6.078482] tn40xx: Tehuti Network Driver, 0.3.6.17.2
[    6.078726] tn40xx: Supported phys : MV88X3120 MV88X3310 MV88E2010 QT2025 TLK10232 AQR105 MUSTANG
 ... [  OK  ]
:: Loading module via-rhine ... [  OK  ]
:: Loading module via-velocity ... [  OK  ]
:: Loading module i40e ... [  OK  ]
:: Loading module r8152 ... [  OK  ]
:: Loading module s2io ... [  OK  ]
:: Loading module vxge ... [  OK  ]
:: Loading module et131x ... [  OK  ]
:: Loading module aqc111 ... [  OK  ]
:: Loading module firewire-core ... [  OK  ]
:: Loading module firewire-ohci ... [  OK  ]
:: Loading module firewire-sbp2 ... [  OK  ]
:: Loading module synobios ... [  OK  ]
udhcpc (v1.16.1) started
udhcpc (v1.16.1) started
eth0      Link encap:Ethernet  HWaddr 00:0C:29:BE:24:28
          inet addr:192.168.1.23  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1043 (1.0 KiB)  TX bytes:1480 (1.4 KiB)
          Interrupt:19 Memory:fd3a0000-fd3c0000

eth1      Link encap:Ethernet  HWaddr 00:0C:29:BE:24:32
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1508 (1.4 KiB)  TX bytes:60 (60.0 B)
          Interrupt:16 Memory:fbca0000-fbcc0000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

:: Starting syslogd ... [  OK  ]
:: Starting scemd
:: Starting services in background
Starting findhostd in flash_rd...
Starting services in flash_rd...
Running /usr/syno/etc/rc.d/J01httpd.sh...
Starting httpd:80 in flash_rd...
Starting httpd:5000 in flash_rd...
Running /usr/syno/etc/rc.d/J03ssdpd.sh...
/usr/bin/minissdpd -i eth0 -i eth1 -i eth2
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-000c29be2428::upnp:rootdevice
(56): Synology/synology_apollolake_918+/6.2-23739/192.168.1.23
(45): http://192.168.1.23:5000/description-eth0.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 192.168.1.23 000c29be2428 6.2-23739 synology_apollolake_918+ eth0
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-000c29be2432::upnp:rootdevice
(56): Synology/synology_apollolake_918+/6.2-23739/192.168.1.11
(45): http://192.168.1.11:5000/description-eth1.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 192.168.1.11 000c29be2432 6.2-23739 synology_apollolake_918+ eth1
eth2 not UP
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/etc/rc.d/J99avahi.sh...
Starting Avahi mDNS/DNS-SD Daemon
cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf
:: Loading module hid ... [  OK  ]
:: Loading module usbhid ... [  OK  ]
============ Date ============
Tue May 12 06:54:34 UTC 2020
==============================
starting pid 7009, tty '': '/sbin/getty 115200 console'

Tue May 12 06:54:35 2020

DiskStation login:

 

After this, it promps me to install DSM and I see it only detected 1 Drive, which is what would happen if none of the Drives on the LSI Controller are detected.


And just in case it helps somehow, the dmesg log from booting with 0.10  (relevant stuff should start at  2.830538 i think) :
 

Spoiler

[    0.465087] pci 0000:00:07.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    0.465103] pci 0000:00:07.3: quirk: [io  0x1040-0x104f] claimed by PIIX4 SMB
[    0.465240] pci 0000:00:07.7: [15ad:0740] type 00 class 0x088000
[    0.466004] pci 0000:00:07.7: reg 0x10: [io  0x1080-0x10bf]
[    0.466099] pci 0000:00:07.7: reg 0x14: [mem 0xfebfe000-0xfebfffff 64bit]
[    0.468185] pci 0000:00:0f.0: [15ad:0405] type 00 class 0x030000
[    0.470062] pci 0000:00:0f.0: reg 0x10: [io  0x1070-0x107f]
[    0.472078] pci 0000:00:0f.0: reg 0x14: [mem 0xe8000000-0xefffffff pref]
[    0.474084] pci 0000:00:0f.0: reg 0x18: [mem 0xfe000000-0xfe7fffff]
[    0.482124] pci 0000:00:0f.0: reg 0x30: [mem 0x00000000-0x00007fff pref]
[    0.482264] pci 0000:00:11.0: [15ad:0790] type 01 class 0x060401
[    0.482319] pci 0000:00:11.0: System wakeup disabled by ACPI
[    0.482416] pci 0000:00:15.0: [15ad:07a0] type 01 class 0x060400
[    0.482471] pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
[    0.482527] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.482623] pci 0000:00:15.1: [15ad:07a0] type 01 class 0x060400
[    0.483195] pci 0000:00:15.1: PME# supported from D0 D3hot D3cold
[    0.483250] pci 0000:00:15.1: System wakeup disabled by ACPI
[    0.483350] pci 0000:00:15.2: [15ad:07a0] type 01 class 0x060400
[    0.483406] pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
[    0.483461] pci 0000:00:15.2: System wakeup disabled by ACPI
[    0.483564] pci 0000:00:15.3: [15ad:07a0] type 01 class 0x060400
[    0.484160] pci 0000:00:15.3: PME# supported from D0 D3hot D3cold
[    0.484216] pci 0000:00:15.3: System wakeup disabled by ACPI
[    0.484311] pci 0000:00:15.4: [15ad:07a0] type 01 class 0x060400
[    0.484366] pci 0000:00:15.4: PME# supported from D0 D3hot D3cold
[    0.484422] pci 0000:00:15.4: System wakeup disabled by ACPI
[    0.484519] pci 0000:00:15.5: [15ad:07a0] type 01 class 0x060400
[    0.484575] pci 0000:00:15.5: PME# supported from D0 D3hot D3cold
[    0.484631] pci 0000:00:15.5: System wakeup disabled by ACPI
[    0.484724] pci 0000:00:15.6: [15ad:07a0] type 01 class 0x060400
[    0.485207] pci 0000:00:15.6: PME# supported from D0 D3hot D3cold
[    0.485263] pci 0000:00:15.6: System wakeup disabled by ACPI
[    0.485360] pci 0000:00:15.7: [15ad:07a0] type 01 class 0x060400
[    0.485416] pci 0000:00:15.7: PME# supported from D0 D3hot D3cold
[    0.485471] pci 0000:00:15.7: System wakeup disabled by ACPI
[    0.485567] pci 0000:00:16.0: [15ad:07a0] type 01 class 0x060400
[    0.486151] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.486215] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.486313] pci 0000:00:16.1: [15ad:07a0] type 01 class 0x060400
[    0.486368] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[    0.486424] pci 0000:00:16.1: System wakeup disabled by ACPI
[    0.486518] pci 0000:00:16.2: [15ad:07a0] type 01 class 0x060400
[    0.486574] pci 0000:00:16.2: PME# supported from D0 D3hot D3cold
[    0.486630] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.486723] pci 0000:00:16.3: [15ad:07a0] type 01 class 0x060400
[    0.487224] pci 0000:00:16.3: PME# supported from D0 D3hot D3cold
[    0.487279] pci 0000:00:16.3: System wakeup disabled by ACPI
[    0.487376] pci 0000:00:16.4: [15ad:07a0] type 01 class 0x060400
[    0.487431] pci 0000:00:16.4: PME# supported from D0 D3hot D3cold
[    0.487487] pci 0000:00:16.4: System wakeup disabled by ACPI
[    0.487582] pci 0000:00:16.5: [15ad:07a0] type 01 class 0x060400
[    0.488184] pci 0000:00:16.5: PME# supported from D0 D3hot D3cold
[    0.488239] pci 0000:00:16.5: System wakeup disabled by ACPI
[    0.488335] pci 0000:00:16.6: [15ad:07a0] type 01 class 0x060400
[    0.488391] pci 0000:00:16.6: PME# supported from D0 D3hot D3cold
[    0.488447] pci 0000:00:16.6: System wakeup disabled by ACPI
[    0.488558] pci 0000:00:16.7: [15ad:07a0] type 01 class 0x060400
[    0.489154] pci 0000:00:16.7: PME# supported from D0 D3hot D3cold
[    0.489239] pci 0000:00:16.7: System wakeup disabled by ACPI
[    0.489337] pci 0000:00:17.0: [15ad:07a0] type 01 class 0x060400
[    0.489393] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
[    0.489449] pci 0000:00:17.0: System wakeup disabled by ACPI
[    0.489545] pci 0000:00:17.1: [15ad:07a0] type 01 class 0x060400
[    0.489600] pci 0000:00:17.1: PME# supported from D0 D3hot D3cold
[    0.489656] pci 0000:00:17.1: System wakeup disabled by ACPI
[    0.489752] pci 0000:00:17.2: [15ad:07a0] type 01 class 0x060400
[    0.490247] pci 0000:00:17.2: PME# supported from D0 D3hot D3cold
[    0.490302] pci 0000:00:17.2: System wakeup disabled by ACPI
[    0.490399] pci 0000:00:17.3: [15ad:07a0] type 01 class 0x060400
[    0.490455] pci 0000:00:17.3: PME# supported from D0 D3hot D3cold
[    0.490510] pci 0000:00:17.3: System wakeup disabled by ACPI
[    0.490604] pci 0000:00:17.4: [15ad:07a0] type 01 class 0x060400
[    0.491186] pci 0000:00:17.4: PME# supported from D0 D3hot D3cold
[    0.491254] pci 0000:00:17.4: System wakeup disabled by ACPI
[    0.491351] pci 0000:00:17.5: [15ad:07a0] type 01 class 0x060400
[    0.491407] pci 0000:00:17.5: PME# supported from D0 D3hot D3cold
[    0.491463] pci 0000:00:17.5: System wakeup disabled by ACPI
[    0.491564] pci 0000:00:17.6: [15ad:07a0] type 01 class 0x060400
[    0.491620] pci 0000:00:17.6: PME# supported from D0 D3hot D3cold
[    0.491676] pci 0000:00:17.6: System wakeup disabled by ACPI
[    0.491771] pci 0000:00:17.7: [15ad:07a0] type 01 class 0x060400
[    0.492262] pci 0000:00:17.7: PME# supported from D0 D3hot D3cold
[    0.492318] pci 0000:00:17.7: System wakeup disabled by ACPI
[    0.492414] pci 0000:00:18.0: [15ad:07a0] type 01 class 0x060400
[    0.492470] pci 0000:00:18.0: PME# supported from D0 D3hot D3cold
[    0.492526] pci 0000:00:18.0: System wakeup disabled by ACPI
[    0.492621] pci 0000:00:18.1: [15ad:07a0] type 01 class 0x060400
[    0.493225] pci 0000:00:18.1: PME# supported from D0 D3hot D3cold
[    0.493280] pci 0000:00:18.1: System wakeup disabled by ACPI
[    0.493377] pci 0000:00:18.2: [15ad:07a0] type 01 class 0x060400
[    0.493433] pci 0000:00:18.2: PME# supported from D0 D3hot D3cold
[    0.493489] pci 0000:00:18.2: System wakeup disabled by ACPI
[    0.493583] pci 0000:00:18.3: [15ad:07a0] type 01 class 0x060400
[    0.494178] pci 0000:00:18.3: PME# supported from D0 D3hot D3cold
[    0.494277] pci 0000:00:18.3: System wakeup disabled by ACPI
[    0.494373] pci 0000:00:18.4: [15ad:07a0] type 01 class 0x060400
[    0.494429] pci 0000:00:18.4: PME# supported from D0 D3hot D3cold
[    0.494485] pci 0000:00:18.4: System wakeup disabled by ACPI
[    0.494581] pci 0000:00:18.5: [15ad:07a0] type 01 class 0x060400
[    0.494637] pci 0000:00:18.5: PME# supported from D0 D3hot D3cold
[    0.494693] pci 0000:00:18.5: System wakeup disabled by ACPI
[    0.494790] pci 0000:00:18.6: [15ad:07a0] type 01 class 0x060400
[    0.495285] pci 0000:00:18.6: PME# supported from D0 D3hot D3cold
[    0.495340] pci 0000:00:18.6: System wakeup disabled by ACPI
[    0.495436] pci 0000:00:18.7: [15ad:07a0] type 01 class 0x060400
[    0.495491] pci 0000:00:18.7: PME# supported from D0 D3hot D3cold
[    0.495547] pci 0000:00:18.7: System wakeup disabled by ACPI
[    0.495729] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.495855] pci 0000:02:03.0: [15ad:07e0] type 00 class 0x010601
[    0.499213] pci 0000:02:03.0: reg 0x24: [mem 0xfd5ff000-0xfd5fffff]
[    0.499315] pci 0000:02:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.499370] pci 0000:02:03.0: PME# supported from D3hot
[    0.499426] pci 0000:02:03.0: System wakeup disabled by ACPI
[    0.499537] pci 0000:00:11.0: PCI bridge to [bus 02] (subtractive decode)
[    0.499560] pci 0000:00:11.0:   bridge window [io  0x2000-0x3fff]
[    0.499579] pci 0000:00:11.0:   bridge window [mem 0xfd500000-0xfdffffff]
[    0.499615] pci 0000:00:11.0:   bridge window [mem 0xe7b00000-0xe7ffffff 64bit pref]
[    0.499618] pci 0000:00:11.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.499620] pci 0000:00:11.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.499621] pci 0000:00:11.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.499623] pci 0000:00:11.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.499625] pci 0000:00:11.0:   bridge window [mem 0x3b000000-0xfebfffff window] (subtractive decode)
[    0.499627] pci 0000:00:11.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.499629] pci 0000:00:11.0:   bridge window [io  0x0d00-0xfeff window] (subtractive decode)
[    0.499756] pci 0000:03:00.0: [1000:0072] type 00 class 0x010700
[    0.501243] pci 0000:03:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.501388] pci 0000:03:00.0: reg 0x14: [mem 0xfd4fc000-0xfd4fffff 64bit]
[    0.502506] pci 0000:03:00.0: reg 0x1c: [mem 0xfd480000-0xfd4bffff 64bit]
[    0.504577] pci 0000:03:00.0: supports D1 D2
[    0.504632] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.504699] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.504750] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.504769] pci 0000:00:15.0:   bridge window [io  0x4000-0x4fff]
[    0.504788] pci 0000:00:15.0:   bridge window [mem 0xfd400000-0xfd4fffff]
[    0.504824] pci 0000:00:15.0:   bridge window [mem 0x3b000000-0x3b1fffff 64bit pref]
[    0.504908] pci 0000:00:15.1: PCI bridge to [bus 04]
[    0.504927] pci 0000:00:15.1:   bridge window [io  0x7000-0x7fff]
[    0.504945] pci 0000:00:15.1:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.504981] pci 0000:00:15.1:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    0.505062] pci 0000:00:15.2: PCI bridge to [bus 05]
[    0.505081] pci 0000:00:15.2:   bridge window [io  0xa000-0xafff]
[    0.505099] pci 0000:00:15.2:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.505135] pci 0000:00:15.2:   bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
[    0.505360] pci 0000:00:15.3: PCI bridge to [bus 06]
[    0.505378] pci 0000:00:15.3:   bridge window [io  0xe000-0xefff]
[    0.505397] pci 0000:00:15.3:   bridge window [mem 0xfb600000-0xfb6fffff]
[    0.505432] pci 0000:00:15.3:   bridge window [mem 0xcfa00000-0xcfafffff 64bit pref]
[    0.505610] pci 0000:00:15.4: PCI bridge to [bus 07]
[    0.505645] pci 0000:00:15.4:   bridge window [mem 0xfb200000-0xfb2fffff]
[    0.505680] pci 0000:00:15.4:   bridge window [mem 0xcf600000-0xcf6fffff 64bit pref]
[    0.505762] pci 0000:00:15.5: PCI bridge to [bus 08]
[    0.505797] pci 0000:00:15.5:   bridge window [mem 0xfae00000-0xfaefffff]
[    0.505833] pci 0000:00:15.5:   bridge window [mem 0xcf200000-0xcf2fffff 64bit pref]
[    0.505912] pci 0000:00:15.6: PCI bridge to [bus 09]
[    0.505948] pci 0000:00:15.6:   bridge window [mem 0xfaa00000-0xfaafffff]
[    0.505983] pci 0000:00:15.6:   bridge window [mem 0xcee00000-0xceefffff 64bit pref]
[    0.506064] pci 0000:00:15.7: PCI bridge to [bus 0a]
[    0.506099] pci 0000:00:15.7:   bridge window [mem 0xfa600000-0xfa6fffff]
[    0.506134] pci 0000:00:15.7:   bridge window [mem 0xcea00000-0xceafffff 64bit pref]
[    0.506409] pci 0000:0b:00.0: [8086:10d3] type 00 class 0x020000
[    0.507538] pci 0000:0b:00.0: reg 0x10: [mem 0xfd3a0000-0xfd3bffff]
[    0.508298] pci 0000:0b:00.0: reg 0x14: [mem 0xfd3c0000-0xfd3dffff]
[    0.509306] pci 0000:0b:00.0: reg 0x18: [io  0x5000-0x501f]
[    0.510322] pci 0000:0b:00.0: reg 0x1c: [mem 0xfd3fc000-0xfd3fffff]
[    0.513340] pci 0000:0b:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.513636] pci 0000:0b:00.0: System wakeup disabled by ACPI
[    0.513747] pci 0000:00:16.0: PCI bridge to [bus 0b]
[    0.513767] pci 0000:00:16.0:   bridge window [io  0x5000-0x5fff]
[    0.513787] pci 0000:00:16.0:   bridge window [mem 0xfd300000-0xfd3fffff]
[    0.513822] pci 0000:00:16.0:   bridge window [mem 0x3b200000-0x3b3fffff 64bit pref]
[    0.513947] pci 0000:0c:00.0: [1106:3483] type 00 class 0x0c0330
[    0.514580] pci 0000:0c:00.0: reg 0x10: [mem 0xfbdff000-0xfbdfffff 64bit]
[    0.517716] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.517772] pci 0000:0c:00.0: System wakeup disabled by ACPI
[    0.517830] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.517883] pci 0000:00:16.1: PCI bridge to [bus 0c]
[    0.517919] pci 0000:00:16.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.517955] pci 0000:00:16.1:   bridge window [mem 0x3b400000-0x3b5fffff 64bit pref]
[    0.518037] pci 0000:00:16.2: PCI bridge to [bus 0d]
[    0.518056] pci 0000:00:16.2:   bridge window [io  0xb000-0xbfff]
[    0.518076] pci 0000:00:16.2:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.518112] pci 0000:00:16.2:   bridge window [mem 0xcfd00000-0xcfdfffff 64bit pref]
[    0.518194] pci 0000:00:16.3: PCI bridge to [bus 0e]
[    0.518229] pci 0000:00:16.3:   bridge window [mem 0xfb500000-0xfb5fffff]
[    0.518264] pci 0000:00:16.3:   bridge window [mem 0xcf900000-0xcf9fffff 64bit pref]
[    0.518461] pci 0000:00:16.4: PCI bridge to [bus 0f]
[    0.518497] pci 0000:00:16.4:   bridge window [mem 0xfb100000-0xfb1fffff]
[    0.518532] pci 0000:00:16.4:   bridge window [mem 0xcf500000-0xcf5fffff 64bit pref]
[    0.518750] pci 0000:00:16.5: PCI bridge to [bus 10]
[    0.518785] pci 0000:00:16.5:   bridge window [mem 0xfad00000-0xfadfffff]
[    0.518820] pci 0000:00:16.5:   bridge window [mem 0xcf100000-0xcf1fffff 64bit pref]
[    0.518901] pci 0000:00:16.6: PCI bridge to [bus 11]
[    0.518936] pci 0000:00:16.6:   bridge window [mem 0xfa900000-0xfa9fffff]
[    0.518971] pci 0000:00:16.6:   bridge window [mem 0xced00000-0xcedfffff 64bit pref]
[    0.519052] pci 0000:00:16.7: PCI bridge to [bus 12]
[    0.519087] pci 0000:00:16.7:   bridge window [mem 0xfa500000-0xfa5fffff]
[    0.519122] pci 0000:00:16.7:   bridge window [mem 0xce900000-0xce9fffff 64bit pref]
[    0.519246] pci 0000:13:00.0: [8086:3e90] type 00 class 0x030000
[    0.519443] pci 0000:13:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff 64bit]
[    0.519499] pci 0000:13:00.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.519548] pci 0000:13:00.0: reg 0x20: [io  0x6000-0x603f]
[    0.519728] pci 0000:13:00.0: System wakeup disabled by ACPI
[    0.519787] pci 0000:13:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.519835] pci 0000:00:17.0: PCI bridge to [bus 13]
[    0.519853] pci 0000:00:17.0:   bridge window [io  0x6000-0x6fff]
[    0.519872] pci 0000:00:17.0:   bridge window [mem 0xfc000000-0xfcffffff]
[    0.519908] pci 0000:00:17.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.520032] pci 0000:14:00.0: [8086:10d3] type 00 class 0x020000
[    0.520422] pci 0000:14:00.0: reg 0x10: [mem 0xfbca0000-0xfbcbffff]
[    0.521398] pci 0000:14:00.0: reg 0x14: [mem 0xfbcc0000-0xfbcdffff]
[    0.521641] pci 0000:14:00.0: reg 0x18: [io  0x8000-0x801f]
[    0.522407] pci 0000:14:00.0: reg 0x1c: [mem 0xfbcfc000-0xfbcfffff]
[    0.524428] pci 0000:14:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.524759] pci 0000:14:00.0: System wakeup disabled by ACPI
[    0.524870] pci 0000:00:17.1: PCI bridge to [bus 14]
[    0.524890] pci 0000:00:17.1:   bridge window [io  0x8000-0x8fff]
[    0.524909] pci 0000:00:17.1:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.524945] pci 0000:00:17.1:   bridge window [mem 0x3b600000-0x3b7fffff 64bit pref]
[    0.525032] pci 0000:00:17.2: PCI bridge to [bus 15]
[    0.525052] pci 0000:00:17.2:   bridge window [io  0xc000-0xcfff]
[    0.525071] pci 0000:00:17.2:   bridge window [mem 0xfb800000-0xfb8fffff]
[    0.525106] pci 0000:00:17.2:   bridge window [mem 0xcfc00000-0xcfcfffff 64bit pref]
[    0.525191] pci 0000:00:17.3: PCI bridge to [bus 16]
[    0.525234] pci 0000:00:17.3:   bridge window [mem 0xfb400000-0xfb4fffff]
[    0.525280] pci 0000:00:17.3:   bridge window [mem 0xcf800000-0xcf8fffff 64bit pref]
[    0.525528] pci 0000:00:17.4: PCI bridge to [bus 17]
[    0.525564] pci 0000:00:17.4:   bridge window [mem 0xfb000000-0xfb0fffff]
[    0.525599] pci 0000:00:17.4:   bridge window [mem 0xcf400000-0xcf4fffff 64bit pref]
[    0.525790] pci 0000:00:17.5: PCI bridge to [bus 18]
[    0.525826] pci 0000:00:17.5:   bridge window [mem 0xfac00000-0xfacfffff]
[    0.525862] pci 0000:00:17.5:   bridge window [mem 0xcf000000-0xcf0fffff 64bit pref]
[    0.525942] pci 0000:00:17.6: PCI bridge to [bus 19]
[    0.525991] pci 0000:00:17.6:   bridge window [mem 0xfa800000-0xfa8fffff]
[    0.526030] pci 0000:00:17.6:   bridge window [mem 0xcec00000-0xcecfffff 64bit pref]
[    0.526112] pci 0000:00:17.7: PCI bridge to [bus 1a]
[    0.526148] pci 0000:00:17.7:   bridge window [mem 0xfa400000-0xfa4fffff]
[    0.526183] pci 0000:00:17.7:   bridge window [mem 0xce800000-0xce8fffff 64bit pref]
[    0.526307] pci 0000:1b:00.0: [15ad:0779] type 00 class 0x0c0330
[    0.526768] pci 0000:1b:00.0: reg 0x10: [mem 0xfbfe0000-0xfbffffff 64bit]
[    0.528779] pci 0000:1b:00.0: PME# supported from D0 D3hot D3cold
[    0.528834] pci 0000:1b:00.0: System wakeup disabled by ACPI
[    0.528891] pci 0000:1b:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.528938] pci 0000:00:18.0: PCI bridge to [bus 1b]
[    0.528974] pci 0000:00:18.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.529011] pci 0000:00:18.0:   bridge window [mem 0x3f800000-0x3f9fffff 64bit pref]
[    0.529136] pci 0000:1c:00.0: [8086:10d3] type 00 class 0x020000
[    0.529712] pci 0000:1c:00.0: reg 0x10: [mem 0xfbba0000-0xfbbbffff]
[    0.530490] pci 0000:1c:00.0: reg 0x14: [mem 0xfbbc0000-0xfbbdffff]
[    0.530846] pci 0000:1c:00.0: reg 0x18: [io  0x9000-0x901f]
[    0.531520] pci 0000:1c:00.0: reg 0x1c: [mem 0xfbbfc000-0xfbbfffff]
[    0.532742] pci 0000:1c:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.532920] pci 0000:1c:00.0: System wakeup disabled by ACPI
[    0.533035] pci 0000:00:18.1: PCI bridge to [bus 1c]
[    0.533055] pci 0000:00:18.1:   bridge window [io  0x9000-0x9fff]
[    0.533074] pci 0000:00:18.1:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.533110] pci 0000:00:18.1:   bridge window [mem 0x3fa00000-0x3fbfffff 64bit pref]
[    0.533199] pci 0000:00:18.2: PCI bridge to [bus 1d]
[    0.533221] pci 0000:00:18.2:   bridge window [io  0xd000-0xdfff]
[    0.533240] pci 0000:00:18.2:   bridge window [mem 0xfb700000-0xfb7fffff]
[    0.533276] pci 0000:00:18.2:   bridge window [mem 0xcfb00000-0xcfbfffff 64bit pref]
[    0.533560] pci 0000:00:18.3: PCI bridge to [bus 1e]
[    0.533598] pci 0000:00:18.3:   bridge window [mem 0xfb300000-0xfb3fffff]
[    0.533633] pci 0000:00:18.3:   bridge window [mem 0xcf700000-0xcf7fffff 64bit pref]
[    0.533907] pci 0000:00:18.4: PCI bridge to [bus 1f]
[    0.533945] pci 0000:00:18.4:   bridge window [mem 0xfaf00000-0xfaffffff]
[    0.533980] pci 0000:00:18.4:   bridge window [mem 0xcf300000-0xcf3fffff 64bit pref]
[    0.534066] pci 0000:00:18.5: PCI bridge to [bus 20]
[    0.534105] pci 0000:00:18.5:   bridge window [mem 0xfab00000-0xfabfffff]
[    0.534140] pci 0000:00:18.5:   bridge window [mem 0xcef00000-0xceffffff 64bit pref]
[    0.534226] pci 0000:00:18.6: PCI bridge to [bus 21]
[    0.534263] pci 0000:00:18.6:   bridge window [mem 0xfa700000-0xfa7fffff]
[    0.534299] pci 0000:00:18.6:   bridge window [mem 0xceb00000-0xcebfffff 64bit pref]
[    0.534572] pci 0000:00:18.7: PCI bridge to [bus 22]
[    0.534611] pci 0000:00:18.7:   bridge window [mem 0xfa300000-0xfa3fffff]
[    0.534646] pci 0000:00:18.7:   bridge window [mem 0xce700000-0xce7fffff 64bit pref]
[    0.535935] pci_bus 0000:00: on NUMA node 0
[    0.536115] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 14 15), disabled.
[    0.536171] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 14 15), disabled.
[    0.536227] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15), disabled.
[    0.536283] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15), disabled.
[    0.541026] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.541274] vgaarb: setting as boot device: PCI:0000:00:0f.0
[    0.541277] vgaarb: device added: PCI:0000:00:0f.0,decodes=io+mem,owns=io+mem,locks=none
[    0.541305] vgaarb: device added: PCI:0000:13:00.0,decodes=io+mem,owns=none,locks=none
[    0.541307] vgaarb: loaded
[    0.541309] vgaarb: bridge control possible 0000:13:00.0
[    0.541310] vgaarb: no bridge control possible 0000:00:0f.0
[    0.541418] SCSI subsystem initialized
[    0.541527] libata version 3.00 loaded.
[    0.541661] pps_core: LinuxPPS API ver. 1 registered
[    0.541663] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.541685] PTP clock support registered
[    0.541808] PCI: Using ACPI for IRQ routing
[    0.566051] PCI: pci_cache_line_size set to 64 bytes
[    0.566886] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.566892] e820: reserve RAM buffer [mem 0x3aee0000-0x3bffffff]
[    0.566894] e820: reserve RAM buffer [mem 0x3b000000-0x3bffffff]
[    0.566897] e820: reserve RAM buffer [mem 0x305000000-0x307ffffff]
[    0.567146] clocksource: Switched to clocksource hpet
[    0.567239] AppArmor: AppArmor Filesystem Enabled
[    0.567298] pnp: PnP ACPI init
[    0.567383] system 00:00: [io  0x1000-0x103f] could not be reserved
[    0.567387] system 00:00: [io  0x1040-0x104f] has been reserved
[    0.567390] system 00:00: [io  0x0cf0-0x0cf1] has been reserved
[    0.567395] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.567443] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.567487] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.567530] pnp 00:03: Plug and Play ACPI device, IDs VMW0003 PNP0f13 (active)
[    0.567611] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.567616] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.568232] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.568319] system 00:06: [io  0xfce0-0xfcff] has been reserved
[    0.568324] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.568328] system 00:06: [mem 0xfe800000-0xfe9fffff] has been reserved
[    0.568333] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.571209] pnp: PnP ACPI: found 7 devices
[    0.580352] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.580408] pci 0000:00:15.4: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
[    0.580463] pci 0000:00:15.5: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[    0.580518] pci 0000:00:15.6: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
[    0.580571] pci 0000:00:15.7: bridge window [io  0x1000-0x0fff] to [bus 0a] add_size 1000
[    0.580627] pci 0000:00:16.1: bridge window [io  0x1000-0x0fff] to [bus 0c] add_size 1000
[    0.580683] pci 0000:00:16.3: bridge window [io  0x1000-0x0fff] to [bus 0e] add_size 1000
[    0.580737] pci 0000:00:16.4: bridge window [io  0x1000-0x0fff] to [bus 0f] add_size 1000
[    0.580792] pci 0000:00:16.5: bridge window [io  0x1000-0x0fff] to [bus 10] add_size 1000
[    0.580846] pci 0000:00:16.6: bridge window [io  0x1000-0x0fff] to [bus 11] add_size 1000
[    0.580899] pci 0000:00:16.7: bridge window [io  0x1000-0x0fff] to [bus 12] add_size 1000
[    0.580954] pci 0000:00:17.3: bridge window [io  0x1000-0x0fff] to [bus 16] add_size 1000
[    0.581009] pci 0000:00:17.4: bridge window [io  0x1000-0x0fff] to [bus 17] add_size 1000
[    0.581062] pci 0000:00:17.5: bridge window [io  0x1000-0x0fff] to [bus 18] add_size 1000
[    0.581114] pci 0000:00:17.6: bridge window [io  0x1000-0x0fff] to [bus 19] add_size 1000
[    0.581176] pci 0000:00:17.7: bridge window [io  0x1000-0x0fff] to [bus 1a] add_size 1000
[    0.581229] pci 0000:00:18.0: bridge window [io  0x1000-0x0fff] to [bus 1b] add_size 1000
[    0.581284] pci 0000:00:18.3: bridge window [io  0x1000-0x0fff] to [bus 1e] add_size 1000
[    0.581340] pci 0000:00:18.4: bridge window [io  0x1000-0x0fff] to [bus 1f] add_size 1000
[    0.581395] pci 0000:00:18.5: bridge window [io  0x1000-0x0fff] to [bus 20] add_size 1000
[    0.581447] pci 0000:00:18.6: bridge window [io  0x1000-0x0fff] to [bus 21] add_size 1000
[    0.581500] pci 0000:00:18.7: bridge window [io  0x1000-0x0fff] to [bus 22] add_size 1000
[    0.581513] pci 0000:00:15.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581515] pci 0000:00:15.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581517] pci 0000:00:15.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581519] pci 0000:00:15.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581521] pci 0000:00:15.6: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581523] pci 0000:00:15.6: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581525] pci 0000:00:15.7: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581527] pci 0000:00:15.7: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581528] pci 0000:00:16.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581530] pci 0000:00:16.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581532] pci 0000:00:16.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581534] pci 0000:00:16.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581536] pci 0000:00:16.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581537] pci 0000:00:16.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581539] pci 0000:00:16.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581541] pci 0000:00:16.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581543] pci 0000:00:16.6: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581545] pci 0000:00:16.6: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581546] pci 0000:00:16.7: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581548] pci 0000:00:16.7: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581550] pci 0000:00:17.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581552] pci 0000:00:17.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581554] pci 0000:00:17.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581555] pci 0000:00:17.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581557] pci 0000:00:17.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581559] pci 0000:00:17.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581561] pci 0000:00:17.6: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581563] pci 0000:00:17.6: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581564] pci 0000:00:17.7: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581566] pci 0000:00:17.7: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581568] pci 0000:00:18.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581570] pci 0000:00:18.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581571] pci 0000:00:18.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581573] pci 0000:00:18.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581575] pci 0000:00:18.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581577] pci 0000:00:18.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581579] pci 0000:00:18.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581580] pci 0000:00:18.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581582] pci 0000:00:18.6: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581584] pci 0000:00:18.6: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581586] pci 0000:00:18.7: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581587] pci 0000:00:18.7: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.581593] pci 0000:00:0f.0: BAR 6: assigned [mem 0x3fc00000-0x3fc07fff pref]
[    0.581597] pci 0000:00:15.4: BAR 13: no space for [io  size 0x1000]
[    0.581599] pci 0000:00:15.4: BAR 13: failed to assign [io  size 0x1000]
[    0.581601] pci 0000:00:15.5: BAR 13: no space for [io  size 0x1000]
[    0.581603] pci 0000:00:15.5: BAR 13: failed to assign [io  size 0x1000]
[    0.581606] pci 0000:00:15.6: BAR 13: no space for [io  size 0x1000]
[    0.581607] pci 0000:00:15.6: BAR 13: failed to assign [io  size 0x1000]
[    0.581609] pci 0000:00:15.7: BAR 13: no space for [io  size 0x1000]
[    0.581611] pci 0000:00:15.7: BAR 13: failed to assign [io  size 0x1000]
[    0.581613] pci 0000:00:16.1: BAR 13: no space for [io  size 0x1000]
[    0.581615] pci 0000:00:16.1: BAR 13: failed to assign [io  size 0x1000]
[    0.581617] pci 0000:00:16.3: BAR 13: no space for [io  size 0x1000]
[    0.581619] pci 0000:00:16.3: BAR 13: failed to assign [io  size 0x1000]
[    0.581621] pci 0000:00:16.4: BAR 13: no space for [io  size 0x1000]
[    0.581623] pci 0000:00:16.4: BAR 13: failed to assign [io  size 0x1000]
[    0.581625] pci 0000:00:16.5: BAR 13: no space for [io  size 0x1000]
[    0.581627] pci 0000:00:16.5: BAR 13: failed to assign [io  size 0x1000]
[    0.581629] pci 0000:00:16.6: BAR 13: no space for [io  size 0x1000]
[    0.581631] pci 0000:00:16.6: BAR 13: failed to assign [io  size 0x1000]
[    0.581633] pci 0000:00:16.7: BAR 13: no space for [io  size 0x1000]
[    0.581634] pci 0000:00:16.7: BAR 13: failed to assign [io  size 0x1000]
[    0.581637] pci 0000:00:17.3: BAR 13: no space for [io  size 0x1000]
[    0.581638] pci 0000:00:17.3: BAR 13: failed to assign [io  size 0x1000]
[    0.581640] pci 0000:00:17.4: BAR 13: no space for [io  size 0x1000]
[    0.581642] pci 0000:00:17.4: BAR 13: failed to assign [io  size 0x1000]
[    0.581644] pci 0000:00:17.5: BAR 13: no space for [io  size 0x1000]
[    0.581646] pci 0000:00:17.5: BAR 13: failed to assign [io  size 0x1000]
[    0.581648] pci 0000:00:17.6: BAR 13: no space for [io  size 0x1000]
[    0.581650] pci 0000:00:17.6: BAR 13: failed to assign [io  size 0x1000]
[    0.581652] pci 0000:00:17.7: BAR 13: no space for [io  size 0x1000]
[    0.581654] pci 0000:00:17.7: BAR 13: failed to assign [io  size 0x1000]
[    0.581656] pci 0000:00:18.0: BAR 13: no space for [io  size 0x1000]
[    0.581658] pci 0000:00:18.0: BAR 13: failed to assign [io  size 0x1000]
[    0.581668] pci 0000:00:18.3: BAR 13: no space for [io  size 0x1000]
[    0.581669] pci 0000:00:18.3: BAR 13: failed to assign [io  size 0x1000]
[    0.581672] pci 0000:00:18.4: BAR 13: no space for [io  size 0x1000]
[    0.581673] pci 0000:00:18.4: BAR 13: failed to assign [io  size 0x1000]
[    0.581675] pci 0000:00:18.5: BAR 13: no space for [io  size 0x1000]
[    0.581677] pci 0000:00:18.5: BAR 13: failed to assign [io  size 0x1000]
[    0.581679] pci 0000:00:18.6: BAR 13: no space for [io  size 0x1000]
[    0.581681] pci 0000:00:18.6: BAR 13: failed to assign [io  size 0x1000]
[    0.581683] pci 0000:00:18.7: BAR 13: no space for [io  size 0x1000]
[    0.581685] pci 0000:00:18.7: BAR 13: failed to assign [io  size 0x1000]
[    0.581690] pci 0000:00:18.7: BAR 13: no space for [io  size 0x1000]
[    0.581692] pci 0000:00:18.7: BAR 13: failed to assign [io  size 0x1000]
[    0.581694] pci 0000:00:18.6: BAR 13: no space for [io  size 0x1000]
[    0.581696] pci 0000:00:18.6: BAR 13: failed to assign [io  size 0x1000]
[    0.581698] pci 0000:00:18.5: BAR 13: no space for [io  size 0x1000]
[    0.581700] pci 0000:00:18.5: BAR 13: failed to assign [io  size 0x1000]
[    0.581702] pci 0000:00:18.4: BAR 13: no space for [io  size 0x1000]
[    0.581704] pci 0000:00:18.4: BAR 13: failed to assign [io  size 0x1000]
[    0.581706] pci 0000:00:18.3: BAR 13: no space for [io  size 0x1000]
[    0.581707] pci 0000:00:18.3: BAR 13: failed to assign [io  size 0x1000]
[    0.581710] pci 0000:00:18.0: BAR 13: no space for [io  size 0x1000]
[    0.581711] pci 0000:00:18.0: BAR 13: failed to assign [io  size 0x1000]
[    0.581714] pci 0000:00:17.7: BAR 13: no space for [io  size 0x1000]
[    0.581715] pci 0000:00:17.7: BAR 13: failed to assign [io  size 0x1000]
[    0.581718] pci 0000:00:17.6: BAR 13: no space for [io  size 0x1000]
[    0.581719] pci 0000:00:17.6: BAR 13: failed to assign [io  size 0x1000]
[    0.581722] pci 0000:00:17.5: BAR 13: no space for [io  size 0x1000]
[    0.581723] pci 0000:00:17.5: BAR 13: failed to assign [io  size 0x1000]
[    0.581726] pci 0000:00:17.4: BAR 13: no space for [io  size 0x1000]
[    0.581727] pci 0000:00:17.4: BAR 13: failed to assign [io  size 0x1000]
[    0.581730] pci 0000:00:17.3: BAR 13: no space for [io  size 0x1000]
[    0.581731] pci 0000:00:17.3: BAR 13: failed to assign [io  size 0x1000]
[    0.581734] pci 0000:00:16.7: BAR 13: no space for [io  size 0x1000]
[    0.581735] pci 0000:00:16.7: BAR 13: failed to assign [io  size 0x1000]
[    0.581738] pci 0000:00:16.6: BAR 13: no space for [io  size 0x1000]
[    0.581739] pci 0000:00:16.6: BAR 13: failed to assign [io  size 0x1000]
[    0.581742] pci 0000:00:16.5: BAR 13: no space for [io  size 0x1000]
[    0.581743] pci 0000:00:16.5: BAR 13: failed to assign [io  size 0x1000]
[    0.581745] pci 0000:00:16.4: BAR 13: no space for [io  size 0x1000]
[    0.581747] pci 0000:00:16.4: BAR 13: failed to assign [io  size 0x1000]
[    0.581749] pci 0000:00:16.3: BAR 13: no space for [io  size 0x1000]
[    0.581751] pci 0000:00:16.3: BAR 13: failed to assign [io  size 0x1000]
[    0.581753] pci 0000:00:16.1: BAR 13: no space for [io  size 0x1000]
[    0.581755] pci 0000:00:16.1: BAR 13: failed to assign [io  size 0x1000]
[    0.581757] pci 0000:00:15.7: BAR 13: no space for [io  size 0x1000]
[    0.581759] pci 0000:00:15.7: BAR 13: failed to assign [io  size 0x1000]
[    0.581761] pci 0000:00:15.6: BAR 13: no space for [io  size 0x1000]
[    0.581763] pci 0000:00:15.6: BAR 13: failed to assign [io  size 0x1000]
[    0.581765] pci 0000:00:15.5: BAR 13: no space for [io  size 0x1000]
[    0.581767] pci 0000:00:15.5: BAR 13: failed to assign [io  size 0x1000]
[    0.581769] pci 0000:00:15.4: BAR 13: no space for [io  size 0x1000]
[    0.581770] pci 0000:00:15.4: BAR 13: failed to assign [io  size 0x1000]
[    0.581774] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.581829] pci 0000:02:03.0: BAR 6: assigned [mem 0xfd500000-0xfd50ffff pref]
[    0.581834] pci 0000:00:11.0: PCI bridge to [bus 02]
[    0.581845] pci 0000:00:11.0:   bridge window [io  0x2000-0x3fff]
[    0.581873] pci 0000:00:11.0:   bridge window [mem 0xfd500000-0xfdffffff]
[    0.581892] pci 0000:00:11.0:   bridge window [mem 0xe7b00000-0xe7ffffff 64bit pref]
[    0.581928] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.581938] pci 0000:00:15.0:   bridge window [io  0x4000-0x4fff]
[    0.581965] pci 0000:00:15.0:   bridge window [mem 0xfd400000-0xfd4fffff]
[    0.581984] pci 0000:00:15.0:   bridge window [mem 0x3b000000-0x3b1fffff 64bit pref]
[    0.582040] pci 0000:00:15.1: PCI bridge to [bus 04]
[    0.582053] pci 0000:00:15.1:   bridge window [io  0x7000-0x7fff]
[    0.582080] pci 0000:00:15.1:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.582099] pci 0000:00:15.1:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    0.582140] pci 0000:00:15.2: PCI bridge to [bus 05]
[    0.582150] pci 0000:00:15.2:   bridge window [io  0xa000-0xafff]
[    0.582181] pci 0000:00:15.2:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.582200] pci 0000:00:15.2:   bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
[    0.582242] pci 0000:00:15.3: PCI bridge to [bus 06]
[    0.582254] pci 0000:00:15.3:   bridge window [io  0xe000-0xefff]
[    0.582281] pci 0000:00:15.3:   bridge window [mem 0xfb600000-0xfb6fffff]
[    0.582300] pci 0000:00:15.3:   bridge window [mem 0xcfa00000-0xcfafffff 64bit pref]
[    0.582340] pci 0000:00:15.4: PCI bridge to [bus 07]
[    0.582368] pci 0000:00:15.4:   bridge window [mem 0xfb200000-0xfb2fffff]
[    0.582387] pci 0000:00:15.4:   bridge window [mem 0xcf600000-0xcf6fffff 64bit pref]
[    0.582427] pci 0000:00:15.5: PCI bridge to [bus 08]
[    0.582454] pci 0000:00:15.5:   bridge window [mem 0xfae00000-0xfaefffff]
[    0.582473] pci 0000:00:15.5:   bridge window [mem 0xcf200000-0xcf2fffff 64bit pref]
[    0.582513] pci 0000:00:15.6: PCI bridge to [bus 09]
[    0.582540] pci 0000:00:15.6:   bridge window [mem 0xfaa00000-0xfaafffff]
[    0.582559] pci 0000:00:15.6:   bridge window [mem 0xcee00000-0xceefffff 64bit pref]
[    0.582599] pci 0000:00:15.7: PCI bridge to [bus 0a]
[    0.582626] pci 0000:00:15.7:   bridge window [mem 0xfa600000-0xfa6fffff]
[    0.582645] pci 0000:00:15.7:   bridge window [mem 0xcea00000-0xceafffff 64bit pref]
[    0.582686] pci 0000:0b:00.0: BAR 6: assigned [mem 0xfd300000-0xfd30ffff pref]
[    0.582688] pci 0000:00:16.0: PCI bridge to [bus 0b]
[    0.582699] pci 0000:00:16.0:   bridge window [io  0x5000-0x5fff]
[    0.582726] pci 0000:00:16.0:   bridge window [mem 0xfd300000-0xfd3fffff]
[    0.582744] pci 0000:00:16.0:   bridge window [mem 0x3b200000-0x3b3fffff 64bit pref]
[    0.582785] pci 0000:00:16.1: PCI bridge to [bus 0c]
[    0.582812] pci 0000:00:16.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.582831] pci 0000:00:16.1:   bridge window [mem 0x3b400000-0x3b5fffff 64bit pref]
[    0.582871] pci 0000:00:16.2: PCI bridge to [bus 0d]
[    0.582881] pci 0000:00:16.2:   bridge window [io  0xb000-0xbfff]
[    0.582908] pci 0000:00:16.2:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.582927] pci 0000:00:16.2:   bridge window [mem 0xcfd00000-0xcfdfffff 64bit pref]
[    0.582967] pci 0000:00:16.3: PCI bridge to [bus 0e]
[    0.582995] pci 0000:00:16.3:   bridge window [mem 0xfb500000-0xfb5fffff]
[    0.583013] pci 0000:00:16.3:   bridge window [mem 0xcf900000-0xcf9fffff 64bit pref]
[    0.583053] pci 0000:00:16.4: PCI bridge to [bus 0f]
[    0.583080] pci 0000:00:16.4:   bridge window [mem 0xfb100000-0xfb1fffff]
[    0.583099] pci 0000:00:16.4:   bridge window [mem 0xcf500000-0xcf5fffff 64bit pref]
[    0.583139] pci 0000:00:16.5: PCI bridge to [bus 10]
[    0.583164] pci 0000:00:16.5:   bridge window [mem 0xfad00000-0xfadfffff]
[    0.583183] pci 0000:00:16.5:   bridge window [mem 0xcf100000-0xcf1fffff 64bit pref]
[    0.583224] pci 0000:00:16.6: PCI bridge to [bus 11]
[    0.583253] pci 0000:00:16.6:   bridge window [mem 0xfa900000-0xfa9fffff]
[    0.583272] pci 0000:00:16.6:   bridge window [mem 0xced00000-0xcedfffff 64bit pref]
[    0.583312] pci 0000:00:16.7: PCI bridge to [bus 12]
[    0.583339] pci 0000:00:16.7:   bridge window [mem 0xfa500000-0xfa5fffff]
[    0.583358] pci 0000:00:16.7:   bridge window [mem 0xce900000-0xce9fffff 64bit pref]
[    0.583399] pci 0000:00:17.0: PCI bridge to [bus 13]
[    0.583409] pci 0000:00:17.0:   bridge window [io  0x6000-0x6fff]
[    0.583436] pci 0000:00:17.0:   bridge window [mem 0xfc000000-0xfcffffff]
[    0.583455] pci 0000:00:17.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.583497] pci 0000:14:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc0ffff pref]
[    0.583498] pci 0000:00:17.1: PCI bridge to [bus 14]
[    0.583509] pci 0000:00:17.1:   bridge window [io  0x8000-0x8fff]
[    0.583536] pci 0000:00:17.1:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.583554] pci 0000:00:17.1:   bridge window [mem 0x3b600000-0x3b7fffff 64bit pref]
[    0.583595] pci 0000:00:17.2: PCI bridge to [bus 15]
[    0.583606] pci 0000:00:17.2:   bridge window [io  0xc000-0xcfff]
[    0.583633] pci 0000:00:17.2:   bridge window [mem 0xfb800000-0xfb8fffff]
[    0.583651] pci 0000:00:17.2:   bridge window [mem 0xcfc00000-0xcfcfffff 64bit pref]
[    0.583691] pci 0000:00:17.3: PCI bridge to [bus 16]
[    0.583719] pci 0000:00:17.3:   bridge window [mem 0xfb400000-0xfb4fffff]
[    0.583737] pci 0000:00:17.3:   bridge window [mem 0xcf800000-0xcf8fffff 64bit pref]
[    0.583777] pci 0000:00:17.4: PCI bridge to [bus 17]
[    0.583805] pci 0000:00:17.4:   bridge window [mem 0xfb000000-0xfb0fffff]
[    0.583823] pci 0000:00:17.4:   bridge window [mem 0xcf400000-0xcf4fffff 64bit pref]
[    0.583863] pci 0000:00:17.5: PCI bridge to [bus 18]
[    0.583891] pci 0000:00:17.5:   bridge window [mem 0xfac00000-0xfacfffff]
[    0.583909] pci 0000:00:17.5:   bridge window [mem 0xcf000000-0xcf0fffff 64bit pref]
[    0.583950] pci 0000:00:17.6: PCI bridge to [bus 19]
[    0.583977] pci 0000:00:17.6:   bridge window [mem 0xfa800000-0xfa8fffff]
[    0.583996] pci 0000:00:17.6:   bridge window [mem 0xcec00000-0xcecfffff 64bit pref]
[    0.584035] pci 0000:00:17.7: PCI bridge to [bus 1a]
[    0.584063] pci 0000:00:17.7:   bridge window [mem 0xfa400000-0xfa4fffff]
[    0.584081] pci 0000:00:17.7:   bridge window [mem 0xce800000-0xce8fffff 64bit pref]
[    0.584122] pci 0000:00:18.0: PCI bridge to [bus 1b]
[    0.584124] pci 0000:00:18.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.584175] pci 0000:00:18.0:   bridge window [mem 0x3f800000-0x3f9fffff 64bit pref]
[    0.584218] pci 0000:1c:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb0ffff pref]
[    0.584219] pci 0000:00:18.1: PCI bridge to [bus 1c]
[    0.584231] pci 0000:00:18.1:   bridge window [io  0x9000-0x9fff]
[    0.584258] pci 0000:00:18.1:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.584277] pci 0000:00:18.1:   bridge window [mem 0x3fa00000-0x3fbfffff 64bit pref]
[    0.584318] pci 0000:00:18.2: PCI bridge to [bus 1d]
[    0.584328] pci 0000:00:18.2:   bridge window [io  0xd000-0xdfff]
[    0.584355] pci 0000:00:18.2:   bridge window [mem 0xfb700000-0xfb7fffff]
[    0.584374] pci 0000:00:18.2:   bridge window [mem 0xcfb00000-0xcfbfffff 64bit pref]
[    0.584425] pci 0000:00:18.3: PCI bridge to [bus 1e]
[    0.584453] pci 0000:00:18.3:   bridge window [mem 0xfb300000-0xfb3fffff]
[    0.584472] pci 0000:00:18.3:   bridge window [mem 0xcf700000-0xcf7fffff 64bit pref]
[    0.584513] pci 0000:00:18.4: PCI bridge to [bus 1f]
[    0.584540] pci 0000:00:18.4:   bridge window [mem 0xfaf00000-0xfaffffff]
[    0.584559] pci 0000:00:18.4:   bridge window [mem 0xcf300000-0xcf3fffff 64bit pref]
[    0.584599] pci 0000:00:18.5: PCI bridge to [bus 20]
[    0.584626] pci 0000:00:18.5:   bridge window [mem 0xfab00000-0xfabfffff]
[    0.584645] pci 0000:00:18.5:   bridge window [mem 0xcef00000-0xceffffff 64bit pref]
[    0.584685] pci 0000:00:18.6: PCI bridge to [bus 21]
[    0.584712] pci 0000:00:18.6:   bridge window [mem 0xfa700000-0xfa7fffff]
[    0.584731] pci 0000:00:18.6:   bridge window [mem 0xceb00000-0xcebfffff 64bit pref]
[    0.584770] pci 0000:00:18.7: PCI bridge to [bus 22]
[    0.584798] pci 0000:00:18.7:   bridge window [mem 0xfa300000-0xfa3fffff]
[    0.584816] pci 0000:00:18.7:   bridge window [mem 0xce700000-0xce7fffff 64bit pref]
[    0.584858] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window]
[    0.584860] pci_bus 0000:00: resource 5 [mem 0x000d0000-0x000d3fff window]
[    0.584862] pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff window]
[    0.584863] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window]
[    0.584865] pci_bus 0000:00: resource 8 [mem 0x3b000000-0xfebfffff window]
[    0.584867] pci_bus 0000:00: resource 9 [io  0x0000-0x0cf7 window]
[    0.584869] pci_bus 0000:00: resource 10 [io  0x0d00-0xfeff window]
[    0.584871] pci_bus 0000:02: resource 0 [io  0x2000-0x3fff]
[    0.584873] pci_bus 0000:02: resource 1 [mem 0xfd500000-0xfdffffff]
[    0.584874] pci_bus 0000:02: resource 2 [mem 0xe7b00000-0xe7ffffff 64bit pref]
[    0.584876] pci_bus 0000:02: resource 4 [mem 0x000a0000-0x000bffff window]
[    0.584878] pci_bus 0000:02: resource 5 [mem 0x000d0000-0x000d3fff window]
[    0.584880] pci_bus 0000:02: resource 6 [mem 0x000d4000-0x000d7fff window]
[    0.584881] pci_bus 0000:02: resource 7 [mem 0x000d8000-0x000dbfff window]
[    0.584883] pci_bus 0000:02: resource 8 [mem 0x3b000000-0xfebfffff window]
[    0.584885] pci_bus 0000:02: resource 9 [io  0x0000-0x0cf7 window]
[    0.584886] pci_bus 0000:02: resource 10 [io  0x0d00-0xfeff window]
[    0.584888] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    0.584890] pci_bus 0000:03: resource 1 [mem 0xfd400000-0xfd4fffff]
[    0.584892] pci_bus 0000:03: resource 2 [mem 0x3b000000-0x3b1fffff 64bit pref]
[    0.584894] pci_bus 0000:04: resource 0 [io  0x7000-0x7fff]
[    0.584896] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.584897] pci_bus 0000:04: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
[    0.584899] pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
[    0.584901] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff]
[    0.584903] pci_bus 0000:05: resource 2 [mem 0xcfe00000-0xcfefffff 64bit pref]
[    0.584905] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
[    0.584906] pci_bus 0000:06: resource 1 [mem 0xfb600000-0xfb6fffff]
[    0.584908] pci_bus 0000:06: resource 2 [mem 0xcfa00000-0xcfafffff 64bit pref]
[    0.584910] pci_bus 0000:07: resource 1 [mem 0xfb200000-0xfb2fffff]
[    0.584912] pci_bus 0000:07: resource 2 [mem 0xcf600000-0xcf6fffff 64bit pref]
[    0.584913] pci_bus 0000:08: resource 1 [mem 0xfae00000-0xfaefffff]
[    0.584915] pci_bus 0000:08: resource 2 [mem 0xcf200000-0xcf2fffff 64bit pref]
[    0.584917] pci_bus 0000:09: resource 1 [mem 0xfaa00000-0xfaafffff]
[    0.584919] pci_bus 0000:09: resource 2 [mem 0xcee00000-0xceefffff 64bit pref]
[    0.584920] pci_bus 0000:0a: resource 1 [mem 0xfa600000-0xfa6fffff]
[    0.584922] pci_bus 0000:0a: resource 2 [mem 0xcea00000-0xceafffff 64bit pref]
[    0.584924] pci_bus 0000:0b: resource 0 [io  0x5000-0x5fff]
[    0.584925] pci_bus 0000:0b: resource 1 [mem 0xfd300000-0xfd3fffff]
[    0.584927] pci_bus 0000:0b: resource 2 [mem 0x3b200000-0x3b3fffff 64bit pref]
[    0.584929] pci_bus 0000:0c: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.584931] pci_bus 0000:0c: resource 2 [mem 0x3b400000-0x3b5fffff 64bit pref]
[    0.584932] pci_bus 0000:0d: resource 0 [io  0xb000-0xbfff]
[    0.584934] pci_bus 0000:0d: resource 1 [mem 0xfb900000-0xfb9fffff]
[    0.584936] pci_bus 0000:0d: resource 2 [mem 0xcfd00000-0xcfdfffff 64bit pref]
[    0.584938] pci_bus 0000:0e: resource 1 [mem 0xfb500000-0xfb5fffff]
[    0.584939] pci_bus 0000:0e: resource 2 [mem 0xcf900000-0xcf9fffff 64bit pref]
[    0.584941] pci_bus 0000:0f: resource 1 [mem 0xfb100000-0xfb1fffff]
[    0.584943] pci_bus 0000:0f: resource 2 [mem 0xcf500000-0xcf5fffff 64bit pref]
[    0.584945] pci_bus 0000:10: resource 1 [mem 0xfad00000-0xfadfffff]
[    0.584946] pci_bus 0000:10: resource 2 [mem 0xcf100000-0xcf1fffff 64bit pref]
[    0.584948] pci_bus 0000:11: resource 1 [mem 0xfa900000-0xfa9fffff]
[    0.584950] pci_bus 0000:11: resource 2 [mem 0xced00000-0xcedfffff 64bit pref]
[    0.584952] pci_bus 0000:12: resource 1 [mem 0xfa500000-0xfa5fffff]
[    0.584953] pci_bus 0000:12: resource 2 [mem 0xce900000-0xce9fffff 64bit pref]
[    0.584955] pci_bus 0000:13: resource 0 [io  0x6000-0x6fff]
[    0.584957] pci_bus 0000:13: resource 1 [mem 0xfc000000-0xfcffffff]
[    0.584959] pci_bus 0000:13: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.584960] pci_bus 0000:14: resource 0 [io  0x8000-0x8fff]
[    0.584962] pci_bus 0000:14: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.584964] pci_bus 0000:14: resource 2 [mem 0x3b600000-0x3b7fffff 64bit pref]
[    0.584965] pci_bus 0000:15: resource 0 [io  0xc000-0xcfff]
[    0.584967] pci_bus 0000:15: resource 1 [mem 0xfb800000-0xfb8fffff]
[    0.584969] pci_bus 0000:15: resource 2 [mem 0xcfc00000-0xcfcfffff 64bit pref]
[    0.584971] pci_bus 0000:16: resource 1 [mem 0xfb400000-0xfb4fffff]
[    0.584972] pci_bus 0000:16: resource 2 [mem 0xcf800000-0xcf8fffff 64bit pref]
[    0.584974] pci_bus 0000:17: resource 1 [mem 0xfb000000-0xfb0fffff]
[    0.584976] pci_bus 0000:17: resource 2 [mem 0xcf400000-0xcf4fffff 64bit pref]
[    0.584978] pci_bus 0000:18: resource 1 [mem 0xfac00000-0xfacfffff]
[    0.584979] pci_bus 0000:18: resource 2 [mem 0xcf000000-0xcf0fffff 64bit pref]
[    0.584981] pci_bus 0000:19: resource 1 [mem 0xfa800000-0xfa8fffff]
[    0.584983] pci_bus 0000:19: resource 2 [mem 0xcec00000-0xcecfffff 64bit pref]
[    0.584985] pci_bus 0000:1a: resource 1 [mem 0xfa400000-0xfa4fffff]
[    0.584986] pci_bus 0000:1a: resource 2 [mem 0xce800000-0xce8fffff 64bit pref]
[    0.584988] pci_bus 0000:1b: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.584990] pci_bus 0000:1b: resource 2 [mem 0x3f800000-0x3f9fffff 64bit pref]
[    0.584992] pci_bus 0000:1c: resource 0 [io  0x9000-0x9fff]
[    0.584993] pci_bus 0000:1c: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.584995] pci_bus 0000:1c: resource 2 [mem 0x3fa00000-0x3fbfffff 64bit pref]
[    0.584997] pci_bus 0000:1d: resource 0 [io  0xd000-0xdfff]
[    0.584998] pci_bus 0000:1d: resource 1 [mem 0xfb700000-0xfb7fffff]
[    0.585000] pci_bus 0000:1d: resource 2 [mem 0xcfb00000-0xcfbfffff 64bit pref]
[    0.585002] pci_bus 0000:1e: resource 1 [mem 0xfb300000-0xfb3fffff]
[    0.585004] pci_bus 0000:1e: resource 2 [mem 0xcf700000-0xcf7fffff 64bit pref]
[    0.585006] pci_bus 0000:1f: resource 1 [mem 0xfaf00000-0xfaffffff]
[    0.585007] pci_bus 0000:1f: resource 2 [mem 0xcf300000-0xcf3fffff 64bit pref]
[    0.585009] pci_bus 0000:20: resource 1 [mem 0xfab00000-0xfabfffff]
[    0.585011] pci_bus 0000:20: resource 2 [mem 0xcef00000-0xceffffff 64bit pref]
[    0.585012] pci_bus 0000:21: resource 1 [mem 0xfa700000-0xfa7fffff]
[    0.585014] pci_bus 0000:21: resource 2 [mem 0xceb00000-0xcebfffff 64bit pref]
[    0.585016] pci_bus 0000:22: resource 1 [mem 0xfa300000-0xfa3fffff]
[    0.585018] pci_bus 0000:22: resource 2 [mem 0xce700000-0xce7fffff 64bit pref]
[    0.585120] NET: Registered protocol family 2
[    0.585270] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.585326] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.585381] TCP: Hash tables configured (established 131072 bind 65536)
[    0.585410] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.585455] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.585531] NET: Registered protocol family 1
[    0.585699] RPC: Registered named UNIX socket transport module.
[    0.585701] RPC: Registered udp transport module.
[    0.585703] RPC: Registered tcp transport module.
[    0.585704] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.585711] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.585766] pci 0000:00:0f.0: Video device with shadowed ROM
[    0.585822] PCI: CLS mismatch (32 != 64), using 64 bytes
[    0.586207] Trying to unpack rootfs image as initramfs...
[    1.623340] Freeing initrd memory: 28016K (ffff8800364a4000 - ffff880038000000)
[    1.623470] enmrpoalc: module verification failed: signature and/or required key missing - tainting kernel
[    1.639360] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.639364] software IO TLB [mem 0x324a4000-0x364a4000] (64MB) mapped at [ffff8800324a4000-ffff8800364a3fff]
[    1.640222] audit: initializing netlink subsys (disabled)
[    1.640233] audit: type=2000 audit(1589267209.569:1): initialized
[    1.640391] Initialise system trusted keyring
[    1.641994] VFS: Disk quotas dquot_6.6.0
[    1.642012] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.642244] NFS: Registering the id_resolver key type
[    1.642255] Key type id_resolver registered
[    1.642256] Key type id_legacy registered
[    1.646106] async_tx: api initialized (async)
[    1.646114] Key type asymmetric registered
[    1.646118] Asymmetric key parser 'x509' registered
[    1.646135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.646139] io scheduler noop registered
[    1.646143] io scheduler deadline registered
[    1.646148] io scheduler cfq registered (default)
[    1.661963] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[    1.661969] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.661990] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[    1.662076] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[    1.662089] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[    1.662180] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[    1.662193] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[    1.662301] pcieport 0000:00:15.3: Signaling PME through PCIe PME interrupt
[    1.662353] pcie_pme 0000:00:15.3:pcie01: service driver pcie_pme loaded
[    1.662468] pcieport 0000:00:15.4: Signaling PME through PCIe PME interrupt
[    1.662481] pcie_pme 0000:00:15.4:pcie01: service driver pcie_pme loaded
[    1.662613] pcieport 0000:00:15.5: Signaling PME through PCIe PME interrupt
[    1.662626] pcie_pme 0000:00:15.5:pcie01: service driver pcie_pme loaded
[    1.662744] pcieport 0000:00:15.6: Signaling PME through PCIe PME interrupt
[    1.662765] pcie_pme 0000:00:15.6:pcie01: service driver pcie_pme loaded
[    1.662825] pcieport 0000:00:15.7: Signaling PME through PCIe PME interrupt
[    1.662839] pcie_pme 0000:00:15.7:pcie01: service driver pcie_pme loaded
[    1.662951] pcieport 0000:00:16.0: Signaling PME through PCIe PME interrupt
[    1.662955] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
[    1.662978] pcie_pme 0000:00:16.0:pcie01: service driver pcie_pme loaded
[    1.663044] pcieport 0000:00:16.1: Signaling PME through PCIe PME interrupt
[    1.663047] pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
[    1.663060] pcie_pme 0000:00:16.1:pcie01: service driver pcie_pme loaded
[    1.663159] pcieport 0000:00:16.2: Signaling PME through PCIe PME interrupt
[    1.663172] pcie_pme 0000:00:16.2:pcie01: service driver pcie_pme loaded
[    1.663282] pcieport 0000:00:16.3: Signaling PME through PCIe PME interrupt
[    1.663306] pcie_pme 0000:00:16.3:pcie01: service driver pcie_pme loaded
[    1.663406] pcieport 0000:00:16.4: Signaling PME through PCIe PME interrupt
[    1.663419] pcie_pme 0000:00:16.4:pcie01: service driver pcie_pme loaded
[    1.663523] pcieport 0000:00:16.5: Signaling PME through PCIe PME interrupt
[    1.663536] pcie_pme 0000:00:16.5:pcie01: service driver pcie_pme loaded
[    1.663626] pcieport 0000:00:16.6: Signaling PME through PCIe PME interrupt
[    1.663643] pcie_pme 0000:00:16.6:pcie01: service driver pcie_pme loaded
[    1.663721] pcieport 0000:00:16.7: Signaling PME through PCIe PME interrupt
[    1.663738] pcie_pme 0000:00:16.7:pcie01: service driver pcie_pme loaded
[    1.664083] pcieport 0000:00:17.0: Signaling PME through PCIe PME interrupt
[    1.664088] pci 0000:13:00.0: Signaling PME through PCIe PME interrupt
[    1.664121] pcie_pme 0000:00:17.0:pcie01: service driver pcie_pme loaded
[    1.664180] pcieport 0000:00:17.1: Signaling PME through PCIe PME interrupt
[    1.664184] pci 0000:14:00.0: Signaling PME through PCIe PME interrupt
[    1.664206] pcie_pme 0000:00:17.1:pcie01: service driver pcie_pme loaded
[    1.664322] pcieport 0000:00:17.2: Signaling PME through PCIe PME interrupt
[    1.664342] pcie_pme 0000:00:17.2:pcie01: service driver pcie_pme loaded
[    1.664418] pcieport 0000:00:17.3: Signaling PME through PCIe PME interrupt
[    1.664439] pcie_pme 0000:00:17.3:pcie01: service driver pcie_pme loaded
[    1.664537] pcieport 0000:00:17.4: Signaling PME through PCIe PME interrupt
[    1.664550] pcie_pme 0000:00:17.4:pcie01: service driver pcie_pme loaded
[    1.664655] pcieport 0000:00:17.5: Signaling PME through PCIe PME interrupt
[    1.664669] pcie_pme 0000:00:17.5:pcie01: service driver pcie_pme loaded
[    1.664687] pcieport 0000:00:17.6: Signaling PME through PCIe PME interrupt
[    1.664711] pcie_pme 0000:00:17.6:pcie01: service driver pcie_pme loaded
[    1.664790] pcieport 0000:00:17.7: Signaling PME through PCIe PME interrupt
[    1.664803] pcie_pme 0000:00:17.7:pcie01: service driver pcie_pme loaded
[    1.664886] pcieport 0000:00:18.0: Signaling PME through PCIe PME interrupt
[    1.664890] pci 0000:1b:00.0: Signaling PME through PCIe PME interrupt
[    1.664903] pcie_pme 0000:00:18.0:pcie01: service driver pcie_pme loaded
[    1.665139] pcieport 0000:00:18.1: Signaling PME through PCIe PME interrupt
[    1.665144] pci 0000:1c:00.0: Signaling PME through PCIe PME interrupt
[    1.665157] pcie_pme 0000:00:18.1:pcie01: service driver pcie_pme loaded
[    1.665235] pcieport 0000:00:18.2: Signaling PME through PCIe PME interrupt
[    1.665248] pcie_pme 0000:00:18.2:pcie01: service driver pcie_pme loaded
[    1.665306] pcieport 0000:00:18.3: Signaling PME through PCIe PME interrupt
[    1.665306] pcie_pme 0000:00:18.3:pcie01: service driver pcie_pme loaded
[    1.665343] pcieport 0000:00:18.4: Signaling PME through PCIe PME interrupt
[    1.665356] pcie_pme 0000:00:18.4:pcie01: service driver pcie_pme loaded
[    1.665418] pcieport 0000:00:18.5: Signaling PME through PCIe PME interrupt
[    1.665431] pcie_pme 0000:00:18.5:pcie01: service driver pcie_pme loaded
[    1.665513] pcieport 0000:00:18.6: Signaling PME through PCIe PME interrupt
[    1.665537] pcie_pme 0000:00:18.6:pcie01: service driver pcie_pme loaded
[    1.665611] pcieport 0000:00:18.7: Signaling PME through PCIe PME interrupt
[    1.665629] pcie_pme 0000:00:18.7:pcie01: service driver pcie_pme loaded
[    1.745147] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.960639] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.960874] console [ttyS0] enabled
[    1.960943] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 8250
[    1.961098] Linux agpgart interface v0.103
[    1.961145] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[    1.961537] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x0
[    1.968573] brd: module loaded
[    1.968646] Loading iSCSI transport class v2.0-870.
[    1.972052] ahci 0000:02:03.0: version 3.0
[    1.972463] ahci 0000:02:03.0: AHCI 0001.0300 32 slots 30 ports 6 Gbps 0x3fffffff impl SATA mode
[    1.972469] ahci 0000:02:03.0: flags: 64bit ncq clo only 
[    1.979618] scsi host0: ahci
[    1.979689] ata1: SATA max UDMA/133 abar m4096@0xfd5ff000 port 0xfd5ff100 irq 56
[    2.284444] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.284486] ata1.00: ATA-6: VMware Virtual SATA Hard Drive, 00000001, max UDMA/100
[    2.284489] ata1.00: 102400 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.284491] ata1.00: SN:00000000000000000001
[    2.284531] ata1.00: configured for UDMA/100
[    2.284542] ata1.00: Find SSD disks. [VMware Virtual SATA Hard Drive]
[    2.284712] scsi 0:0:0:0: Direct-Access     VMware   Virtual SATA Hard Drive  0001 PQ: 0 ANSI: 5
[    2.284885] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[    2.284945] sd 0:0:0:0: [sda] Write Protect is off
[    2.284949] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.284974] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.284980] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
[    2.285637] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.285647] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.285658] i2c /dev entries driver
[    2.285670] md: linear personality registered for level -1
[    2.285675] md: raid0 personality registered for level 0
[    2.285680] md: raid1 personality registered for level 1
[    2.285691] md: raid10 personality registered for level 10
[    2.286259] md: raid6 personality registered for level 6
[    2.286262] md: raid5 personality registered for level 5
[    2.286264] md: raid4 personality registered for level 4
[    2.286338] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.286439] NET: Registered protocol family 17
[    2.286456] Key type dns_resolver registered
[    2.286831]  sda: sda1 sda2 sda3
[    2.286906] registered taskstats version 1
[    2.286912] Loading compiled-in untrusted X.509 certificates
[    2.286916] Loading compiled-in X.509 certificates
[    2.286928] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    2.287136] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.287451] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    2.287463] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    2.287474] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    2.287486] page_owner is disabled
[    2.287505] AppArmor: AppArmor sha1 policy hashing enabled
[    2.291364] hctosys: unable to open rtc device (rtc0)
[    2.292018] Freeing unused kernel memory: 864K (ffffffff81879000 - ffffffff81951000)
[    2.292022] Write protecting the kernel read-only data: 8192k
[    2.292111] Freeing unused kernel memory: 520K (ffff88000157e000 - ffff880001600000)
[    2.292348] Freeing unused kernel memory: 200K (ffff8800017ce000 - ffff880001800000)
[    2.345466] ACPI: bus type USB registered
[    2.345513] usbcore: registered new interface driver usbfs
[    2.345533] usbcore: registered new interface driver hub
[    2.345592] usbcore: registered new interface driver ethub
[    2.345636] usbcore: registered new device driver usb
[    2.355474] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.362471] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[    2.362479] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 1
[    2.564169] xhci_hcd 0000:0c:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
[    2.564672] hub 1-0:1.0: USB hub found
[    2.564685] hub 1-0:1.0: 1 port detected
[    2.564750] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[    2.564754] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 2
[    2.564799] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.565055] hub 2-0:1.0: USB hub found
[    2.565074] hub 2-0:1.0: 4 ports detected
[    2.565507] xhci_hcd 0000:1b:00.0: xHCI Host Controller
[    2.565518] xhci_hcd 0000:1b:00.0: new USB bus registered, assigned bus number 3
[    2.641538] tsc: Refined TSC clocksource calibration: 2399.992 MHz
[    2.641542] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22982fdf183, max_idle_ns: 440795240423 ns
[    2.767671] xhci_hcd 0000:1b:00.0: hcc params 0x0388f081 hci version 0x100 quirks 0x00000010
[    2.767696] xhci_hcd 0000:1b:00.0: cache line size of 64 is not supported
[    2.768687] hub 3-0:1.0: USB hub found
[    2.768719] hub 3-0:1.0: 4 ports detected
[    2.768841] xhci_hcd 0000:1b:00.0: xHCI Host Controller
[    2.768845] xhci_hcd 0000:1b:00.0: new USB bus registered, assigned bus number 4
[    2.768935] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.769285] hub 4-0:1.0: USB hub found
[    2.769314] hub 4-0:1.0: 4 ports detected
[    2.789576] usbcore: registered new interface driver usb-storage
[    2.825980] VMware PVSCSI driver - version 1.0.5.0-k
[    2.830538] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    2.835223] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    2.840191] Fusion MPT base driver 3.04.20
[    2.840194] Copyright (c) 1999-2008 LSI Corporation
[    2.848216] Fusion MPT SPI Host driver 3.04.20
[    2.853030] Fusion MPT misc device (ioctl) driver 3.04.20
[    2.853083] mptctl: Registered with Fusion MPT base driver
[    2.853085] mptctl: /dev/mptctl @ (major,minor=10,220)
[    2.862577] megasas: 06.808.16.00-rc1
[    2.867552] Fusion MPT SAS Host driver 3.04.20
[    2.873627] mpt3sas version 09.102.00.00 loaded
[    2.877175] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (9187108 kB)
[    2.888517] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.920010] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 4, max_msix_vectors: -1
[    2.920036] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 63
[    2.920039] mpt2sas_cm0: iomem(0x00000000fd4fc000), mapped(0xffffc90000248000), size(16384)
[    2.920041] mpt2sas_cm0: ioport(0x0000000000004000), size(256)
[    3.016544] mpt2sas_cm0: Allocated physical memory: size(7445 kB)
[    3.016548] mpt2sas_cm0: Current Controller Queue Depth(3307),Max Controller Queue Depth(3432)
[    3.016550] mpt2sas_cm0: Scatter Gather Elements per IO(128)
[    3.022588] usb 1-1: not running at top speed
[    3.061997] mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03), BiosVersion(07.27.00.00)
[    3.062000] mpt2sas_cm0: Protocol=(
[    3.062001] Initiator
[    3.062002] ,Target
[    3.062003] ), 
[    3.062005] Capabilities=(
[    3.062006] TLR
[    3.062007] ,EEDP
[    3.062008] ,Snapshot Buffer
[    3.062009] ,Diag Trace Buffer
[    3.062010] ,Task Set Full
[    3.062011] ,NCQ
[    3.062012] )
[    3.062080] scsi host1: Fusion MPT SAS Host
[    3.062784] mpt2sas_cm0: sending port enable !!
[    3.066101] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5000000080000000), phys(8)
[    3.069066] scsi 1:0:0:0: Direct-Access     Samsung  SSD 840 EVO 250GB        DB6Q PQ: 0 ANSI: 6
[    3.069077] scsi 1:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x50025388a001ff77)
[    3.069081] scsi 1:0:0:0: SATA: enclosure_logical_id(0x5000000080000000), slot(3)
[    3.069155] scsi 1:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    3.069706] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.072316] sd 1:0:0:0: [sdb] Write Protect is off
[    3.072322] sd 1:0:0:0: [sdb] Mode Sense: 7f 00 10 08
[    3.072998] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    3.077084]  sdb: sdb1 sdb2 sdb3
[    3.078293] scsi 1:0:1:0: Direct-Access     Seagate  BarraCuda 120 SSD ZA250C D013 PQ: 0 ANSI: 6
[    3.078305] scsi 1:0:1:0: SATA: handle(0x000d), sas_addr(0x4433221101000000), phy(1), device_name(0x5000c500bb16b401)
[    3.078308] scsi 1:0:1:0: SATA: enclosure_logical_id(0x5000000080000000), slot(2)
[    3.078374] scsi 1:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    3.078818] sd 1:0:1:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.079501] sd 1:0:1:0: [sdc] Write Protect is off
[    3.079505] sd 1:0:1:0: [sdc] Mode Sense: 7f 00 10 08
[    3.080046] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    3.081291] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.081580]  sdc: sdc1 sdc2 sdc3
[    3.082670] sd 1:0:1:0: [sdc] Attached SCSI disk
[    3.090767] scsi 1:0:2:0: Direct-Access     WDC      WD100EZAZ-11TDBA0        0A83 PQ: 0 ANSI: 6
[    3.090777] scsi 1:0:2:0: SATA: handle(0x000a), sas_addr(0x4433221102000000), phy(2), device_name(0x5000cca267f18cfa)
[    3.090780] scsi 1:0:2:0: SATA: enclosure_logical_id(0x5000000080000000), slot(1)
[    3.090846] scsi 1:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    3.091642] sd 1:0:2:0: [sdd] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
[    3.091647] sd 1:0:2:0: [sdd] 4096-byte physical blocks
[    3.092551] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    3.094894] sd 1:0:2:0: [sdd] Write Protect is off
[    3.094901] sd 1:0:2:0: [sdd] Mode Sense: 7f 00 10 08
[    3.095140] sd 1:0:2:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    3.098409] scsi 1:0:3:0: Direct-Access     WDC      WD100EZAZ-11TDBA0        0A83 PQ: 0 ANSI: 6
[    3.098420] scsi 1:0:3:0: SATA: handle(0x000b), sas_addr(0x4433221103000000), phy(3), device_name(0x5000cca267f18052)
[    3.098424] scsi 1:0:3:0: SATA: enclosure_logical_id(0x5000000080000000), slot(0)
[    3.098501] scsi 1:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    3.099279] sd 1:0:3:0: [sde] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
[    3.099284] sd 1:0:3:0: [sde] 4096-byte physical blocks
[    3.102593] sd 1:0:3:0: [sde] Write Protect is off
[    3.102598] sd 1:0:3:0: [sde] Mode Sense: 7f 00 10 08
[    3.102818] sd 1:0:3:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    3.104554] scsi 1:0:4:0: Direct-Access     WDC      WD100EZAZ-11TDBA0        0A83 PQ: 0 ANSI: 6
[    3.104564] scsi 1:0:4:0: SATA: handle(0x000c), sas_addr(0x4433221107000000), phy(7), device_name(0x5000cca267caebff)
[    3.104568] scsi 1:0:4:0: SATA: enclosure_logical_id(0x5000000080000000), slot(4)
[    3.104617] scsi 1:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    3.105281] sd 1:0:4:0: [sdf] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
[    3.105285] sd 1:0:4:0: [sdf] 4096-byte physical blocks
[    3.107550] mpt2sas_cm0: port enable: SUCCESS
[    3.107863] sd 1:0:4:0: [sdf] Write Protect is off
[    3.107868] sd 1:0:4:0: [sdf] Mode Sense: 7f 00 10 08
[    3.108116] sd 1:0:4:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    3.109992]  sdd: sdd1 sdd2 sdd5
[    3.112095]  sdf: sdf1 sdf2 sdf5
[    3.115165] sd 1:0:4:0: [sdf] Attached SCSI disk
[    3.115176] sd 1:0:2:0: [sdd] Attached SCSI disk
[    3.127139]  sde: sde1 sde2 sde5
[    3.132282] sd 1:0:3:0: [sde] Attached SCSI disk
[    3.197695] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    3.197721] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[    3.205845] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    3.210161] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    3.214120] Adaptec aacraid driver 1.2-1[41010]-ms
[    3.221927] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    3.226741] Got empty serial number. Generate serial number from product.
[    3.231371] RocketRAID 3xxx/4xxx Controller driver v1.10.0
[    3.236292] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[    3.247944] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    3.261591] apollolake_synobios: module license 'Synology Inc.' taints kernel.
[    3.261597] Disabling lock debugging due to kernel taint
[    3.261771] 2020-5-12 7:6:52 UTC
[    3.261775] synobios: load, major number 201
[    3.261777] Brand: Synology
[    3.261779] Model: DS-918+
[    3.261782] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[    3.261785] synobios cpu_arch proc entry initialized
[    3.261787] synobios crypto_hw proc entry initialized
[    3.261789] synobios syno_platform proc entry initialized
[    3.261796] synobios open /dev/ttyS1 success
[    3.265242] synobios: unload
[    3.272003] md: Autodetecting RAID arrays.
[    3.272930] md: invalid raid superblock magic on sdb3
[    3.273597] md: sdb3 does not have a valid v0.90 superblock, not importing!
[    3.275107] md: invalid raid superblock magic on sdc3
[    3.275602] md: sdc3 does not have a valid v0.90 superblock, not importing!
[    3.293619] md: invalid raid superblock magic on sdd5
[    3.293636] md: sdd5 does not have a valid v0.90 superblock, not importing!
[    3.301699] md: invalid raid superblock magic on sde5
[    3.302582] md: sde5 does not have a valid v0.90 superblock, not importing!
[    3.302759] md: invalid raid superblock magic on sdf5
[    3.303589] md: sdf5 does not have a valid v0.90 superblock, not importing!
[    3.303595] md: Scanned 15 and added 10 devices.
[    3.303596] md: autorun ...
[    3.303598] md: considering sdb1 ...
[    3.303599] md:  adding sdb1 ...
[    3.303603] md: sdb2 has different UUID to sdb1
[    3.303606] md:  adding sdc1 ...
[    3.303609] md: sdc2 has different UUID to sdb1
[    3.303612] md:  adding sdd1 ...
[    3.303615] md: sdd2 has different UUID to sdb1
[    3.303618] md:  adding sde1 ...
[    3.303621] md: sde2 has different UUID to sdb1
[    3.303624] md:  adding sdf1 ...
[    3.303626] md: sdf2 has different UUID to sdb1
[    3.303636] md: created md0
[    3.303637] md: bind<sdf1>
[    3.303654] md: bind<sde1>
[    3.303663] md: bind<sdd1>
[    3.303672] md: bind<sdc1>
[    3.303681] md: bind<sdb1>
[    3.303690] md: running: <sdb1><sdc1><sdd1><sde1><sdf1>
[    3.303948] md/raid1:md0: active with 2 out of 2 mirrors
[    3.318649] md0: detected capacity change from 0 to 2549940224
[    3.318673] md: considering sdb2 ...
[    3.318679] md:  adding sdb2 ...
[    3.318681] RAID1 conf printout:
[    3.318683]  --- wd:2 rd:2
[    3.318684] md:  adding sdc2 ...
[    3.318687]  disk 0, wo:0, o:1, dev:sdd1
[    3.318688] md:  adding sdd2 ...
[    3.318691]  disk 1, wo:0, o:1, dev:sde1
[    3.318692] md:  adding sde2 ...
[    3.318694] RAID1 conf printout:
[    3.318695]  --- wd:2 rd:2
[    3.318696] md:  adding sdf2 ...
[    3.318698]  disk 0, wo:0, o:1, dev:sdd1
[    3.318700]  disk 1, wo:0, o:1, dev:sde1
[    3.318701] RAID1 conf printout:
[    3.318703]  --- wd:2 rd:2
[    3.318705]  disk 0, wo:0, o:1, dev:sdd1
[    3.318707]  disk 1, wo:0, o:1, dev:sde1
[    3.320074] md: created md1
[    3.320079] md: bind<sdf2>
[    3.320096] md: bind<sde2>
[    3.320110] md: bind<sdd2>
[    3.320120] md: bind<sdc2>
[    3.320134] md: bind<sdb2>
[    3.320148] md: running: <sdb2><sdc2><sdd2><sde2><sdf2>
[    3.321609] md/raid1:md1: active with 5 out of 16 mirrors
[    3.325628] md1: detected capacity change from 0 to 2147418112
[    3.325642] md: ... autorun DONE.
[    3.331003] random: nonblocking pool is initialized
[    3.392645] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.526653] usb 1-1: not running at top speed
[    3.644656] clocksource: Switched to clocksource tsc
[    3.897712] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.909223] EXT4-fs (md0): barriers disabled
[    3.916755] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
[    4.032727] usb 1-1: not running at top speed
[    4.401840] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    4.535879] usb 1-1: not running at top speed
[    4.904934] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    5.038910] usb 1-1: not running at top speed
[    5.407965] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    5.541999] usb 1-1: not running at top speed
[    5.542558] Got empty serial number. Generate serial number from product.
[    5.543062] hub 1-1:1.0: USB hub found
[    5.543267] hub 1-1:1.0: 4 ports detected
[    5.665011] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[    5.676696] Got empty serial number. Generate serial number from product.
[    5.676706] drivers/usb/core/hub.c (2897) Same device found. Change serial to ffffffd6ffffffa3ffffffebffffffc0 
[    5.677549] hub 2-4:1.0: USB hub found
[    5.677828] hub 2-4:1.0: 4 ports detected
[    5.831973] usb 1-1.4: new high-speed USB device number 3 using xhci_hcd
[    5.927371] Got empty serial number. Generate serial number from product.
[    5.927387] drivers/usb/core/hub.c (2897) Same device found. Change serial to ffffffd6ffffffa3ffffffebffffffc0 
[    5.927391] drivers/usb/core/hub.c (2897) Same device found. Change serial to ffffffd6ffffffa3ffffffebffffffc1 
[    5.928282] hub 1-1.4:1.0: USB hub found
[    5.928567] hub 1-1.4:1.0: 4 ports detected
[    6.159847] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[    7.509365] EXT4-fs (md0): re-mounted. Opts: (null)
[   30.113441] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   30.113503] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   30.113746] sd 1:0:1:0: Attached scsi generic sg2 type 0
[   30.113841] sd 1:0:2:0: Attached scsi generic sg3 type 0
[   30.113893] sd 1:0:3:0: Attached scsi generic sg4 type 0
[   30.113946] sd 1:0:4:0: Attached scsi generic sg5 type 0
[   30.442644] md1: detected capacity change from 2147418112 to 0
[   30.442651] md: md1: set sdb2 to auto_remap [0]
[   30.442652] md: md1: set sdc2 to auto_remap [0]
[   30.442653] md: md1: set sdd2 to auto_remap [0]
[   30.442654] md: md1: set sde2 to auto_remap [0]
[   30.442655] md: md1: set sdf2 to auto_remap [0]
[   30.442655] md: md1 stopped.
[   30.442659] md: unbind<sdb2>
[   30.449595] md: export_rdev(sdb2)
[   30.449618] md: unbind<sdc2>
[   30.455577] md: export_rdev(sdc2)
[   30.455596] md: unbind<sdd2>
[   30.461588] md: export_rdev(sdd2)
[   30.461615] md: unbind<sde2>
[   30.467598] md: export_rdev(sde2)
[   30.467617] md: unbind<sdf2>
[   30.473600] md: export_rdev(sdf2)
[   31.904809] md: bind<sdb2>
[   31.904970] md: bind<sdc2>
[   31.905191] md: bind<sdd2>
[   31.905475] md: bind<sde2>
[   31.905758] md: bind<sdf2>
[   31.906566] md/raid1:md1: active with 5 out of 16 mirrors
[   31.926200] md1: detected capacity change from 0 to 2147418112
[   31.985206] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[   32.261519] zram: Added device: zram0
[   32.271872] zram0: detected capacity change from 0 to 5644484608
[   32.277747] Adding 5512188k swap on /dev/zram0.  Priority:1 extents:1 across:5512188k SS
[   35.185049] NET: Registered protocol family 10
[   35.210486] sit: IPv6 over IPv4 tunneling driver
[   35.536753] init: syno-auth-check main process (7199) killed by TERM signal
[   36.063242] SSE version of gcm_enc/dec engaged.
[   36.130974] fuse init (API version 7.23)
[   36.178967] e1000e: Intel(R) PRO/1000 Network Driver - 3.6.0-NAPI
[   36.178971] e1000e: Copyright(c) 1999 - 2019 Intel Corporation.
[   36.179807] e1000e 0000:0b:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   36.285316] e1000e 0000:0b:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:0c:29:be:24:28
[   36.285323] e1000e 0000:0b:00.0 eth0: Intel(R) PRO/1000 Network Connection
[   36.285375] e1000e 0000:0b:00.0 eth0: MAC: 3, PHY: 8, PBA No: 000000-000
[   36.286354] e1000e 0000:14:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   36.393146] e1000e 0000:14:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:0c:29:be:24:32
[   36.393150] e1000e 0000:14:00.0 eth1: Intel(R) PRO/1000 Network Connection
[   36.393218] e1000e 0000:14:00.0 eth1: MAC: 3, PHY: 8, PBA No: 000000-000
[   36.394320] e1000e 0000:1c:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   36.500355] e1000e 0000:1c:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:0c:29:be:24:3c
[   36.500358] e1000e 0000:1c:00.0 eth2: Intel(R) PRO/1000 Network Connection
[   36.500410] e1000e 0000:1c:00.0 eth2: MAC: 3, PHY: 8, PBA No: 000000-000
[   36.521508] Intel(R) Gigabit Ethernet Linux Driver - version 5.3.5.39
[   36.521511] Copyright(c) 2007 - 2019 Intel Corporation.
[   36.529553] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.6.3
[   36.529556] Copyright(c) 1999 - 2019 Intel Corporation.
[   36.534661] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.3.46-k
[   36.534664] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
[   36.540660] tn40xx: Tehuti Network Driver, 0.3.6.17.2
[   36.541616] tn40xx: Supported phys : MV88X3120 MV88X3310 MV88E2010 QT2025 TLK10232 AQR105 MUSTANG 
[   36.562875] Compat-mlnx-ofed backport release: f36c870
[   36.562878] Backport based on mlnx_ofed/mlnx-ofa_kernel-4.0.git f36c870
[   36.562879] compat.git: mlnx_ofed/mlnx-ofa_kernel-4.0.git
[   36.582999] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10)
[   36.623012] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   36.623017] ACPI: Power Button [PWRF]
[   36.749952] i915 0000:13:00.0: enabling device (0000 -> 0003)
[   36.752116] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   36.752119] Failed to add WC MTRR for [00000000d0000000-00000000dfffffff]; performance may suffer.
[   36.752363] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   36.752365] [drm] Driver supports precise vblank timestamp query.
[   36.752369] i915 0000:13:00.0: BAR 6: can't assign [??? 0x00000000 flags 0x20000000] (bogus alignment)
[   36.752370] [drm] Failed to find VBIOS tables (VBT)
[   36.752508] [drm:gen9_set_dc_state [i915]] *ERROR* DC state mismatch (0x0 -> 0x2)
[   36.754642] vgaarb: device changed decodes: PCI:0000:13:00.0,olddecodes=io+mem,decodes=none:owns=none
[   36.756770] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[   36.761592] [drm] Initialized i915 1.6.0 20171222 for 0000:13:00.0 on minor 0
[   36.792690] [drm] Cannot find any crtc or sizes
[   36.833130] i915 0000:13:00.0: fb0: inteldrmfb frame buffer device
[   36.871157] Btrfs loaded, crc32c=crc32c-intel
[   36.880409] exFAT: Version 1.2.9
[   36.944045] jme: JMicron JMC2XX ethernet driver version 1.0.8
[   36.950236] sky2: driver version 1.30
[   36.960180] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.63
[   36.966583] QLogic/NetXen Network Driver v4.0.82
[   36.970025] Solarflare NET driver v4.0
[   36.975452] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   36.975455] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   36.978546] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[   36.981575] VMware vmxnet3 virtual NIC driver - version 1.4.5.0-k-NAPI
[   37.002448] usbcore: registered new interface driver ax88179_178a
[   37.010720] usbcore: registered new interface driver asix
[   37.013774] Atheros(R) L2 Ethernet Driver - version 2.2.3
[   37.013776] Copyright (c) 2007 Atheros Corporation.
[   37.020479] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1
[   37.023631] usbcore: registered new interface driver cx82310_eth
[   37.040099] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   37.040101] e100: Copyright(c) 1999-2006 Intel Corporation
[   37.043449] enic: Cisco VIC Ethernet NIC Driver, ver 2.3.0.20
[   37.048643] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   37.061622] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   37.061665] usbcore: registered new interface driver pegasus
[   37.064861] usbcore: registered new interface driver plusb
[   37.068255] usbcore: registered new interface driver rtl8150
[   37.079511] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[   37.088000] usbcore: registered new interface driver r8152
[   37.096279] vxge: Copyright(c) 2002-2010 Exar Corp.
[   37.096281] vxge: Driver version: 2.5.3.22640-k
[   37.104236] usbcore: registered new interface driver aqc111
[   37.170243] 2020-5-12 7:7:20 UTC
[   37.170247] synobios: load, major number 201
[   37.170250] Brand: Synology
[   37.170252] Model: DS-918+
[   37.170254] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   37.170258] synobios cpu_arch proc entry initialized
[   37.170260] synobios crypto_hw proc entry initialized
[   37.170261] synobios syno_platform proc entry initialized
[   37.170271] synobios open /dev/ttyS1 success
[   37.255613] systemd-udevd[8283]: starting version 204
[   38.739377] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   38.741729] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   38.742710] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   39.028409] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   39.029936] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   39.031730] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   39.277636] ip_tables: (C) 2000-2006 Netfilter Core Team
[   39.307252] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   39.412656] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   40.545124] md: md4 stopped.
[   40.545890] md: bind<sdc3>
[   40.546008] md: bind<sdb3>
[   40.553045] md/raid1:md4: active with 2 out of 2 mirrors
[   40.556117] md4: detected capacity change from 0 to 245223849984
[   40.558915] md: md5 stopped.
[   40.577313] md: bind<sde5>
[   40.577548] md: bind<sdf5>
[   40.577752] md: bind<sdd5>
[   40.590624] md/raid:md5: device sdd5 operational as raid disk 0
[   40.590628] md/raid:md5: device sdf5 operational as raid disk 2
[   40.590630] md/raid:md5: device sde5 operational as raid disk 1
[   40.591082] md/raid:md5: allocated 3318kB
[   40.617577] md/raid:md5: raid level 5 active with 3 out of 3 devices, algorithm 2
[   40.617581] RAID conf printout:
[   40.617583]  --- level:5 rd:3 wd:3
[   40.617585]  disk 0, o:1, dev:sdd5
[   40.617587]  disk 1, o:1, dev:sde5
[   40.617588]  disk 2, o:1, dev:sdf5
[   40.630554] md5: detected capacity change from 0 to 19991754702848
[   41.201675] init: dhcp-client (eth1) main process (11135) killed by TERM signal
[   47.661616] BTRFS: device label 2019.10.02-08:19:05 v24922 devid 1 transid 1334419 /dev/md4
[   47.661997] BTRFS info (device md4): enabling auto syno reclaim space
[   47.662002] BTRFS info (device md4): using free space tree
[   47.662004] BTRFS info (device md4): has skinny extents
[   51.502122] BTRFS: device label 2019.12.21-16:49:37 v24922 devid 1 transid 89042 /dev/vg2/volume_3
[   51.502851] BTRFS info (device dm-1): enabling auto syno reclaim space
[   51.502857] BTRFS info (device dm-1): using free space tree
[   51.502858] BTRFS info (device dm-1): has skinny extents
[   55.528271] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   55.528274] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[   55.542017] ehci-pci: EHCI PCI platform driver
[   55.603410] uhci_hcd: USB Universal Host Controller Interface driver
[   55.622093] usbcore: registered new interface driver usblp
[   55.657441] usbcore: registered new interface driver usbhid
[   55.657444] usbhid: USB HID core driver
[   55.665597] input: VMware VMware Virtual USB Mouse as /devices/pci0000:00/0000:00:18.0/0000:1b:00.0/usb3/3-1/3-1:1.0/0003:0E0F:0003.0001/input/input1
[   55.665681] hid-generic 0003:0E0F:0003.0001: input: USB HID v1.10 Mouse [VMware VMware Virtual USB Mouse] on usb-0000:1b:00.0-1/input0
[   57.461813] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(000c29be2428).
[   57.503559] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[   57.518582] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   57.518680] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   57.580919] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled.
[   57.580924] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled.
[   57.580934] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[   57.580955] iSCSI:target_core_ep.c:786:ep_attach_hba RODSP plugin for epio is enabled.
[   57.580956] iSCSI:target_core_ep.c:793:ep_attach_hba ODX Token Manager is enabled.
[  227.602886] loop: module loaded
[  228.505205] ata1.00: configured for UDMA/100
[  228.505211] ata1: EH complete
[  228.958838] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use)
[  233.502654] init: synoscheduler-vmtouch main process (6131) killed by TERM signal
[  234.044175] init: synoscheduler-vmtouch main process (20662) killed by TERM signal
[  234.642501] init: synoscheduler-vmtouch main process (21147) killed by TERM signal
[  235.074373] init: synoscheduler-vmtouch main process (21498) killed by TERM signal
[  235.271465] init: pkg-WebStation-userdir main process (21013) terminated with status 1
[  235.413373] init: synoscheduler-vmtouch main process (21775) killed by TERM signal
[  235.629505] init: synoscheduler-vmtouch main process (21896) killed by TERM signal
[  235.842561] init: synoscheduler-vmtouch main process (22018) killed by TERM signal
[  236.032866] init: synoscheduler-vmtouch main process (22099) killed by TERM signal
[  236.994123] aufs 4.4-20160328
[  237.107834] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[  237.161451] Bridge firewalling registered
[  237.282572] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[  237.282742] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[  237.282787] IPVS: Creating netns size=2096 id=0
[  237.282801] IPVS: ipvs loaded.
[  237.310691] IPVS: [rr] scheduler registered.
[  240.252369] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[  241.584361] device docker994462d entered promiscuous mode
[  241.584429] IPv6: ADDRCONF(NETDEV_UP): docker994462d: link is not ready
[  241.584433] docker0: port 1(docker994462d) entered forwarding state
[  241.584441] docker0: port 1(docker994462d) entered forwarding state
[  241.585018] docker0: port 1(docker994462d) entered disabled state
[  241.734019] device dockerdff4835 entered promiscuous mode
[  241.734075] IPv6: ADDRCONF(NETDEV_UP): dockerdff4835: link is not ready
[  241.734079] docker0: port 2(dockerdff4835) entered forwarding state
[  241.734090] docker0: port 2(dockerdff4835) entered forwarding state
[  241.734742] docker0: port 2(dockerdff4835) entered disabled state
[  241.821352] device dockerab9e350 entered promiscuous mode
[  241.821419] IPv6: ADDRCONF(NETDEV_UP): dockerab9e350: link is not ready
[  241.821423] docker0: port 3(dockerab9e350) entered forwarding state
[  241.821433] docker0: port 3(dockerab9e350) entered forwarding state
[  241.822144] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[  241.822270] docker0: port 3(dockerab9e350) entered disabled state
[  241.942631] device docker1e8c9c2 entered promiscuous mode
[  241.942683] IPv6: ADDRCONF(NETDEV_UP): docker1e8c9c2: link is not ready
[  241.942687] docker0: port 4(docker1e8c9c2) entered forwarding state
[  241.942696] docker0: port 4(docker1e8c9c2) entered forwarding state
[  242.171843] device docker954c6c7 entered promiscuous mode
[  242.171907] IPv6: ADDRCONF(NETDEV_UP): docker954c6c7: link is not ready
[  242.171910] docker0: port 5(docker954c6c7) entered forwarding state
[  242.171947] docker0: port 5(docker954c6c7) entered forwarding state
[  242.341595] device dockera2bc449 entered promiscuous mode
[  242.341653] IPv6: ADDRCONF(NETDEV_UP): dockera2bc449: link is not ready
[  242.341657] docker0: port 6(dockera2bc449) entered forwarding state
[  242.341665] docker0: port 6(dockera2bc449) entered forwarding state
[  242.468264] device docker620e39a entered promiscuous mode
[  242.468334] IPv6: ADDRCONF(NETDEV_UP): docker620e39a: link is not ready
[  242.468337] docker0: port 7(docker620e39a) entered forwarding state
[  242.468346] docker0: port 7(docker620e39a) entered forwarding state
[  242.470472] IPVS: Creating netns size=2096 id=1
[  242.587058] docker0: port 4(docker1e8c9c2) entered disabled state
[  242.587210] docker0: port 5(docker954c6c7) entered disabled state
[  242.587268] docker0: port 6(dockera2bc449) entered disabled state
[  242.587444] docker0: port 7(docker620e39a) entered disabled state
[  242.718239] eth0: renamed from dockere11001b
[  242.724520] IPv6: ADDRCONF(NETDEV_CHANGE): docker994462d: link becomes ready
[  242.724559] docker0: port 1(docker994462d) entered forwarding state
[  242.724572] docker0: port 1(docker994462d) entered forwarding state
[  242.796180] init: smbd main process (18797) killed by TERM signal
[  242.808571] IPVS: Creating netns size=2096 id=2
[  243.010971] IPVS: Creating netns size=2096 id=3
[  243.015697] IPVS: Creating netns size=2096 id=4
[  243.105192] eth0: renamed from dockered4ccf6
[  243.113563] IPv6: ADDRCONF(NETDEV_CHANGE): dockerdff4835: link becomes ready
[  243.113615] docker0: port 2(dockerdff4835) entered forwarding state
[  243.113641] docker0: port 2(dockerdff4835) entered forwarding state
[  243.250293] eth0: renamed from docker01f81ba
[  243.258614] IPv6: ADDRCONF(NETDEV_CHANGE): docker1e8c9c2: link becomes ready
[  243.258666] docker0: port 4(docker1e8c9c2) entered forwarding state
[  243.258687] docker0: port 4(docker1e8c9c2) entered forwarding state
[  243.302425] eth0: renamed from docker24f0966
[  243.307535] IPv6: ADDRCONF(NETDEV_CHANGE): dockerab9e350: link becomes ready
[  243.307585] docker0: port 3(dockerab9e350) entered forwarding state
[  243.307610] docker0: port 3(dockerab9e350) entered forwarding state
[  243.328570] IPVS: Creating netns size=2096 id=5
[  243.534233] IPVS: Creating netns size=2096 id=6
[  243.597329] eth0: renamed from docker56ea5bd
[  243.607776] IPv6: ADDRCONF(NETDEV_CHANGE): dockera2bc449: link becomes ready
[  243.607824] docker0: port 6(dockera2bc449) entered forwarding state
[  243.607848] docker0: port 6(dockera2bc449) entered forwarding state
[  243.743535] eth0: renamed from docker7cd9f7b
[  243.753919] IPv6: ADDRCONF(NETDEV_CHANGE): docker620e39a: link becomes ready
[  243.753972] docker0: port 7(docker620e39a) entered forwarding state
[  243.753994] docker0: port 7(docker620e39a) entered forwarding state
[  243.984444] IPVS: Creating netns size=2096 id=7
[  244.189588] eth0: renamed from dockere8dabc2
[  244.196647] IPv6: ADDRCONF(NETDEV_CHANGE): docker954c6c7: link becomes ready
[  244.196685] docker0: port 5(docker954c6c7) entered forwarding state
[  244.196701] docker0: port 5(docker954c6c7) entered forwarding state
[  245.313554] device docker757bdc2 entered promiscuous mode
[  245.313642] IPv6: ADDRCONF(NETDEV_UP): docker757bdc2: link is not ready
[  245.313646] docker0: port 8(docker757bdc2) entered forwarding state
[  245.313662] docker0: port 8(docker757bdc2) entered forwarding state
[  245.314409] docker0: port 8(docker757bdc2) entered disabled state
[  245.849168] IPVS: Creating netns size=2096 id=8
[  246.075767] eth0: renamed from dockerec14c55
[  246.083723] IPv6: ADDRCONF(NETDEV_CHANGE): docker757bdc2: link becomes ready
[  246.083772] docker0: port 8(docker757bdc2) entered forwarding state
[  246.083796] docker0: port 8(docker757bdc2) entered forwarding state
[  249.355586] device dockeracf3438 entered promiscuous mode
[  249.355665] IPv6: ADDRCONF(NETDEV_UP): dockeracf3438: link is not ready
[  249.355668] docker0: port 9(dockeracf3438) entered forwarding state
[  249.355683] docker0: port 9(dockeracf3438) entered forwarding state
[  249.357648] docker0: port 9(dockeracf3438) entered disabled state
[  249.869779] IPVS: Creating netns size=2096 id=9
[  250.125498] eth0: renamed from docker95e62b2
[  250.135596] IPv6: ADDRCONF(NETDEV_CHANGE): dockeracf3438: link becomes ready
[  250.135648] docker0: port 9(dockeracf3438) entered forwarding state
[  250.135673] docker0: port 9(dockeracf3438) entered forwarding state
[  257.739097] docker0: port 1(docker994462d) entered forwarding state
[  258.123157] docker0: port 2(dockerdff4835) entered forwarding state
[  258.315186] docker0: port 4(docker1e8c9c2) entered forwarding state
[  258.315221] docker0: port 3(dockerab9e350) entered forwarding state
[  258.635236] docker0: port 6(dockera2bc449) entered forwarding state
[  258.763248] docker0: port 7(docker620e39a) entered forwarding state
[  259.211316] docker0: port 5(docker954c6c7) entered forwarding state
[  261.131595] docker0: port 8(docker757bdc2) entered forwarding state
[  265.164223] docker0: port 9(dockeracf3438) entered forwarding state

 

 

Edited by Leroy
Link to post
Share on other sites
17 часов назад, IG-88 сказал:

maybe you should consider downgrading and wait for a general release of 6.2.3?

 

I would better stay with this version. But thank you for your advice. 😉

By the way, the problem with webdav is in my windows computer, not in the DSM. WebDAV Server works well with the third party client

 

Link to post
Share on other sites

new version of 6.2.3-25426 released for a ton of models old and new. I installed it on my real 1815+ over the old 6.2.3 no issue, so I rebuilt my xpenology system DSM from scratch with it (didn't touch my boot USB) seems to have lost hw decode on my i3-8350k, similar to the i3-9100 others see. I am grateful to see that my LSI is still working (including SMART test) and my intel 10gigE is still working. I will have to try adding in the .11 extra /extra+ pack to my USB

 

Link to post
Share on other sites
13 hours ago, mervincm said:

so I rebuilt my xpenology system DSM from scratch with it (didn't touch my boot USB) seems to have lost hw decode on my i3-8350k, similar to the i3-9100 others see.

 

i solved this last weekend, nothing wrong with the drivers

https://xpenology.com/forum/topic/28321-driver-extension-jun-104b-for-dsm623-for-918/?do=findComment&comment=144918

 

Link to post
Share on other sites

I created a new boot USB w grub mods (like always) and the new 4 files on the second partition (extra.lzma (11), extra2.lzma (11) zimage (from 6.2.3.pat) and rd.gz (from 6.2.3.pat) and now my hw decode in plex works as expected and hoped. Thanks IG-88!! didn't break my 10GiGE nor my SATA/SAS... all looks great

 

 

Link to post
Share on other sites

I waited a bit and after 6.2.3 25426-0 PAT was available (today) I started the upgrade.

HP Gen 10 with 10gbit NIC and standalone NVME drive, DVD, and USB sound.

Upgrade from 6.2.2 extra918plus_v0.7_test -> 6.2.3 extra918plus_v0.11 was very easy:

  1. upgrade manually in UI (reboot)
  2. copy extras to USB drive in Windows and boot
  3. patch_LAN; activation patch (newest but not yet with this version, just add the ""6.2.3 25426-0"" string as last); libNVMEpatch (newest) patch and reboot

Super quick, no rufus / osfmount / imager,  lovely.

NVME standalone drive - didn't remove it before upgrade despite recommendation (but i don't use it as a cache), and didn't need to set up "md" logical drive after upgrade. Just patch. Same with 10gbit Aquantia NIC. On boot, server speaks "System started", pushbullet "NAS" custom "device" sends notification but it deleted the custom notification as a way of making sure i'm aware of restart via all possible ways. It also deleted the /root folder so will spend a lot of time to reconstruct my hacks.

 

Link to post
Share on other sites
15 hours ago, nadiva said:

It also deleted the /root folder so will spend a lot of time to reconstruct my hacks.

bigger updates with ~250mb *.pat files more or less exchange the whole /dev/md0 content (the content of the hda1 file in the pat file is the new content that will end on /dev/md0)

 

Link to post
Share on other sites
1 hour ago, IG-88 said:

bigger updates with ~250mb *.pat files more or less exchange the whole /dev/md0 content (the content of the hda1 file in the pat file is the new content that will end on /dev/md0)

 

Good to know.  I am now rsyncing these folders now (what a cheap small backup). Maybe mirroring boot drive would be helpful too.

I was scared to do "migration" instead of semibricking method because you say "In case of a "migration" the dsm installer will detect your former dsm installation and offer you to upgrade (migrate) the installation, usually you will loose plugins, but keep user/shares and network settings". I don't know what are "plugins" in DSM world but sounds scary. I hope you don't mean packages.

This version 6.2.3 didn't solve any problem so far - CloudStation/Drive chaos, Moments/Photos chaos, replicating homes still crashing although explicitely "fixed" recently.. Can't wair for DSM7!

Link to post
Share on other sites
1 hour ago, nadiva said:

upgrade (migrate) the installation, usually you will loose plugins, but keep user/shares and network settings". I don't know what are "plugins" in DSM world but sounds scary. I hope you don't mean packages.

i use the term  plugins sometimes instead of packages, the thing about loosing plugins is when updating from 6.x/6.0/6.1 to 6.2.x or doing cross migrations like 3615 to 918+

doing a "normal" 6.2.x to 6.2.3 should keep most packages working - there a some (pretty sure outside the coding guideline of synology) that write stuff to the system partition and dont handle updates, example is the powerbutton package, even when still present after update 6.2.2. to 6.2.3 you will have to uninstall ans install it to get the extensions and added driver back into the system

imho there is no difference when doing a semi brick or a migration, the migration scenario is meant to be safer as you keep your old boot device, dont change anything to the system and start with a fresh usb, that way you will only be able to update/migrate when your new usb is workin properly and the update should work nicely when having a working usb

if you dont get the new usb to work properly you can just put in your old and start your system and have a still working nas

 

with the semi brick you already have installed the update to the system partition and as long as you dont get the new usb loader working you cant access your data that easily (usually a rescue linux or open media vault booted from a added media will get you access to you files if you really need them)

Link to post
Share on other sites
45 minutes ago, Pepper1 said:

After upgrading extras to v.011 HDD hibernation does not work any more.

Any chance this can be looked at in a next release please?

i'm pretty sure you know clearly what dsm version and extra you had before (when is last worked) and what hardware you use - but you need to tell other people if you talking about a problem, also a log would be good to see whats going on

Link to post
Share on other sites
3 hours ago, richv31 said:

I also have HDD hibernation problems since upgrading to 6.2.3, loader 1.03b (3615). 6.2.2 with the extra.lzma worked great.

ahh, good, 1st thing you are using jun's drivers now (i'm not to blame;-)), also you are using synology's new kernel of 6.2.3 of witch we dont have the config (no 6.2.3 toolchains)

 

for 1.04b/918+ i used the same kernel config as for 6.2.2 but removed the change about CONFIG_PCIEASPM

 

the fact that it happen on 918+ and 3615 might point to  the kernel (source, that we dont have, the 3/2020 release is for 6.2.2) and we dont have the kernel config synology used to build the kernel for 6.2.3

 

16 hours ago, Pepper1 said:

Please see below

 

Hardware:

HP ML10 Gen 9

Xeon E3-1225 v5

...

dmseg.txt 55.87 kB · 4 downloads

 

that's just the boot process, i mend to get the log for a attempt to go into hibernation to took a error message that prevents the process to work

the boot log at least say's - or is it about he hibernation option grayed out under hardware and power / hdd hibernation? on my new hardware i can't enable wol waht is needed for hibernation


 

...
[    0.259175] ACPI: (supports S0 S4 S5)
...

S4 is hibernation aka suspend to disk is possible when it comes to acpi

 

 

 

Link to post
Share on other sites

Sorry for offtopic... About DSM6.2.3 with 1.03b (original jun's) and ds3615/ds3617 (i tryed both). "HDD Hibernation" stop working. I think that the reason is in some problems with drivers for scemd.

Spoiler

2020-05-19T13:40:46+03:00 XPEnologyX scemd: polling_sys_thermal.c:35 ioctl device failed
2020-05-19T13:40:46+03:00 XPEnologyX scemd: polling_sys_voltage.c:35 ioctl device failed
2020-05-19T13:40:46+03:00 XPEnologyX scemd: polling_fan_speed_rpm.c:35 ioctl device failed
2020-05-19T13:41:46+03:00 XPEnologyX scemd: polling_sys_thermal.c:35 ioctl device failed
2020-05-19T13:41:46+03:00 XPEnologyX scemd: polling_sys_voltage.c:35 ioctl device failed
2020-05-19T13:41:46+03:00 XPEnologyX scemd: polling_fan_speed_rpm.c:35 ioctl device failed
2020-05-19T13:42:46+03:00 XPEnologyX scemd: polling_sys_thermal.c:35 ioctl device failed
2020-05-19T13:42:46+03:00 XPEnologyX scemd: polling_sys_voltage.c:35 ioctl device failed
2020-05-19T13:42:46+03:00 XPEnologyX scemd: polling_fan_speed_rpm.c:35 ioctl device failed

 

And so on - error messages every minute prevent drives from sleeping. So we still need special extensions for ds3615/ds3617 with DSM6.2.3...

Link to post
Share on other sites

Yes My Azrock J4105 with DSM6.2.3 with 1.04b/918+ from clean install (clean usb and clean hdd). 

Hardware transcoding Work with default Videostation

Plex hardware transcoding only with decode not encode with hardware.  see Plex nas Compatibility for transcoding

 

Just change on 2nd partition 4 files: 2 from .pat  and 2 extra file from V0.10

Thanks a lot IG-88

Link to post
Share on other sites
On 5/18/2020 at 6:21 AM, Pepper1 said:

Hardware:

HP ML10 Gen 9

Xeon E3-1225 v5

 

DSM 6.2.3-25426    extras v0.11

 

Before upgrade:

DSM 6.2.2-24922  extras v0.8

 

i've now set up my own nas for hibernation

i did need to extend the synoinfo.conf for my 3rd nic (defaul 918+ is max 2, 3615/17 has max.8)  that is handling the normal network trafic, to activate WOL and after that i could enable hibernation

set it so minimum (10 min) and after rebooting and a normal shutdwon i tested WOL, it dis wake up and after this a let the box without activity and it was going to hibernation after a while, did wake it up with WOL again and checked the log - no problem, seems to work (with the 0.11 extra/extra2) and so my conclusion is that its not a general problem

(never used this for years, i use the acpi power button for start and shutdown)

 

some messages from log center in gui

2020-05-20 00:19:27 Internal disks woke up from hibernation. 
2020-05-19 23:39:26 System started to boot up. 
2020-05-19 23:34:35 System started to shutdown due to auto poweroff time up 
2020-05-19 23:34:35 Server started counting down to shutdown. 
2020-05-19 22:55:09 Internal disks woke up from hibernation. 

 

 

Spoiler

2020-05-19T22:55:09+02:00 scemd: event_disk_hibernation_handler.c:62 DS wakes up from disk deep sleep
2020-05-19T22:55:09+02:00 scemd: event_disk_hibernation_handler.c:44 The internal disks wake up, hibernate from [
May 19 22:46:04]
2020-05-19T22:55:10+02:00 scemd: led.c:270 Enable power & phy LED
2020-05-19T23:34:35+02:00 scemd: event_shutdown.c:56 Shutdown the system.
2020-05-19T23:36:03+02:00 scemd: manage_services.c:464 hw polling thread exit
2020-05-19T23:36:03+02:00 scemd: manage_services.c:464 scemd connector thread exit
2020-05-19T23:36:05+02:00 scemd: manage_services.c:464 disk led ctrl thread exit
2020-05-19T23:36:06+02:00 scemd: manage_services.c:464 led ctrl thread exit
2020-05-19T23:36:06+02:00 scemd: event_handler.c:318 event handler claimed
2020-05-19T23:36:06+02:00 scemd: scemd.c:327 ************************SCEMD End**************************
2020-05-19T23:43:11+02:00 scemd: scemd.c:208 ************************SCEMD start************************
2020-05-19T23:43:11+02:00 scemd: module_register.c:35 [WARNING] Too many internal disk, but without SysAdjust
2020-05-19T23:43:11+02:00 scemd: services_register.c:67 [WARNING] Too many internal disk, but without SysAdjust
2020-05-19T23:43:11+02:00 scemd: event_handler.c:292 event handler thread 139642682959616 created
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:17 +---- Model HW info ---
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:18 | fan_type=9
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:19 | led_type=1
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:20 | thermal_type=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:21 | diskled_ctrl_type=1
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:22 | auto_poweron_type=1
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:23 | dual_power_type=1
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:24 | usbcopy_type=0
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:25 | fan_number=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:26 | eunit_pwron_type=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:27 | pis_type=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:28 | rtc_type=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:29 | lcm_type=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:30 | wifi_wps_type=254
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:31 | cpu_freq_adjust=1
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:32 | has_cardreader=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:33 | hibernate_led=4
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:34 +----------------------
2020-05-19T23:43:11+02:00 scemd: show_memory_info.c:24 MemTotal:       16349876 kB
2020-05-19T23:43:11+02:00 scemd: system_status.c:274 Hibernation timer:10 min(s)
2020-05-19T23:43:11+02:00 scemd: system_status.c:278 Deep sleep timer:1 min(s)
2020-05-19T23:43:11+02:00 scemd: system_status.c:282 Eunit deep sleep timer:0 min(s)
2020-05-19T23:43:11+02:00 scemd: disk_xml.c:349 Invalid xml node name SN_.
2020-05-19T23:43:12+02:00 scemd: system_status.c:305 Auto poweroff timer:10 min(s)
2020-05-19T23:43:12+02:00 scemd: fan_config_get.c:47 Type: INTERNAL Fan Mode: LOW
2020-05-19T23:43:12+02:00 scemd: manage_services.c:501 hw polling thread 139642666174208 created
2020-05-19T23:43:12+02:00 scemd: manage_services.c:501 disk led ctrl thread 139642657781504 created
2020-05-19T23:43:12+02:00 scemd: manage_services.c:501 scemd connector thread 139642649388800 created
2020-05-19T23:43:12+02:00 scemd: scemd_connector.c:150 scemd connector thread start.
2020-05-19T23:43:12+02:00 scemd: manage_services.c:501 led ctrl thread 139642640996096 created

 

Edited by IG-88
Link to post
Share on other sites

Gigabyte Z390 Gaming X

On 5/5/2020 at 10:32 AM, deadsquirrel said:

I intend to insmod the option and then modify the cpu governers to switch to them and test their effectiveness in boosting on demand cpu frequency, then idling back down to low voltage low frequency at low demand. I'll test on both Pentium anniversary and Intel i3-9100 cpu baremetal. I see you have added it into 0.11 - thankyou - I'll test in the next couple of days and report.  Cheers, DeadS

Howdy, reporting back.

 

Implemented new build 1.04b ds918+

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: yes IG-88 extra.lzma/extra2.lzma for loader 1.04b ds918+ DSM 6.2.3 v0.11

- Installation type: BAREMETAL - Gigabyte Z390 Gaming X - CPU: Intel i3-9100  - NIC: Intel I219-V

- Additional comments: Video hardware transcoding success - Plex, and Videostation with Updated Videostation workaround. (Updated Videostation workaround IG-88 post)

/dev/dri - new driver has /dev/dri/Card0 - 0.10 had /dev/dri/0 interface - same hardware.

 

CPU Frequency governor insmod ./cpufreq_ondemand.ko - FAILS with

insmod ./cpufreq_ondemand.ko
insmod: ERROR: could not insert module ./cpufreq_ondemand.ko: Unknown symbol in module

 

/var/log/messages output.

2020-05-20T09:16:37+10:00 XXXXX kernel: [687147.086168] cpufreq_ondemand: Unknown symbol gov_queue_work (err 0)
2020-05-20T09:16:37+10:00 XXXXX kernel: [687147.086187] cpufreq_ondemand: Unknown symbol cpufreq_governor_dbs (err 0)
2020-05-20T09:16:37+10:00 XXXXX kernel: [687147.086204] cpufreq_ondemand: Unknown symbol dbs_check_cpu (err 0)

 

Ironwolf Health Management is also running ok in 0.11 (it did not in 0.10)

image.png.aa76ab9b32ade2cceac67b5d1a98ad13.png

 

Thanks for your efforts.

DeadS

  • Like 1
Link to post
Share on other sites

Clean USB and HDD install. 6.2.3-25426 918+. 104b, v11 extra and extra2, plus 2 files from pat 6.2.3-25426. hw transcoding was working correctly in plex. I swapped the cpu from 8350K to 9600K and now plex will no longer hw transcode. even though this was a clean build I tried the rm -rf /usr/lib/modules/update/ and reboot, but it didn't make any difference. I though maybe I needed the very latest i915 driver inside the latest video station (not sure if it would matter to plex but i thought to try) downloaded it from the link in this thread, modified it to apollolake and installed it, ignoring the package is corrupt message. it installed ok, but no improvement to plex ... still no hw transcode in plex ....

I do not have a /dev/dri folder, but I don't think plex needs that ...

 

 

Link to post
Share on other sites
4 hours ago, IG-88 said:

 

i've now set up my own nas for hibernation

i did need to extend the synoinfo.conf for my 3rd nic (defaul 918+ is max 2, 3615/17 has max.8)  that is handling the normal network trafic, to activate WOL and after that i could enable hibernation

set it so minimum (10 min) and after rebooting and a normal shutdwon i tested WOL, it dis wake up and after this a let the box without activity and it was going to hibernation after a while, did wake it up with WOL again and checked the log - no problem, seems to work (with the 0.11 extra/extra2) and so my conclusion is that its not a general problem

(never used this for years, i use the acpi power button for start and shutdown)

 

some messages from log center in gui


2020-05-20 00:19:27 Internal disks woke up from hibernation. 
2020-05-19 23:39:26 System started to boot up. 
2020-05-19 23:34:35 System started to shutdown due to auto poweroff time up 
2020-05-19 23:34:35 Server started counting down to shutdown. 
2020-05-19 22:55:09 Internal disks woke up from hibernation. 

 

 

  scemd.log (Reveal hidden contents)

2020-05-19T22:55:09+02:00 scemd: event_disk_hibernation_handler.c:62 DS wakes up from disk deep sleep
2020-05-19T22:55:09+02:00 scemd: event_disk_hibernation_handler.c:44 The internal disks wake up, hibernate from [
May 19 22:46:04]
2020-05-19T22:55:10+02:00 scemd: led.c:270 Enable power & phy LED
2020-05-19T23:34:35+02:00 scemd: event_shutdown.c:56 Shutdown the system.
2020-05-19T23:36:03+02:00 scemd: manage_services.c:464 hw polling thread exit
2020-05-19T23:36:03+02:00 scemd: manage_services.c:464 scemd connector thread exit
2020-05-19T23:36:05+02:00 scemd: manage_services.c:464 disk led ctrl thread exit
2020-05-19T23:36:06+02:00 scemd: manage_services.c:464 led ctrl thread exit
2020-05-19T23:36:06+02:00 scemd: event_handler.c:318 event handler claimed
2020-05-19T23:36:06+02:00 scemd: scemd.c:327 ************************SCEMD End**************************
2020-05-19T23:43:11+02:00 scemd: scemd.c:208 ************************SCEMD start************************
2020-05-19T23:43:11+02:00 scemd: module_register.c:35 [WARNING] Too many internal disk, but without SysAdjust
2020-05-19T23:43:11+02:00 scemd: services_register.c:67 [WARNING] Too many internal disk, but without SysAdjust
2020-05-19T23:43:11+02:00 scemd: event_handler.c:292 event handler thread 139642682959616 created
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:17 +---- Model HW info ---
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:18 | fan_type=9
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:19 | led_type=1
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:20 | thermal_type=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:21 | diskled_ctrl_type=1
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:22 | auto_poweron_type=1
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:23 | dual_power_type=1
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:24 | usbcopy_type=0
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:25 | fan_number=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:26 | eunit_pwron_type=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:27 | pis_type=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:28 | rtc_type=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:29 | lcm_type=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:30 | wifi_wps_type=254
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:31 | cpu_freq_adjust=1
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:32 | has_cardreader=2
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:33 | hibernate_led=4
2020-05-19T23:43:11+02:00 scemd: show_module_type.c:34 +----------------------
2020-05-19T23:43:11+02:00 scemd: show_memory_info.c:24 MemTotal:       16349876 kB
2020-05-19T23:43:11+02:00 scemd: system_status.c:274 Hibernation timer:10 min(s)
2020-05-19T23:43:11+02:00 scemd: system_status.c:278 Deep sleep timer:1 min(s)
2020-05-19T23:43:11+02:00 scemd: system_status.c:282 Eunit deep sleep timer:0 min(s)
2020-05-19T23:43:11+02:00 scemd: disk_xml.c:349 Invalid xml node name SN_.
2020-05-19T23:43:12+02:00 scemd: system_status.c:305 Auto poweroff timer:10 min(s)
2020-05-19T23:43:12+02:00 scemd: fan_config_get.c:47 Type: INTERNAL Fan Mode: LOW
2020-05-19T23:43:12+02:00 scemd: manage_services.c:501 hw polling thread 139642666174208 created
2020-05-19T23:43:12+02:00 scemd: manage_services.c:501 disk led ctrl thread 139642657781504 created
2020-05-19T23:43:12+02:00 scemd: manage_services.c:501 scemd connector thread 139642649388800 created
2020-05-19T23:43:12+02:00 scemd: scemd_connector.c:150 scemd connector thread start.
2020-05-19T23:43:12+02:00 scemd: manage_services.c:501 led ctrl thread 139642640996096 created

 

Do you have an LSI controller (9211-8i) or just the chipset SATA ports? My 6.2.3 install (3615) has one of those running with whatever driver was on Jun's 1.03b extra.lzma. Do you have a recompiled version for LSI for 6.2.3? 

Link to post
Share on other sites

"Clean USB and HDD install. 6.2.3-25426 918+. 104b, v11 extra and extra2, plus 2 files from pat 6.2.3-25426. hw transcoding was working correctly in plex. I swapped the cpu from 8350K to 9600K and now plex will no longer hw transcode." 

 

 

strange

 

root@DS2:~# dmesg | grep drm
root@DS2:~# dmesg | grep i915
root@DS2:~# cat /var/log/dmesg | grep i915
root@DS2:~# cat /var/log/dmesg | grep drm
root@DS2:~# cat /var/log/dmesg | grep DRM
 

no DRM or i915 messages???

 

Edited by mervincm
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.