takodz Posted July 28, 2014 Share #526 Posted July 28, 2014 can I exchange the usb with another usb with a fresh 5,0,3,1 and try ?or can I install a fresh install of the 5.0.3.1 and a fresh install of pat file? I've done a few re-installs of the VM as using ESXi and not lost any data yet, appears to recognise the fact that the volumes are already synology disks, but YMMV. did an fresh install and the files were still there but still cant expand the volume with the last disk but it is initialized I am going crazy. and I have no where to backup my data and start over with 5 drives in a new volume please help found this guide but I don't want to lose the data. and Linux is not my strong suit. butt do you think it will work? link below of the guide http://blog.azib.net/2013/12/how-i-upgr ... as-to.html HI Werter, I have some issue (the 5th disk is initialized but I can't expand the volume), have you find a solution ? Thanks, Quote Link to comment Share on other sites More sharing options...
Werter Posted July 29, 2014 Share #527 Posted July 29, 2014 HI Werter, I have some issue (the 5th disk is initialized but I can't expand the volume), have you find a solution ? Thanks, NeoID have an soulution and guide on this forum in the guide section and works like a charm viewtopic.php?f=15&t=3339 Quote Link to comment Share on other sites More sharing options...
newbi Posted July 29, 2014 Share #528 Posted July 29, 2014 Does this work ok on a HP N54L? coming from gnoBoot? thanks. Oh and what image should I get..64bit? Quote Link to comment Share on other sites More sharing options...
yak103 Posted July 29, 2014 Share #529 Posted July 29, 2014 The SSH and task methods are not working for me. My current version is DSM 5.0-4493 Update 2 I have downloaded DSM 5.0-4493 Update 3, to my local PC I launch the manual update through the DSM Web GUI... "Transferring data...". I stop at the "Do you want to continue" dialog box SSH, log in as root, type in: sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 mv /autoupd@te.info1 /autoupd@te.info Hit enter in SSH, and this is displayed: ...directory issue ? In any case, going forward with the update fails with a temp directory does not exist message... Help... Quote Link to comment Share on other sites More sharing options...
Sirus Posted July 30, 2014 Share #530 Posted July 30, 2014 Glad to see, that the power button ist back in action ( HP N54L ) Quote Link to comment Share on other sites More sharing options...
manfriday Posted July 31, 2014 Share #531 Posted July 31, 2014 The SSH and task methods are not working for me.My current version is DSM 5.0-4493 Update 2 I have downloaded DSM 5.0-4493 Update 3, to my local PC I launch the manual update through the DSM Web GUI... "Transferring data...". I stop at the "Do you want to continue" dialog box SSH, log in as root, type in: sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 mv /autoupd@te.info1 /autoupd@te.info Hit enter in SSH, and this is displayed: ...directory issue ? In any case, going forward with the update fails with a temp directory does not exist message... Help... ...Have you tried building a task via DSM GUI and using the command string inside the task? I had a couple of failed attempts sometime back and discovered the error to be mine because of a sequencing issue. The task removed the SSH requirement Quote Link to comment Share on other sites More sharing options...
DVDBob Posted July 31, 2014 Share #532 Posted July 31, 2014 Has anyone been able to get the OpenVM tools to run under 5.0? Quote Link to comment Share on other sites More sharing options...
djelusion Posted August 1, 2014 Share #533 Posted August 1, 2014 i tried going to the nanoboot site and its like popup malware virus bullshit.. da fuq man?? is there a legitimate source of this nanoboot?. nanoboot.tk is what im refering to. I did find this after google searching so hopefully the original poster will add this instead. http://xpenology.trantor.be/nanoboot/ Quote Link to comment Share on other sites More sharing options...
Hennie-M Posted August 1, 2014 Share #534 Posted August 1, 2014 Quick question, I run DSM5 on my HP N36L and I bought an Asrock Q1900-ITX motherboard. Can I just plugin the usb stick and harddrives into that board and migrate like that? Or is an reinstall recommended? Quote Link to comment Share on other sites More sharing options...
Schnapps Posted August 1, 2014 Share #535 Posted August 1, 2014 Quick question, I run DSM5 on my HP N36L and I bought an Asrock Q1900-ITX motherboard. Can I just plugin the usb stick and harddrives into that board and migrate like that? Or is an reinstall recommended? Mate, just migrate your hard-drives and you'll be ok Quote Link to comment Share on other sites More sharing options...
dato Posted August 1, 2014 Share #536 Posted August 1, 2014 hi sorry if i missed it in the thread... I have just upgraded from gnoboot to nanobook (4493) on my n54l. I have a 5th HD drive in the cd-rom bay and have had the bios hack/upgrade working fine up until now. During the upgrade to 4493 I chose the option to migrate settings etc and now I cannot access volume 2 (which is the 5th HD) any tips or advice or will I need to downgrade back to gnoboot? Thanks Quote Link to comment Share on other sites More sharing options...
dato Posted August 2, 2014 Share #537 Posted August 2, 2014 For any one with this issue, I just used the GNOBoot drive and the 5th SATA hard drive worked again. Quote Link to comment Share on other sites More sharing options...
K-Li Posted August 3, 2014 Share #538 Posted August 3, 2014 Hi Guys! With the last update of DSM, has anybody tried to enable SSD caching? There was bugs with nanoboot but no news since the last update. I wonder if it works well now or not, before buying SSD ... Thanks ! Quote Link to comment Share on other sites More sharing options...
Schnapps Posted August 3, 2014 Share #539 Posted August 3, 2014 You don't need it and you'll need 2 SSDs of the same type Quote Link to comment Share on other sites More sharing options...
K-Li Posted August 4, 2014 Share #540 Posted August 4, 2014 What do you mean by "you don't need it"? I wonder if this fonctionnality works or not, not your point of view about it. Quote Link to comment Share on other sites More sharing options...
Schnapps Posted August 4, 2014 Share #541 Posted August 4, 2014 What do you mean by "you don't need it"? I wonder if this fonctionnality works or not, not your point of view about it. Well the SSDs are welcome when you have more than 12HDDs or lots of users accessing that NAS. Bloody hell! You actually don't need SATA III if you have only HDDs. SSDs are used for caching files in transfer. For a home NAS you don't need to spend 200$ for something you like but don't use Cheers Quote Link to comment Share on other sites More sharing options...
b_seeker Posted August 6, 2014 Share #542 Posted August 6, 2014 For any one with this issue, I just used the GNOBoot drive and the 5th SATA hard drive worked again. I also use nanoboot with the same issues, it maybe be your answer also http://terfmop.co.uk/blog/2013/07/31/allow-hot-plug-sata-and-5th-sata-port-full-speed-on-hp-n54l-proliant-microserver/ Quote Link to comment Share on other sites More sharing options...
SaintTDI Posted August 6, 2014 Share #543 Posted August 6, 2014 hi all... I've just update my N54L to DSM5 - 4493 - update 3 with Nanoboot. Actually, I can't see my 5th SATA Hard Drive, connected on the CDROM Drive, is there an issue with this? I would like to mount my 5th hard drive to the other 4, to make a volume with 5x3TB hard drive. I have updated the BIOS, and have all the settings right on it. Is it possibile? thank you very much Quote Link to comment Share on other sites More sharing options...
ckchow2005 Posted August 7, 2014 Share #544 Posted August 7, 2014 hi all... I've just update my N54L to DSM5 - 4493 - update 3 with Nanoboot. Actually, I can't see my 5th SATA Hard Drive, connected on the CDROM Drive, is there an issue with this? I would like to mount my 5th hard drive to the other 4, to make a volume with 5x3TB hard drive. I have updated the BIOS, and have all the settings right on it. Is it possibile? thank you very much I also have N54L, but I can't used nanoboot 5.0.3.1 which I can't use DSM5-4493, only can run 5.0.2.4+5-4482..... you use EXsi? or just nanoboot directly? Due to Synolocker, I wish get the latest version of DSM..... Please help. Quote Link to comment Share on other sites More sharing options...
SaintTDI Posted August 7, 2014 Share #545 Posted August 7, 2014 hi all... I've just update my N54L to DSM5 - 4493 - update 3 with Nanoboot. Actually, I can't see my 5th SATA Hard Drive, connected on the CDROM Drive, is there an issue with this? I would like to mount my 5th hard drive to the other 4, to make a volume with 5x3TB hard drive. I have updated the BIOS, and have all the settings right on it. Is it possibile? thank you very much I also have N54L, but I can't used nanoboot 5.0.3.1 which I can't use DSM5-4493, only can run 5.0.2.4+5-4482..... you use EXsi? or just nanoboot directly? Due to Synolocker, I wish get the latest version of DSM..... Please help. Hi... I used nanoboot directly without EXsi how come you cant use the nanoboot 5.0.3.1 ? Quote Link to comment Share on other sites More sharing options...
mario661 Posted August 7, 2014 Share #546 Posted August 7, 2014 I keep getting this error message when Nanoboot tries to initialize the NIC: "Error internal NIC devices 2 does not equal to internal NIC number 4" y point me in the right direction? Thanks. To answer myself (ashamed ) the error has (in my case) no effect on network connectivity. I was able to find my 'NAS' and install the software. If you can't find your NAS, your problem might be due to something else. Quote Link to comment Share on other sites More sharing options...
ckchow2005 Posted August 8, 2014 Share #547 Posted August 8, 2014 hi all... I've just update my N54L to DSM5 - 4493 - update 3 with Nanoboot. Actually, I can't see my 5th SATA Hard Drive, connected on the CDROM Drive, is there an issue with this? I would like to mount my 5th hard drive to the other 4, to make a volume with 5x3TB hard drive. I have updated the BIOS, and have all the settings right on it. Is it possibile? thank you very much I also have N54L, but I can't used nanoboot 5.0.3.1 which I can't use DSM5-4493, only can run 5.0.2.4+5-4482..... you use EXsi? or just nanoboot directly? Due to Synolocker, I wish get the latest version of DSM..... Please help. Hi... I used nanoboot directly without EXsi how come you cant use the nanoboot 5.0.3.1 ? Really? I got error message when booting up from nanoboot (before installing). when installing, it just stopped half way with an error.... Where you get your 4493 PAT file?? I am using the one directly from Synology site. Quote Link to comment Share on other sites More sharing options...
Chunkydoc Posted August 9, 2014 Share #548 Posted August 9, 2014 Yes! I have wrote those lines and did the upgrade several times for several colleagues Sent from my iPhone using Tapatalk Thanks for the confirmation. One more question if I may, which PAT file do I use? Looking at my old installation for 4.2 I used the DS3612 file, but I can't seem to locate the equivalent for version 5. Quote Link to comment Share on other sites More sharing options...
PF62 Posted August 9, 2014 Share #549 Posted August 9, 2014 For any one with this issue, I just used the GNOBoot drive and the 5th SATA hard drive worked again. I also use nanoboot with the same issues, it maybe be your answer also http://terfmop.co.uk/blog/2013/07/31/allow-hot-plug-sata-and-5th-sata-port-full-speed-on-hp-n54l-proliant-microserver/ I found the answer (eventually) by using the BIOS mentioned in the comments section here -http://www.xpenology.nl/hp-n40l-n54l-bios-modificatie/#comments (http://www.share-online.biz/dl/CQTJ55XMZ4DY/free/) and then adjusting the settings to the same as mentioned above at - http://terfmop.co.uk/blog/2013/07/31/allow-hot-plug-sata-and-5th-sata-port-full-speed-on-hp-n54l-proliant-microserver/ Quote Link to comment Share on other sites More sharing options...
Schnapps Posted August 10, 2014 Share #550 Posted August 10, 2014 Yes! I have wrote those lines and did the upgrade several times for several colleagues Sent from my iPhone using Tapatalk Thanks for the confirmation. One more question if I may, which PAT file do I use? Looking at my old installation for 4.2 I used the DS3612 file, but I can't seem to locate the equivalent for version 5. Use the DS3612xs pat file. All xpenology work is based mainly on that version. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.