Recommended Posts

Hello all,

 

Many thanks to gnoboot for his release of 10.5.

I booted my server using the newly built USB stick : no problem!

I downloaded the DSM5 update 2 pat from http://ukdl.synology.com/download/criti ... 3612xs.pat

I used the DSM update GUI to manually update using that pat file.

3 minutes later the system was rebooted with no configuration or data loss!

 

Regards

Link to post
Share on other sites

Hmm, not for me. I have trouble updating my System.

 

Already tried with Update 1 with the shell command from the other update thread. Did not work. Now I tried update 2 with new gnoboot image. Same error.

 

capture6asof.png

 

Message says: "Update failed. File is broken."

It showed up on both update methodes. Doesn't matter if manually or automatically. Any Ideas?

 

Edit: just want to add something.

ssh command says:

 

DiskStation> sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd
@te.info1
-sh: can't create /autoupd@te.info1: Permission denied

Link to post
Share on other sites

Updated without problems. N54L with gnoboot 10.5 (DSM 5.0-4458-update1 to Update 2)

My procedure:

 

1. I download update from ( http://ukdl.synology.com/download/criticalupdate/update_pack/4458-2/synology_bromolow_3612xs.pat) in PC

2. Go to DSM -> Control Panel-> Update-> Manual Update

Select "synology_bromolow_3612xs.pat" , and load de file in DSM.

Stop when a new window thats says do no power off the system while update.

3. Go to PC , connect as root to DSM with ssh and write

sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1
  mv /autoupd@te.info1 /autoupd@te.info

4. Go to DSM and continue to update, reboot, and all ok.

Link to post
Share on other sites
Updated without problems. N54L with gnoboot 10.5 (DSM 5.0-4458-update1 to Update 2)

My procedure:

 

1. I download update from ( http://ukdl.synology.com/download/criticalupdate/update_pack/4458-2/synology_bromolow_3612xs.pat) in PC

2. Go to DSM -> Control Panel-> Update-> Manual Update

Select "synology_bromolow_3612xs.pat" , and load de file in DSM.

Stop when a new window thats says do no power off the system while update.

3. Go to PC , connect as root to DSM with ssh and write

sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1
  mv /autoupd@te.info1 /autoupd@te.info

4. Go to DSM and continue to update, reboot, and all ok.

 

Thanks antelo, this method worked a treat for me :smile:

Link to post
Share on other sites

Great . it is work ~~ thanks

 

Updated without problems. N54L with gnoboot 10.5 (DSM 5.0-4458-update1 to Update 2)

My procedure:

 

1. I download update from ( http://ukdl.synology.com/download/criticalupdate/update_pack/4458-2/synology_bromolow_3612xs.pat) in PC

2. Go to DSM -> Control Panel-> Update-> Manual Update

Select "synology_bromolow_3612xs.pat" , and load de file in DSM.

Stop when a new window thats says do no power off the system while update.

3. Go to PC , connect as root to DSM with ssh and write

sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1
  mv /autoupd@te.info1 /autoupd@te.info

4. Go to DSM and continue to update, reboot, and all ok.

Link to post
Share on other sites

Hi,

this is my first post so first i want to thank those guys who keep this projet running.

I am on an n54l with trantors DSM4.3.

Rocksolid. Nothing to complain. But the newer, the better. So tried gnoboots DSM 5. Update semmed to work fine.

Usual problems with permissions and user "http" for the webserver.

Only mariadb could not be installed. Therefore i had to downgrade back to trantor. Anyone of you is running mariadb? Any tricks when installing?

 

thanks

Link to post
Share on other sites
Updated without problems. N54L with gnoboot 10.5 (DSM 5.0-4458-update1 to Update 2)

My procedure:

 

1. I download update from ( http://ukdl.synology.com/download/criticalupdate/update_pack/4458-2/synology_bromolow_3612xs.pat) in PC

2. Go to DSM -> Control Panel-> Update-> Manual Update

Select "synology_bromolow_3612xs.pat" , and load de file in DSM.

Stop when a new window thats says do no power off the system while update.

3. Go to PC , connect as root to DSM with ssh and write

sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1
  mv /autoupd@te.info1 /autoupd@te.info

4. Go to DSM and continue to update, reboot, and all ok.

 

Thanks antelo, this method worked a treat for me :smile:

 

nice, Ok for me too now :razz:

ThX

Link to post
Share on other sites
Updated without problems. N54L with gnoboot 10.5 (DSM 5.0-4458-update1 to Update 2)

My procedure:

 

1. I download update from ( http://ukdl.synology.com/download/criticalupdate/update_pack/4458-2/synology_bromolow_3612xs.pat) in PC

2. Go to DSM -> Control Panel-> Update-> Manual Update

Select "synology_bromolow_3612xs.pat" , and load de file in DSM.

Stop when a new window thats says do no power off the system while update.

3. Go to PC , connect as root to DSM with ssh and write

sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1
  mv /autoupd@te.info1 /autoupd@te.info

4. Go to DSM and continue to update, reboot, and all ok.

 

 

Worked fine for me! Thanks;)

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.