infonator8 Posted February 15, 2021 Share #251 Posted February 15, 2021 On 2/11/2021 at 6:03 PM, IG-88 said: YES, the 6.2.3 comes with its own newer i915 driver for intel quick sync video on gemini lake and the kernel changes synology made will have the i915 driver jun made not working my extra/extra2 for 918+ takes care of this (there is some more description about that in the 1st post) https://xpenology.com/forum/topic/28321-driver-extension-jun-103b104b-for-dsm623-for-918-3615xs-3617xs/ Hmm, did it but still no success. Still no activation.conf and on Video Station I can only select the "Prohibit Transcoding" transcoding option. Quote Link to comment Share on other sites More sharing options...
IG-88 Posted February 15, 2021 Share #252 Posted February 15, 2021 6 hours ago, infonator8 said: Hmm, did it but still no success. Still no activation.conf and on Video Station I can only select the "Prohibit Transcoding" transcoding option. 1st check if something in /dev/dri is present after booting if not check /var/log/dmesg if that woks out and the driver is working properly you can continue Quote Link to comment Share on other sites More sharing options...
infonator8 Posted February 15, 2021 Share #253 Posted February 15, 2021 4 hours ago, IG-88 said: 1st check if something in /dev/dri is present after booting if not check /var/log/dmesg if that woks out and the driver is working properly you can continue Yes, /dev/dri is present. /var/log/dmesg seems to be alright. Quote Link to comment Share on other sites More sharing options...
shukan20047 Posted February 15, 2021 Share #254 Posted February 15, 2021 THANK Quote Link to comment Share on other sites More sharing options...
IG-88 Posted February 15, 2021 Share #255 Posted February 15, 2021 6 hours ago, infonator8 said: Yes, /dev/dri is present. /var/log/dmesg seems to be alright. then you should continue here https://xpenology.com/forum/topic/24864-transcoding-without-a-valid-serial-number/ 1 Quote Link to comment Share on other sites More sharing options...
infonator8 Posted February 15, 2021 Share #256 Posted February 15, 2021 1 hour ago, IG-88 said: then you should continue here https://xpenology.com/forum/topic/24864-transcoding-without-a-valid-serial-number/ Interesting. Seems my serial has been baned. Thanks, @IG-88, it's working now. Quote Link to comment Share on other sites More sharing options...
VanChle Posted June 24, 2021 Share #257 Posted June 24, 2021 On 12/25/2018 at 3:17 PM, Olegin said: 3. Perhaps the most optimal budget solutions with transcoding will be the following: ASRock J4105-ITX Asrock J5005-ITX Hello I'm new to this and i want to ask If This MB is capability with DS918+ "ASROCK J5040" Quote Link to comment Share on other sites More sharing options...
flyride Posted June 24, 2021 Share #258 Posted June 24, 2021 All the current J-series motherboards should work. Quote Link to comment Share on other sites More sharing options...
VanChle Posted June 24, 2021 Share #259 Posted June 24, 2021 Just now, flyride said: All the current J-series motherboards should work. Thank you For your quick respone Quote Link to comment Share on other sites More sharing options...
asheenlevrai Posted October 15, 2021 Share #260 Posted October 15, 2021 On 12/25/2018 at 2:17 PM, Olegin said: set netif_num=2 #number of network cards Number of network cards or number of ethernet ports? For NICs with multiple Ethernet port... Quote Link to comment Share on other sites More sharing options...
Olegin Posted October 15, 2021 Author Share #261 Posted October 15, 2021 3 часа назад, asheenlevrai сказал: Number of network cards or number of ethernet ports? ports 1 Quote Link to comment Share on other sites More sharing options...
asheenlevrai Posted October 15, 2021 Share #262 Posted October 15, 2021 (edited) 2 hours ago, Olegin said: ports Thanks @Olegin So if I have 2 NICs, one of them with 4 ports, then: set netif_num=5 right? Edited October 15, 2021 by asheenlevrai Quote Link to comment Share on other sites More sharing options...
Olegin Posted October 15, 2021 Author Share #263 Posted October 15, 2021 1 час назад, asheenlevrai сказал: So if I have 2 NICs, one of them with 4 ports, then: set netif_num=5 right? Yes and write in grub.cfg (exs): set mac1=001132123456 set mac2=001132123457 set mac3=001132123458 set mac4=001132123459 set mac5=001132123460 set netif_num=5 1 Quote Link to comment Share on other sites More sharing options...
snowfox Posted October 16, 2021 Share #264 Posted October 16, 2021 (edited) sorry Edited October 16, 2021 by snowfox Quote Link to comment Share on other sites More sharing options...
Florian83260 Posted August 1, 2022 Share #265 Posted August 1, 2022 Hi, i have already an xpenology DS918+ on 1.04b with a valid serial and mac but i don't have dev/dri folder. Is-it possible to creat it ? Or shall i restart a new install with your files ? Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.