sbv3000 Posted October 16, 2019 Share #1576 Posted October 16, 2019 4 hours ago, syno406 said: is there a step by step tutorial on how to update to DSM 6.2 from DSM 6.1-15047? Just follow the same process as described in the install/upgrade tutorials for 6.1, but using the bootloader for 6.2, for your hardware/model Before you attempt to upgrade, disconnect your raid drives and do a thorough hardware test and complete installation using the 6.2 loader onto a spare hdd. Once you are happy your hardware is all ok then you can boot/migrate your system. Data should be backed up of course. Quote Link to comment Share on other sites More sharing options...
sbv3000 Posted October 16, 2019 Share #1577 Posted October 16, 2019 29 minutes ago, Kamilos said: Hello, with another bootloader I had active 2 x LAN 3615xs. Now with this img only 1 x LAN? What is wrong? can you post some info about your hardware? Quote Link to comment Share on other sites More sharing options...
Kamilos Posted October 16, 2019 Share #1578 Posted October 16, 2019 23 minutes ago, sbv3000 said: can you post some info about your hardware? Motherboard: GIGABYTE H97N-WIFI CPU: Intel core i3-4130 16 GB RAM 4 x disk Another pc problem does not shut down. Only disks turned off, fan running. Quote Link to comment Share on other sites More sharing options...
sbv3000 Posted October 16, 2019 Share #1579 Posted October 16, 2019 24 minutes ago, Kamilos said: Motherboard: GIGABYTE H97N-WIFI CPU: Intel core i3-4130 16 GB RAM 4 x disk Another pc problem does not shut down. Only disks turned off, fan running. probably missing the atheros driver and you need to use ig-88 replacement extra.lzma driver extension Quote Link to comment Share on other sites More sharing options...
Kamilos Posted October 16, 2019 Share #1580 Posted October 16, 2019 Thank you, I remember something with OSFmount. I don't know how it's done? Can I find instructions? Quote Link to comment Share on other sites More sharing options...
sbv3000 Posted October 16, 2019 Share #1581 Posted October 16, 2019 3 hours ago, Kamilos said: Thank you, I remember something with OSFmount. I don't know how it's done? Can I find instructions? If you have followed the usb setup guide to open and edit the boot loader and change vid/pid etc, then its the same process, but you access the partition with the extra.lzma file and copy the extended version over it Quote Link to comment Share on other sites More sharing options...
Novarg Posted October 28, 2019 Share #1582 Posted October 28, 2019 Hi, Upgraded from 6.1.7 to 6.2.2 and my install got totally broken. Microserver gen 8, esxi 6.5, 1.03b loader (so it is easy to roll back tho) Upgrade finished as always, but then i noticed that i just can't login into my account through web interface. After login i see blank white page and in browser console lot of 404 ajax requests. What is strange is that i can login through mobile but it looks like nas can't read settings properly (e.g. network settings are blank, in update/restore section it tells that it can't check new version because i not connected to internet). It looks like some files've been corrupted or some permissions changed i don't know. It may be even my prev 6.1.7 broken because few days ago i lost all my notes because note station start to throw errors about permissions. I tried to restore them from backup but this process just cleared all my notes... Could anyone advice what to do here please? Quote Link to comment Share on other sites More sharing options...
Novarg Posted October 29, 2019 Share #1583 Posted October 29, 2019 End up with clean installed 6.2.2, then put my data disks there. All config is lost but at least my data is here. Quote Link to comment Share on other sites More sharing options...
Novarg Posted October 30, 2019 Share #1584 Posted October 30, 2019 Day after such upgrade 2 volumes have crashed. 2 separate disks crashed one by one. 1st disk crashe when i changed permissions for folder with my time machine backup. I not used raid (syno actually used raid with single disk under the hood).I was able to copy all data from 1st disk under ubuntu yesterday. Second disk (volume) just crashed when i copy all files via hyper backup with rsync to my new OMV powered VM. It is weird is that s.m.a.r.t. doesn't show any problems for first disk and fsck reported that it was able to restore filesystem. I'm now pulling out 2nd disk and will try to rescue data under ubuntu too. What the hell is going on with my nas. Quote Link to comment Share on other sites More sharing options...
1Kokies Posted November 1, 2019 Share #1585 Posted November 1, 2019 On 9/30/2018 at 5:46 AM, Captainfingerbang said: Very important Also: Disable C1E - in your bios its labeled "C-states" i believe look at second image below for this disable Intel VTX if you can as well- 2nd image though this was posted a year ago, it certainly helped a lot, thanks a lot Quote Link to comment Share on other sites More sharing options...
IG-88 Posted November 1, 2019 Share #1586 Posted November 1, 2019 4 hours ago, 1Kokies said: though this was posted a year ago, it certainly helped a lot, thanks a lot yes and that's the reason why its part of the "official" tutorial (in red writing) https://xpenology.com/forum/topic/7973-tutorial-installmigrate-dsm-52-to-61x-juns-loader/ 1 Quote Link to comment Share on other sites More sharing options...
1Kokies Posted November 1, 2019 Share #1587 Posted November 1, 2019 4 hours ago, IG-88 said: yes and that's the reason why its part of the "official" tutorial (in red writing) https://xpenology.com/forum/topic/7973-tutorial-installmigrate-dsm-52-to-61x-juns-loader/ thanks again all and will stay active Quote Link to comment Share on other sites More sharing options...
Dickster Posted November 2, 2019 Share #1588 Posted November 2, 2019 I am currently using bootloader 1.02b (3615xs)and running DSM 6.1.7-15284 Update 2. I want tu update to the latest DSM. My hardware: Motherboard: H87i-plus CPU: Pentium G3420 NIC: HP360T I think I have two choices (with the internal NIC disabled). 1. V1.04b (918+). Challenge seems to have a working serial and mac addresses. Tips regarding serial and mac are welcome (PM). 2. V1.03b (3615xs) Which is the best choice? Quote Link to comment Share on other sites More sharing options...
Dickster Posted November 3, 2019 Share #1589 Posted November 3, 2019 (edited) After some more reading i saw that the 1.02b loader and the 1.04b loader are the recommended loaders. My conclusion staying with current loader or upgrading to 1.04b are the recommended choices. Is it allowed here to talk about serial numbers and mac adresses? Edited November 3, 2019 by Dickster Quote Link to comment Share on other sites More sharing options...
IG-88 Posted November 3, 2019 Share #1590 Posted November 3, 2019 On 11/3/2019 at 4:45 PM, Dickster said: 1.04b loader are the recommended loaders. as you cpu seems to Haswell (4thgen intel) you should be able to use 918+ image (loader 1.04b) but if you think you are better off using 3615 or 3617 the feel free to use loader 1.03b 1.02b -> DMS 6.1 1.3b/1.04b -> DSM 6.2 if it's an asus board (you did only give the name, no vendor) then the onboard nic is i217 and would use e1000e driver HP NC360T is a Intel 82571EB, driver would be e1000 you might read a liitle futher depending if you want to use dsm 6.1 or 6.2.0 or 6.2.2 https://xpenology.com/forum/topic/14127-guide-to-native-drivers-dsm-621-on-ds918/ https://xpenology.com/forum/forum/91-additional-compiled-modules/ Quote Link to comment Share on other sites More sharing options...
ikkeenjij36 Posted November 6, 2019 Share #1591 Posted November 6, 2019 Trying to upgrede to dsm 6.2 but none of the loaders works for me...not the 1.03 or the 1.04 running it on a asus mb withm amd 8 core cpu reverting back to dsm 6.1 with 1/02 loader Quote Link to comment Share on other sites More sharing options...
Dickster Posted November 7, 2019 Share #1592 Posted November 7, 2019 I was planning to use the 1.03b loader and stick with the 3215xs. My findings: 1.02b was and is still working perfect 1.04b worked after bios upgrade (looks to work without and with internal NIC disabled). Before bios upgrade I got the “13”error. 1.03b starts but cant be discovered on the network. Have internal NIC disabled and NC360T installed (based on this forum, especialle microserver topic, this looks a supported card). Am is missing something with 1.03b loader (bios setting, extra drivers or something else like that)? I do not have real SN and mac. Any disadvantages for 1.04b over 1.03b or is it best to update my actual system with 1.04b? Hardware: Asus H87i-Plus CPU: Pentium G3420 NIC HP NC360T Quote Link to comment Share on other sites More sharing options...
bglf83 Posted November 14, 2019 Share #1593 Posted November 14, 2019 I was planning to use the 1.03b loader and stick with the 3215xs. My findings: 1.02b was and is still working perfect 1.04b worked after bios upgrade (looks to work without and with internal NIC disabled). Before bios upgrade I got the “13”error. 1.03b starts but cant be discovered on the network. Have internal NIC disabled and NC360T installed (based on this forum, especialle microserver topic, this looks a supported card). Am is missing something with 1.03b loader (bios setting, extra drivers or something else like that)? I do not have real SN and mac. Any disadvantages for 1.04b over 1.03b or is it best to update my actual system with 1.04b? Hardware: Asus H87i-Plus CPU: Pentium G3420 NIC HP NC360TDid you configure it to use legacy bios instead of UEFI for 1.03b? Quote Link to comment Share on other sites More sharing options...
Next Posted November 17, 2019 Share #1594 Posted November 17, 2019 Tried to install DS3615XS DSM6.2. Motherboard MSI Gaming 7 Z97 It’s booting but then in the Synology assistant I don’t find anything. Tried DS3617XS same issue. Then I tried DS918+ I found it in the Sybology assistant. I wanted to disconnect some HDD’s I rebooted again Synology assistant don’t finds it anymore. Somebody that can help me? Thanks! Quote Link to comment Share on other sites More sharing options...
Dickster Posted November 18, 2019 Share #1595 Posted November 18, 2019 On 11/14/2019 at 12:43 PM, bglf83 said: On 11/7/2019 at 5:37 PM, Dickster said: ….. Did you configure it to use legacy bios instead of UEFI for 1.03b? I tried various options under CSM (Compatibility support mode). Where possible legacy only and if not possible legacy first. Non of the options seem to work. It does boot from the USB drive as i get the "happy hacking" screen. Is this the correct place in the bios for "legacy boot"? Was the only yhing i could find. Quote Link to comment Share on other sites More sharing options...
forcefullpower Posted November 22, 2019 Share #1596 Posted November 22, 2019 I am trying to upgrade to using 1.03b even tried the extra files but not getting any network connection to the server. Its not even showing any disc activity either from the raid car. This is set to IT mode and pass through. It is the following motherboard so it should work without an issues. Intel Desktop Board DQ77KB Both Intel Nics Quote Link to comment Share on other sites More sharing options...
bglf83 Posted November 23, 2019 Share #1597 Posted November 23, 2019 Search the forums on how t check which network driver your machine is currently using. If it’s an e1000e it’s pretty safe.I can search from a desktop to find it if you cannot. 1 Quote Link to comment Share on other sites More sharing options...
de.hessi.james Posted November 24, 2019 Share #1598 Posted November 24, 2019 Hi, I'm planning to upgrade my ASRock Q1900DC-ITX from DSM 6.1 to DSM 6.2. In some test I recognized that the interal network card is not recognized by the latest Version of DSM 6.2 I added a Intel 82576 network card, but that works only with Loader v1.03b. Now my question: Will v1.03b be supported in future and is there a recomended network card for v1.04b (PCIe 2.0 x1)? The thing is that if I buy a new networkiadapter, it shoud be compatible to the next loader an DSM Versions. Thanks for your help! Quote Link to comment Share on other sites More sharing options...
bglf83 Posted November 24, 2019 Share #1599 Posted November 24, 2019 Hi, I'm planning to upgrade my ASRock Q1900DC-ITX from DSM 6.1 to DSM 6.2. In some test I recognized that the interal network card is not recognized by the latest Version of DSM 6.2 I added a Intel 82576 network card, but that works only with Loader v1.03b. Now my question: Will v1.03b be supported in future and is there a recomended network card for v1.04b (PCIe 2.0 x1)? The thing is that if I buy a new networkiadapter, it shoud be compatible to the next loader an DSM Versions. Thanks for your help!I am not sure how safe the currently working cards are, however I believe 6.2 will receive 2 years of security updates after 7.0 comes out. Quote Link to comment Share on other sites More sharing options...
de.hessi.james Posted November 24, 2019 Share #1600 Posted November 24, 2019 1 hour ago, bglf83 said: I am not sure how safe the currently working cards are, however I believe 6.2 will receive 2 years of security updates after 7.0 comes out. Ok, is there a list of working nics for v1.04b? Didn't find one yet. Some postings say, that Intel 9301CT Gigabit CT Desktop BLK (EXPI9301CTBLK) should work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.