maikst Posted February 20, 2014 Share #326 Posted February 20, 2014 Why so complicated? Again: why so complicated ??? Please just make simple downloadble files without jdownload etc and it will take much less time to get started... Or is this a test? Yes, I think the same thing too... It's alpha! Don't expect a fully working boot image in every release. my only issue is rmmod seems to not be working anymore. So I can't prevent kernel mods from loading. Notice it too, but I don't have time to investigate. Thanks for reporting! Yes, you are right... it is alpha software... but the download is really challenging Anyway, this evening I found the time to test Alpha 8... I used a HP ML110 G7, 12GB with a SD Card (SD Card reader directly on the mainboard) for booting and 2 SATA HDD for data. GREAT Job ! Well Done.... it was working out of the box until now without any issues... surprising. Thank you for you work! After complete check of the disks... still running... I will copy a few TB to see how it is working, tomorrow... I have the possibilty to compare directly with a DS1513+ Until now.... no difference...just faster. Maik Quote Link to comment Share on other sites More sharing options...
Mayo Posted February 20, 2014 Share #327 Posted February 20, 2014 Hello, Little question, I had synoboot and changed for gnoboot because I wanted to upgrade to 3827. It works fine... but... Before changing for gnoboot, I had a transfer rate about 90mb/s to 100mb/s. Now I'm begin to above 120mb/s (same as earlier) but it drop to 40 mb/s... so I was wondering if it is because of the ethernet driver use by gnoboot, or a bug in the lastest version of DSM. Did anybody had the same problem ? Thanks a lot ! Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 20, 2014 Author Share #328 Posted February 20, 2014 Hello, Little question, I had synoboot and changed for gnoboot because I wanted to upgrade to 3827. It works fine... but... Before changing for gnoboot, I had a transfer rate about 90mb/s to 100mb/s. Now I'm begin to above 120mb/s (same as earlier) but it drop to 40 mb/s... so I was wondering if it is because of the ethernet driver use by gnoboot, or a bug in the lastest version of DSM. Did anybody had the same problem ? Thanks a lot ! It's probably ethernet driver which is older compared to Trantor's synoboot. Could you provide the `lspci -vvv` result? Yes, you are right... it is alpha software... but the download is really challenging Anyway, this evening I found the time to test Alpha 8... I used a HP ML110 G7, 12GB with a SD Card (SD Card reader directly on the mainboard) for booting and 2 SATA HDD for data. GREAT Job ! Well Done.... it was working out of the box until now without any issues... surprising. Thank you for you work! After complete check of the disks... still running... I will copy a few TB to see how it is working, tomorrow... I have the possibilty to compare directly with a DS1513+ Until now.... no difference...just faster. Maik Don't forget to send your feedback and support my effort by clicking the ADs at my blog. I just notice DSM 5.0 toolchain is available for download. The next release might be delayed for a week or so. I'm currently working on getting max cpu to the maximum but iSCSI keeps on failing and sometimes crashing the system. Quote Link to comment Share on other sites More sharing options...
maikst Posted February 20, 2014 Share #329 Posted February 20, 2014 would like to click on your ads... but our proxy is filtering them.. I will do it from my 3G connection .... but please consider a paypal donate button... Quote Link to comment Share on other sites More sharing options...
Mayo Posted February 21, 2014 Share #330 Posted February 21, 2014 Hello, Little question, I had synoboot and changed for gnoboot because I wanted to upgrade to 3827. It works fine... but... Before changing for gnoboot, I had a transfer rate about 90mb/s to 100mb/s. Now I'm begin to above 120mb/s (same as earlier) but it drop to 40 mb/s... so I was wondering if it is because of the ethernet driver use by gnoboot, or a bug in the lastest version of DSM. Did anybody had the same problem ? Thanks a lot ! It's probably ethernet driver which is older compared to Trantor's synoboot. Could you provide the `lspci -vvv` result? I tried to install ipkg to make lspci but I was unable to do it noob inside Quote Link to comment Share on other sites More sharing options...
htpcdude Posted February 21, 2014 Share #331 Posted February 21, 2014 I keep getting a 'Fixing recurive fault but reboot is needed!' message when I try to install this onto laptops. Am I doing something wrong? Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 21, 2014 Author Share #332 Posted February 21, 2014 I keep getting a 'Fixing recurive fault but reboot is needed!' message when I try to install this onto laptops. Am I doing something wrong? I don't recommend installing on laptops. Since synoboot is using 3.2.40 kernel your laptop might need a particular firmware/driver which isn't available, refer to this bug report. Quote Link to comment Share on other sites More sharing options...
Diverge Posted February 21, 2014 Share #333 Posted February 21, 2014 Any chance of getting synodisk to report hard drive temps correctly in VM? I know this plagues all the XPenology releases, so I don't really expect much. Just not sure why it doesn't work since smartctl can read temps just fine, but synodisk returns -1 (it actually returns -1 for any /dev/sdX you use, even drives that don't exist). Quote Link to comment Share on other sites More sharing options...
j911 Posted February 21, 2014 Share #334 Posted February 21, 2014 Any chance of getting synodisk to report hard drive temps correctly in VM? I know this plagues all the XPenology releases, so I don't really expect much. Just not sure why it doesn't work since smartctl can read temps just fine, but synodisk returns -1 (it actually returns -1 for any /dev/sdX you use, even drives that don't exist). How are you presenting your disk drives? I've passed through my sata controller to xpenology and it reads the temps just fine. Quote Link to comment Share on other sites More sharing options...
Diverge Posted February 21, 2014 Share #335 Posted February 21, 2014 Any chance of getting synodisk to report hard drive temps correctly in VM? I know this plagues all the XPenology releases, so I don't really expect much. Just not sure why it doesn't work since smartctl can read temps just fine, but synodisk returns -1 (it actually returns -1 for any /dev/sdX you use, even drives that don't exist). How are you presenting your disk drives? I've passed through my sata controller to xpenology and it reads the temps just fine. Well I have 2 systems right now; a test system on a DH61AG w/ i3 2120T, and my main is a DQ77KB w/ i7 3770T. My main system is setup with esxi 5.5, and configured for RDM with onboard intel controller. My test system is setup with esxi 5.5, and RDM with LSI 9201-8i controller. I haven't tried passing through my LSI controller yet, since my test system doesn't support VTd. I plan to eventually move the LSI to my main system as I'm building a new custom enclosure for everything, and will probably test out passing through the LSI controller then. In any event, smartctl built into DSM can read the temps on the RDM'd drives, also other OS's can read temps fine. It's just synodisk that doesn't like RDM I guess. Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 22, 2014 Author Share #336 Posted February 22, 2014 Any chance of getting synodisk to report hard drive temps correctly in VM? I know this plagues all the XPenology releases, so I don't really expect much. Just not sure why it doesn't work since smartctl can read temps just fine, but synodisk returns -1 (it actually returns -1 for any /dev/sdX you use, even drives that don't exist). How are you presenting your disk drives? I've passed through my sata controller to xpenology and it reads the temps just fine. Well I have 2 systems right now; a test system on a DH61AG w/ i3 2120T, and my main is a DQ77KB w/ i7 3770T. My main system is setup with esxi 5.5, and configured for RDM with onboard intel controller. My test system is setup with esxi 5.5, and RDM with LSI 9201-8i controller. I haven't tried passing through my LSI controller yet, since my test system doesn't support VTd. I plan to eventually move the LSI to my main system as I'm building a new custom enclosure for everything, and will probably test out passing through the LSI controller then. In any event, smartctl built into DSM can read the temps on the RDM'd drives, also other OS's can read temps fine. It's just synodisk that doesn't like RDM I guess. Try using physical RDM? Quote Link to comment Share on other sites More sharing options...
Diverge Posted February 22, 2014 Share #337 Posted February 22, 2014 Try using physical RDM? They are physical RDM. No go for DSM. But other OS can read temp; example open media vault can. Just seems synodisk doesn't like RDM. Quote Link to comment Share on other sites More sharing options...
carlchan Posted February 23, 2014 Share #338 Posted February 23, 2014 Dear Ayone could tell me how to make Alpha 8 become .img ? Or how to make usb disk image to .img? In windows or linux? Thank you! Quote Link to comment Share on other sites More sharing options...
mff Posted February 23, 2014 Share #339 Posted February 23, 2014 @gnoboot I saw your recent blog posting about cpu power management. Great that you have this still in mind. As I read in serveral forums linux powersaving with modern (haswell) cpu is quite tricky, but I'm not a linux developer . Also sata link power management seems to be a big thing for good idle power values. http://www.heise.de/forum/c-t/Bauvorschlaege-fuer-PCs-und-Server/Re-Bauvorschlag-c-t-19-13-Experimente-mit-Ubuntu-13-04-x86-64/posting-401185/show/ Best power management is only achieved in Windows* and when several drivers are installed (Intel Inf, RST, GPU, Audio, Lan, MEI). *http://www.heise.de/ct/artikel/c-t-Labs-5-Watt-fuer-eine-Selbstverstaendlichkeit-1948002.html Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 24, 2014 Author Share #340 Posted February 24, 2014 @gnobootI saw your recent blog posting about cpu power management. Great that you have this still in mind. As I read in serveral forums linux powersaving with modern (haswell) cpu is quite tricky, but I'm not a linux developer . Also sata link power management seems to be a big thing for good idle power values. http://www.heise.de/forum/c-t/Bauvorschlaege-fuer-PCs-und-Server/Re-Bauvorschlag-c-t-19-13-Experimente-mit-Ubuntu-13-04-x86-64/posting-401185/show/ Best power management is only achieved in Windows* and when several drivers are installed (Intel Inf, RST, GPU, Audio, Lan, MEI). *http://www.heise.de/ct/artikel/c-t-Labs-5-Watt-fuer-eine-Selbstverstaendlichkeit-1948002.html I agree with you, recent Intel CPU (Haswell) is not yet fully supported from older kernels. But recent developments (3.9+) has initial support for it. For SATA power management, I think it's not a problem as a full support (hibernation) for specific drivers (Marvell) are working excellent. The vendor even has a patent about it. I'm not also a kernel programmer, just pretending. Use my kernel at your own risks. Here' s a preview of my recent work. [spoiler=][ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 4.351649] intel_idle: does not run on family 6 model 37 [ 14.818689] cpuidle: using governor ladder [ 14.819101] cpuidle: using governor menu That intel_idle message doesn't appear w/o the backported driver on virtual machines. This feature has support for recent CPUs (Ivy Bridge and Ivy Bridge Xeon). I will try to get Haswell supported as well. Edit: Also sata link power management seems to be a big thing for good idle power values. ALPM is now available in several SATA controllers that use the Advanced Host Controller Interface (AHCI). However, there is some anecdotal evidence that some controllers may go into a low power state incorrectly and this ends up causing data loss. Ubuntu has the ability to use ALPM but it it disabled by default since it can cause data loss on some machines. Read more... Quote Link to comment Share on other sites More sharing options...
schulzm Posted February 24, 2014 Share #341 Posted February 24, 2014 Hello, i habe a Asrock Z87E-ITX Mainboard. Could you integrate the driver for the Giga PHY Intel® I217V network card in the next version? Thanks Michael Quote Link to comment Share on other sites More sharing options...
pzgz Posted February 25, 2014 Share #342 Posted February 25, 2014 Anyone can confirm if the WOL function can work on not on XP gnoboot version? I tried on my N40L but failed to get WOL work. Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 25, 2014 Author Share #343 Posted February 25, 2014 Hello,i habe a Asrock Z87E-ITX Mainboard. Could you integrate the driver for the Giga PHY Intel® I217V network card in the next version? Thanks Michael it will be included. Anyone can confirm if the WOL function can work on not on XP gnoboot version? I tried on my N40L but failed to get WOL work. Network card details, send me the `lspci -vvv` result? Quote Link to comment Share on other sites More sharing options...
billytheczeh Posted February 25, 2014 Share #344 Posted February 25, 2014 Any chance getting Xen kernel modules into gnoBoot? I would love to use paravir + xe-guest-utilities. Quote Link to comment Share on other sites More sharing options...
pzgz Posted February 25, 2014 Share #345 Posted February 25, 2014 Network card details, send me the `lspci -vvv` result? Thanks, gnuboot. I am using HP N40L. According to the wiki page: http://n40l.wikia.com/wiki/Base_Hardware_N40L, it should be "Onboard NC107i PCI Express Gigabit 10/100/1000". Here is the link to lspci result, it is pretty big so I put it on dropbox: https://www.dropbox.com/s/p5iugc2kguflmg5/lspci.txt For your reference, my NIC MAC address is: a0-b3-cc-ff-fe-df-04-0f. I can see WOL option in Hardware and Power tab, but I cannot save the changes after I enabled the WOL option on NIC. After saving, the checkbox will always get uncheck. I also changed the eth0_wol_options and wol_enabled_options to 'g' in "/etc.defaults/synoinfo.conf", but WOL still cannot work. Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 25, 2014 Author Share #346 Posted February 25, 2014 Network card details, send me the `lspci -vvv` result? Thanks, gnuboot. I am using HP N40L. According to the wiki page: http://n40l.wikia.com/wiki/Base_Hardware_N40L, it should be "Onboard NC107i PCI Express Gigabit 10/100/1000". Here is the link to lspci result, it is pretty big so I put it on dropbox: https://www.dropbox.com/s/p5iugc2kguflmg5/lspci.txt For your reference, my NIC MAC address is: a0-b3-cc-ff-fe-df-04-0f. I can see WOL option in Hardware and Power tab, but I cannot save the changes after I enabled the WOL option on NIC. After saving, the checkbox will always get uncheck. I also changed the eth0_wol_options and wol_enabled_options to 'g' in "/etc.defaults/synoinfo.conf", but WOL still cannot work. Too bad, WOL support for your NIC is not good -> check here. Buy another NIC to satify your needs. Any chance getting Xen kernel modules into gnoBoot? I would love to use paravir + xe-guest-utilities. As long as you are willing to test it and doesn't break iSCSI. I will enable that feature. Quote Link to comment Share on other sites More sharing options...
XPEH Posted February 26, 2014 Share #347 Posted February 26, 2014 Too bad, WOL support for your NIC is not good -> check here. Buy another NIC to satify your needs. The guy you refer to had problem with WOL in Windows. It works just fine with DSM on mine. Enabled WOL in BIOS and MAC address is matching with physical hardware. Options changed in the /etc/synoinfo.conf (not /etc.defaults/synoinfo.conf) Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 26, 2014 Author Share #348 Posted February 26, 2014 Too bad, WOL support for your NIC is not good -> check here. Buy another NIC to satify your needs. The guy you refer to had problem with WOL in Windows. It works just fine with DSM on mine. Enabled WOL in BIOS and MAC address is matching with physical hardware. Options changed in the /etc/synoinfo.conf (not /etc.defaults/synoinfo.conf) . I’m told that these do support WOL on Windows, but not if you’re running anything else. My bad, I read it from a wrong context. So it must be a user problem or I need to get the latest driver. I'll try to backport the latest 3.2.55 driver from kernel.org. Quote Link to comment Share on other sites More sharing options...
pzgz Posted February 26, 2014 Share #349 Posted February 26, 2014 The guy you refer to had problem with WOL in Windows. It works just fine with DSM on mine. Enabled WOL in BIOS and MAC address is matching with physical hardware. Options changed in the /etc/synoinfo.conf (not /etc.defaults/synoinfo.conf) My bad, I read it from a wrong context. So it must be a user problem or I need to get the latest driver. I'll try to backport the latest 3.2.55 driver from kernel.org. Yeah, WOL worked just fine in previous version, with the cracked solution. I also have changed the wol options in both /etc/synoinfo.conf and /etc.defaults/synoinfo.conf, and I can confirm the checkbox for WOL is enabled in DSM. But WOL is still not working. I am using the S99ZZZ_Shutdown.sh script solution now. And WOL is working fine, this can be a temp workaround for now. Quote Link to comment Share on other sites More sharing options...
EmmTeh Posted February 26, 2014 Share #350 Posted February 26, 2014 hey gno... how do I get mpt2sas working? I've got alpha8 up and running with 3x Dell H310s flashed to LSI 9211-8i IT Firmware but I don't have any disks detected other than onboard SATA. I've tried to insmod stuff but they're already loaded (mptsas, megaraid_sas, etc). I think I need mpt2sas but it's in not /lib/modules/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.