nemesis122

Hast du 1.03b von obenstehendem Link genommen? Advanced Media Extension MAC Adressen und Serienummer muss übereinstimmen des jeweiligen Models also in deinen Fall DS1621+ und im Loader unter edit config angepasst werden. sag es mal so Google ist dein freund Bitte teste mal die Performance von deinem system mit geekbench. Hier downloaden und ein share erstellen bps volume1 und das share heisst temp und das gz file dort hineinkopieren https://www.geekbench.com/download/linux/ danach mit putty connecten auf das NAS einloggen : switch to root sudo su - your password : cd /volume1/temp tar xvf Geekbench-5.5.1-Linux.tar.gz ls -lrt cd Geekbench-5.5.1-Linux ./geekbench5 warten bis duchgelaufen die URL öffnen und das Resultat posten dann das gleich nochmal aber vorher setzen wir noch einen Task im Taskscheduler hier der Command modprobe acpi-cpufreq && echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor Siehe Bild Im Anhang neustarten oder mit dem Command Run siehe Bild Danach nochmal geekbench starten und die beiden Resultate vergleichen

Nimm ARPL 1.03b Module und Addons nicht updaten Modell 3622xs Version 42962 alle Modules auswählen Build Loader Boot Loader https://github.com/nemesis122/arpl/releases/download/1.03/arpl-1.0-beta3.img.zip

There is a strange behavior Gen8 with i3 CPU all Models are working except 3617 ARPL 1.1 beta 2 Gen8 with Xeon 1240 v2 only the cpu is different ARPL 1.1 beta 2 and all ARPL bigger as 1.03 are not working udev failed all Models The same Loader / New Loader generated / all HDD are formated NOT working with 1.03b all systems working without any Problem when i update the Addons also the Loader ARPL 1.03 is stopping working Here is the Log Gen8 with 1240v2 cpu / 16GB RAM/ 4x3TB / 1xssd / 1x Intel 520sfp+ Dual Port one port used not working same Bios settings Gen8 with Intel I3 cpu / 16GB RAM/ 4x3TB / 1xssd / 1x Intel 520sfp+ Dual Port one port used this loaders works same Bios settings LOG ARPL 1.11beta 2 all HDD formated clean first boot.txt

Hi Peter How can i use Mshell without Friend --> Jot Mode ? thank you Michael

Yes i can confirm this is the best Loader so far working in any states do not forget to add the CPU Governor Command for full performance in the task scheduler and add with this the correct CPU Information and voila all is working perfect

TEST ARPL 1.0 beta 13 System HP gen8 Micorserver CPU i3 3240 16GB RAM 4x4tb HDD + 1xSSD 1xNetwork card Intel 520SFP+ Dual ARPL 1.0 beta 13 all modules+Addons updated these Modules are also not working when the modules + addons NOT updated Selected Addons : CPU Info + syno Codec Patch Selected Modules: ALL ( these Models which is not working is also not working when Moddules are not Selected DSM Version 42962 tested 920+ no HDD Detected 1621xs no HDD Detected 2422xs no HDD Detected 3615xs not working crash Soft Lookup [ 197.214775] Modules linked in: bromolow_synobios(PO) usbcore usb_common redpill(OF) 3617xs not working the same problem as 3615xs 3622xs working perfect in any case updated fresh install etc. DVA1622 no HDD Detected RS4021 working perfect in any case updated fresh install etc. pls note with ARPL 1.0 beta 11 these models 3617 3622 4021 was working perfect in any case other i have not tested there was only a cosmetic issue in the Info tab CPU clock speed Log 3615xs ARPL 1.0 beta 13 3615 DSM 42962 with modules and also without Modules not working [ 197.214775] Modules linked in: bromolow_synobios(PO) usbcore usb_common redpill(OF) [ 197.252858] CPU: 0 PID: 3732 Comm: scsi_id Tainted: PF O 3.10.108 #42962 [ 197.290032] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 197.324671] task: ffff8803f1d2c040 ti: ffff880407a34000 task.ti: ffff880407a34000 [ 197.362188] RIP: 0010:[<ffffffff814a935a>] [<ffffffff814a935a>] _raw_spin_lock+0x1a/0x30 [ 197.401579] RSP: 0018:ffff880407a37e28 EFLAGS: 00000297 [ 197.427001] RAX: 0000000000000001 RBX: ffffffff811384a0 RCX: 00007ffd44cebe30 [ 197.463436] RDX: 0000000000000002 RSI: 000000000000005d RDI: ffffffffa001f5a0 [ 197.500032] RBP: 000000000000005d R08: ffff8803f1585b00 R09: 0000000000002285 [ 197.536722] R10: fffffffffffff124 R11: 0000000000000202 R12: 0000000000000000 [ 197.573864] R13: ffffffff810fd663 R14: ffff880407a387f0 R15: 0000000000000000 [ 197.611334] FS: 00007f6b23582c00(0000) GS:ffff880409a00000(0000) knlGS:0000000000000000 [ 197.651974] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 197.679890] CR2: 00007f6b229802f0 CR3: 0000000407a38000 CR4: 00000000001607f0 [ 197.714605] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 197.748116] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 197.782039] Stack: [ 197.791468] ffffffffa00023b6 0000000000002285 ffff880407f6a000 00007ffd44cebe30 [ 197.826588] ffff8803f1585b00 ffffffff812690d7 ffffffff814ada08 ffff8803f1585b00 [ 197.861906] 0000000000000000 0000000063ddfab7 00000000ffffffe7 ffff8803f1de8180 [ 197.897461] Call Trace: [ 197.909248] [<ffffffffa00023b6>] ? sd_ioctl_canary+0x16/0x60 [redpill] [ 197.941117] [<ffffffff812690d7>] ? blkdev_ioctl+0x2d7/0x840 [ 197.968076] [<ffffffff814ada08>] ? __do_page_fault+0x1f8/0x500 [ 197.996495] [<ffffffff81161dd4>] ? block_ioctl+0x34/0x40 [ 198.022281] [<ffffffff8113c28d>] ? do_vfs_ioctl+0x76d/0x9b0 [ 198.048942] [<ffffffff8113c570>] ? SyS_ioctl+0xa0/0xb0 [ 198.073779] [<ffffffff814b1e7e>] ? system_call_fastpath+0x1c/0x21 [ 198.103371] Code: 75 f7 c3 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 b8 00 01 00 00 f0 66 0f c1 07 0f b6 d4 38 c2 74 10 0f 1f 80 00 00 00 00 f3 90 <0f> b6 07 38 d0 75 f7 c3 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00

@Peter Suh @fbelavenuto Testedt ARPL 1.13a actual Loader today updated all Addons and Modules before creating the Loader System: Gen8 Microserver I3 16GB RAM 4x3tb Raid 0 and 1x SSD Samsung SSD 1x Intel 520SFP+ Dual 10 gbe / 1 port connected SFP+ DSM Version 3622xs 42962 u3 Selected Modules: ALL Addons: CPU Info Codec Patch Update from other installed DSM Version --> Working perfect Reset all Data and doing a fresh install --> working perfect So do NOT change anything at this ixgbe Modul thank you for develop this Masterpiece of a Loader This Loader needs a Hall of Fame for Fabio both have a nice day see ya

Hi I have gen8 Micorserver with Intel 520sfp+ dual 10 Gbe and it is worked with ARPL1.11a PLS do not change anything at this Modul i will test with 1.13 and let you know ! Have a look this is for ARPL 1.11a https://github.com/fbelavenuto/arpl-modules/issues/94#issuecomment-1383136285 https://github.com/fbelavenuto/arpl-modules/issues/94#issuecomment-1383927398 https://github.com/fbelavenuto/arpl-modules/issues/94#issuecomment-1386554603

pls delete this post

pls note i have tested with Intel 520SFP+ 10Gbit networkcard Gen8 Microserver I3 CPU 2 cores 16Gb RAM not the orginal networkcard in the gen8 it is disabled could you test with ARPL 1.03b ? https://github.com/nemesis122/arpl/releases/download/1.03/arpl-1.0-beta3.img.zip Which Version do you have from the gen8 with Xeon ?

i can Confirm that ARPL v1.0-beta11a is now working pefect with the gen8 also the CPU Frequencies are fixed and the CPU Governor is not needed anymore. Please not for the Gen8 Microserver that the Performance Modus has set to OS Control Mode that CPU Freq is working correct. Here are the guide for the Bios setting for the Gen8 OS Controll Mode There is Small issue in the Info Page for the CPU Takt

hi both found some intressting things Test with V1.0 Beta 11a and with the gen8 it is working tested 3622xs and for full power you have to set in bios :the highest import setting are OS Control Mode for the performance Mode!!! this is only aI3 this is working without the CPU Governor Command https://browser.geekbench.com/v5/cpu/19897082 with OS Control Mode https://browser.geekbench.com/v5/cpu/19895998 with the wrong settings Power Management was at Performance a BAD RESULT F9 -> RBSU In RBSU: - System Options -> Serial Options -> Virtual Serial Port: Enabled -> Embedded NICs -> NIC 1 Boot Options: Disabled -> NUMLOCK Power-On State: On -> SATA Controller Options -> Embedded SATA Configuration: Enable SATA AHCI Support - Power Management Options -> HP Power Regulator: OS Control Mode -> Advanced Power Management Options -> Intel QPI Link Power Management: Enabled -> Minimum Processor Idle Power Core State: C6 State -> Minimum Processor Idle Power Package State: Package C6 (retention) State -> Maximum Memory Bus Frequency: Auto -> Memory Interleaving: Full Interleaving -> PCI-E Gen 3 Control (For Select Devices) -> PCI-E Slot 1: Enabled -> Maximum PCI Express Speed: Maximum Supported -> Dynamic Power Savings Mode Response: Fast -> Collaborative Power Control: Enabled -> DIMM Voltage Preference: Optimized for Performance - Date and Time: Datum und Uhrzeit korrekt einstellen - BIOS Serial Console & EMS -> BIOS Serial Console Port: Enabled - Advanced Options -> Advanced System ROM Options -> NMI Debug Button -> Disabled -> Virtual Install Disk -> Disabled -> Power-On Logo -> Enabled - System Default Options -> User Default Options -> Save User Defaults -> Yes, Save Beginn Installation OS

there is no different to the original ARPL 1.03b but i have saved for me and this loader works on the gen8 one word -->perfect in any case ! Only You need to set the CPU governor to performance for the full power feeling the idle consumption is the same but the power is double or tripled

pls delete

Do you have tested with tinycore and then postupdate with friend ( or Tinycore without friend option?? was i know this is not happen on all CPU but with the xeon in the gen8 microserver there is this issue. in ARPL this is fixed but as you know arpl bigger as 1.03 is not working in the gen8 also i dont know why. have a look at this tread starting here

no Sorry but i think he knows it @idaanx could you us help in this case ? thank you

Hi @pocopico Download Geekbench https://www.geekbench.com/download/linux/ copy the file to temp folder or your choice Login Putty as User and pass then switch to root sudo su - cd /volume1/temp tar xvf Geekbench-5.4.6-Linux.tar.gz ls -lrt cd Geekbench-5.4.6-Linux ./geekbench5 wait for the results and i could say this thing is only happen with arpl and with the friend options in tinycore / only with tinycore the server has full performance this is happen with all DSM Models only 3615 this has always the full perofrmance i dont know why you can test when you have low performation with the high freq. options with this command and test again there is hug differenc modprobe acpi-cpufreq && echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor

I need the loader.img file but i found already i have disabled the cleaning function

I read from en other user that spindown is not working with arpl 1.03 maybe it is working with mhsell from Peter or Tinycore from Pocopico check the Loader treath and ask the user with there experience. https://xpenology.com/forum/forum/31-loaders/ i have 4x Gen8 with 2x 1220Lv2 /1230 v2 / 1240 v2 2x with ARPL 1.03 / 1x with Pocopico tinycore without Friend /1x with 1.03b 3617 DSM 6.2 i will doing some test about this spindown and inform you

Hi I would replace with 1230 v2 / 1240 v2 i have turbo boost disabled and no problem with the cooling / or 1265Lv2 without any activ cooling working checked under Windows with AIDA Becnhmark http://www.lavalys.com/products/everest-pc-diagnostics/ more information below https://www.hardwareluxx.de/community/threads/hp-proliant-g8-g1610t-g2020t-i3-3240-e3-1220lv2-microserver.963207/ here are some benchmark be careful for me save is until 1240v2 without cooling Intel Core i3-3220T, 2x 2.80GHz, HT, TDP: 35W (BX80637I33220T) - Q ██████████████████ (3694) Intel Xeon E3-1220L, 2x 2.20GHz, Turbo: 3,4GHz, VT-d, AES-NI, HT, TDP: 20W (CM8062307262828) - Q ██████████████████▒▒▒ (3563 | 4200*) *approximiert Intel Xeon E3-1220L v2, 2x 2.30GHz, Turbo: 3,5GHz, VT-d, AES-NI, HT, TDP: 17W (CM8063701099001) - Q ██████████████████▓▓▓▓▓ (3656 | 4559) Intel Core i3-3250, 2x 3.50GHz, HT, TDP: 55W (BX80637I33250) - Q ███████████████████████ (4506) Intel Core i5-3470T, 2x 2.90GHz, Turbo: 3.60GHz, VT-d, AES-NI, HT, TDP: 35W (CM8063701159502) - Q ███████████████████████ (4530) Intel Xeon E3-1225, 4x 3,10GHz, Turbo: 3,4GHz, VT-d, AES-NI, TDP: 95W (BX80623E31225) - Q ██████████████████████████████ (5940) Intel Xeon E3-1260L, 4x 2,40GHz, Turbo: 3,3GHz, VT-d, AES-NI, HT, TDP: 45W (CM8062301061800) - Q █████████████████████████████████ (6534) Intel Xeon E3-1265L v2, 4x 2,50GHz, Turbo: 3,5GHz, VT-d, AES-NI, HT, TDP: 45W (BX80637E31265L2) - Q ██████████████████████████████████████▓▓▓▓ (7620 | 8406) Intel Xeon E3-1230 v2, 4x 3.30GHz, Turbo: 3,7GHz, VT-d, AES-NI, HT, TDP: 69W (BX80637E31230V2) - Q ████████████████████████████████████████████ (8849) Intel Xeon E3-1245 v2, 4x 3.40GHz, Turbo: 3,8GHz, VT-d, AES-NI, HT, TDP: 77W (BX80637E31245V2) - Q ██████████████████████████████████████████████ (9111) Intel Xeon E3-1240 v2, 4x 3.40GHz, Turbo: 3,8GHz, VT-d, AES-NI, HT, TDP: 69W (BX80637E31240V2) - Q ███████████████████████████████████████████████ (9266) Intel Xeon E3-1270 v2, 4x 3.50GHz, Turbo: 3,9GHz, VT-d, AES-NI, HT, TDP: 69W (BX80637E31270V2) - Q ████████████████████████████████████████████████ (9545) Intel Xeon E3-1280 v2, 4x 3.60GHz, Turbo: 4,0GHz, VT-d, AES-NI, HT, TDP: 69W (BX80637E31280V2) - Q █████████████████████████████████████████████████ (9751) weitere @homeservershow

no this is only cosmectic anyway have a look DSM 5.x/6.x/7.x CPU name & cores infomation Change tool - Software Modding - XPEnology Community

Hi Found my Result with E3 1220Lv2 https://browser.geekbench.com/v5/cpu/19832438 there is a different to your Geekbench test maybe check your bios settings like this see Attachement check that hyperthreading is enabled AHCI_E3-1220L_v2.txt

Hi All is running fine 42962 u3 only with tinycore (no Friend) but the loader.img is cleaned during the process i need to save this file. How can i do that? ty

for me in personal ARPL is the easiest way to install XPE and ARPL 1.03b is the last which is working for the gen8 in my experience form the arpl generation for me your result is not so bad pls note i have tested wit a xeon 1240v2 cpu in my gen8 this is not the orginal cpu it has much more power you can also test with Peters Mshell https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.3.0-1 here are other results with your cpu https://browser.geekbench.com/processors/intel-xeon-e3-1220l-v2 https://browser.geekbench.com/processors/intel-xeon-e3-1220l

How do you have startet this script in the task ....? I will test with my gen8 that has the original Xeon CPU the same as you