IG-88 Posted April 30, 2022 Share #51 Posted April 30, 2022 1 hour ago, neevdg said: Could you compile module for DS920+ 7.1.0-42661 update1 with pic id 0x3E96(xeon e-2126g coffee lake)?I will test it and report neither it works or not,Thanks! in this i listed all the supported id's by syno's driver and 3e96 is already supported with the default driver, if it does not work check for the firmware files mentioned above Quote Link to comment Share on other sites More sharing options...
blackmanga Posted May 1, 2022 Author Share #52 Posted May 1, 2022 (edited) 9 hours ago, IG-88 said: in this i listed all the supported id's by syno's driver and 3e96 is already supported with the default driver, if it does not work check for the firmware files mentioned above Agree, 3E96 should work out of the box with the syno drivers. Your dmesg output will tell you if you are missing firmware files. Download the file from the link I have provided in the earlier messages and it will work ———— 2) By default, the firmware files are not copied by the redpill loaders. So you can download them from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 and place them in/usr/lib/firmware/i915 the important ones are kbl_dmc_ver1_04.bin, kbl_guc_ver9_39.bin,kbl_huc_ver02_00_1810.bin (for the 10th gen). —— your dmesg will tell you which files it needs Edited May 1, 2022 by blackmanga Added download link Quote Link to comment Share on other sites More sharing options...
neevdg Posted May 1, 2022 Share #53 Posted May 1, 2022 (edited) 10 hours ago, blackmanga said: Agree, 3E96 should work out of the box with the syno drivers. Your dmesg output will tell you if you are missing firmware files. Download the file from the link I have provided in the earlier messages and it will work ———— 2) By default, the firmware files are not copied by the redpill loaders. So you can download them from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 and place them in/usr/lib/firmware/i915 the important ones are kbl_dmc_ver1_04.bin, kbl_guc_ver9_39.bin,kbl_huc_ver02_00_1810.bin (for the 10th gen). —— your dmesg will tell you which files it needs I have tried to insert 920 modules from your post ,it seemed that the modules not been load properly,i got nonthing output from dmesg log,but it's output the log that removed the modules.i even tried to insert the module one by one manually,but all the same,no log at all.(All firmwares has been uploaded to /usr/lib/firmware/i915). Edited May 1, 2022 by neevdg Quote Link to comment Share on other sites More sharing options...
blackmanga Posted May 1, 2022 Author Share #54 Posted May 1, 2022 (edited) Did you check if you have /dev/dri folder after the insert modules script ? while running the insert script, on another ssh window run tail -f /var/log/messages - that will give you some output re i915 being loaded since you don’t have any errors or messages in dmesg, I think you should be good and the modules would have loaded. Edited May 2, 2022 by blackmanga Added some more comments Quote Link to comment Share on other sites More sharing options...
neevdg Posted May 2, 2022 Share #55 Posted May 2, 2022 2 hours ago, blackmanga said: Did you check if you have /dev/dri folder after the insert modules script ? while running the insert script, on another ssh window run tail -f /var/log/messages - that will give you some output re i915 being loaded since you don’t have any errors or messages in dmesg, I think you should be good and the modules would have loaded. Quote Link to comment Share on other sites More sharing options...
blackmanga Posted May 2, 2022 Author Share #56 Posted May 2, 2022 I know it’s a stupid question, but have you enabled iGPU in the bios ? PMU command signature hex “44” ASCII “ D” might be the issue. Maybe some of the devs know what it means Quote Link to comment Share on other sites More sharing options...
neevdg Posted May 2, 2022 Share #57 Posted May 2, 2022 4 minutes ago, blackmanga said: I know it’s a stupid question, but have you enabled iGPU in the bios ? PMU command signature hex “44” ASCII “ D” might be the issue. Maybe some of the devs know what it means It's enabled in bios. Quote Link to comment Share on other sites More sharing options...
blackmanga Posted May 2, 2022 Author Share #58 Posted May 2, 2022 As IG-88 noted earlier, your PCI ID is already covered by regular syno drivers and doesn’t require my backported ones. Someone has tested my backported drivers for DS920 on a 10th gen CPU and they work. So it seems it’s not a driver issue, but something in the settings. can you do a (after you have inserted modules) lsmod | grep i915 and lspci -tvnnq Quote Link to comment Share on other sites More sharing options...
neevdg Posted May 2, 2022 Share #59 Posted May 2, 2022 (edited) 8 hours ago, blackmanga said: As IG-88 noted earlier, your PCI ID is already covered by regular syno drivers and doesn’t require my backported ones. Someone has tested my backported drivers for DS920 on a 10th gen CPU and they work. So it seems it’s not a driver issue, but something in the settings. can you do a (after you have inserted modules) lsmod | grep i915 and lspci -tvnnq I'm sorry ,its my problem .For some reason bios setting was loss,integrated graphics were turn off by default.I did't check it carefully.sorry again:@ Now there is dev/dri.Thanks for your help Edited May 2, 2022 by neevdg Quote Link to comment Share on other sites More sharing options...
blackmanga Posted May 2, 2022 Author Share #60 Posted May 2, 2022 cool ! i m glad its sorted out thank you for checking and testing Quote Link to comment Share on other sites More sharing options...
saber77 Posted May 4, 2022 Share #61 Posted May 4, 2022 Thanks for sharing!it works perfect!🤩 on 10105 + z490mitx+920+7.1.0-42661 Quote Link to comment Share on other sites More sharing options...
blackmanga Posted May 4, 2022 Author Share #62 Posted May 4, 2022 3 hours ago, saber77 said: Thanks for sharing!it works perfect!🤩 on 10105 + z490mitx+920+7.1.0-42661 awesome ! thank you for confirming. if i m not wrong, this didnt work with the older patched drivers either. it would be good to know if anyone has tested these on 9BC5 PCI ID as those had issues with patched drivers as well Quote Link to comment Share on other sites More sharing options...
maverickjp84 Posted May 14, 2022 Share #63 Posted May 14, 2022 Dear all i need help to install the dev/dri folder to enable hardware transcoding, i have build the system on a Jasper lake N5105 system, and i cant seem to find the correct driver for DS918 below are the system information and error i ran into any help is appreciated, i followed the instruction to download the i915 driver but i am not sure which one are Jasper lake, both rm and in modules.sh gives error and seems the graphic card is not detected Quote Link to comment Share on other sites More sharing options...
RedwinX Posted May 17, 2022 Share #64 Posted May 17, 2022 (edited) Hi, My processor (i3-10100) is dead... Need to buy another one... My guess is 11400 or 11600. Can you confirm that is 0x4C8A or 0x4C8B will be compatible (918+ or 920+) ? As I can see : root@frahqapp715:~# modinfo /root/redpill-tool-chain/images/i915.ko | grep 9BC8 alias: pci:v00008086d00009BC8sv*sd*bc03sc*i* root@frahqapp715:~# modinfo /root/redpill-tool-chain/images/i915.ko | grep 4C8A root@frahqapp715:~# modinfo /root/redpill-tool-chain/images/i915.ko | grep 4C8B I think it will be not compatible... Thx, Edited May 17, 2022 by RedwinX Quote Link to comment Share on other sites More sharing options...
blackmanga Posted May 18, 2022 Author Share #65 Posted May 18, 2022 14 hours ago, RedwinX said: Hi, My processor (i3-10100) is dead... Need to buy another one... My guess is 11400 or 11600. Can you confirm that is 0x4C8A or 0x4C8B will be compatible (918+ or 920+) ? As I can see : root@frahqapp715:~# modinfo /root/redpill-tool-chain/images/i915.ko | grep 9BC8 alias: pci:v00008086d00009BC8sv*sd*bc03sc*i* root@frahqapp715:~# modinfo /root/redpill-tool-chain/images/i915.ko | grep 4C8A root@frahqapp715:~# modinfo /root/redpill-tool-chain/images/i915.ko | grep 4C8B I think it will be not compatible... Thx, You are correct. 11th gen is not compatible at the moment. Quote Link to comment Share on other sites More sharing options...
RedwinX Posted May 18, 2022 Share #66 Posted May 18, 2022 10 hours ago, blackmanga said: You are correct. 11th gen is not compatible at the moment. And if we update the file (hex editor) and replace an unused id to 11th gen id, will it works? Quote Link to comment Share on other sites More sharing options...
RedwinX Posted May 18, 2022 Share #67 Posted May 18, 2022 59 minutes ago, RedwinX said: And if we update the file (hex editor) and replace an unused id to 11th gen id, will it works? Trying to build it, is possible to try for someone has a 11th gen ? i915-4C8A.ko Quote Link to comment Share on other sites More sharing options...
RedwinX Posted May 18, 2022 Share #68 Posted May 18, 2022 This is for every gen included 12th. If some people could test... https://synology.bs-it.fr/sharing/C4pNIOY7L Quote Link to comment Share on other sites More sharing options...
Tonylo1997 Posted May 18, 2022 Share #69 Posted May 18, 2022 not work with 12100, it said could not insert module i915.ko: unknow symbol in module. I think Linux kernel is not support 12th gen cpu Quote Link to comment Share on other sites More sharing options...
RedwinX Posted May 19, 2022 Share #70 Posted May 19, 2022 (edited) @IG-88@pocopico is there a solution to add a line like this? GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i915.force_probe=4c8a... Edited May 19, 2022 by RedwinX Quote Link to comment Share on other sites More sharing options...
RedwinX Posted May 19, 2022 Share #71 Posted May 19, 2022 16 hours ago, Tonylo1997 said: not work with 12100, it said could not insert module i915.ko: unknow symbol in module. I think Linux kernel is not support 12th gen cpu 920 or 918 ? Quote Link to comment Share on other sites More sharing options...
Tonylo1997 Posted May 19, 2022 Share #72 Posted May 19, 2022 5 minutes ago, RedwinX said: 920 or 918 ? 920 7.1-42661u1 Quote Link to comment Share on other sites More sharing options...
RedwinX Posted May 19, 2022 Share #73 Posted May 19, 2022 2 minutes ago, Tonylo1997 said: 920 7.1-42661u1 My module is compatible only with 918+ for now... Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 19, 2022 Share #74 Posted May 19, 2022 11 hours ago, RedwinX said: "quiet splash i915.force_probe=4c8a... wouldn't that be just added to the grub.cfg to the kernel parameters in the same way as vid/pid? On 5/18/2022 at 5:04 PM, RedwinX said: This is for every gen included 12th. If some people could test... any description of what you did, source or patch? 12th gen Alder Lake would be Intel Xe as GPU ... Quote Link to comment Share on other sites More sharing options...
RedwinX Posted May 20, 2022 Share #75 Posted May 20, 2022 10 hours ago, IG-88 said: wouldn't that be just added to the grub.cfg to the kernel parameters in the same way as vid/pid? any description of what you did, source or patch? 12th gen Alder Lake would be Intel Xe as GPU ... Yeah, but the older driver works for, if you add the device id (pci id) into the driver. Maybe not optimal without all functionnality, but could be working. It's a friend, it can compile the driver and apparently should works. I will receive my CPU today, I will test ASAP Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.