alexsahka Posted May 12, 2022 Share #176 Posted May 12, 2022 On 3/22/2022 at 6:58 AM, RedwinX said: I can confirm that AI analytics works with a P2000... Didn't have any other graphic card to test, but P2000 works flawlessly... Could you share exact Model etc about your P2000 video card I need to buy one Quote Link to comment Share on other sites More sharing options...
franky52 Posted May 13, 2022 Share #177 Posted May 13, 2022 Cormifed! V9fs is working great for the network card. Thanks again! Quote Link to comment Share on other sites More sharing options...
-iliya- Posted May 13, 2022 Share #178 Posted May 13, 2022 В 30.03.2022 в 08:48, pocopico сказал: Fix the acpi systemd issue otherwise DSM will shutdown on access I apologize for the offtopic, I encountered a similar problem of immediate shutdown when starting installed 3617 and 3622 on Z87X-D3H i7-4771 24Gb DVA3221 installed and started without problems. В 30.03.2022 в 08:48, pocopico сказал: ./rploader.sh mountdsmroot now sed -i 's/^acpi-cpufreq/# acpi-cpufreq/g' /mnt/dsmroot/usr/lib/modules-load.d/70-cpufreq-kernel.conf && cat /mnt/dsmroot/usr/lib/modules-load.d/70-cpufreq-kernel.conf Will these steps help launch 3617 or 3622? Quote Link to comment Share on other sites More sharing options...
-iliya- Posted May 13, 2022 Share #179 Posted May 13, 2022 В 23.03.2022 в 16:12, PaulEvo сказал: Here we go with the steps voor having DVA (AI) in a DVA3221 with a lower performance video card like a GTX1050 1) I assume you have a well functioning SS in DVA3221 7.0.1 2? Download SurveillanceStation-x86_64-8.2.9-6459_DVA_3219.spk (the 2019 version of DVA, this file is unencrypted) 3) Extract package.tgz from it 4) Extract all the files from the package file which you got in step 3 5) Find the folder and files in it \package\dvacore\etc\model 6) Stop the SS service on your DVA3221 7) Connect with your DVA3221 with WinSCP and go to /volume1/@appstore/SurveillanceStation/dvacore/etc/model 8.) Rename the directory /model to something else 9) Copy the folder and subs which you found in step 5 to it 10) Change ownership and group (recursive) to the 'model' folder and it's contents to 'SurveillanceStation' 11) Start the SS service 12) Create a task in SS in Deep Video Analytics 13) Do some experiments with it and enjoy your tests with AI and the amazing work in all the 'loader' activities i try to this guide and 1080Ti is works! face detected Quote Link to comment Share on other sites More sharing options...
-iliya- Posted May 14, 2022 Share #180 Posted May 14, 2022 16 часов назад, -iliya- сказал: i try to this guide and 1080Ti is works! after works about 30-40min GPU warmed up quite a lot - about 65-75С Quote Link to comment Share on other sites More sharing options...
alexsahka Posted May 17, 2022 Share #181 Posted May 17, 2022 On 5/11/2022 at 4:14 AM, pocopico said: Did you follow @haydibe instructions for creating the VM ? The loader disk has to be on USB and the USB boot option has to be selected at GRUB. Please see his signature for details. Could you point to the instruction? I can't find it, as well as I can not see @haydibe signature. Maybe I am blind, sorry for this. Quote Link to comment Share on other sites More sharing options...
franky52 Posted May 17, 2022 Share #182 Posted May 17, 2022 (edited) 2 hours ago, alexsahka said: Could you point to the instruction? I can't find it, as well as I can not see @haydibe signature. Maybe I am blind, sorry for this. Follow @erazor1112 instructions and select usb boot after creating the boot loader. Edit: For the 1st disk, select USB instead of SATA . Edited May 17, 2022 by franky52 Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 17, 2022 Share #183 Posted May 17, 2022 3 hours ago, alexsahka said: Could you point to the instruction? I can't find it, as well as I can not see @haydibe signature. Maybe I am blind, sorry for this. Oh, you have to enable that in your profile, otherwise you will not see the signatures I had that issue myself. I don’t know why it’s not by default enabled Quote Link to comment Share on other sites More sharing options...
alexsahka Posted May 18, 2022 Share #184 Posted May 18, 2022 2 hours ago, pocopico said: Oh, you have to enable that in your profile, otherwise you will not see the signatures I had that issue myself. I don’t know why it’s not by default enabled Thank you, you opened my eyes 🤣! Quote Link to comment Share on other sites More sharing options...
phone guy Posted May 18, 2022 Share #185 Posted May 18, 2022 (edited) @alexsahka For the record, I have written a Guided tutorial for creating a TCRP Red Pill loader in proxmox, complete with step by step direction and even pictures to follow along with. It will work for any of the platforms (afaik). You can pass thru pci cards like gpu, hba, nic, etc. Edited May 18, 2022 by phone guy 1 Quote Link to comment Share on other sites More sharing options...
bluecatus Posted May 18, 2022 Share #186 Posted May 18, 2022 I hope you could write a guide for ESXI ith step by step pictures. Thank you so much. Quote Link to comment Share on other sites More sharing options...
alexsahka Posted May 18, 2022 Share #187 Posted May 18, 2022 (edited) 3 hours ago, phone guy said: @alexsahka For the record, I have written a Guided tutorial for creating a TCRP Red Pill loader in proxmox, complete with step by step direction and even pictures to follow along with. It will work for any of the platforms (afaik). You can pass thru pci cards like gpu, hba, nic, etc. Thank you, do you remember seeing the DVA3221 ESXI guide? I've tried https://www.tsunati.com/blog/xpenology-7-0-1-on-esxi-7-x everything works, but when I trying to install the DVA3221 sudo su ./rploader.sh update now ./rploader.sh serialgen DVA3221 ./rploader.sh satamap denverton-7.0.1-42218 ./rploader.sh backup now ./rploader.sh build denverton-7.0.1-42218 auto optional: ./rploader.sh ext denverton-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/v9fs/rpext-index.json ./rploader.sh build denverton-7.0.1-42218 manual nothing loading. Edited May 18, 2022 by alexsahka Quote Link to comment Share on other sites More sharing options...
phone guy Posted May 19, 2022 Share #188 Posted May 19, 2022 23 hours ago, bluecatus said: I hope you could write a guide for ESXI ith step by step pictures. Thank you so much. 21 hours ago, alexsahka said: Thank you, do you remember seeing the DVA3221 ESXI guide? I've tried https://www.tsunati.com/blog/xpenology-7-0-1-on-esxi-7-x everything works, but when I trying to install the DVA3221 sudo su ./rploader.sh update now ./rploader.sh serialgen DVA3221 ./rploader.sh satamap denverton-7.0.1-42218 ./rploader.sh backup now ./rploader.sh build denverton-7.0.1-42218 auto optional: ./rploader.sh ext denverton-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/v9fs/rpext-index.json ./rploader.sh build denverton-7.0.1-42218 manual nothing loading. Since I do not run ESXi I am afraid I can not help, I personally am using Proxmox. I know to get the DVA working you will need a graphics card, I am not sure it boots up without a graphics card? Quote Link to comment Share on other sites More sharing options...
bluecatus Posted May 19, 2022 Share #189 Posted May 19, 2022 35 minutes ago, phone guy said: Since I do not run ESXi I am afraid I can not help, I personally am using Proxmox. I know to get the DVA working you will need a graphics card, I am not sure it boots up without a graphics card? Thank you so much. I successfully installed DVA3221 of DSM 7.0.1 yesterday on ESXi without a graphic card. Quote Link to comment Share on other sites More sharing options...
phone guy Posted May 19, 2022 Share #190 Posted May 19, 2022 21 hours ago, alexsahka said: Thank you, do you remember seeing the DVA3221 ESXI guide? I've tried https://www.tsunati.com/blog/xpenology-7-0-1-on-esxi-7-x everything works, but when I trying to install the DVA3221 sudo su ./rploader.sh update now ./rploader.sh serialgen DVA3221 ./rploader.sh satamap denverton-7.0.1-42218 ./rploader.sh backup now ./rploader.sh build denverton-7.0.1-42218 auto optional: ./rploader.sh ext denverton-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/v9fs/rpext-index.json ./rploader.sh build denverton-7.0.1-42218 manual nothing loading. I think you missed ./rploader.sh fullupgrade now Make sure you clean now, update now, fullupgrade now, add ext for your nic, then build. Quote Link to comment Share on other sites More sharing options...
phone guy Posted May 19, 2022 Share #191 Posted May 19, 2022 1 minute ago, bluecatus said: Thank you so much. I successfully installed DVA3221 of DSM 7.0.1 yesterday on ESXi without a graphic card. Glad to hear that, You should post your method and results with any commands for us all so we can duplicate your success! Quote Link to comment Share on other sites More sharing options...
alexsahka Posted May 19, 2022 Share #192 Posted May 19, 2022 (edited) 7 minutes ago, phone guy said: I think you missed ./rploader.sh fullupgrade now Make sure you clean now, update now, fullupgrade now, add ext for your nic, then build. The DVA3221 started and running 7.1.0-42661 Update 1 now (the pastry GTX1650 not showing in the Synology for some reason ) I find error and manually uploaded DSM_DVA3221_42218.pat before /rploader.sh build denverton-7.0.1-42218 to home folder. Going to try one more time, to post all my steps later Edited May 19, 2022 by alexsahka Quote Link to comment Share on other sites More sharing options...
bluecatus Posted May 19, 2022 Share #193 Posted May 19, 2022 (edited) 8 minutes ago, phone guy said: Glad to hear that, You should post your method and results with any commands for us all so we can duplicate your success! Oh, I've just followed this thread: Edited May 19, 2022 by bluecatus Quote Link to comment Share on other sites More sharing options...
alexsahka Posted May 19, 2022 Share #194 Posted May 19, 2022 2 minutes ago, bluecatus said: Oh, I've just followed this thread: Shure, just need one more time to install and find out why the GTX1650 not showing up in the Synology. Quote Link to comment Share on other sites More sharing options...
phone guy Posted May 19, 2022 Share #195 Posted May 19, 2022 @pocopico@Orphée@Peter Suh I have a couple quick questions about building DVA3221 in Proxmox I am assuming performing the update now and fullupgrade now will update all needed modules and scripts to build this platform <DVA3221> And adding the v9fs ext should work as drivers for the paravirtualized drivers. like it does in my other build of DS3622xs+ So from a fresh start and using tinycore-redpill.v0.4.6.img here is what I tried, but I can not access or find the running DSM. Not with find.synology.com or synology assistant app for windows either. And I do not see anything the console serial 0 port either? Just starting kernel... message. Power on vm. Boot to TCRP. Get ip from ifconfig Putty -> ssh in to tcrp and then I enter these commands to build loader. ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DVA3221 ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext denverton-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/v9fs/rpext-index.json This above ext should add whats needed to access using NIC port, again has worked for me not sure its DVA3221 ready? These below are my usual ext added for DS3622 so I #commented them out as this is only a test. Spoiler #./rploader.sh ext denverton-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json #./rploader.sh ext denverton-7.1.0-42661 add https://raw.githubusercontent.com/dodo-dk/rp-ext/main/acpid/rpext-index.json # ./rploader.sh ext denverton-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-virtio/rpext-index.json Then finally issue the build command ./rploader.sh build denverton-7.1.0-42661 Loader builds, on restart I open serial >_consoe_0 to watch the booting process, switch to usb boot, but I dont see anything? I wait a few minutes, and can never find or see the vm. Maybe I used wrong nic port drivers? or have I missed a step? I saw some information about adding and changing custom_modules.json, but I thought @pocopico fixed all that? and performing the updates and upgrades fixed anything missing. Advice? Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 19, 2022 Share #196 Posted May 19, 2022 1 hour ago, phone guy said: @pocopico@Orphée@Peter Suh I have a couple quick questions about building DVA3221 in Proxmox I am assuming performing the update now and fullupgrade now will update all needed modules and scripts to build this platform <DVA3221> And adding the v9fs ext should work as drivers for the paravirtualized drivers. like it does in my other build of DS3622xs+ So from a fresh start and using tinycore-redpill.v0.4.6.img here is what I tried, but I can not access or find the running DSM. Not with find.synology.com or synology assistant app for windows either. And I do not see anything the console serial 0 port either? Just starting kernel... message. Power on vm. Boot to TCRP. Get ip from ifconfig Putty -> ssh in to tcrp and then I enter these commands to build loader. ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DVA3221 ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext denverton-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/v9fs/rpext-index.json This above ext should add whats needed to access using NIC port, again has worked for me not sure its DVA3221 ready? These below are my usual ext added for DS3622 so I #commented them out as this is only a test. extra commands I use when building DS3622, not used on DVA3221 (Reveal hidden contents) #./rploader.sh ext denverton-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json #./rploader.sh ext denverton-7.1.0-42661 add https://raw.githubusercontent.com/dodo-dk/rp-ext/main/acpid/rpext-index.json # ./rploader.sh ext denverton-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-virtio/rpext-index.json Then finally issue the build command ./rploader.sh build denverton-7.1.0-42661 Loader builds, on restart I open serial >_consoe_0 to watch the booting process, switch to usb boot, but I dont see anything? I wait a few minutes, and can never find or see the vm. Maybe I used wrong nic port drivers? or have I missed a step? I saw some information about adding and changing custom_modules.json, but I thought @pocopico fixed all that? and performing the updates and upgrades fixed anything missing. Advice? What is the CPU you used ? some cpu options are known to cause KP Quote Link to comment Share on other sites More sharing options...
phone guy Posted May 19, 2022 Share #197 Posted May 19, 2022 33 minutes ago, pocopico said: What is the CPU you used ? some cpu options are known to cause KP Its in a proxmox vm, but the chip is xeon E3-1270 v2 which has run ds918 and ds3622. Not having much luck with the dva3221 Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 19, 2022 Share #198 Posted May 19, 2022 (edited) 5 minutes ago, phone guy said: Its in a proxmox vm, but the chip is xeon E3-1270 v2 which has run ds918 and ds3622. Not having much luck with the dva3221 Actually i was talking more about the machine emulation. The problem with the DVA is that you cannot have a serial console. After kernel boots its moving all messages away from tty and this makes it harder to troubleshoot. Did you use virtio_net for network ? Edited May 19, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
phone guy Posted May 19, 2022 Share #199 Posted May 19, 2022 1 minute ago, pocopico said: Actually i was talking more about the machine emulation. The problem with the DVA is that you cannot have a serial console. After kernel boots its moving all messages away from tty and this makes it harder to troubleshoot. I can try again with the i440x, I think thats the other cpu type Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 19, 2022 Share #200 Posted May 19, 2022 Just now, phone guy said: I can try again with the i440x, I think thats the other cpu type I think that q35 should be fine. Right after GRUB you get some kernel messages. Its only after some time that it switches to something else (GPU ?) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.