Aigor Posted February 14, 2022 Share #26 Posted February 14, 2022 59 minutes ago, pocopico said: Yes, i've noticed the same on VM installation. Now as for the boot time module loading .. you will have to recreate the loader and add the extension i've sent you earlier. i'm afraid i'm not able to reacreate loader with your extension Quote Link to comment Share on other sites More sharing options...
pocopico Posted February 14, 2022 Share #27 Posted February 14, 2022 (edited) 37 minutes ago, Aigor said: i'm afraid i'm not able to reacreate loader with your extension can you check again ? I fixed a typo and I was able to create and boot the created image and the tg3 module has been loaded succesfully. Edited February 14, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
IG-88 Posted February 14, 2022 Share #28 Posted February 14, 2022 2 hours ago, Aigor said: I'm compiling tg3 from source, compilation goes well with last toolchain, but, when transfer tg3.ko into gen8 with dsm7 ds3622+ and try to load, i get this error kernel: [ 3067.102139] tg3: version magic '4.4.180 SMP mod_unload ' should be '4.4.180+ SMP mod_unload kernel source are 4.4.180 you need to change the "Makefile" in the Kernel source and add a "+" in EXTRAVERSION (at least thats what i do and documented it in the thread about building drivers and modding extra.lzma) https://xpenology.com/forum/topic/7187-how-to-build-and-inject-missing-drivers-in-jun-loader-102a/?do=findComment&comment=122631 looks like this in my new 918+ 7.0 build environment VERSION = 4 PATCHLEVEL = 4 SUBLEVEL = 180 EXTRAVERSION =+ NAME = Blurry Fish Butt Quote Link to comment Share on other sites More sharing options...
Aigor Posted February 14, 2022 Share #29 Posted February 14, 2022 Just now, IG-88 said: you need to change the "Makefile" in the Kernel source and add a "+" in EXTRAVERSION (at least thats what i do and documented it in the thread about building drivers and modding extra.lzma) https://xpenology.com/forum/topic/7187-how-to-build-and-inject-missing-drivers-in-jun-loader-102a/?do=findComment&comment=122631 looks like this in my new 918+ 7.0 build environment VERSION = 4 PATCHLEVEL = 4 SUBLEVEL = 180 EXTRAVERSION =+ NAME = Blurry Fish Butt It doesn't work there is a blank that denie loading modules Quote Link to comment Share on other sites More sharing options...
IG-88 Posted February 14, 2022 Share #30 Posted February 14, 2022 10 minutes ago, Aigor said: It doesn't work there is a blank that denie loading modules the new 918+ modules i had build a few days ago for 7.0 don't have a blank between "180" and the "+" worked for years that way and does on the new setup system look closer on your config Quote Link to comment Share on other sites More sharing options...
yanjun Posted February 14, 2022 Author Share #31 Posted February 14, 2022 16 minutes ago, Aigor said: It doesn't work there is a blank that denie loading modules While it's critical for you to understand your problem, at this stage I hope we'll make the normal startup of this loader perfect first. I would prefer that we discuss the issue of circular unloading of the ixgbe module. Quote Link to comment Share on other sites More sharing options...
Aigor Posted February 14, 2022 Share #32 Posted February 14, 2022 (edited) 47 minutes ago, yanjun said: While it's critical for you to understand your problem, at this stage I hope we'll make the normal startup of this loader perfect first. I would prefer that we discuss the issue of circular unloading of the ixgbe module. Now i'm booting without 10Gb card, but with tg3 driver, it took time to finish boot. I'm able to install DSM7 into DS3622xs+ without 10Gbit card, but, as i said, it took time. Edited February 14, 2022 by Aigor Quote Link to comment Share on other sites More sharing options...
Aigor Posted February 14, 2022 Share #33 Posted February 14, 2022 (edited) Recap I'v made loader with tg3 extension from pocopico github, made micro-sdcard with correct VID and PID for internal card reader of Gen8, no 10Gbit card installed 1) First try, no success, with internet enable first part of installation goes weel, but after rebooting system become migrable in loop 2) Clean disk, redo installation without internet and without 10Gbit card, goes weel, i was able to install DSM7 new on bare metal. If you leave second interface in dhcp mode, it took time to finish boot when you configure system put both interface with fixed ip address. EDIT: i had a spare Qlogic FC card and is recognized by the system, you need to download correct firmware for your card, copy into /lib/firmware and that's it [ 206.847501] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k. [ 206.898743] iSCSI:qla_dbg.c:2660:ql_log_pci qla2xxx [0000:07:00.0]-001d: : Found an ISP2432 irq 16 iobase 0xffffc90005938000. [ 207.272792] scsi host7: qla2xxx [ 207.288447] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:07:00.0]-00fb:7: QLogic QLE2460 - SG-(X)PCIE1FC-QF4, Sun StorageTek 4 Gb FC Enterprise PCI-Express Single Channel. [ 207.360483] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:07:00.0]-00fc:7: ISP2432: PCIe (2.5GT/s x4) @ 0000:07:00.0 hdma+ host#=7 fw=7.03.00 (9496). [ 209.323393] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:07:00.0]-00af:7: Performing ISP error recovery - ha=ffff8800ac330000. [ 214.787772] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:07:00.0]-8038:7: Cable is unplugged... As i said, without 10Gbit card, i took time to finish boot but it works. @pocopico what about to add DS3622xs+ into tnycore? Hope it helps Edited February 14, 2022 by Aigor Qlogic card Quote Link to comment Share on other sites More sharing options...
pocopico Posted February 14, 2022 Share #34 Posted February 14, 2022 3 hours ago, Aigor said: @pocopico what about to add DS3622xs+ into tnycore? Almost there. I need a bit of time for the extensions. The load/unload loop is being taken care off also. 3 Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 15, 2022 Share #35 Posted February 15, 2022 Hi, Do you know if DS3622xs+ is compiled with FMA3 instructions ? as it is currently the culprit for DS918+ on CPU lower than haswell... It would be a good news if we can run DS3622xs+ on HP N54L or HP Gen8. Quote Link to comment Share on other sites More sharing options...
altas Posted February 15, 2022 Share #36 Posted February 15, 2022 Hi, as DS3617xs has some troubles with baremetal i would be happy if we could use DS3622XS in tnycore soon thx @pocopico for all the work and @yanjun Quote Link to comment Share on other sites More sharing options...
neonflx Posted February 15, 2022 Share #37 Posted February 15, 2022 I was able to install on Supermicro X10SDV-6C+-TLN4F with a Xeon D-1531 onboard 10gb nic working at full speed, My issue is that I'm only able to recognize the hard drives attached to the onboard SATA ports 8 hard drives connected to the a LSI 9211-8i are not been recognized I had this machine working with a 3615 RP build all drives recognized Any suggestions??? Quote Link to comment Share on other sites More sharing options...
Aigor Posted February 15, 2022 Share #38 Posted February 15, 2022 (edited) 24 minutes ago, neonflx said: I was able to install on Supermicro X10SDV-6C+-TLN4F with a Xeon D-1531 onboard 10gb nic working at full speed, My issue is that I'm only able to recognize the hard drives attached to the onboard SATA ports 8 hard drives connected to the a LSI 9211-8i are not been recognized I had this machine working with a 3615 RP build all drives recognized Any suggestions??? Maybe mpt3sas module is not presente into system, you have to add mpt3sas extension to loader Edited February 15, 2022 by Aigor Quote Link to comment Share on other sites More sharing options...
neonflx Posted February 15, 2022 Share #39 Posted February 15, 2022 5 minutes ago, Aigor said: Maybe mpt3sas module is not presente into system, you have to add mpt3sas extension to loader How can I accomplish this?? Quote Link to comment Share on other sites More sharing options...
pocopico Posted February 15, 2022 Share #40 Posted February 15, 2022 17 hours ago, pocopico said: Almost there. I need a bit of time for the extensions. The load/unload loop is being taken care off also. I think i've got the extensions ready for DS3622 ... 1 Quote Link to comment Share on other sites More sharing options...
altas Posted February 15, 2022 Share #41 Posted February 15, 2022 Can you add it to tynloader?? Quote Link to comment Share on other sites More sharing options...
pocopico Posted February 15, 2022 Share #42 Posted February 15, 2022 4 minutes ago, altas said: Can you add it to tynloader?? Yes, i've updated rploader and i have tested a successful creation. You can test as well and let me know 2 Quote Link to comment Share on other sites More sharing options...
altas Posted February 15, 2022 Share #43 Posted February 15, 2022 Sure, when the kids sleeping Quote Link to comment Share on other sites More sharing options...
neonflx Posted February 15, 2022 Share #44 Posted February 15, 2022 16 minutes ago, pocopico said: Yes, i've updated rploader and i have tested a successful creation. You can test as well and let me know Does it have the mpt3sas drivers? Thanks Quote Link to comment Share on other sites More sharing options...
yanjun Posted February 15, 2022 Author Share #45 Posted February 15, 2022 Update time: 1. The issue about infinite restart of ixgbe module has been fixed. 2. Regarding the incompatibility of hard disks, most of the hard disks on sale have been added. For a detailed list, you can view ds3622xs+_host_v7.db in /var/lib/disk-compatibility after the installation is complete 3. The problem that the network needs to be disconnected when the system is installed for the first time has also been fixed Problems still exist: 1. The ixgbe.ko driver integrated in the loader cannot be used normally, which means that if there is an intel 10 Gigabit network card in the hardware, in my case it is X550-T2, the kernel will crash. 2. Loading the mpt3sas.ko driver will cause a kernel panic. Quote Link to comment Share on other sites More sharing options...
neonflx Posted February 15, 2022 Share #46 Posted February 15, 2022 with the newest tinycore I'm getting boot loops, with the one previous I did not and was able to install Quote Link to comment Share on other sites More sharing options...
pocopico Posted February 15, 2022 Share #47 Posted February 15, 2022 26 minutes ago, neonflx said: with the newest tinycore I'm getting boot loops, with the one previous I did not and was able to install What do you mean ? Do you have any serial console output ? Quote Link to comment Share on other sites More sharing options...
neonflx Posted February 15, 2022 Share #48 Posted February 15, 2022 Just now, pocopico said: What do you mean ? Do you have any serial console output ? with the older version before the one uploaded about an hr ago, I was able to boot,install and run DSM7 3622, recognized my 10gb nic and it worked, as well as recognized 6 cores with the latest version, I keep getting loop boots immediately after it loads the kernel how do i get serial output? Quote Link to comment Share on other sites More sharing options...
pocopico Posted February 15, 2022 Share #49 Posted February 15, 2022 1 minute ago, neonflx said: with the older version before the one uploaded about an hr ago, I was able to boot,install and run DSM7 3622, recognized my 10gb nic and it worked, as well as recognized 6 cores with the latest version, I keep getting loop boots immediately after it loads the kernel how do i get serial output? So you recreated the loader using the latest tinycore and/or the latest Yanjun modifications ? You will have to update the custom_config.json to point to dogodefi Quote Link to comment Share on other sites More sharing options...
Aigor Posted February 15, 2022 Share #50 Posted February 15, 2022 Bad news ------------[ cut here ]------------ [ 96.839227] WARNING: CPU: 0 PID: 429 at /opt/redpill-lkm/shim/bios/bios_hwcap_shim.c:59 GetHwCapability_shim+0x20a/0x220 [redpill]() [ 96.895850] BUG log triggered [ 96.909060] Modules linked in: tg3(OE) libphy(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O+) redpill(OE) [last unloaded: broadwellnk_synobios] [ 96.985868] CPU: 0 PID: 429 Comm: kworker/0:1 Tainted: P D OE 4.4.180+ #42218 [ 97.025278] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 97.059070] Workqueue: usb_hub_wq hub_event [usbcore] [ 97.083282] 0000000000000000 ffff8800a9123a48 ffffffff812dc58b 0000000000000009 [ 97.119131] ffff8800a9123a90 ffff8800a9123a80 ffffffff81051f9e ffff8800a9123b80 [ 97.153965] 00000000ffffffff 0000000000000000 0000000000000001 ffffffffa0238430 [ 97.188978] Call Trace: [ 97.200827] [<ffffffff812dc58b>] dump_stack+0x4d/0x72 [ 97.225876] [<ffffffff81051f9e>] warn_slowpath_common+0x7e/0xb0 [ 97.254411] [<ffffffff81052017>] warn_slowpath_fmt+0x47/0x50 [ 97.281701] [<ffffffffa000b3fa>] GetHwCapability_shim+0x20a/0x220 [redpill] [ 97.315953] [<ffffffffa000b2c5>] GetHwCapability_shim+0xd5/0x220 [redpill] [ 97.349422] [<ffffffffa00ce93b>] usb_uevent+0xdb/0x130 [usbcore] [ 97.379350] [<ffffffff8139e0e3>] dev_uevent+0x143/0x2c0 [ 97.404780] [<ffffffff812df711>] kobject_uevent_env+0x1d1/0x4f0 [ 97.433193] [<ffffffff8106ff17>] ? notifier_call_chain+0x47/0x70 [ 97.461943] [<ffffffff812dfa3b>] kobject_uevent+0xb/0x10 [ 97.487349] [<ffffffff8139c5c8>] device_del+0x178/0x270 [ 97.512362] [<ffffffffa00cc887>] ? remove_intf_ep_devs+0x37/0x50 [usbcore] [ 97.545563] [<ffffffffa00cd042>] usb_disable_device+0x82/0x1d0 [usbcore] [ 97.577795] [<ffffffffa00c3cd8>] usb_disconnect+0x98/0x270 [usbcore] [ 97.608285] [<ffffffffa00c5df8>] hub_event+0x878/0x14e0 [usbcore] [ 97.637444] [<ffffffff81072dda>] worker_run_work+0x9a/0xe0 [ 97.664024] [<ffffffffa00c5580>] ? hub_port_debounce+0xd0/0xd0 [usbcore] [ 97.696027] [<ffffffff8106a76b>] process_one_work+0x1db/0x4e0 [ 97.723539] [<ffffffff8106aa9d>] worker_thread+0x2d/0x4a0 [ 97.749437] [<ffffffff8106aa70>] ? process_one_work+0x4e0/0x4e0 [ 97.777838] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 97.800802] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 97.829911] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 97.855309] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 97.884034] ---[ end trace 8f867192589ecfd0 ]--- [ 97.905931] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 [ 97.942660] IP: [<ffffffffa0001327>] __enable_symbol_override+0x7/0x120 [redpill] [ 97.978013] PGD 0 [ 97.987463] Oops: 0000 [#2] SMP [ 98.002725] Modules linked in: tg3(OE) libphy(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O+) redpill(OE) [last unloaded: broadwellnk_synobios] [ 98.078196] CPU: 0 PID: 429 Comm: kworker/0:1 Tainted: P D W OE 4.4.180+ #42218 [ 98.116095] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 98.149350] Workqueue: usb_hub_wq hub_event [usbcore] [ 98.173146] task: ffff880432efb300 ti: ffff8800a9120000 task.ti: ffff8800a9120000 [ 98.208507] RIP: 0010:[<ffffffffa0001327>] [<ffffffffa0001327>] __enable_symbol_override+0x7/0x120 [redpill] [ 98.255338] RSP: 0018:ffff8800a9123b18 EFLAGS: 00010202 [ 98.280337] RAX: 00000000fffffffb RBX: ffff8800a9123b80 RCX: 00000000000008b7 [ 98.313860] RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000000 [ 98.348545] RBP: ffff8800a9123b28 R08: 000000000000000a R09: 00000000000008b7 [ 98.382184] R10: 0000000000000060 R11: ffffffff81a0562d R12: 00000000fffffffb [ 98.415979] R13: 0000000000000000 R14: 0000000000000001 R15: ffffffffa0238430 [ 98.449673] FS: 0000000000000000(0000) GS:ffff880445600000(0000) knlGS:0000000000000000 [ 98.487791] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.514783] CR2: 0000000000000038 CR3: 000000000180a000 CR4: 00000000000606f0 [ 98.548433] Stack: [ 98.558014] ffff8800a9123b80 00000000fffffffb ffff8800a9123b70 ffffffffa000b2d9 [ 98.592819] ffff8800a9123ba0 0000000000000000 ffff8800ad230000 0000000000000000 [ 98.627859] ffff8804308ec000 ffff88042b650430 ffff88043382dd20 ffff8800a9123ba0 [ 98.662837] Call Trace: [ 98.674414] [<ffffffffa000b2d9>] GetHwCapability_shim+0xe9/0x220 [redpill] [ 98.707465] [<ffffffffa00ce93b>] usb_uevent+0xdb/0x130 [usbcore] [ 98.736280] [<ffffffff8139e0e3>] dev_uevent+0x143/0x2c0 [ 98.761357] [<ffffffff812df711>] kobject_uevent_env+0x1d1/0x4f0 [ 98.789973] [<ffffffff8106ff17>] ? notifier_call_chain+0x47/0x70 [ 98.818786] [<ffffffff812dfa3b>] kobject_uevent+0xb/0x10 [ 98.844391] [<ffffffff8139c5c8>] device_del+0x178/0x270 [ 98.869138] [<ffffffffa00cc887>] ? remove_intf_ep_devs+0x37/0x50 [usbcore] [ 98.902186] [<ffffffffa00cd042>] usb_disable_device+0x82/0x1d0 [usbcore] [ 98.933854] [<ffffffffa00c3cd8>] usb_disconnect+0x98/0x270 [usbcore] [ 98.964226] [<ffffffffa00c5df8>] hub_event+0x878/0x14e0 [usbcore] [ 98.993518] [<ffffffff81072dda>] worker_run_work+0x9a/0xe0 [ 99.020119] [<ffffffffa00c5580>] ? hub_port_debounce+0xd0/0xd0 [usbcore] [ 99.052157] [<ffffffff8106a76b>] process_one_work+0x1db/0x4e0 [ 99.079744] [<ffffffff8106aa9d>] worker_thread+0x2d/0x4a0 [ 99.105533] [<ffffffff8106aa70>] ? process_one_work+0x4e0/0x4e0 [ 99.134057] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 99.157061] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 99.185948] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 99.211385] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 99.240149] Code: df e8 be fe ff ff 48 c7 c7 f2 ff ff ff e8 c2 fd ff ff e9 78 ff ff ff 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 53 <f6> 47 38 04 48 89 fb 0f 85 c4 00 00 00 4c 8b 03 4c 8d 63 28 48 [ 99.329981] RIP [<ffffffffa0001327>] __enable_symbol_override+0x7/0x120 [redpill] [ 99.365744] RSP <ffff8800a9123b18> [ 99.382239] CR2: 0000000000000038 [ 99.398750] ---[ end trace 8f867192589ecfd1 ]--- [ 99.420810] BUG: unable to handle kernel paging request at ffffffffffffffd8 [ 99.454324] IP: [<ffffffff8106f81b>] kthread_data+0xb/0x20 [ 99.480551] PGD 180d067 PUD 180f067 PMD 0 [ 99.499656] Oops: 0000 [#3] SMP [ 99.515584] Modules linked in: tg3(OE) libphy(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O+) redpill(OE) [last unloaded: broadwellnk_synobios] [ 99.591210] CPU: 0 PID: 429 Comm: kworker/0:1 Tainted: P D W OE 4.4.180+ #42218 [ 99.629521] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 99.662873] task: ffff880432efb300 ti: ffff8800a9120000 task.ti: ffff8800a9120000 [ 99.698552] RIP: 0010:[<ffffffff8106f81b>] [<ffffffff8106f81b>] kthread_data+0xb/0x20 [ 99.735820] RSP: 0018:ffff8800a9123820 EFLAGS: 00010002 [ 99.761005] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 99.794609] RDX: ffff880433808400 RSI: 0000000000000000 RDI: ffff880432efb300 [ 99.828605] RBP: ffff8800a9123820 R08: ffff8804456163a8 R09: 0000001725f115c1 [ 99.862491] R10: 0000000000000000 R11: ffff880432efb360 R12: ffff880432efb300 [ 99.896263] R13: ffff880445616340 R14: ffff880445616340 R15: 0000000000000000 [ 99.930197] FS: 0000000000000000(0000) GS:ffff880445600000(0000) knlGS:0000000000000000 [ 99.968385] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.995778] CR2: 0000000000000028 CR3: 000000000180a000 CR4: 00000000000606f0 [ 100.029495] Stack: [ 100.038918] ffff8800a9123838 ffffffff8106b7ac 0000000000016340 ffff8800a9123888 [ 100.074100] ffffffff81560c7b 00000000304e7010 ffff8800a9123880 ffff880432efb300 [ 100.109142] ffff880432efb300 ffff8800a91238d8 ffff8800a9123488 ffff880433968000 [ 100.144261] Call Trace: [ 100.155871] [<ffffffff8106b7ac>] wq_worker_sleeping+0xc/0x90 [ 100.183067] [<ffffffff81560c7b>] __schedule+0x36b/0x7a0 [ 100.207861] [<ffffffff815610d6>] schedule+0x26/0x70 [ 100.231291] [<ffffffff81054ce6>] do_exit+0x686/0xa60 [ 100.255331] [<ffffffff81008174>] oops_end+0x84/0xb0 [ 100.278774] [<ffffffff810426ad>] no_context+0xfd/0x2a0 [ 100.303606] [<ffffffff8109e273>] ? vprintk_emit+0x2d3/0x4e0 [ 100.330612] [<ffffffff8104295b>] __bad_area_nosemaphore+0x10b/0x1f0 [ 100.360490] [<ffffffffa000b3fa>] ? GetHwCapability_shim+0x20a/0x220 [redpill] [ 100.394666] [<ffffffff81042a4e>] bad_area_nosemaphore+0xe/0x10 [ 100.422783] [<ffffffff81042e0e>] __do_page_fault+0x1ee/0x3e0 [ 100.450559] [<ffffffff8104300c>] do_page_fault+0xc/0x10 [ 100.475781] [<ffffffff81566892>] page_fault+0x22/0x30 [ 100.500013] [<ffffffffa0001327>] ? __enable_symbol_override+0x7/0x120 [redpill] [ 100.535095] [<ffffffffa000b2d9>] GetHwCapability_shim+0xe9/0x220 [redpill] [ 100.568158] [<ffffffffa00ce93b>] usb_uevent+0xdb/0x130 [usbcore] [ 100.596887] [<ffffffff8139e0e3>] dev_uevent+0x143/0x2c0 [ 100.621870] [<ffffffff812df711>] kobject_uevent_env+0x1d1/0x4f0 [ 100.650218] [<ffffffff8106ff17>] ? notifier_call_chain+0x47/0x70 [ 100.678992] [<ffffffff812dfa3b>] kobject_uevent+0xb/0x10 [ 100.704529] [<ffffffff8139c5c8>] device_del+0x178/0x270 [ 100.729688] [<ffffffffa00cc887>] ? remove_intf_ep_devs+0x37/0x50 [usbcore] [ 100.762865] [<ffffffffa00cd042>] usb_disable_device+0x82/0x1d0 [usbcore] [ 100.795173] [<ffffffffa00c3cd8>] usb_disconnect+0x98/0x270 [usbcore] [ 100.825453] [<ffffffffa00c5df8>] hub_event+0x878/0x14e0 [usbcore] [ 100.854517] [<ffffffff81072dda>] worker_run_work+0x9a/0xe0 [ 100.880777] [<ffffffffa00c5580>] ? hub_port_debounce+0xd0/0xd0 [usbcore] [ 100.912802] [<ffffffff8106a76b>] process_one_work+0x1db/0x4e0 [ 100.940256] [<ffffffff8106aa9d>] worker_thread+0x2d/0x4a0 [ 100.966311] [<ffffffff8106aa70>] ? process_one_work+0x4e0/0x4e0 [ 100.994606] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 101.017872] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 101.046917] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 101.072502] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 101.101262] Code: 99 4f 00 49 8b 04 24 48 85 c0 75 e6 e9 07 ff ff ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 87 c8 04 00 00 55 48 89 e5 <48> 8b 40 d8 5d c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 [ 101.190933] RIP [<ffffffff8106f81b>] kthread_data+0xb/0x20 [ 101.217405] RSP <ffff8800a9123820> [ 101.234082] CR2: ffffffffffffffd8 [ 101.249656] ---[ end trace 8f867192589ecfd2 ]--- [ 101.271675] Fixing recursive fault but reboot is needed! [ 232.759865] NMI backtrace for cpu 0 [ 232.759866] CPU: 0 PID: 429 Comm: kworker/0:1 Tainted: P D W OE 4.4.180+ #42218 [ 232.759866] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 232.759866] task: ffff880432efb300 ti: ffff8800a9120000 task.ti: ffff8800a9120000 [ 232.759867] RIP: 0010:[<ffffffff810929b6>] [<ffffffff810929b6>] queued_spin_lock_slowpath+0xd6/0x160 [ 232.759867] RSP: 0018:ffff8800a9123538 EFLAGS: 00000046 [ 232.759867] RAX: 0000000000000000 RBX: 0000000000016340 RCX: ffff880445616e00 [ 232.759868] RDX: 0000000000040000 RSI: 0000000000000001 RDI: ffff880445616340 [ 232.759868] RBP: ffff8800a9123538 R08: 0000000000000101 R09: 0000000000000927 [ 232.759868] R10: 0000000000000060 R11: ffffffff81a0562d R12: 0000000000000009 [ 232.759869] R13: ffff880445616340 R14: ffff880445616340 R15: 0000000000000000 [ 232.759869] FS: 0000000000000000(0000) GS:ffff880445600000(0000) knlGS:0000000000000000 [ 232.759869] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 232.759870] CR2: 0000000000000028 CR3: 000000000180a000 CR4: 00000000000606f0 [ 232.759870] Stack: [ 232.759870] ffff8800a9123548 ffffffff815645dd ffff8800a9123598 ffffffff8156099d [ 232.759871] 0000000000000008 ffff8800a91235b8 ffff880432efb300 ffff880432efb300 [ 232.759871] 0000000000000009 0000000000000046 ffff880432efb300 0000000000000009 [ 232.759871] Call Trace: [ 232.759871] [<ffffffff815645dd>] _raw_spin_lock_irq+0x1d/0x20 [ 232.759872] [<ffffffff8156099d>] __schedule+0x8d/0x7a0 [ 232.759872] [<ffffffff815610d6>] schedule+0x26/0x70 [ 232.759872] [<ffffffff81054e75>] do_exit+0x815/0xa60 [ 232.759872] [<ffffffff81008174>] oops_end+0x84/0xb0 [ 232.759873] [<ffffffff810426ad>] no_context+0xfd/0x2a0 [ 232.759873] [<ffffffff8104295b>] __bad_area_nosemaphore+0x10b/0x1f0 [ 232.759873] [<ffffffff812e65b4>] ? number.isra.14+0x2d4/0x2f0 [ 232.759874] [<ffffffff81042a4e>] bad_area_nosemaphore+0xe/0x10 [ 232.759874] [<ffffffff81042e0e>] __do_page_fault+0x1ee/0x3e0 [ 232.759874] [<ffffffff8104300c>] do_page_fault+0xc/0x10 [ 232.759875] [<ffffffff81566892>] page_fault+0x22/0x30 [ 232.759875] [<ffffffff8106f81b>] ? kthread_data+0xb/0x20 [ 232.759875] [<ffffffff8106b7ac>] wq_worker_sleeping+0xc/0x90 [ 232.759875] [<ffffffff81560c7b>] __schedule+0x36b/0x7a0 [ 232.759876] [<ffffffff815610d6>] schedule+0x26/0x70 [ 232.759876] [<ffffffff81054ce6>] do_exit+0x686/0xa60 [ 232.759876] [<ffffffff81008174>] oops_end+0x84/0xb0 [ 232.759876] [<ffffffff810426ad>] no_context+0xfd/0x2a0 [ 232.759877] [<ffffffff8109e273>] ? vprintk_emit+0x2d3/0x4e0 [ 232.759877] [<ffffffff8104295b>] __bad_area_nosemaphore+0x10b/0x1f0 [ 232.759877] [<ffffffffa000b3fa>] ? GetHwCapability_shim+0x20a/0x220 [redpill] [ 232.759878] [<ffffffff81042a4e>] bad_area_nosemaphore+0xe/0x10 [ 232.759878] [<ffffffff81042e0e>] __do_page_fault+0x1ee/0x3e0 [ 232.759878] [<ffffffff8104300c>] do_page_fault+0xc/0x10 [ 232.759879] [<ffffffff81566892>] page_fault+0x22/0x30 [ 232.759879] [<ffffffffa0001327>] ? __enable_symbol_override+0x7/0x120 [redpill] [ 232.759879] [<ffffffffa000b2d9>] GetHwCapability_shim+0xe9/0x220 [redpill] [ 232.759880] [<ffffffffa00ce93b>] usb_uevent+0xdb/0x130 [usbcore] [ 232.759880] [<ffffffff8139e0e3>] dev_uevent+0x143/0x2c0 [ 232.759880] [<ffffffff812df711>] kobject_uevent_env+0x1d1/0x4f0 [ 232.759881] [<ffffffff8106ff17>] ? notifier_call_chain+0x47/0x70 [ 232.759881] [<ffffffff812dfa3b>] kobject_uevent+0xb/0x10 [ 232.759881] [<ffffffff8139c5c8>] device_del+0x178/0x270 [ 232.759881] [<ffffffffa00cc887>] ? remove_intf_ep_devs+0x37/0x50 [usbcore] [ 232.759882] [<ffffffffa00cd042>] usb_disable_device+0x82/0x1d0 [usbcore] [ 232.759882] [<ffffffffa00c3cd8>] usb_disconnect+0x98/0x270 [usbcore] [ 232.759882] [<ffffffffa00c5df8>] hub_event+0x878/0x14e0 [usbcore] [ 232.759883] [<ffffffff81072dda>] worker_run_work+0x9a/0xe0 [ 232.759883] [<ffffffffa00c5580>] ? hub_port_debounce+0xd0/0xd0 [usbcore] [ 232.759883] [<ffffffff8106a76b>] process_one_work+0x1db/0x4e0 [ 232.759884] [<ffffffff8106aa9d>] worker_thread+0x2d/0x4a0 [ 232.759884] [<ffffffff8106aa70>] ? process_one_work+0x4e0/0x4e0 [ 232.759884] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 232.759885] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759885] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 232.759885] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759886] Code: 12 83 e0 03 83 ee 01 48 c1 e0 04 48 63 f6 48 05 00 6e 01 00 48 03 04 f5 20 6f 8d 81 48 89 08 8b 41 08 85 c0 75 12 f3 90 8b 41 08 <85> c0 74 f7 8b 07 66 85 c0 74 09 f3 90 8b 07 66 85 c0 75 f7 39 [ 232.759886] NMI backtrace for cpu 1 [ 232.759887] CPU: 1 PID: 11 Comm: watchdog/1 Tainted: P D W OE 4.4.180+ #42218 [ 232.759887] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 232.759887] task: ffff880433bb2640 ti: ffff880433bd0000 task.ti: ffff880433bd0000 [ 232.759888] RIP: 0010:[<ffffffff810929b6>] [<ffffffff810929b6>] queued_spin_lock_slowpath+0xd6/0x160 [ 232.759888] RSP: 0018:ffff880433bd3cc0 EFLAGS: 00000046 [ 232.759888] RAX: 0000000000000000 RBX: 0000000000000082 RCX: ffff880445656e00 [ 232.759889] RDX: 0000000000080000 RSI: 0000000000000002 RDI: ffff880445616340 [ 232.759889] RBP: ffff880433bd3cc0 R08: 0000000000000101 R09: 0000000000000001 [ 232.759889] R10: 0000000000000000 R11: 0000000000000810 R12: 0000000000000408 [ 232.759890] R13: 0000000000000400 R14: 0000000000000000 R15: ffff880445616340 [ 232.759890] FS: 0000000000000000(0000) GS:ffff880445640000(0000) knlGS:0000000000000000 [ 232.759890] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 232.759891] CR2: 00007f897fac0b53 CR3: 000000000180a000 CR4: 00000000000606f0 [ 232.759891] Stack: [ 232.759891] ffff880433bd3cd8 ffffffff815646c4 ffff8804338b8478 ffff880433bd3dd0 [ 232.759892] ffffffff81086c29 ffff880433bd3e04 000000018108124e 0000000000000000 [ 232.759892] ffff88044564f230 ffff88043388f608 ffff88043388f600 0000000000000002 [ 232.759892] Call Trace: [ 232.759892] [<ffffffff815646c4>] _raw_spin_lock_irqsave+0x24/0x30 [ 232.759893] [<ffffffff81086c29>] load_balance+0x299/0x930 [ 232.759893] [<ffffffff8107ebe2>] ? sched_clock_cpu+0xa2/0xc0 [ 232.759893] [<ffffffff8108749e>] pick_next_task_fair+0x1de/0x460 [ 232.759894] [<ffffffff81560d96>] __schedule+0x486/0x7a0 [ 232.759894] [<ffffffff81071fc0>] ? sort_range+0x20/0x20 [ 232.759894] [<ffffffff815610d6>] schedule+0x26/0x70 [ 232.759895] [<ffffffff81072122>] smpboot_thread_fn+0x162/0x170 [ 232.759895] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 232.759895] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759895] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 232.759896] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759896] Code: 12 83 e0 03 83 ee 01 48 c1 e0 04 48 63 f6 48 05 00 6e 01 00 48 03 04 f5 20 6f 8d 81 48 89 08 8b 41 08 85 c0 75 12 f3 90 8b 41 08 <85> c0 74 f7 8b 07 66 85 c0 74 09 f3 90 8b 07 66 85 c0 75 f7 39 [ 232.759897] NMI backtrace for cpu 2 [ 232.759897] CPU: 2 PID: 3945 Comm: kworker/u48:5 Tainted: P D W OE 4.4.180+ #42218 [ 232.759897] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 232.759898] task: ffff880432c98cc0 ti: ffff88042ec08000 task.ti: ffff88042ec08000 [ 232.759898] RIP: 0010:[<ffffffff810929c3>] [<ffffffff810929c3>] queued_spin_lock_slowpath+0xe3/0x160 [ 232.759898] RSP: 0018:ffff88042ec0bcb0 EFLAGS: 00000002 [ 232.759899] RAX: 0000000000040101 RBX: 0000000000000086 RCX: ffff880445696e00 [ 232.759899] RDX: 00000000000c0000 RSI: 0000000000000000 RDI: ffff880445616340 [ 232.759899] RBP: ffff88042ec0bcb0 R08: 0000000000000101 R09: 0000000000000001 [ 232.759900] R10: 0000000000000000 R11: 0000000000000810 R12: 0000000000000408 [ 232.759900] R13: 0000000000000400 R14: 0000000000000000 R15: ffff880445616340 [ 232.759901] FS: 0000000000000000(0000) GS:ffff880445680000(0000) knlGS:0000000000000000 [ 232.759901] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 232.759901] CR2: 00000000000000b8 CR3: 000000000180a000 CR4: 00000000000606f0 [ 232.759901] Stack: [ 232.759902] ffff88042ec0bcc8 ffffffff815646c4 ffff8804338b8478 ffff88042ec0bdc0 [ 232.759902] ffffffff81086c29 ffff88042ec0bdf4 00000002000000c8 0000000000000000 [ 232.759902] ffff88044568f230 ffff88043388f808 ffff88043388f800 0000000000000002 [ 232.759903] Call Trace: [ 232.759903] [<ffffffff815646c4>] _raw_spin_lock_irqsave+0x24/0x30 [ 232.759903] [<ffffffff81086c29>] load_balance+0x299/0x930 [ 232.759904] [<ffffffff8107ebe2>] ? sched_clock_cpu+0xa2/0xc0 [ 232.759904] [<ffffffff8108749e>] pick_next_task_fair+0x1de/0x460 [ 232.759904] [<ffffffff815609f4>] __schedule+0xe4/0x7a0 [ 232.759904] [<ffffffff815610d6>] schedule+0x26/0x70 [ 232.759905] [<ffffffff8106ab19>] worker_thread+0xa9/0x4a0 [ 232.759905] [<ffffffff8106aa70>] ? process_one_work+0x4e0/0x4e0 [ 232.759905] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 232.759906] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759906] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 232.759906] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759907] Code: f6 48 05 00 6e 01 00 48 03 04 f5 20 6f 8d 81 48 89 08 8b 41 08 85 c0 75 12 f3 90 8b 41 08 85 c0 74 f7 8b 07 66 85 c0 74 09 f3 90 <8b> 07 66 85 c0 75 f7 39 c2 75 1f 89 d0 be 01 00 00 00 f0 0f b1 [ 232.759908] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3dModules linked in: tg3(OE) libphy(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O+) redpill(OE) [last unloaded: broadwellnk_synobios] [ 232.759908] CPU: 3 PID: 7 Comm: rcu_sched Tainted: P D W OE 4.4.180+ #42218 [ 232.759908] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 232.759909] task: ffff88043396cc80 ti: ffff8804339b4000 task.ti: ffff8804339b4000 [ 232.759909] RIP: 0010:[<ffffffff81092a2e>] [<ffffffff81092a2e>] queued_spin_lock_slowpath+0x14e/0x160 [ 232.759909] RSP: 0018:ffff8804339b7c00 EFLAGS: 00000002 [ 232.759910] RAX: 0000000000040101 RBX: 0000000000000086 RCX: 0000000000000001 [ 232.759910] RDX: 0000000000000101 RSI: 0000000000000001 RDI: ffff880445616340 [ 232.759910] RBP: ffff8804339b7c00 R08: 0000000000000101 R09: 0000000000000001 [ 232.759911] R10: 0000000000000000 R11: 0000000000000810 R12: 0000000000000408 [ 232.759911] R13: 0000000000000400 R14: 0000000000000000 R15: ffff880445616340 [ 232.759911] FS: 0000000000000000(0000) GS:ffff8804456c0000(0000) knlGS:0000000000000000 [ 232.759912] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 232.759912] CR2: 00007f77158529b8 CR3: 000000000180a000 CR4: 00000000000606f0 [ 232.759912] Stack: [ 232.759913] ffff8804339b7c18 ffffffff815646c4 ffff8804338b8478 ffff8804339b7d10 [ 232.759913] ffffffff81086c29 ffff8804339b7d44 0000000300000000 0000000000000000 [ 232.759913] ffff8804456cf230 ffff88043388fa08 ffff88043388fa00 0000000000000002 [ 232.759914] Call Trace: [ 232.759914] [<ffffffff815646c4>] _raw_spin_lock_irqsave+0x24/0x30 [ 232.759914] [<ffffffff81086c29>] load_balance+0x299/0x930 [ 232.759914] [<ffffffff8107ebe2>] ? sched_clock_cpu+0xa2/0xc0 [ 232.759915] [<ffffffff8108749e>] pick_next_task_fair+0x1de/0x460 [ 232.759915] [<ffffffff815609f4>] __schedule+0xe4/0x7a0 [ 232.759915] [<ffffffff815610d6>] schedule+0x26/0x70 [ 232.759916] [<ffffffff81563b6c>] schedule_timeout+0x12c/0x270 [ 232.759916] [<ffffffff810adc30>] ? trace_event_raw_event_tick_stop+0xe0/0xe0 [ 232.759916] [<ffffffff810a97f6>] rcu_gp_kthread+0x3a6/0x8a0 [ 232.759917] [<ffffffff8108cc40>] ? wake_bit_function+0x60/0x60 [ 232.759917] [<ffffffff810a9450>] ? note_gp_changes+0x80/0x80 [ 232.759917] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 232.759917] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759918] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 232.759918] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759919] Code: 40 08 01 00 00 00 65 ff 0d fc 43 f8 7e 5d c3 f3 90 8b 37 81 fe 00 01 00 00 74 f4 e9 cd fe ff ff 83 fa 01 75 04 eb e6 f3 90 8b 07 <84> c0 75 f8 b8 01 00 00 00 66 89 07 5d c3 0f 1f 40 00 55 48 c7 [ 232.759919] Sending NMI to other CPUs: [ 232.759922] Kernel panic - not syncing: Hard LOCKUP [ 233.787269] Shutting down cpus with NMI [ 233.787269] Kernel Offset: disabled [ 238.982414] ---[ end Kernel panic - not syncing: Hard LOCKUP Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.