ingen300 Posted March 28, 2016 Share #26 Posted March 28, 2016 I cannot even use the keyboard, as I get a USBHid error http://i.imgur.com/ZPrRCnJ.jpg The version 6 is still not the stable version for Xpenology Quote Link to comment Share on other sites More sharing options...
Mentat Posted March 28, 2016 Share #27 Posted March 28, 2016 @ingen300 - please you are trolling! We know that DSM 6 is not compatible with the current Xpenoboot! It was automatic updated! The only thing that worked was: 1. Boot into Install Upgrade mode 2. Run SynoAssyst in order to find IP 3. Open browser to Install Wizard 4. Choose Clean install (delete settings, preserve files) 5. Install DSM_5.2-5644 6. Reboot and login with Admin and blank password 7. Make manual upgrade (one by one), from Update-1, Update-2, Update-3, Update-5 (there is no Update-4). The files for upgrade are here. 8. Reconfigure the nas... (two hours). Quote Link to comment Share on other sites More sharing options...
ingen300 Posted March 28, 2016 Share #28 Posted March 28, 2016 @ingen300 - please you are trolling! We know that DSM 6 is not compatible with the current Xpenoboot!It was automatic updated! The only thing that worked was: 1. Boot into Install Upgrade mode 2. Run SynoAssyst in order to find IP 3. Open browser to Install Wizard 4. Choose Clean install (delete settings, preserve files) 5. Install DSM_5.2-5644 6. Reboot and login with Admin and blank password 7. Make manual upgrade (one by one), from Update-1, Update-2, Update-3, Update-5 (there is no Update-4). The files for upgrade are here. 8. Reconfigure the nas... (two hours). Hi Mentat, I just share my experience about this problem. (Not trolling). In any DSM version 5.x will have automatic update function. This function can set to turn off for automatic updates. it look like you did not know about this function. I mention this is for anyone would like to recover the "Data File" only. Not the settings. Reason DSM 6 the HDD was not mounted into system. Quote Link to comment Share on other sites More sharing options...
Flarup Posted March 28, 2016 Share #29 Posted March 28, 2016 Now the all thing is working again, thanks to your very kind of help thank you very much as i told before im pretty new, so to understand it right is it necessary to have an usb with the Xpenobott in the server all the time ? if yes, to get the newest version of Xpenoboot is it then just to copy past to the usb ? Quote Link to comment Share on other sites More sharing options...
peterh88 Posted March 28, 2016 Share #30 Posted March 28, 2016 Hi ingen300, Thanks for your help with the downgrade on this one. I spent a couple of stressful hours after the update to DSM 6.0 and I thought I had lost all my data. Cheers Quote Link to comment Share on other sites More sharing options...
magnetio Posted March 28, 2016 Share #31 Posted March 28, 2016 Same here... Did not lose any files just had to reconfigure my nas... In DSM 6 in order to get root access and change VERSION file I had to telnet into it login with admin (root was not working) "sudo su -" to gain root access vi VERSION and changed it to a lower version reinstalled en reconfigured and working fine again Been searching for a while before decided to start reconfiguring I couln't find a way to get it back working as it was before update to DSM 6 Quote Link to comment Share on other sites More sharing options...
SpinningBird Posted March 28, 2016 Share #32 Posted March 28, 2016 I did the update to 6.0 aswell, I now have no volume (shows 6 unused disks) I was using SHR on 6x6TB drives in a microserver Have I lost my data as I cant see the volume? ...or do I just need to roll back to 5.2? Thanks Quote Link to comment Share on other sites More sharing options...
Flarup Posted March 28, 2016 Share #33 Posted March 28, 2016 I did the update to 6.0 aswell, I now have no volume (shows 6 unused disks) I was using SHR on 6x6TB drives in a microserver Have I lost my data as I cant see the volume? ...or do I just need to roll back to 5.2? Thanks You have not lost your data as long you'd did not formatted the disk Before you go back to 5.2 be sure you have the right pat file then complete the 6.0 update put your usb with the expenoboot file in to your server be sure that you have a screen connected to your server with the via cable restart your server boot with usb then choose the install/update 5.2 then go back to your computer and look for your server with sinology assistant choose to manual update and then browse to the 5444.4 pat file and then follow the instructions Quote Link to comment Share on other sites More sharing options...
SpinningBird Posted March 28, 2016 Share #34 Posted March 28, 2016 I did the update to 6.0 aswell, I now have no volume (shows 6 unused disks) I was using SHR on 6x6TB drives in a microserver Have I lost my data as I cant see the volume? ...or do I just need to roll back to 5.2? Thanks You have not lost your data as long you'd did not formatted the disk Before you go back to 5.2 be sure you have the right pat file then complete the 6.0 update put your usb with the expenoboot file in to your server be sure that you have a screen connected to your server with the via cable restart your server boot with usb then choose the install/update 5.2 then go back to your computer and look for your server with sinology assistant choose to manual update and then browse to the 5444.4 pat file and then follow the instructions Your a star Got back 3.8TB that I thought I had lost Cheers Quote Link to comment Share on other sites More sharing options...
carlosdanger Posted March 28, 2016 Share #35 Posted March 28, 2016 Hey guys, just wanted to confirm that these instructions also work for those who have xpenology under esxi. Mine updated on its own over the weekend and I was able to restore it back following these instructions. Many thanks to the original poster. It's even easier in esxi because you get to see what ip address synology gets reset to in console and your don't need putty. It can all be done in vsphere client. Mine wasn't even booting into 6.0 as it kept saying that "We've detected that the hard drives of your current DS3615xs had been moved..." I chose the 2nd option under installation prompt, but don't worry it won't format your drives. I don't think 6.0 can get access to your drives if you are using xpanoboot anyway. I let it download the files on its own because it wouldn't accept any of my pat files. Once you set your admin account your can just follow the instructions from here from the console. The 2nd time it let me use my old pat files. And yes use sudo su and vi. If you are using a different bootloader, I can't say this method will work. You can always create a new VM and use your old disk images. Quote Link to comment Share on other sites More sharing options...
ingen300 Posted March 29, 2016 Share #36 Posted March 29, 2016 Hi All, Thanks from your comments.... Regards, Ingen300 Quote Link to comment Share on other sites More sharing options...
abced Posted March 29, 2016 Share #37 Posted March 29, 2016 Hi Mentat, I just share my experience about this problem. (Not trolling). In any DSM version 5.x will have automatic update function. This function can set to turn off for automatic updates. it look like you did not know about this function. I mention this is for anyone would like to recover the "Data File" only. Not the settings. Reason DSM 6 the HDD was not mounted into system. You can easily turn off task for updates in task manager. I thought that was obvious. Quote Link to comment Share on other sites More sharing options...
ingen300 Posted March 29, 2016 Share #38 Posted March 29, 2016 Hi Mentat, I just share my experience about this problem. (Not trolling). In any DSM version 5.x will have automatic update function. This function can set to turn off for automatic updates. it look like you did not know about this function. I mention this is for anyone would like to recover the "Data File" only. Not the settings. Reason DSM 6 the HDD was not mounted into system. You can easily turn off task for updates in task manager. I thought that was obvious. Yes...abced ... i think he really do not know..... Quote Link to comment Share on other sites More sharing options...
nstar Posted March 29, 2016 Share #39 Posted March 29, 2016 I need some help / assistance here!! I stupidly left the XPEnology Diskstation to auto update and its updated itself, all I get now when I log into the Diskstation via the Web Assisant is; "We've detected that the hard drives of your current DS3615xs, had been moved from a previous DS3615xs, and installing a newer DSM is required before continuing" Device info; FW 5.2-5644 DSM Ver; 6.0-7321 I've tried to install via the Web Assisant, nothing seems to install, I just go back to the above message on rebooting If i check the status via Synology Assistant it reports as "Migratable" I've also hooked up a monitor to the diskstation but cant log in, the keyboard doesnt seem to work. I dont even think SSH is enabled either; help anyone!! Quote Link to comment Share on other sites More sharing options...
Flarup Posted March 29, 2016 Share #40 Posted March 29, 2016 I need some help / assistance here!! I stupidly left the XPEnology Diskstation to auto update and its updated itself, all I get now when I log into the Diskstation via the Web Assisant is; "We've detected that the hard drives of your current DS3615xs, had been moved from a previous DS3615xs, and installing a newer DSM is required before continuing" Device info; FW 5.2-5644 DSM Ver; 6.0-7321 I've tried to install via the Web Assisant, nothing seems to install, I just go back to the above message on rebooting If i check the status via Synology Assistant it reports as "Migratable" I've also hooked up a monitor to the diskstation but cant log in, the keyboard doesnt seem to work. I dont even think SSH is enabled either; help anyone!! when you are on the screen "migrate" be sure you have the right pat file local on your computer, then choose to update manual when you get the next screen with two options choose option 2 if it fails, then try again i did this two times before it would downgrade Quote Link to comment Share on other sites More sharing options...
nstar Posted March 29, 2016 Share #41 Posted March 29, 2016 I need some help / assistance here!! I stupidly left the XPEnology Diskstation to auto update and its updated itself, all I get now when I log into the Diskstation via the Web Assisant is; "We've detected that the hard drives of your current DS3615xs, had been moved from a previous DS3615xs, and installing a newer DSM is required before continuing" Device info; FW 5.2-5644 DSM Ver; 6.0-7321 I've tried to install via the Web Assisant, nothing seems to install, I just go back to the above message on rebooting If i check the status via Synology Assistant it reports as "Migratable" I've also hooked up a monitor to the diskstation but cant log in, the keyboard doesnt seem to work. I dont even think SSH is enabled either; help anyone!! when you are on the screen "migrate" be sure you have the right pat file local on your computer, then choose to update manual when you get the next screen with two options choose option 2 if it fails, then try again i did this two times before it would downgrade Do you mean - Clean installation; keep my files only? I've tried the Migration; keep my files and settings, but has failed everytime thanks! Quote Link to comment Share on other sites More sharing options...
Flarup Posted March 29, 2016 Share #42 Posted March 29, 2016 Yeps Choose clean installation And be sure you have the right pat file [emoji3] Don't worry you only loose all your settings and packages but you don't loose any data Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Flarup Posted March 29, 2016 Share #43 Posted March 29, 2016 You shal not choose formate disk if you got that option Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
nstar Posted March 30, 2016 Share #44 Posted March 30, 2016 Yeps Choose clean installation And be sure you have the right pat file [emoji3] Don't worry you only loose all your settings and packages but you don't loose any data Thanks, that worked! I was a bit nervous choosing that option, but does work, cheers! Quote Link to comment Share on other sites More sharing options...
ingen300 Posted March 30, 2016 Share #45 Posted March 30, 2016 Hi Flarup, Good ....you are the star........ Quote Link to comment Share on other sites More sharing options...
paddlingpool Posted March 30, 2016 Share #46 Posted March 30, 2016 Mine too was on auto update Is there a way to revert back but keep all settings and packages? I have many settings and scripts plus a lot of camera settings on surveillance station 7.1 and quite a few packages. Quote Link to comment Share on other sites More sharing options...
ingen300 Posted March 31, 2016 Share #47 Posted March 31, 2016 Mine too was on auto update Is there a way to revert back but keep all settings and packages? I have many settings and scripts plus a lot of camera settings on surveillance station 7.1 and quite a few packages. Hi paddlingpool... there was no way keep the settings of the packages. only data file will retain ... Quote Link to comment Share on other sites More sharing options...
paddlingpool Posted March 31, 2016 Share #48 Posted March 31, 2016 Thought that might be the case So at the moment it has installed automatically but to complete the installation I have to select a .pat file manually right? If so, can you tell me what .pat file this is please? is it the 5644 one? Or, Do I have to let the box select automatically what .pat file it is and let the installation complete before i can revert back manually? Quote Link to comment Share on other sites More sharing options...
eddyyin Posted March 31, 2016 Share #49 Posted March 31, 2016 Thank you Flarup so much to solve my big problem I accidently upgrade FW 5.2-5644 to Ver; 6.0-7321 and XPEnology boot usb is not support 6.0 NAS disk can not access, I use DSM 5.2-5644 install again and select clear install, all data will keep, you just lost all your setting, but it's ok to set setting again in 1 hour, so thanks again! Quote Link to comment Share on other sites More sharing options...
ingen300 Posted April 1, 2016 Share #50 Posted April 1, 2016 Thought that might be the case So at the moment it has installed automatically but to complete the installation I have to select a .pat file manually right? If so, can you tell me what .pat file this is please? is it the 5644 one? Or, Do I have to let the box select automatically what .pat file it is and let the installation complete before i can revert back manually? paddlingpool don`t be so sad... yes you need select manual. before process select manual you need to download the file DSM DS3615sx_5644.pat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.