gnoboot

XPEnology gnoBoot

Recommended Posts

That method is only for small updates, not new builds (4458 vs 4482).

 

edit: I think gnoboot just needs to and the new build version to the version file buried in rd.gz, which is buried in the zImage now. Lets hope he finds some time to update it :smile:

 

edit2: looks like I was wrong. It's much easier :smile: Just need to edit grub menu_me

 

kernel /zImage gnoboot_me=5.0-4482

 

But looks like they added new secruity meaursures :cry:

 

 

 

 

So, you made the change to the grub first, then update? o

Share this post


Link to post
Share on other sites

Thank you very much,

It's ok now to boot Gnoboot.

 

But I have an other problem now !

 

At the end of install of DSM, the server is lost.

When I go to Name_Server:5000, I have this:

 

Share this post


Link to post
Share on other sites

Hi, I have just updated my DSM from 4.3-3810 to 5.0-4438 using gnoboot-alpha 10.5 in my N54l . I then plugged in my Contex DTV-01 USB stick (with "LGS8GL5" chipset) but the device manager can't detect the USB stick (It can be detected while I was using DSM 4.3-3810). Can anyone help me with this issue?

 

Below is the dmesg information after i plugged in the Contex DTV-01 USB stick but the DSM Panel still doesn't show any external usb device is connected:

 

[ 525.247101] usbcore: deregistering interface driver dvb_usb_cxusb

[ 528.348829] dsmnotify.cgi[6374]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe65c30 error 6

[ 528.797115] usb 1-3: new high-speed USB device number 4 using ehci_hcd

[ 529.203259] dvb_usb_cxusb: probe of 1-3:1.0 failed with error -22

[ 529.203383] usbcore: registered new interface driver dvb_usb_cxusb

 

BTW, I found the firmware for "LGS8GL5" chipset of this DMB-TH USB stick Contex DTV-01: https://github.com/cernekee/linux-firmw ... lgs8g75.fw

 

I tried to put it in volume1/@appstore/VideoStation/etc/KernelFirmwares/ folder but the USB stick still cannot be detected.

 

Can anyone help with this issue?

 

I encountered the same problem in DSM5.0. I tried to use Sancome's NanoBoot x64 lately, it works with DTV-01. But I do not know the stabiility of NanoBoot. You may take it a shot.

 

http://nas1.cn/thread-83382-1-1.html

Share this post


Link to post
Share on other sites
Hi everybody

I'm trying to install DSM 5.0 upgrading from Trantor 4.2 to GnoBoot 5.0. I have followed the instructions

-Flash usb with gnoboot

-boot using gnoboot.me

-find the station using synology asistant.

but at this point the assistant doesnt say "migratable" instead it says "Configuration lost"

 

has anyone come by this ?? I'm hesitant to proceed.

 

The only thing I read about on the official Synology website is that this will happen when you reset the NAS, but you won't lose any data (although not guaranteed). Only the configuration and settings will be lost, but that shouldn't be a big issue. If you don't want to lose your data making a backup is highly recommended of course. :!:

 

Thanks R0KH, true. The update happened with no data loss but I had to re install packages and re configure all which wasnt a big deal.

Share this post


Link to post
Share on other sites

Update for Xen Paravirtualization:

 

 

 

bump :smile:, anything new? Or any idea what shoul I try?

Try it again using 10.5, added more boot-up messages to trace your problem.

 

Just updated to 10.5 here is console output with debug option: (Still stops during boot)

 

(This are my kernel command options: "root=/dev/md0 console=hvc0 sn=B3JN00... debug" )

 

[    0.000000] Linux version 3.2.40 (root@gnoboot) (gcc version 4.2.0) #8 SMP Sat Apr 5 10:56:54 CST 2014
[    0.000000] Command line:  root=/dev/md0 console=hvc0 sn=B3JN00... debug
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] ACPI in unprivileged domain disabled
[    0.000000] Released 0 pages of unused memory
[    0.000000] Set 0 page(s) to 1-1 mapping
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000040000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI not present or invalid.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 0286a000
[    0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[    0.000000]  0000000000 - 0040000000 page 4k
[    0.000000] kernel direct mapping tables up to 40000000 @ dfe000-1000000
[    0.000000] xen: setting RW the range fe4000 - 1000000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x00040000
[    0.000000] On node 0 totalpages: 262032
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 491 pages reserved
[    0.000000]   DMA zone: 3437 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3528 pages used for memmap
[    0.000000]   DMA32 zone: 254520 pages, LIFO batch:31
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] No local APIC present
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:c0000000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.1.5 (preserve-AD)
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88003fc00000 s75776 r8192 d22528 u1048576
[    0.000000] pcpu-alloc: s75776 r8192 d22528 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257957
[    0.000000] Kernel command line: root=/dev/md0 ihd_num=1 netif_num=4 syno_hw_version=DS3612xs  root=/dev/md0 console=hvc0 sn=B3JN00... debug
[    0.000000] Internal HD num: 1
[    0.000000] Internal netif num: 4
[    0.000000] Synology Hardware Version: DS3612xs-j
[    0.000000] Serial Number: B3JN00...
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 1003804k/1048576k available (3547k kernel code, 448k absent, 44324k reserved, 2915k data, 15716k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:288 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [hvc0] enabled
[    0.000000] Xen: using vcpuop timer interface
[    0.000000] installing Xen timer for CPU 0
[    0.000000] Detected 2333.440 MHz processor.
[    0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.88 BogoMIPS (lpj=2333440)
[    0.000999] pid_max: default: 32768 minimum: 301
[    0.000999] Mount-cache hash table entries: 256
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 0
[    0.000999] SMP alternatives: switching to UP code
[    0.026035] cpu 0 spinlock event irq 17
[    0.026071] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[    0.026291] installing Xen timer for CPU 1
[    0.026309] cpu 1 spinlock event irq 23
[    0.026349] SMP alternatives: switching to SMP code
[    0.049718] Brought up 2 CPUs
[    0.054223] xor: automatically using best checksumming function: generic_sse
[    0.059002]    generic_sse:  2404.000 MB/sec
[    0.059009] xor: using function: generic_sse (2404.000 MB/sec)
[    0.059079] Grant table initialized
[    0.059176] NET: Registered protocol family 16
[    0.061008] PCI: setting up Xen PCI frontend stub
[    0.061018] PCI: pci_cache_line_size set to 64 bytes
[    0.071584] bio: create slab  at 0
[    0.088025] raid6: int64x1   1996 MB/s
[    0.105006] raid6: int64x2   2648 MB/s
[    0.122002] raid6: int64x4   2644 MB/s
[    0.139003] raid6: int64x8   1949 MB/s
[    0.155998] raid6: sse2x1    2703 MB/s
[    0.172999] raid6: sse2x2    5937 MB/s
[    0.189989] raid6: sse2x4    6617 MB/s
[    0.190002] raid6: using algorithm sse2x4 (6617 MB/s)
[    0.190179] ACPI: Interpreter disabled.
[    0.190179] xen/balloon: Initialising balloon driver.
[    0.191115] xen-balloon: Initialising balloon driver.
[    0.192074] vgaarb: loaded
[    0.192303] SCSI subsystem initialized
[    0.192303] libata version 3.00 loaded.
[    0.193098] PCI: System does not support PCI
[    0.193098] PCI: System does not support PCI
[    0.193098] Switching to clocksource xen
[    0.193174] pnp: PnP ACPI: disabled
[    0.199722] PCI: max bus depth: 0 pci_try_num: 1
[    0.199851] NET: Registered protocol family 2
[    0.199958] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.200363] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.201257] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.201743] TCP: Hash tables configured (established 131072 bind 65536)
[    0.201753] TCP reno registered
[    0.201759] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.201775] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.201896] NET: Registered protocol family 1
[    0.202115] RPC: Registered named UNIX socket transport module.
[    0.202123] RPC: Registered udp transport module.
[    0.202128] RPC: Registered tcp transport module.
[    0.202132] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.202141] PCI: CLS 0 bytes, default 64
[    0.557713] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.625249] VFS: Disk quotas dquot_6.5.2
[    0.625304] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.625557] Registering the id_resolver key type
[    0.628707] msgmni has been set to 1960
[    0.628751] async_tx: api initialized (async)
[    0.631267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.631281] io scheduler noop registered
[    0.631286] io scheduler deadline registered
[    0.631315] io scheduler cfq registered (default)
[    0.637477] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.646865] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.646881] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    2.325694] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.525845] brd: module loaded
[    2.533117] blkfront: sdb: barrier: enabled
[    2.554799] Loading iSCSI transport class v2.0-870.
[    2.556776]  sdb: sdb1 sdb2
[    2.556827] This is not a kind of scsi disk 202
[    2.556852] This is not a kind of scsi disk 202
[    2.592125] blkfront: sda: barrier: enabled
[    2.602750]  sda: sda1
[    2.602787] This is not a kind of scsi disk 202
[    2.650311] rdac: device handler registered
[    2.705313] Initialising Xen virtual ethernet driver.
[    2.739467] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.762049] i8042: No controller found
[    3.803130] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    3.803407] rtc_cmos: probe of rtc_cmos failed with error -38
[    3.807517] i2c /dev entries driver
[    3.820073] coretemp coretemp.0: Using relative temperature scale!
[    3.827655] md: linear personality registered for level -1
[    3.827669] md: raid0 personality registered for level 0
[    3.827675] md: raid1 personality registered for level 1
[    3.827681] md: raid10 personality registered for level 10
[    3.827689] md: raid6 personality registered for level 6
[    3.827694] md: raid5 personality registered for level 5
[    3.827701] md: raid4 personality registered for level 4
[    3.830332] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.830787] TCP cubic registered
[    3.830797] NET: Registered protocol family 17
[    3.830831] Registering the dns_resolver key type
[    3.839735] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    3.847721] Freeing unused kernel memory: 15716k freed
[    3.857275] Write protecting the kernel read-only data: 6144k
[    3.861048] Freeing unused kernel memory: 532k freed
[    3.861604] Freeing unused kernel memory: 256k freed
:: START /linuxrc.syno[  OK  ]
:: Checking hypervisor[  OK  ]
Detected hypervisor: xen/xen-domU
:: Loading module xen-gntdev[  OK  ]
:: Loading module xen-gntalloc[  OK  ]
:: Loading module xenfs[  OK  ]
:: Loading module xen-evtchn[ BUSY ][    4.030259] Event-channel device installed.
[  OK  ]
:: Loading module virtio[  OK  ]
:: Loading module virtio_ring[  OK  ]
:: Loading module virtio_balloon[  OK  ]
:: Loading module virtio_mmio[  OK  ]
:: Loading module virtio_pci[  OK  ]
:: Loading module virtio_console[  OK  ]
:: Loading module virtio_blk[  OK  ]
:: Loading module virtio_net[  OK  ]
:: Loading module compat[ BUSY ][    4.183091] Loading modules backported from Linux version v3.12.8-0-g97f15f1
[    4.183107] Backport generated by backports.git v3.12.8-1-0-geb41fad
[  OK  ]
:: Loading module thermal_sys[  OK  ]
:: Loading module fan[FAILED]
:: Loading module container[FAILED]
:: Loading module synoacl_vfs[ BUSY ][    4.250357] synoacl_vfs: module license 'Proprietary' taints kernel.
[    4.250371] Disabling lock debugging due to kernel taint
[  OK  ]
:: Loading module synoacl_ext4[  OK  ]
:: Loading module mpt2sas[ BUSY ][    4.285014] mpt2sas version 13.100.00.00 loaded
[  OK  ]
:: Re-scanning disks[ BUSY ][    4.309895] md: Autodetecting RAID arrays.
[    4.309916] This is not a kind of scsi disk 202
[    4.322112] This is not a kind of scsi disk 202
[    4.346260] md: Scanned 2 and added 2 devices.
[    4.346269] md: autorun ...
[    4.346273] md: considering sdb1 ...
[    4.346282] md:  adding sdb1 ...
[    4.346288] md: sdb2 has different UUID to sdb1
[    4.346297] md: created md0
[    4.346302] md: bind
[    4.346321] md: running: 
[    4.346480] bio: create slab  at 1
[    4.346597] md/raid1:md0: active with 1 out of 12 mirrors
[    4.346626] md0: detected capacity change from 0 to 2549940224
[    4.346769] md: considering sdb2 ...
[    4.346778] md:  adding sdb2 ...
[    4.348156] md: created md1
[    4.348174] md: bind
[    4.348190] md: running: 
[    4.351910] md/raid1:md1: active with 1 out of 12 mirrors
[    4.351943] md1: detected capacity change from 0 to 2147418112
[    4.354611] md: ... autorun DONE.
[    4.382927]  md1: unknown partition table
[  OK  ]
:: Checking GRUB boot options[  OK  ]
+ exec
:: Generating boot image device nodes[  OK  ]

 

Thanks for any hint :smile:

Share this post


Link to post
Share on other sites

Hi Gnoboot, i´ve been using 10.5 with DSM 5.0 for a few weeks now. (i even got one of those LSi 9211-8i cards for it)

everything is working great aside from one small problem.

 

I am currently using 3 disks (2x2TB and 1x1.5TB, the 2TB disks are connected to Sata 0 and 1 on the raidcard (i see this during POST when i start the esxi 5.5 host)

Anyways, if i start with only the 2 2TB disks connected they appear as 1 and 2 in the webGUI, and if i insert the 1.5TB after booting DSM and letting everything finish the 3rd (1.5TB disk shows up as disk 3. But if i reboot the synology VM after that the 1.5TB disk hows up as disk number 2 in the GUI after reboot.

 

Its hardly a big problem, but it could cause some nuiciance incase one of the disks die and you acciodentally pull the wrong disk to replace. (Since the disk position in the web GUI does not properly reflect its position in the computer.)

Share this post


Link to post
Share on other sites

Somebody can post guide step by step

how to create a VMDK file from 7Z that I downloaded from the site gnobooot.me?

what and where "Linux Livecd" I have to download?

Thanks!

Share this post


Link to post
Share on other sites
Hi gnoboot,

 

Thank you very much!! I have tried to use the gnoboot-alpha 10.4, I can install my TV usb...

 

[  548.508112] usb 2-1: new high-speed USB device number 4 using ehci_hcd
[  548.908546] dvb-usb: found a 'Conexant DMB-TH Stick' in warm state.
[  549.249405] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  549.249602] DVB: registering new adapter (Conexant DMB-TH Stick)
[  551.459336] usb 2-1: DVB: registering adapter 0 frontend 0 (Legend Silicon LGS8913/LGS8GXX DMB-TH)...
[  551.459576] MXL5005S: Attached at address 0x63
[  551.460018] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-1/input/input4
[  551.460025] dvb-usb: schedule remote query interval to 100 msecs.
[  551.460244] dvb-usb: Conexant DMB-TH Stick successfully initialized and connected.
[  551.461146] usbcore: registered new interface driver dvb_usb_cxusb

 

BTW, I have clicked the ADs to support development. :mrgreen:

 

 

Dear revaiz,

 

May I know how can you run your Contex DTV-01 usb stick in DSM 5.0 using gnoboot 10.3/10.4/10.5?

 

I have tried every method but it still cannot be detected in DSM 5.0 using gnoboot 10.3/10.4/10.5 :-|

 

Thank you!

Share this post


Link to post
Share on other sites

It's working !!!

 

Before, I boot gnoboot.me and after install and reboot, I boot gnoboot.me again.

Now, I boot gnoboot.me and after install and reboot, I boot gnoboot.alpha.

 

Thank you

 

 

Thank you very much,

It's ok now to boot Gnoboot.

 

But I have an other problem now !

 

At the end of install of DSM, the server is lost.

When I go to Name_Server:5000, I have this:

[attachment=0]dsm.png[/attachment]

 

Why I have this problem ?

 

Thank you in advance.

Jerome

 

 

Hi,

 

I try to install Xpenology with gnoboot 10.5 but I have this message :

"fixing recursive fault but reboot is needed"

 

What do I do ?

 

Jerome

 

I read several times in these forums about removing the optical drive if you have a optical drive that is and get this message. It should work fine then. :wink:

Share this post


Link to post
Share on other sites

hi,

 

just a little question: When everything is working fine, is it possible to install the gnoBoot on the main hard disk partition to not use the usb key anymore ?

 

I plan to transfer the result on a hosted server, and I can't plug any usb key on it.

 

please help.

 

Sam

Share this post


Link to post
Share on other sites
hi,

 

just a little question: When everything is working fine, is it possible to install the gnoBoot on the main hard disk partition to not use the usb key anymore ?

 

I plan to transfer the result on a hosted server, and I can't plug any usb key on it.

 

please help.

 

Sam

 

No, it is not possible.

Share this post


Link to post
Share on other sites

It *is* possible but definitely not ideal because you will sacrifice all the space on your drive. I had to do this because my system would not boot from USB 100% of the time (sometimes the drive wasn't detected until after POST). I've been running in this configuration for a few weeks with no issues.

 

You will need a USB adapter for your hard drive (I'm using this one and it works great: http://www.newegg.com/Product/Product.aspx?Item=N82E16812161005)

 

YOU WILL LOSE ALL THE DATA ON THE DRIVE WITH THIS METHOD!

 

1.) Connect the hard drive you want to use to boot Synology from to the USB adapter, then to your computer.

2.) Prepare the drive with Win32DiskImager just as you would a thumbdrive.

3.) Put the newly-prepared disk into your Synology server, and boot it up! (use a SATA or IDE connection...USB is no longer required at this point)

Share this post


Link to post
Share on other sites

Hi,

 

i have gnoboot alpha 10.5 installed on my hardware (no Vmware) everything is fine except two fings :

 

when i reboot the gnoboot or DSM, my hardware bios tell me bad CMOS and he can't boot on my usb stick i have to go in menu settings of the bios and select the boot on usb every time... i change the battery on the motherboard but nothing change.

 

Secondly : gnoboot doesn't recognize my pci ethernet card. He see just my integrated ethernet card on motherboard. Do i have to add driver on gnoboot? How to do it?

 

Thank's for your answear

Share this post


Link to post
Share on other sites

Hi,

 

"Generally", bad CMOS issue are hardware related :sad: ... so i don't think it would be gnoboot related.

For your network card, it's simply not recognised because no driver is present for it in the current gnoboot release. Maybe asking gnoboot (very) nicely would solve your issue :wink:

 

for those having issues with vmware, you can try the simple (and efficient) tool : plop boot manager which enables the vm to boot from usb. Then a "standard" setup (with raw device mapping and classic usb key trick) is possible using esix 5.5 (for example)

 

I just wanted to send many thanks to gnoboot for is hard work regarding synology 5.0 port :smile: i successfully installed it on many different hardware (such as Zotac Z68wifi ... shuttle DS61 ... citrix xenserver and esxi 5.5) almost everything is working like a charm ... for an alpha relase it's pretty amazing !

 

The only missing thing for me is the dib0700 driver but i'm working on an alternative solution (or wait patiently for gnoboot to release his kernel sources) :smile:

 

congrats for all of this !

 

regards !

 

Volfield

Share this post


Link to post
Share on other sites

Hi,

 

Yeah i saw about the bios resseting settings. Apparently, it's DSM when power off or reboot he reset the bios settings.... I didn't see any solution.

Ok i will ask to in gnoboot site to add my network driver card.

 

Thank's for your answear and you're right, amazing job around xpenology and DSM.

Share this post


Link to post
Share on other sites

Hi,

 

Do you have Xpenology on your hardware directly? (None in VirtualBox or Vmware).

Did you have issue with bios settings resetting before installed Advanced Power Manager for Synology DS?

 

Thank's

Share this post


Link to post
Share on other sites
Hi gnoboot,

 

Thank you very much!! I have tried to use the gnoboot-alpha 10.4, I can install my TV usb...

 

[  548.508112] usb 2-1: new high-speed USB device number 4 using ehci_hcd
[  548.908546] dvb-usb: found a 'Conexant DMB-TH Stick' in warm state.
[  549.249405] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  549.249602] DVB: registering new adapter (Conexant DMB-TH Stick)
[  551.459336] usb 2-1: DVB: registering adapter 0 frontend 0 (Legend Silicon LGS8913/LGS8GXX DMB-TH)...
[  551.459576] MXL5005S: Attached at address 0x63
[  551.460018] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-1/input/input4
[  551.460025] dvb-usb: schedule remote query interval to 100 msecs.
[  551.460244] dvb-usb: Conexant DMB-TH Stick successfully initialized and connected.
[  551.461146] usbcore: registered new interface driver dvb_usb_cxusb

 

BTW, I have clicked the ADs to support development. :mrgreen:

 

 

Dear revaiz,

 

May I know how can you run your Contex DTV-01 usb stick in DSM 5.0 using gnoboot 10.3/10.4/10.5?

 

I have tried every method but it still cannot be detected in DSM 5.0 using gnoboot 10.3/10.4/10.5 :-|

 

Thank you!

 

 

Hi hkbnman,

 

As falconhk2007 said before, try to use NanoBoot instead, if you want to use Contex DTV-01 usb stick in DSM5.0

I've successfully using Contex DTV-01 usb stick in DSM5.0 with NanoBoot.

 

check the following link out~!

 

http://www.nas1.cn/thread-83483-1-1.html

 

Good luck~! :grin:

Share this post


Link to post
Share on other sites

Hi,

 

I'm currently running 4.3 on my HP54L on ESXi. Working like a charm but i want to upgrade to DSM 5. How to do this?

Can i install a new VM and then attach the old disks to it?

Share this post


Link to post
Share on other sites
Hi,

 

I'm currently running 4.3 on my HP54L on ESXi. Working like a charm but i want to upgrade to DSM 5. How to do this?

Can i install a new VM and then attach the old disks to it?

 

I suggest backing up data and then following this guide http://cyanlabs.co.uk/news/how-to-insta ... gy-on-esxi and then my new guide in a few hours once i get nanoboot sorted, alternatively you could jump straight to nanoboot but the guide may be missing some needed steps this way. BACKUP, even if you may not lose data you should still BACKUP :smile:

 

Also to update from gnoboot to nanoboot follow this guide - viewtopic.php?f=2&t=3068 - note you could skip going to gnoboot but it may be confusing.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.