hkbnman

Dear revaiz, May I know how can you run your Contex DTV-01 usb stick in DSM 5.0 using gnoboot 10.3/10.4/10.5? I have tried every method but it still cannot be detected in DSM 5.0 using gnoboot 10.3/10.4/10.5 Thank you!

Hi, I have just updated my DSM from 4.3-3810 to 5.0-4438 using gnoboot-alpha 10.5 in my N54l . I then plugged in my Contex DTV-01 USB stick (with "LGS8GL5" chipset) but the device manager can't detect the USB stick (It can be detected while I was using DSM 4.3-3810). Can anyone help me with this issue? Below is the dmesg information after i plugged in the Contex DTV-01 USB stick but the DSM Panel still doesn't show any external usb device is connected: [ 525.247101] usbcore: deregistering interface driver dvb_usb_cxusb [ 528.348829] dsmnotify.cgi[6374]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe65c30 error 6 [ 528.797115] usb 1-3: new high-speed USB device number 4 using ehci_hcd [ 529.203259] dvb_usb_cxusb: probe of 1-3:1.0 failed with error -22 [ 529.203383] usbcore: registered new interface driver dvb_usb_cxusb BTW, I found the firmware for "LGS8GL5" chipset of this DMB-TH USB stick Contex DTV-01: https://github.com/cernekee/linux-firmw ... lgs8g75.fw I tried to put it in volume1/@appstore/VideoStation/etc/KernelFirmwares/ folder but the USB stick still cannot be detected. Can anyone help with this issue?

Hi, I have just updated my DSM from 4.3-3810 to 5.0-4438 using gnoboot-alpha 10.5 in my N54l . I then plugged in my Contex DTV-01 USB stick (with "LGS8GL5" chipset) but the device manager can't detect the USB stick (It can be detected while I was using DSM 4.3-3810). Can anyone help me with this issue? Below is the dmesg information after i plugged in the Contex DTV-01 USB stick but the DSM Panel still doesn't show any external usb device is connected: [ 525.247101] usbcore: deregistering interface driver dvb_usb_cxusb [ 528.348829] dsmnotify.cgi[6374]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe65c30 error 6 [ 528.797115] usb 1-3: new high-speed USB device number 4 using ehci_hcd [ 529.203259] dvb_usb_cxusb: probe of 1-3:1.0 failed with error -22 [ 529.203383] usbcore: registered new interface driver dvb_usb_cxusb

Hi, I have just updated my DSM from 4.3-3810 to 5.0-4438 using gnoboot-alpha 10.5 in my N54l . I then plugged in my Contex DTV-01 USB stick (with "LGS8GL5" chipset) but the device manager can't detect the USB stick (It can be detected while I was using DSM 4.3-3810). Can anyone help me with this issue? How did you go about upgrading your N54L and were you able to retain the data? I am guessing that I would need to get the new DSM 5 with the 10.5 gnoboot (been reading all kinds of nonsense about passwords and difficulty in obtaining it) and shut down my N54L and take out the USB flash it with the new DSM 5 with gnoboot 10.5 and then turn it back up and finish the upgrade by pointing the assistant to the new pat file or whatever? I was all gungho on getting my synology box upgraded, but after just readng Plex isnt working, that is not going to work for me lol. I just followed the steps from: http://cyanlabs.co.uk/news/install-xpen ... mment-4259 to do the upgrade. All data is remain as 4.3, everything is running smooth except the Contex DTV-01 USB stick which cannot be detected even if I am now using gnoboot 10.4 version for boot up of DSM 5.0-4458 Update 2. As I said, the Contex DTV-01 USB stick can be detected and was working fine when I was using the DSM 4.3-3810 (I was using gnoboot 3 as boot up when I was using DSM 4.3-3810) BTW, can anyone tell me the steps to manually install the driver for this USB stick Contex DTV-01 USB stick for gnoboot 10.4/10.5?

Hi, I have just updated my DSM from 4.3-3810 to 5.0-4438 using gnoboot-alpha 10.5 in my N54l . I then plugged in my Contex DTV-01 USB stick (with "LGS8GL5" chipset) but the device manager can't detect the USB stick (It can be detected while I was using DSM 4.3-3810). Can anyone help me with this issue?