Recommended Posts

cam help me?

 

i use gnoboot10.3 boot xpe 3827

is can boot is work

 

but how to upgrade to 4458?

 

use boot gnoboot.me 4458(install/upgrade/downgrade)?

 

but this one is new install?

i boot this one in web install page can't find upgrade

Link to post
Share on other sites

Update for v5 on XenServer

 

Problem with hard disks persists. During installation of DSM -> Error 38. Tried 4458, 3827, booting with/without gnoboot_me... Still the same :sad:

 

cat /proc/partitions

major minor  #blocks  name

202       16    8388608 xvdb
202       17    2490240 xvdb1
202       18    2097152 xvdb2
202        0      32768 xvda
202        1      32098 xvda1

 

dmesg

[    0.000000] Linux version 3.2.40 (root@gnoboot) (gcc version 4.7.3 20130102 (prerelease) (crosstool-NG 1.18.0) ) #5 SMP Mon Mar 10 20:37:38 CST 2014
[    0.000000] Command line: gnoboot_me=5.0-4458
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fc00000 (usable)
[    0.000000]  BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Xen HVM domU, BIOS 4.1.5 11/28/2013
[    0.000000] Hypervisor detected: Xen HVM
[    0.000000] Xen version 4.1.
[    0.000000] Xen Platform PCI: I/O protocol version 1
[    0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
[    0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
[    0.000000] You might have to change the root device
[    0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
[    0.000000] in your root= kernel command line option
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x1fc00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-combining
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00F0000000 mask 3FF8000000 uncachable
[    0.000000]   1 base 00F8000000 mask 3FFC000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] found SMP MP-table at [ffff8800000fb730] fb730
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000001fc00000
[    0.000000]  0000000000 - 001fc00000 page 2M
[    0.000000] kernel direct mapping tables up to 1fc00000 @ 1fbfe000-1fc00000
[    0.000000] ACPI: RSDP 00000000000ea020 00024 (v02    Xen)
[    0.000000] ACPI: XSDT 00000000fc00eb80 00044 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: FACP 00000000fc00e940 000F4 (v04    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: DSDT 00000000fc002c40 0BC75 (v02    Xen      HVM 00000000 INTL 20090123)
[    0.000000] ACPI: FACS 00000000fc002c00 00040
[    0.000000] ACPI: APIC 00000000fc00ea40 000D8 (v02    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: HPET 00000000fc00eb20 00038 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: WAET 00000000fc00eb58 00028 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001ea00000-ffff88001f1fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0001fc00
[    0.000000] On node 0 totalpages: 129934
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1722 pages used for memmap
[    0.000000]   DMA32 zone: 124230 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1f48
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 15 CPUs, 13 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 1fc00000 (gap: 1fc00000:dc400000)
[    0.000000] Booting paravirtualized kernel on Xen HVM
[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:15 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88001f800000 s75712 r8192 d22592 u131072
[    0.000000] pcpu-alloc: s75712 r8192 d22592 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 -- 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128151
[    0.000000] Kernel command line: root=/dev/md0 ihd_num=1 netif_num=4 syno_hw_version=DS3612xs gnoboot_me=5.0-4458
[    0.000000] Internal HD num: 1
[    0.000000] Internal netif num: 4
[    0.000000] Synology Hardware Version: DS3612xs-j
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 486716k/520192k available (3447k kernel code, 456k absent, 33020k reserved, 3011k data, 14208k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:1208 16
[    0.000000] Xen HVM callback vector for event delivery is enabled
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Detected 1995.067 MHz processor.
[    0.001999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.13 BogoMIPS (lpj=1995067)
[    0.001999] pid_max: default: 32768 minimum: 301
[    0.001999] Mount-cache hash table entries: 256
[    0.001999] mce: CPU supports 0 MCE banks
[    0.004427] ACPI: Core revision 20110623
[    0.010808] Switched APIC routing to physical flat.
[    0.012387] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.023202] CPU0: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz stepping 0b
[    0.023223] Xen: using vcpuop timer interface
[    0.023235] installing Xen timer for CPU 0
[    0.023336] cpu 0 spinlock event irq 69
[    0.023340] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[    0.025037] cpu 1 spinlock event irq 70
[    0.026070] Booting Node   0, Processors  #1
[    0.026075] smpboot cpu 1: start_ip = 99000
[    0.001999] mce: CPU supports 0 MCE banks
[    0.001999] installing Xen timer for CPU 1
[    0.159134] Brought up 2 CPUs
[    0.159142] Total of 2 processors activated (4632.06 BogoMIPS).
[    0.189036] xor: automatically using best checksumming function: generic_sse
[    0.194000]    generic_sse:   152.000 MB/sec
[    0.194004] xor: using function: generic_sse (152.000 MB/sec)
[    0.194113] NET: Registered protocol family 16
[    0.205058] ACPI: bus type pci registered
[    0.209030] PCI: Using configuration type 1 for base access
[    0.321063] bio: create slab  at 0
[    0.338984] raid6: int64x1    234 MB/s
[    0.355993] raid6: int64x2    238 MB/s
[    0.372989] raid6: int64x4    238 MB/s
[    0.390006] raid6: int64x8    167 MB/s
[    0.406973] raid6: sse2x1     375 MB/s
[    0.423968] raid6: sse2x2     589 MB/s
[    0.440966] raid6: sse2x4     648 MB/s
[    0.440971] raid6: using algorithm sse2x4 (648 MB/s)
[    0.442032] ACPI: Added _OSI(Module Device)
[    0.442032] ACPI: Added _OSI(Processor Device)
[    0.442032] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.442032] ACPI: Added _OSI(Processor Aggregator Device)
[    0.459088] ACPI: EC: Look up EC in DSDT
[    0.506011] ACPI: Interpreter enabled
[    0.506019] ACPI: (supports S0 S5)
[    0.506033] ACPI: Using IOAPIC for interrupt routing
[    0.940032] ACPI: No dock devices found.
[    0.940041] HEST: Table not found.
[    0.940048] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.940978] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.942977] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.942983] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.942988] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.942994] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
[    0.943937] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[    0.948982] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[    0.957926] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[    0.963885] pci 0000:00:01.1: reg 20: [io  0xc220-0xc22f]
[    0.967004] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[    0.972879] pci 0000:00:01.2: reg 20: [io  0xc200-0xc21f]
[    0.975978] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[    0.976007] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[    0.976010] * this clock source is slow. Consider trying other clock sources
[    0.982981] pci 0000:00:01.3: quirk: [io  0x1f40-0x1f7f] claimed by PIIX4 ACPI
[    0.985879] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[    0.986971] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
[    0.987993] pci 0000:00:02.0: reg 14: [mem 0xf3000000-0xf3000fff]
[    0.994959] pci 0000:00:03.0: [5853:0001] type 0 class 0x000100
[    0.996875] pci 0000:00:03.0: reg 10: [io  0xc000-0xc0ff]
[    0.997876] pci 0000:00:03.0: reg 14: [mem 0xf2000000-0xf2ffffff pref]
[    1.004045] pci_bus 0000:00: on NUMA node 0
[    1.004053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.008895]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    1.833839] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[    1.834826] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.834989] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.835837] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[    1.836799] xen/balloon: Initialising balloon driver.
[    1.837744] xen-balloon: Initialising balloon driver.
[    1.839778] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.839784] vgaarb: loaded
[    1.839787] vgaarb: bridge control possible 0000:00:02.0
[    1.841774] SCSI subsystem initialized
[    1.842795] libata version 3.00 loaded.
[    1.845812] PCI: Using ACPI for IRQ routing
[    1.845812] PCI: pci_cache_line_size set to 64 bytes
[    1.847763] reserve RAM buffer: 000000000009e000 - 000000000009ffff 
[    1.847769] reserve RAM buffer: 000000001fc00000 - 000000001fffffff 
[    1.849849] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.849872] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.849880] hpet0: 3 comparators, 64-bit 62.500000 MHz counter
[    1.853996] Switching to clocksource xen
[    1.853996] pnp: PnP ACPI init
[    1.853996] ACPI: bus type pnp registered
[    1.854039] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    1.854176] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.854183] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.854288] pnp 00:01: [bus 00-ff]
[    1.854293] pnp 00:01: [io  0x0cf8-0x0cff]
[    1.854298] pnp 00:01: [io  0x0000-0x0cf7 window]
[    1.854302] pnp 00:01: [io  0x0d00-0xffff window]
[    1.854307] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    1.854312] pnp 00:01: [mem 0xf0000000-0xfbffffff window]
[    1.854450] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.854465] pnp 00:02: [io  0x10c0-0x1141]
[    1.854470] pnp 00:02: [io  0xb044-0xb047]
[    1.854597] system 00:02: [io  0x10c0-0x1141] has been reserved
[    1.854603] system 00:02: [io  0xb044-0xb047] has been reserved
[    1.854608] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.854644] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.854761] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.854789] pnp 00:04: [io  0x0010-0x001f]
[    1.854796] pnp 00:04: [io  0x0022-0x002d]
[    1.854800] pnp 00:04: [io  0x0030-0x003f]
[    1.854804] pnp 00:04: [io  0x0044-0x005f]
[    1.854808] pnp 00:04: [io  0x0062-0x0063]
[    1.854813] pnp 00:04: [io  0x0065-0x006f]
[    1.854817] pnp 00:04: [io  0x0072-0x007f]
[    1.854821] pnp 00:04: [io  0x0080]
[    1.854826] pnp 00:04: [io  0x0084-0x0086]
[    1.854830] pnp 00:04: [io  0x0088]
[    1.854834] pnp 00:04: [io  0x008c-0x008e]
[    1.854838] pnp 00:04: [io  0x0090-0x009f]
[    1.854842] pnp 00:04: [io  0x00a2-0x00bd]
[    1.854846] pnp 00:04: [io  0x00e0-0x00ef]
[    1.854851] pnp 00:04: [io  0x08a0-0x08a3]
[    1.854855] pnp 00:04: [io  0x0cc0-0x0ccf]
[    1.854859] pnp 00:04: [io  0x04d0-0x04d1]
[    1.854994] system 00:04: [io  0x08a0-0x08a3] has been reserved
[    1.855000] system 00:04: [io  0x0cc0-0x0ccf] has been reserved
[    1.855005] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    1.855010] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.855028] pnp 00:05: [dma 4]
[    1.855033] pnp 00:05: [io  0x0000-0x000f]
[    1.855037] pnp 00:05: [io  0x0081-0x0083]
[    1.855041] pnp 00:05: [io  0x0087]
[    1.855045] pnp 00:05: [io  0x0089-0x008b]
[    1.855049] pnp 00:05: [io  0x008f]
[    1.855054] pnp 00:05: [io  0x00c0-0x00df]
[    1.855058] pnp 00:05: [io  0x0480-0x048f]
[    1.855174] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.855192] pnp 00:06: [io  0x0070-0x0071]
[    1.855212] xen: --> pirq=16 -> irq=8 (gsi=8)
[    1.855217] pnp 00:06: [irq 8]
[    1.855335] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.855349] pnp 00:07: [io  0x0061]
[    1.855469] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.855500] xen: --> pirq=17 -> irq=12 (gsi=12)
[    1.855505] pnp 00:08: [irq 12]
[    1.855623] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.855647] pnp 00:09: [io  0x0060]
[    1.855652] pnp 00:09: [io  0x0064]
[    1.855663] xen: --> pirq=18 -> irq=1 (gsi=1)
[    1.855669] pnp 00:09: [irq 1]
[    1.855789] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.855814] pnp 00:0a: [io  0x03f0-0x03f5]
[    1.855818] pnp 00:0a: [io  0x03f7]
[    1.855830] xen: --> pirq=19 -> irq=6 (gsi=6)
[    1.855834] pnp 00:0a: [irq 6]
[    1.855838] pnp 00:0a: [dma 2]
[    1.855956] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.855989] pnp 00:0b: [io  0x03f8-0x03ff]
[    1.856001] xen: --> pirq=20 -> irq=4 (gsi=4)
[    1.856005] pnp 00:0b: [irq 4]
[    1.856146] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.856191] pnp 00:0c: [io  0x0378-0x037f]
[    1.856203] xen: --> pirq=21 -> irq=7 (gsi=7)
[    1.856207] pnp 00:0c: [irq 7]
[    1.856329] pnp 00:0c: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.883448] pnp: PnP ACPI: found 13 devices
[    1.883453] ACPI: ACPI bus type pnp unregistered
[    1.894685] PCI: max bus depth: 0 pci_try_num: 1
[    1.894695] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.894700] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.894705] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.894710] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff]
[    1.894872] NET: Registered protocol family 2
[    1.894988] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[    1.895368] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    1.895465] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    1.895556] TCP: Hash tables configured (established 16384 bind 16384)
[    1.895561] TCP reno registered
[    1.895566] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.895574] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.895723] NET: Registered protocol family 1
[    1.895956] RPC: Registered named UNIX socket transport module.
[    1.895960] RPC: Registered udp transport module.
[    1.895964] RPC: Registered tcp transport module.
[    1.895968] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.895977] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.896106] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.896185] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.896316] xen: --> pirq=22 -> irq=23 (gsi=23)
[    1.896322] pci 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.896574] pci 0000:00:01.2: PCI INT D disabled
[    1.896667] pci 0000:00:02.0: Boot video device
[    1.896729] PCI: CLS 0 bytes, default 64
[    2.405522] VFS: Disk quotas dquot_6.5.2
[    2.405586] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.405980] Registering the id_resolver key type
[    2.408927] msgmni has been set to 950
[    2.408968] async_tx: api initialized (async)
[    2.411349] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.411355] io scheduler noop registered
[    2.411360] io scheduler deadline registered
[    2.411391] io scheduler cfq registered (default)
[    2.428210] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.443431] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.443438] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    2.446965] acpiphp: Slot [0] registered
[    2.454343] acpiphp: Slot [1] registered
[    2.457730] acpiphp: Slot [2] registered
[    2.462562] acpiphp: Slot [3] registered
[    2.466232] acpiphp: Slot [4] registered
[    2.470947] acpiphp: Slot [5] registered
[    2.473888] acpiphp: Slot [6] registered
[    2.480602] acpiphp: Slot [7] registered
[    2.485395] acpiphp: Slot [8] registered
[    2.491399] acpiphp: Slot [9] registered
[    2.494038] acpiphp: Slot [10] registered
[    2.501509] acpiphp: Slot [11] registered
[    2.505469] acpiphp: Slot [12] registered
[    2.513994] acpiphp: Slot [13] registered
[    2.519646] acpiphp: Slot [14] registered
[    2.524002] acpiphp: Slot [15] registered
[    2.530689] acpiphp: Slot [16] registered
[    2.536485] acpiphp: Slot [17] registered
[    2.539277] acpiphp: Slot [18] registered
[    2.544275] acpiphp: Slot [19] registered
[    2.549567] acpiphp: Slot [20] registered
[    2.552769] acpiphp: Slot [21] registered
[    2.559723] acpiphp: Slot [22] registered
[    2.565858] acpiphp: Slot [23] registered
[    2.573149] acpiphp: Slot [24] registered
[    2.579354] acpiphp: Slot [25] registered
[    2.584568] acpiphp: Slot [26] registered
[    2.590260] acpiphp: Slot [27] registered
[    2.597334] acpiphp: Slot [28] registered
[    2.601527] acpiphp: Slot [29] registered
[    2.604492] acpiphp: Slot [30] registered
[    2.609289] acpiphp: Slot [31] registered
[    2.623481] vesafb: mode is 1024x768x24, linelength=3072, pages=0
[    2.623486] vesafb: scrolling: redraw
[    2.623492] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    2.623731] vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90000080000, using 4096k, total 4096k
[    2.643020] Console: switching to colour frame buffer device 128x48
[    2.647308] fb0: VESA VGA frame buffer device
[    2.661523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.661533] ACPI: Power Button [PWRF]
[    2.666316] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[    2.666326] ACPI: Sleep Button [sLPF]
[    2.716055] ERST: Table is not found!
[    2.716095] GHES: HEST is not enabled!
[    2.716220] xen: --> pirq=23 -> irq=30 (gsi=30)
[    2.716227] xen-platform-pci 0000:00:03.0: PCI INT C -> GSI 30 (level, low) -> IRQ 30
[    2.718840] Grant table initialized
[    2.731011] init_memory_mapping: 0000000020000000-0000000028000000
[    2.731022]  0020000000 - 0028000000 page 2M
[    3.280160] Refined TSC clocksource calibration: 1995.066 MHz.
[    5.713527] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    5.758054] serial8250: ttyS1 at I/O 0x3f8 (irq = 4) is a 16550A
[    6.046200] brd: module loaded
[    6.052706] vbd vbd-5696: 19 xenbus_dev_probe on device/vbd/5696
[    6.054835] blkfront: xvdb: barrier: enabled
[    6.086531]  xvdb: xvdb1 xvdb2
[    6.086606] This is not a kind of scsi disk 202
[    6.086655] This is not a kind of scsi disk 202
[    6.099605] Loading iSCSI transport class v2.0-870.
[    6.158803] blkfront: xvda: barrier: enabled
[    6.199664]  xvda: xvda1
[    6.199721] This is not a kind of scsi disk 202
[    6.230614] Setting capacity to 16777216
[    6.230628] xvdb: detected capacity change from 0 to 8589934592
[    6.230931] Setting capacity to 65536
[    6.230939] xvda: detected capacity change from 0 to 33554432
[    6.273854] rdac: device handler registered
[    6.360872] Initialising Xen virtual ethernet driver.
[    6.419358] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    6.429296] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.429311] serio: i8042 AUX port at 0x60,0x64 irq 12
[    6.453125] rtc_cmos 00:06: RTC can wake from S4
[    6.462706] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    6.462806] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    6.465400] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    6.470193] i2c /dev entries driver
[    6.481540] md: linear personality registered for level -1
[    6.481551] md: raid0 personality registered for level 0
[    6.481555] md: raid1 personality registered for level 1
[    6.481559] md: raid10 personality registered for level 10
[    6.481564] md: raid6 personality registered for level 6
[    6.481568] md: raid5 personality registered for level 5
[    6.481572] md: raid4 personality registered for level 4
[    6.487427] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    6.487434] cpuidle: using governor ladder
[    6.487438] cpuidle: using governor menu
[    6.487764] TCP cubic registered
[    6.487771] NET: Registered protocol family 17
[    6.487816] Registering the dns_resolver key type
[    6.506531] XENBUS: Device with no driver: device/vbd/5696
[    6.506630] rtc_cmos 00:06: setting system clock to 2014-03-14 10:57:17 UTC (1394794637)
[    6.511857] Freeing unused kernel memory: 14208k freed
[    6.521142] Write protecting the kernel read-only data: 6144k
[    6.524358] Freeing unused kernel memory: 632k freed
[    6.526220] Freeing unused kernel memory: 280k freed
[    6.788092] Event-channel device installed.
[    6.813780] virtio_blk: Unknown symbol register_virtio_driver (err 0)
[    6.813813] virtio_blk: Unknown symbol unregister_virtio_driver (err 0)
[    6.813836] virtio_blk: Unknown symbol virtqueue_add_buf (err 0)
[    6.813847] virtio_blk: Unknown symbol virtqueue_get_buf (err 0)
[    6.813855] virtio_blk: Unknown symbol virtqueue_kick (err 0)
[    6.813865] virtio_blk: Unknown symbol virtio_check_driver_offered_feature (err 0)
[    6.834445] virtio_net: Unknown symbol register_virtio_driver (err 0)
[    6.834454] virtio_net: Unknown symbol virtqueue_enable_cb (err 0)
[    6.834464] virtio_net: Unknown symbol virtqueue_detach_unused_buf (err 0)
[    6.834490] virtio_net: Unknown symbol unregister_virtio_driver (err 0)
[    6.834496] virtio_net: Unknown symbol virtqueue_get_vring_size (err 0)
[    6.834505] virtio_net: Unknown symbol virtqueue_disable_cb (err 0)
[    6.834513] virtio_net: Unknown symbol virtqueue_add_buf (err 0)
[    6.834525] virtio_net: Unknown symbol virtqueue_get_buf (err 0)
[    6.834533] virtio_net: Unknown symbol virtqueue_kick (err 0)
[    6.834546] virtio_net: Unknown symbol virtio_check_driver_offered_feature (err 0)
[    6.834552] virtio_net: Unknown symbol virtqueue_enable_cb_delayed (err 0)
[    7.025215] md: Autodetecting RAID arrays.
[    7.025285] This is not a kind of scsi disk 202
[    7.053842] md: deny xvdb1.
[    7.053848] md: export_rdev(xvdb1)
[    7.053885] This is not a kind of scsi disk 202
[    7.076781] md: deny xvdb2.
[    7.076786] md: export_rdev(xvdb2)
[    7.076817] md: Scanned 2 and added 0 devices.
[    7.076820] md: autorun ...
[    7.076824] md: ... autorun DONE.
[    7.144592] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[    7.144599] Disabling lock debugging due to kernel taint
[    7.146342] synobios: load, major number 201
[    7.146349] Brand: Synology
[    7.146353] Model: DS-3612xs
[    7.146358] set group disks wakeup number to 4, spinup time deno 7
[    7.647139] synobios cpu_arch proc entry initialized
[    7.679666] synobios: unload
[    7.937322] md: md1 stopped.
[    8.031327] Unable to find swap-space signature
[    8.122555] NET: Registered protocol family 10
[    8.266490] usbcore: registered new interface driver usbfs
[    8.271093] usbcore: registered new interface driver hub
[    8.280151] usbcore: registered new interface driver ethub
[    8.291159] usbcore: registered new device driver usb
[    9.423197] Intel AES-NI instructions are not detected.
[    9.503154] fuse init (API version 7.22)
[    9.532359] dca service started, version 1.12.1
[    9.565519] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[    9.565525] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    9.611723] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
[    9.611729] Copyright (c) 2007-2011 Intel Corporation.
[    9.670548] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k
[    9.670554] ixgbe: Copyright (c) 1999-2011 Intel Corporation.
[    9.821233] bio: create slab  at 1
[    9.821776] Btrfs loaded
[    9.936359] synobios: load, major number 201
[    9.936372] Brand: Synology
[    9.936382] Model: DS-3612xs
[    9.936387] set group disks wakeup number to 4, spinup time deno 7
[   10.438175] synobios cpu_arch proc entry initialized
[   18.635331] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   18.668185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   18.758063] uhci_hcd: USB Universal Host Controller Interface driver
[   18.758305] uhci_hcd 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[   18.758393] uhci_hcd 0000:00:01.2: setting latency timer to 64
[   18.758425] uhci_hcd 0000:00:01.2: UHCI Host Controller
[   18.758468] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[   18.758821] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
[   18.760177] hub 1-0:1.0: USB hub found
[   18.760187] hub 1-0:1.0: 2 ports detected
[   18.816817] Initializing USB Mass Storage driver...
[   18.817311] usbcore: registered new interface driver usb-storage
[   18.817316] USB Mass Storage support registered.
[   18.844676] usbcore: registered new interface driver usblp
[   18.905881] usbcore: registered new interface driver usbhid
[   18.905887] usbhid: USB HID core driver
[   19.089171] usb 1-2: new full-speed USB device number 2 using uhci_hcd
[   20.289864] input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input3
[   20.289877] Get empty minor:104
[   20.292279] generic-usb 0003:0627:0001.0001: input,hiddev0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0

Link to post
Share on other sites
Update for v5 on XenServer

 

Problem with hard disks persists. During installation of DSM -> Error 38. Tried 4458, 3827, booting with/without gnoboot_me... Still the same :sad:

 

[ 0.000000] Linux version 3.2.40 (root@gnoboot) (gcc version 4.7.3 20130102 (prerelease) (crosstool-NG 1.18.0) ) #5 SMP Mon Mar 10 20:37:38 CST 2014

 

Lol, you're using the wrong zImage. That's five-zero kernel which doesn't have the XEN disk patch. :lol:

Link to post
Share on other sites

Works like a charm on HP N54L with gnoboot 10.3 NATIVE!

 

Not testet much so far, but by now I'm pretty happy with it. Just got the device today

and directly fired up the 10.3 image on it following this guide: viewtopic.php?f=2&t=2545#p13838

 

Here are a few Screenshots (german ui), setup is the N54L with 5 disks (4 internal, 1 in a 5 1/4" noname Sata-Frame) and the USB Stick on the internal Port.

 

http://take.ms/wshX2

http://take.ms/5cBAr

http://take.ms/8Kta5

http://take.ms/HNdm5

http://take.ms/r60jp

http://take.ms/xKgQ1

http://take.ms/bUID6

http://take.ms/Y5nSr

Link to post
Share on other sites

actually it is not necessary to make mirror.

although you may not be able to down it, you can make a copy to your google drive

then download it from your own google drive.

 

I just made a copy to my own google drive and it immediately synced to my computer in a second.

Link to post
Share on other sites

i don't have time recently to test it on the real machine yet.

 

Just ask for safety.

 

I'm currently running DSM4.3, when i decided to upgrade to 5.0, should i boot from gnoboot-alpha and upgrade online,

or boot from gnoboot.me and upgrade from syno assistant??

Link to post
Share on other sites
Sorry if it was already asked but does it work with HP N40L ? :roll:

Thanks.

 

Yes. Its one of my current test rigs.

 

Great, good news, thanks for your reply !

And do you know If I can upgrade from 4.3 to 5.0 with gnoboot without data lost ?

Can I use this tutorial with my N40L : viewtopic.php?f=2&t=2545 ?

Many thanks !

Edited by Guest
Link to post
Share on other sites
Update for v5 on XenServer

 

Problem with hard disks persists. During installation of DSM -> Error 38. Tried 4458, 3827, booting with/without gnoboot_me... Still the same :sad:

 

[ 0.000000] Linux version 3.2.40 (root@gnoboot) (gcc version 4.7.3 20130102 (prerelease) (crosstool-NG 1.18.0) ) #5 SMP Mon Mar 10 20:37:38 CST 2014

 

Lol, you're using the wrong zImage. That's five-zero kernel which doesn't have the XEN disk patch. :lol:

 

okey :grin: (misunderstood your gdisk files..), anyway I just downloaded last one just now:

 

uname -a

Linux DiskStation 3.2.40 #1 SMP Sat Mat 15 13:16:17 CST 2014 x86_64 GNU/Linux synology_bromlow_3612xs

 

DSM 5.0 4458 sucesfully installed on XenServer 6.2SP1 using gnoboot-alpha10.3-zImage !

  • Using 32MB primary boot disk, and 8GB second system disk, 2 VCPU, 512MB RAM
  • Using HVM (Other install media, during Xen VM creation).
  • Disabled viridian `xe vm-param-set uuid=... platform:viridian=false` (Makes sure virt-what coretly recognizes Xen)
  • gnoBoot image installed using `dd if=gnoboot-alpha-vfat.img of=/dev/sda1` (Using Debian Live distro)
  • Modified `/boot/grub/menu_alpha.lst` and `/boot/grub/menu_me.lst` added `vga=0x318 sn=B3JN00...`
  • DSM 5.0 4458 installed after booting with grub menu item gnoboot.me –> install/upgrade/downgrade 4458

 

Thank you gnoBoot! :smile: Thank you very much!

 

Later this weekend, maybe next week I will try to install xe-guest-utilities, and hopefuly I will give paravirtualization another shot :smile: (If suceeded I will post guide/code here)

Link to post
Share on other sites

Hi everyone!

Once again, many thanks Gnoboot for your work!

I managed to upgrade to the DSM 5.0 4458 with the gnoboot 10.3vfat image on a HP N54L. Before, I had a native install with DSM 4.3 3827.

So far it works pretty well. No loss of data. The only things is that i don't see my shared folders in the File station, eventhough settings are still the same as i had on the previous DSM and i can access my shared files... I guess i'll have to go through the settings again.

 

As soon as i find time, i'll try an install with esxi 5.1. Will let you know how it goes.

 

Once again thank you very much for your work all of you :smile:

 

Edit: problem solved. It was a user right issue.

Link to post
Share on other sites

Google won't let me download alpha 1.3... says Quota Reached.

 

[spoiler=Full Error From Google Drive]Sorry, you can't view or download this file at this time.

 

Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator.

 

 

Can someone PM me a link to it that's not in Gno's GoogleDrive?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.