Search the Community

[ 0.000000] Linux version 5.10.55+ (root@build7) (x86_64-pc-linux-gnu-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.38) #69057 SMP Sat Sep 23 21:43:07 CST 2023 [ 0.000000] Command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000400-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb8f9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bb8fa000-0x00000000bb900fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bb901000-0x00000000bc41efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc41f000-0x00000000bc98ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bc990000-0x00000000d685ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6860000-0x00000000d68f7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d68f8000-0x00000000d6937fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6938000-0x00000000d69f7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d69f8000-0x00000000daffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '115200n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z87N-WIFI/Z87N-WIFI, BIOS F6 08/12/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3491.837 MHz processor [ 0.002198] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.009672] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.015894] last_pfn = 0x41f600 max_arch_pfn = 0x400000000 [ 0.022011] MTRR default type: uncachable [ 0.026443] MTRR fixed ranges enabled: [ 0.030613] 00000-9FFFF write-back [ 0.034625] A0000-BFFFF uncachable [ 0.038611] C0000-CFFFF write-protect [ 0.042866] D0000-DFFFF uncachable [ 0.046836] E0000-FFFFF write-protect [ 0.051065] MTRR variable ranges enabled: [ 0.055514] 0 base 0000000000 mask 7C00000000 write-back [ 0.061605] 1 base 0400000000 mask 7FE0000000 write-back [ 0.067680] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.073808] 3 base 00DC000000 mask 7FFC000000 uncachable [ 0.079866] 4 base 00DB800000 mask 7FFF800000 uncachable [ 0.085984] 5 base 041F800000 mask 7FFF800000 uncachable [ 0.092034] 6 base 041F600000 mask 7FFFE00000 uncachable [ 0.098143] 7 disabled [ 0.100950] 8 disabled [ 0.103776] 9 disabled [ 0.107149] x86/PAT: PAT support disabled because CONFIG_X86_PAT is disabled in the kernel. [ 0.119751] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.127240] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.134902] last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.163474] found SMP MP-table at [mem 0x000fd710-0x000fd71f] [ 0.169898] Using GB pages for direct mapping [ 0.228893] printk: log_buf_len: 33554432 bytes [ 0.233946] printk: early log buf free: 1044080(99%) [ 0.239423] RAMDISK: [mem 0x418c75000-0x41d3fffff] [ 0.245507] ACPI: Early table checksum verification disabled [ 0.251795] ACPI: RSDP 0x00000000D69C8000 000024 (v02 ALASKA) [ 0.258214] ACPI: XSDT 0x00000000D69C8078 000074 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.267700] ACPI: FACP 0x00000000D69D4B98 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.277173] ACPI: DSDT 0x00000000D69C8188 00CA0E (v02 ALASKA A M I 00000088 INTL 20091112) [ 0.286694] ACPI: FACS 0x00000000D69F6080 000040 [ 0.291842] ACPI: APIC 0x00000000D69D4CA8 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.301401] ACPI: FPDT 0x00000000D69D4D20 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.310874] ACPI: SSDT 0x00000000D69D4D68 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.320355] ACPI: SSDT 0x00000000D69D52A8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.329846] ACPI: MCFG 0x00000000D69D5D80 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.339405] ACPI: HPET 0x00000000D69D5DC0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.348930] ACPI: SSDT 0x00000000D69D5DF8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.358429] ACPI: SSDT 0x00000000D69D6168 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.367910] ACPI: DMAR 0x00000000D69D9650 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.377418] ACPI: Reserving FACP table memory at [mem 0xd69d4b98-0xd69d4ca3] [ 0.385243] ACPI: Reserving DSDT table memory at [mem 0xd69c8188-0xd69d4b95] [ 0.393103] ACPI: Reserving FACS table memory at [mem 0xd69f6080-0xd69f60bf] [ 0.400938] ACPI: Reserving APIC table memory at [mem 0xd69d4ca8-0xd69d4d19] [ 0.408729] ACPI: Reserving FPDT table memory at [mem 0xd69d4d20-0xd69d4d63] [ 0.416539] ACPI: Reserving SSDT table memory at [mem 0xd69d4d68-0xd69d52a0] [ 0.424399] ACPI: Reserving SSDT table memory at [mem 0xd69d52a8-0xd69d5d7f] [ 0.432217] ACPI: Reserving MCFG table memory at [mem 0xd69d5d80-0xd69d5dbb] [ 0.440087] ACPI: Reserving HPET table memory at [mem 0xd69d5dc0-0xd69d5df7] [ 0.447982] ACPI: Reserving SSDT table memory at [mem 0xd69d5df8-0xd69d6164] [ 0.455799] ACPI: Reserving SSDT table memory at [mem 0xd69d6168-0xd69d9648] [ 0.463626] ACPI: Reserving DMAR table memory at [mem 0xd69d9650-0xd69d9707] [ 0.471460] ACPI: Local APIC address 0xfee00000 [ 0.476519] No NUMA configuration found [ 0.480804] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff] [ 0.488266] NODE_DATA(0) allocated [mem 0x41d5f7000-0x41d5fafff] [ 0.495046] Zone ranges: [ 0.497850] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.504716] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.511622] Normal [mem 0x0000000100000000-0x000000041f5fffff] [ 0.518496] Movable zone start for each node [ 0.523244] Early memory node ranges [ 0.527267] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.534243] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.541211] node 0: [mem 0x0000000000100000-0x00000000bb8f9fff] [ 0.548137] node 0: [mem 0x00000000bb901000-0x00000000bc41efff] [ 0.555121] node 0: [mem 0x00000000bc990000-0x00000000d685ffff] [ 0.562073] node 0: [mem 0x00000000d68f8000-0x00000000d6937fff] [ 0.569058] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.576051] node 0: [mem 0x0000000100000000-0x000000041f5fffff] [ 0.583059] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f5fffff] [ 0.590900] On node 0 totalpages: 4151494 [ 0.595345] DMA zone: 64 pages used for memmap [ 0.600441] DMA zone: 23 pages reserved [ 0.604896] DMA zone: 3997 pages, LIFO batch:0 [ 0.610044] DMA32 zone: 13645 pages used for memmap [ 0.615676] DMA32 zone: 873257 pages, LIFO batch:63 [ 0.621302] Normal zone: 51160 pages used for memmap [ 0.627022] Normal zone: 3274240 pages, LIFO batch:63 [ 0.632858] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.632861] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.639430] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.657610] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.665890] On node 0, zone DMA32: 1393 pages in unavailable ranges [ 0.672596] On node 0, zone DMA32: 152 pages in unavailable ranges [ 0.679970] On node 0, zone DMA32: 18119 pages in unavailable ranges [ 0.737050] On node 0, zone Normal: 20480 pages in unavailable ranges [ 0.744155] On node 0, zone Normal: 2560 pages in unavailable ranges [ 0.751339] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff] [ 0.766214] ACPI: PM-Timer IO Port: 0x1808 [ 0.770764] ACPI: Local APIC address 0xfee00000 [ 0.775827] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.782423] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.790057] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.797119] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.804512] ACPI: IRQ0 used by override. [ 0.808896] ACPI: IRQ9 used by override. [ 0.813275] Using ACPI (MADT) for SMP configuration information [ 0.819835] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.825561] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later) [ 0.837315] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.842916] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.851374] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.859790] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.868194] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.876603] PM: hibernation: Registered nosave memory: [mem 0xbb8fa000-0xbb900fff] [ 0.885010] PM: hibernation: Registered nosave memory: [mem 0xbc41f000-0xbc98ffff] [ 0.893426] PM: hibernation: Registered nosave memory: [mem 0xd6860000-0xd68f7fff] [ 0.901859] PM: hibernation: Registered nosave memory: [mem 0xd6938000-0xd69f7fff] [ 0.910273] PM: hibernation: Registered nosave memory: [mem 0xd69f8000-0xdaffefff] [ 0.918682] PM: hibernation: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.927104] PM: hibernation: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.935562] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.943969] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.952376] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.960800] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.969215] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.977588] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.986029] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.994470] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 1.002886] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 1.011294] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 1.019701] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 1.028134] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 1.036568] [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 1.043391] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 1.065763] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:4 nr_node_ids:1 [ 1.074641] percpu: Embedded 53 pages/cpu s176664 r8192 d32232 u524288 [ 1.081929] pcpu-alloc: s176664 r8192 d32232 u524288 alloc=1*2097152 [ 1.089000] pcpu-alloc: [0] 0 1 2 3 [ 1.093030] Built 1 zonelists, mobility grouping on. Total pages: 4086602 [ 1.100665] Policy zone: Normal [ 1.104135] Kernel command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 1.152307] Synology Hardware Version: SA6400 [ 1.157175] Internal netif num: 2 [ 1.160984] Mac2: 94DE806D73B4 [ 1.164350] Mac1: 001132C7F4BE [ 1.167747] Serial Number: 1980PDN028952 [ 1.172135] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 1.187083] Vender format version: 2 [ 1.193870] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 1.301563] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 1.405802] mem auto-init: stack:off, heap alloc:off, heap free:off [ 1.594263] Memory: 15992372K/16605976K available (10248K kernel code, 4829K rwdata, 5800K rodata, 1344K init, 10984K bss, 613348K reserved, 0K cma-reserved) [ 1.779687] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 1.865498] ftrace: allocating 32589 entries in 128 pages [ 1.970304] ftrace: allocated 128 pages with 1 groups [ 2.036833] rcu: Hierarchical RCU implementation. [ 2.098663] rcu: RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=4. [ 2.185608] Rude variant of Tasks RCU enabled. [ 2.245096] Tracing variant of Tasks RCU enabled. [ 2.308019] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 2.408693] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 2.507776] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 2.585255] Console: colour dummy device 80x25 [ 2.643660] ACPI: Core revision 20200925 [ 2.695361] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 2.815588] APIC: Switch to symmetric I/O mode setup [ 2.880875] DMAR: Host address width 39 [ 2.931211] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 3.001005] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 3.105102] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 3.174893] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 3.278994] DMAR: RMRR base: 0x000000dae83000 end: 0x000000dae91fff [ 3.361365] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 3.443736] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 3.527247] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 3.598177] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 3.712317] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 3.783293] x2apic enabled [ 3.818764] Switched APIC routing to cluster x2apic. [ 3.884855] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 3.968584] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325531ed3c7, max_idle_ns: 440795306136 ns [ 4.107057] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.67 BogoMIPS (lpj=3491837) [ 4.108059] pid_max: default: 32768 minimum: 301 [ 4.109098] LSM: Security Framework initializing [ 4.110098] AppArmor: AppArmor initialized [ 4.111133] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 4.112124] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 4.113636] mce: CPU0: Thermal monitoring enabled (TM1) [ 4.114094] process: using mwait in idle threads [ 4.115063] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 4.116058] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 4.117062] Speculative Store Bypass: Vulnerable [ 4.118059] SRBDS: Vulnerable: No microcode [ 4.120357] Freeing SMP alternatives memory: 32K [ 4.224117] smpboot: CPU0: Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 4.225312] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 4.226060] ... version: 3 [ 4.227058] ... bit width: 48 [ 4.228058] ... generic registers: 8 [ 4.229059] ... value mask: 0000ffffffffffff [ 4.230058] ... max period: 00007fffffffffff [ 4.231057] ... fixed-purpose events: 3 [ 4.232058] ... event mask: 00000007000000ff [ 4.233341] rcu: Hierarchical SRCU implementation. [ 4.235692] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 4.236173] smp: Bringing up secondary CPUs ... [ 4.237235] x86: Booting SMP configuration: [ 4.238061] .... node #0, CPUs: #1 #2 #3 [ 4.242684] smp: Brought up 1 node, 4 CPUs [ 4.244059] smpboot: Max logical packages: 1 [ 4.245062] smpboot: Total of 4 processors activated (27934.69 BogoMIPS) [ 4.248271] devtmpfs: initialized [ 4.250246] random: get_random_u32 called from bucket_table_alloc.isra.0+0x6e/0x160 with crng_init=0 [ 4.250269] PM: Registering ACPI NVS region [mem 0xbb8fa000-0xbb900fff] (28672 bytes) [ 4.252062] PM: Registering ACPI NVS region [mem 0xd6938000-0xd69f7fff] (786432 bytes) [ 4.253181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 4.254066] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 4.255161] pinctrl core: initialized pinctrl subsystem [ 4.257296] NET: Registered protocol family 16 [ 4.258278] audit: initializing netlink subsys (disabled) [ 4.259077] audit: type=2000 audit(1700666646.171:1): state=initialized audit_enabled=0 res=1 [ 4.260146] thermal_sys: Registered thermal governor 'step_wise' [ 4.261124] cpuidle: using governor ladder [ 4.393078] cpuidle: using governor menu [ 4.445164] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 4.544064] ACPI: bus type PCI registered [ 4.597059] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 4.682214] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 4.804063] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 4.894073] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 5.031190] PCI: Using configuration type 1 for base access [ 5.104203] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 5.200826] Kprobes globally optimized [ 5.251114] ACPI: Added _OSI(Module Device) [ 5.306084] ACPI: Added _OSI(Processor Device) [ 5.364059] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.426062] ACPI: Added _OSI(Processor Aggregator Device) [ 5.497059] ACPI: Added _OSI(Linux-Dell-Video) [ 5.555061] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 5.625059] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 5.715110] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 5.801591] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 5.883058] ACPI: Dynamic OEM Table Load: [ 5.936068] ACPI: SSDT 0xFFFF888100AEF400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 6.050062] ACPI: Dynamic OEM Table Load: [ 6.102067] ACPI: SSDT 0xFFFF888100AA4000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 6.216119] ACPI: Dynamic OEM Table Load: [ 6.269064] ACPI: SSDT 0xFFFF88810106A600 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 6.384635] ACPI: Interpreter enabled [ 6.433096] ACPI: (supports S0 S4 S5) [ 6.481059] ACPI: Using IOAPIC for interrupt routing [ 6.547058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 6.667100] ACPI: Enabled 7 GPEs in block 00 to 3F [ 6.752102] ACPI: Power Resource [FN00] (off) [ 6.810258] ACPI: Power Resource [FN01] (off) [ 6.867257] ACPI: Power Resource [FN02] (off) [ 6.925081] ACPI: Power Resource [FN03] (off) [ 6.982249] ACPI: Power Resource [FN04] (off) [ 7.041060] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 7.122075] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 7.242062] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 7.337395] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 7.429063] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 7.537104] PCI host bridge to bus 0000:00 [ 7.591068] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 7.680060] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 7.769062] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 7.868059] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 7.966062] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 8.065059] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 8.163061] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 8.261060] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 8.360062] pci_bus 0000:00: root bus resource [bus 00-3e] [ 8.432086] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 8.511296] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 8.590081] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 8.679076] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 8.774068] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 8.848313] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 8.927076] pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit] [ 9.016345] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 9.095086] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit] [ 9.185167] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 9.261183] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 9.340089] pci 0000:00:16.0: reg 0x10: [mem 0xf7e3f000-0xf7e3f00f 64bit] [ 9.430161] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 9.510241] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 9.589080] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff] [ 9.672058] pci 0000:00:19.0: reg 0x14: [mem 0xf7e3d000-0xf7e3dfff] [ 9.754070] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 9.827155] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 9.907141] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 9.986084] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e3c000-0xf7e3c3ff] [ 10.069186] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 10.149268] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 10.228082] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit] [ 10.318062] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 10.398264] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 10.477188] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 10.557098] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 10.619129] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 10.707469] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 10.786199] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 10.867099] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 10.929124] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 11.017350] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 11.096189] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 11.176097] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 11.238071] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 11.327081] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 11.406085] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff] [ 11.488192] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 11.569290] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 11.648323] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 11.727083] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 11.800073] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 11.873073] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 11.947069] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 12.020071] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 12.093070] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff] [ 12.176124] pci 0000:00:1f.2: PME# supported from D3hot [ 12.244259] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 12.323089] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit] [ 12.413090] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 12.486401] acpiphp: Slot [1] registered [ 12.538069] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 12.603202] pci 0000:02:00.0: [1969:1091] type 00 class 0x020000 [ 12.682102] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d3ffff 64bit] [ 12.772075] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f] [ 12.845232] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 12.932280] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 12.998067] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 13.078063] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 13.167216] pci 0000:03:00.0: [8086:0887] type 00 class 0x028000 [ 13.246103] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit] [ 13.336064] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 13.416177] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 13.481069] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 13.572479] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 13.675184] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 13.781102] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 13.884162] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 13.987158] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15), disabled. [ 14.090161] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 14.195157] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15), disabled. [ 14.298160] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 14.402772] iommu: Default domain type: Passthrough (set via kernel command line) [ 14.501114] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 14.502055] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 14.692071] pci 0000:00:02.0: vgaarb: bridge control possible [ 14.768059] vgaarb: loaded [ 14.803189] SCSI subsystem initialized [ 14.852104] libata version 3.00 loaded. [ 14.903125] pps_core: LinuxPPS API ver. 1 registered [ 14.968058] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 15.088069] PTP clock support registered [ 15.140102] EDAC MC: Ver: 3.0.0 [ 15.181459] PCI: Using ACPI for IRQ routing [ 15.239197] PCI: pci_cache_line_size set to 64 bytes [ 15.304135] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 15.383060] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 15.462062] e820: reserve RAM buffer [mem 0xbb8fa000-0xbbffffff] [ 15.541062] e820: reserve RAM buffer [mem 0xbc41f000-0xbfffffff] [ 15.620065] e820: reserve RAM buffer [mem 0xd6860000-0xd7ffffff] [ 15.699060] e820: reserve RAM buffer [mem 0xd6938000-0xd7ffffff] [ 15.778062] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 15.857062] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff] [ 15.938161] clocksource: Switched to clocksource tsc-early [ 16.042098] VFS: Disk quotas dquot_6.6.0 [ 16.093681] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.184332] AppArmor: AppArmor Filesystem Enabled [ 16.246207] pnp: PnP ACPI init [ 16.286483] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 16.373443] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 16.463086] system 00:01: [io 0x0680-0x069f] has been reserved [ 16.540868] system 00:01: [io 0xffff] has been reserved [ 16.610648] system 00:01: [io 0xffff] has been reserved [ 16.680436] system 00:01: [io 0xffff] has been reserved [ 16.750219] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 16.828019] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 16.905807] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 16.983602] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 17.061394] system 00:01: [io 0x1800-0x18fe] has been reserved [ 17.139189] system 00:01: [io 0x164e-0x164f] has been reserved [ 17.216994] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 17.306280] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 17.392243] system 00:03: [io 0x1854-0x1857] has been reserved [ 17.470037] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 17.568737] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 17.646519] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 17.724304] system 00:04: [io 0x0a20-0x0a2f] has been reserved [ 17.802112] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 17.891871] pnp 00:05: [dma 0 disabled] [ 17.942309] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 18.028224] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 18.106013] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 18.196171] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 18.283116] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 18.370055] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 18.457004] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 18.543947] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 18.630896] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 18.717840] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 18.809365] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 18.896308] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 18.983257] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 19.074777] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 19.161725] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 19.248681] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 19.338449] pnp: PnP ACPI: found 8 devices [ 19.400792] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 19.517582] NET: Registered protocol family 2 [ 19.575279] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 19.681700] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 19.795052] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 19.901843] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 19.999415] TCP: Hash tables configured (established 131072 bind 65536) [ 20.086469] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 20.175826] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 20.270944] NET: Registered protocol family 1 [ 20.328246] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 20.393544] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 20.458743] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 20.538822] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 20.628069] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 20.693265] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 20.782509] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 20.863721] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 20.944950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 21.035324] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 21.125710] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 21.216081] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 21.306462] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 21.397980] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window] [ 21.489506] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 21.562720] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 21.645093] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 21.727665] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 21.837507] pci 0000:00:02.0: pci_fixup_video+0x0/0xb0 took 107262 usecs [ 21.926759] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag [ 22.000081] pci 0000:02:00.0: quirk_msi_intx_disable_qca_bug+0x0/0x10 took 71596 usecs [ 22.104272] PCI: CLS 64 bytes, default 64 [ 26.858187] Trying to unpack rootfs image as initramfs... [ 27.012029] Freeing initrd memory: 73260K [ 27.064716] DMAR: No ATSR found [ 27.106021] DMAR: dmar0: Using Queued invalidation [ 27.168998] DMAR: dmar1: Using Queued invalidation [ 27.513566] pci 0000:00:00.0: Adding to iommu group 0 [ 27.580018] pci 0000:00:02.0: Adding to iommu group 1 [ 27.646469] pci 0000:00:03.0: Adding to iommu group 2 [ 27.712817] pci 0000:00:14.0: Adding to iommu group 3 [ 27.779178] pci 0000:00:16.0: Adding to iommu group 4 [ 27.845628] pci 0000:00:19.0: Adding to iommu group 5 [ 27.911981] pci 0000:00:1a.0: Adding to iommu group 6 [ 27.978335] pci 0000:00:1b.0: Adding to iommu group 7 [ 28.044690] pci 0000:00:1c.0: Adding to iommu group 8 [ 28.111044] pci 0000:00:1c.3: Adding to iommu group 9 [ 28.177397] pci 0000:00:1c.4: Adding to iommu group 10 [ 28.244895] pci 0000:00:1d.0: Adding to iommu group 11 [ 28.312411] pci 0000:00:1f.0: Adding to iommu group 12 [ 28.379994] pci 0000:00:1f.2: Adding to iommu group 12 [ 28.447489] pci 0000:00:1f.3: Adding to iommu group 12 [ 28.514990] pci 0000:02:00.0: Adding to iommu group 13 [ 28.582484] pci 0000:03:00.0: Adding to iommu group 14 [ 28.650065] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 28.734724] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 28.819387] software IO TLB: mapped [mem 0x00000000d2860000-0x00000000d6860000] (64MB) [ 28.923631] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 29.027812] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 29.103308] RAPL PMU: hw unit of domain package 2^-14 Joules [ 29.177671] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 29.248598] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 29.325974] Initialise system trusted keyrings [ 29.415843] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 29.505227] Key type asymmetric registered [ 29.559047] Asymmetric key parser 'x509' registered [ 29.623135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 29.720354] io scheduler mq-deadline registered [ 29.779842] io scheduler kyber registered [ 29.832535] io scheduler bfq registered [ 29.885172] Monitor-Mwait will be used to enter C-1 state [ 29.956282] Monitor-Mwait will be used to enter C-2 state [ 30.027307] ACPI: \_PR_.CPU0: Found 2 idle states [ 30.089768] ACPI: \_PR_.CPU1: Found 2 idle states [ 30.152042] ACPI: \_PR_.CPU2: Found 2 idle states [ 30.214337] ACPI: \_PR_.CPU3: Found 2 idle states [ 30.359094] tsc: Refined TSC clocksource calibration: 3491.912 MHz [ 30.440381] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3255787006b, max_idle_ns: 440795244845 ns [ 31.041789] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 31.125433] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 31.227277] printk: console [ttyS0] enabled [ 31.236245] printk: bootconsole [uart8250] disabled [ 31.423005] clocksource: Switched to clocksource tsc [ 31.430954] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 31.437773] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 31.462712] brd: module loaded [ 31.465961] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200925/utaddress-204) [ 31.481682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.491960] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.507546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.517828] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204) [ 31.533445] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.548998] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.559349] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204) [ 31.574954] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.590477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.600765] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 31.607168] Loading iSCSI transport class v2.0-870. [ 31.627149] rdac: device handler registered [ 31.646050] i2c /dev entries driver [ 31.649684] ahci 0000:00:1f.2: version 3.0 [ 31.654283] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 31.662486] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 31.669875] Cannot find slot node of this ata_port. [ 31.674838] Cannot find slot node of this ata_port. [ 31.694511] scsi host0: ahci [ 31.717114] scsi host1: ahci [ 31.726863] scsi host2: ahci [ 31.730660] scsi host3: ahci [ 31.734317] scsi host4: ahci [ 31.741653] scsi host5: ahci [ 31.744779] ata1 : SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 29 [ 31.752375] ata2 : SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a180 irq 29 [ 31.759910] ata3 : DUMMY [ 31.762480] ata4 : DUMMY [ 31.765038] ata5 : DUMMY [ 31.767604] ata6 : DUMMY [ 31.770268] ata3 : port disabled [ 31.770376] ata4 : port disabled [ 31.771803] NET: Registered protocol family 17 [ 31.771823] Key type dns_resolver registered [ 31.772068] ata5 : port disabled [ 31.772073] Invalid parameter [ 31.772159] ata6 : port disabled [ 31.772164] Invalid parameter [ 31.773571] Invalid parameter [ 31.801193] Invalid parameter [ 31.804824] IPI shorthand broadcast: enabled [ 31.809183] sched_clock: Marking stable (30306208278, 1502954689)->(34868485575, -3059322608) [ 31.817937] registered taskstats version 1 [ 31.822111] Loading compiled-in X.509 certificates [ 31.827038] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 31.840081] redpill: loading out-of-tree module taints kernel. [ 31.846100] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 32.076409] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 32.083020] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 32.090929] ata2.00: ATA-9: ADATA SP600, 2.3, max UDMA/100 [ 32.096510] ata2.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 32.103390] ata2.00: SN:03912202500600000028 [ 32.107753] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 32.114533] ata1.00: ATA-9: ADATA SP600, 2.9, max UDMA/100 [ 32.120137] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 32.120877] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 32.127003] ata1.00: SN:2E3520001576 [ 32.127072] ata2.00: configured for UDMA/100 [ 32.137262] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 32.140843] Invalid parameter [ 32.145173] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 32.157227] ata1.00: configured for UDMA/100 [ 32.159840] page_owner is disabled [ 32.169751] Invalid parameter [ 32.174100] AppArmor: AppArmor sha1 policy hashing enabled [ 32.177543] ata1.00: Find SSD disks. [ADATA SP600] [ 32.191217] scsi 0:0:0:0: Direct-Access ADATA SP600 2.9 PQ: 0 ANSI: 5 [ 32.200363] sd 0:0:0:0: got sata disk[0] [ 32.200467] ata2.00: Find SSD disks. [ADATA SP600] [ 32.204552] sd 0:0:0:0: [sata1] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 32.209405] scsi 1:0:0:0: Direct-Access ADATA SP600 2.3 PQ: 0 ANSI: 5 [ 32.217073] sd 0:0:0:0: [sata1] Write Protect is off [ 32.226213] sd 1:0:0:0: got sata disk[1] [ 32.231008] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 10 [ 32.231114] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 32.235247] sd 1:0:0:0: [sata2] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 32.256981] sd 1:0:0:0: [sata2] Write Protect is off [ 32.257833] sata1: p1 p2 p3 < p5 > [ 32.262005] sd 1:0:0:0: [sata2] Mode Sense: 00 3a 00 10 [ 32.266385] sd 0:0:0:0: [sata1] Attached SCSI disk [ 32.270920] sd 1:0:0:0: [sata2] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 32.291920] sata2: p1 p2 [ 32.295871] sd 1:0:0:0: [sata2] Attached SCSI disk [ 32.305701] Freeing unused kernel image (initmem) memory: 1344K [ 32.318469] Write protecting the kernel read-only data: 18432k [ 32.325473] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 32.332400] Freeing unused kernel image (rodata/data gap) memory: 344K [ 32.339001] rodata_test: all tests were successful [ 32.343855] Run /init as init process [ 32.347551] with arguments: [ 32.350540] /init [ 32.352838] withefi [ 32.355315] DiskIdxMap [ 32.358030] sataboot2 [ 32.360673] SataPortMap [ 32.363498] with environment: [ 32.366678] HOME=/ [ 32.369062] TERM=linux [ 32.371808] pid=0x5583 [ 32.374554] syno_port_thaw=1 [ 32.377814] SasIdxMap=0 [ 32.380649] vid=0x0781 [ 32.383387] HddHotplug=0 [ 32.386326] syno_hdd_detect=0 [ 32.389695] syno_hdd_powerup_seq=0 [ 32.894082] random: crng init done [ 33.066908] ACPI: bus type USB registered [ 33.071043] usbcore: registered new interface driver usbfs [ 33.076657] usbcore: registered new interface driver hub [ 33.082064] usbcore: registered new device driver usb [ 33.141176] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 33.146503] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 33.155122] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009010 [ 33.164361] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 33.171902] hub 1-0:1.0: USB hub found [ 33.175745] hub 1-0:1.0: 14 ports detected [ 33.184702] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 33.190049] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 33.197538] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 33.203942] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 33.212593] hub 2-0:1.0: USB hub found [ 33.216442] hub 2-0:1.0: 6 ports detected [ 33.457092] usb 1-11: new full-speed USB device number 2 using xhci_hcd [ 33.615666] Got empty serial number. Generate serial number from product. [ 33.748139] usb 2-5: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 38.270083] DMABUF-COMPAT BACKPORTED INIT [ 38.275337] DMAHEAP BACKPORTED INIT [ 38.280228] Loading dma-buf modules backported from I915-23.8.20 [ 38.287669] DMA BUF backport generated by backports.git RHEL_88_23.8.20_PSB_230810.24 [ 38.300135] [drm] DRM BACKPORTED INIT [ 38.307277] [drm] DRM_KMS_HELPER BACKPORTED INIT [ 38.313629] I915 COMPAT BACKPORTED INIT [ 38.318976] Loading I915 modules backported from I915-23.8.20 [ 38.326187] I915 Backport generated by backports.git RHEL_88_23.8.20_PSB_230810.24 [ 38.356418] [drm] I915 BACKPORTED INIT [ 38.362040] i915 0000:00:02.0: [drm] GT count: 1, enabled: 1 [ 38.368656] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 38.376268] type mismatch for e0000000,10000000 old: write-back new: write-combining [ 38.384996] Failed to add WC MTRR for [00000000bec5d527-00000000ac95f8d5]; performance may suffer. [ 38.385042] i915 0000:00:02.0: [drm] Transparent Hugepage support is recommended for optimal performance when IOMMU is enabled! [ 38.407012] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory [ 38.417437] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 38.442136] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 38.450485] #PF: supervisor instruction fetch in kernel mode [ 38.456171] #PF: error_code(0x0010) - not-present page [ 38.462750] PGD 0 P4D 0 [ 38.465317] Oops: 0010 [#1] SMP NOPTI [ 38.469035] CPU: 1 PID: 4450 Comm: modprobe Tainted: G OE 5.10.55+ #69057 [ 38.477136] Hardware name: Gigabyte Technology Co., Ltd. Z87N-WIFI/Z87N-WIFI, BIOS F6 08/12/2014 [ 38.486024] RIP: 0010:0x0 [ 38.488683] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 38.495622] RSP: 0018:ffffc9000064f9f8 EFLAGS: 00010246 [ 38.500909] RAX: 0000000000000000 RBX: ffff88810f7d0000 RCX: 0000000000001000 [ 38.508101] RDX: ffff888101153c00 RSI: 0000000000000527 RDI: ffff88810f7d0000 [ 38.515302] RBP: 0000000000000000 R08: 000000ffffffffff R09: 0000000000000000 [ 38.522512] R10: 0000000101aebfff R11: 0000000000000000 R12: ffff88810f7d01c0 [ 38.529716] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000400 [ 38.536926] FS: 00007f4b7c453740(0000) GS:ffff888401a80000(0000) knlGS:0000000000000000 [ 38.545064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.550888] CR2: ffffffffffffffd6 CR3: 000000010f4be002 CR4: 00000000001706e0 [ 38.558099] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 38.565302] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 38.572503] Call Trace: [ 38.575203] [<ffffffffa0281df5>] vma_get_pages+0x95/0x130 [i915] [ 38.582755] [<ffffffffa0284360>] ? i915_vma_pin_ww+0x370/0x9e0 [i915] [ 38.590526] [<ffffffff81226992>] ? __kmalloc+0x142/0x2e0 [ 38.596166] [<ffffffffa0284b24>] ? i915_ggtt_pin_for_gt+0x154/0x200 [i915] [ 38.604560] [<ffffffffa0218a5b>] ? intel_gt_init+0xab/0x930 [i915] [ 38.612298] [<ffffffffa01dde6e>] ? fwtable_read32+0x8e/0x210 [i915] [ 38.620072] [<ffffffffa01dd819>] ? gen6_write32+0x59/0x1e0 [i915] [ 38.627761] [<ffffffffa02772f8>] ? i915_gem_init+0x208/0x280 [i915] [ 38.635535] [<ffffffffa01b3a24>] ? i915_driver_probe+0x14f4/0x1d70 [i915] [ 38.643740] [<ffffffff8145360f>] ? create_pinctrl+0x2f/0x430 [ 38.649691] [<ffffffffa01c179b>] ? i915_pci_probe+0x9b/0x3d0 [i915] [ 38.657358] [<ffffffff8147062e>] ? local_pci_probe+0x3e/0x70 [ 38.663149] [<ffffffff814716f1>] ? pci_device_probe+0xd1/0x180 [ 38.669126] [<ffffffff81533c4d>] ? really_probe+0xed/0x420 [ 38.674783] [<ffffffff8153424e>] ? driver_probe_device+0x4e/0xa0 [ 38.680919] [<ffffffff81534521>] ? device_driver_attach+0xa1/0xb0 [ 38.687183] [<ffffffff81534530>] ? device_driver_attach+0xb0/0xb0 [ 38.693431] [<ffffffff815345a2>] ? __driver_attach+0x72/0x100 [ 38.699308] [<ffffffff81534530>] ? device_driver_attach+0xb0/0xb0 [ 38.705548] [<ffffffff81531aa1>] ? bus_for_each_dev+0x61/0x90 [ 38.711458] [<ffffffff81532faf>] ? bus_add_driver+0x10f/0x1c0 [ 38.717352] [<ffffffff81534e59>] ? driver_register+0x89/0xd0 [ 38.723329] [<ffffffffa047c033>] ? __init_backport+0x33/0x8c [i915] [ 38.730959] [<ffffffffa047c000>] ? 0xffffffffa047c000 [ 38.736151] [<ffffffff81000bfd>] ? do_one_initcall+0x3d/0x1c0 [ 38.742043] [<ffffffff810ff5d2>] ? do_init_module+0x22/0x250 [ 38.747869] [<ffffffff81227b5e>] ? kmem_cache_alloc_trace+0x12e/0x2a0 [ 38.754453] [<ffffffff810ff60a>] ? do_init_module+0x5a/0x250 [ 38.760268] [<ffffffff811023f8>] ? __do_sys_finit_module+0x88/0xb0 [ 38.766627] [<ffffffff81787853>] ? do_syscall_64+0x33/0x40 [ 38.772267] [<ffffffff8180007c>] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 38.779379] Modules linked in: i915(OE+) i2c_algo_bit i915_compat(OE) drm_mipi_dsi(OE) intel_gtt(OE) drm_kms_helper(OE) drm(OE) drm_panel_orientation_quirks(OE) hdmi(OE) dmabuf(OE) xhci_pci xhci_hcd usbcore usb_common [ 38.800237] CR2: 0000000000000000 [ 38.803619] ---[ end trace 5e832f8482f0d9cf ]--- [ 38.808637] RIP: 0010:0x0 [ 38.811294] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 38.818217] RSP: 0018:ffffc9000064f9f8 EFLAGS: 00010246 [ 38.823485] RAX: 0000000000000000 RBX: ffff88810f7d0000 RCX: 0000000000001000 [ 38.830668] RDX: ffff888101153c00 RSI: 0000000000000527 RDI: ffff88810f7d0000 [ 38.837872] RBP: 0000000000000000 R08: 000000ffffffffff R09: 0000000000000000 [ 38.845082] R10: 0000000101aebfff R11: 0000000000000000 R12: ffff88810f7d01c0 [ 38.852283] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000400 [ 38.859505] FS: 00007f4b7c453740(0000) GS:ffff888401a80000(0000) knlGS:0000000000000000 [ 38.867711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.873526] CR2: ffffffffffffffd6 CR3: 000000010f4be002 CR4: 00000000001706e0 [ 38.880729] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 38.887957] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 40.002725] e1000e: Intel(R) PRO/1000 Network Driver [ 40.007740] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 40.014090] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 40.104357] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 40.196228] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 94:de:80:6d:73:b4 [ 40.204249] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 40.211206] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 42.441356] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel) [ 43.488442] alx 0000:02:00.0 eth1: Qualcomm Atheros AR816x/AR817x Ethernet [00:11:32:c7:f4:be] [ 43.921881] synobios open /dev/ttyS1 success [ 43.926217] Fail to get disk 1 led type [ 43.930084] Fail to get disk 2 led type [ 43.933982] Fail to get disk 3 led type [ 43.937856] Fail to get disk 4 led type [ 43.941730] Fail to get disk 5 led type [ 43.945614] Fail to get disk 6 led type [ 43.949506] Fail to get disk 7 led type [ 43.953404] Fail to get disk 8 led type [ 43.957295] Fail to get disk 9 led type [ 43.961176] Fail to get disk 10 led type [ 43.965148] Fail to get disk 11 led type [ 43.969126] Fail to get disk 12 led type [ 43.973140] 2023-11-22 15:24:50 UTC [ 43.976667] synobios: load, major number 201 [ 43.981004] Brand: Synology [ 43.983844] Model: SA-6400 [ 43.986584] synobios cpu_arch proc entry initialized [ 43.991599] synobios crypto_hw proc entry initialized [ 43.996696] synobios syno_platform proc entry initialized [ 44.013547] Module [epyc7002_synobios] is removed. [ 44.018527] synobios: unload [ 44.765760] md: md0 stopped. [ 44.770835] md: kicking non-fresh sata2p1 from array! [ 44.783741] md/raid1:md0: active with 1 out of 4 mirrors [ 44.791758] md0: detected capacity change from 0 to 8589869056 [ 45.463459] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 45.550406] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 45.787931] Module [r8168] is removed. [ 46.005574] loop: module loaded [ 49.300658] Module [rp] is removed. [ 49.497821] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 49.571437] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 49.571441] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.580105] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.593332] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 49.602500] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.611089] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.720133] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 53.346840] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 53.346845] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 53.356463] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 53.495386] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 53.522178] systemd[1]: Detected architecture x86-64. [ 53.527668] systemd[1]: Set hostname to <SA6400>. [ 55.691746] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 55.745024] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked. [ 55.759345] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked. [ 55.774547] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked. [ 55.787073] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory. [ 55.805231] systemd[1]: Cannot add dependency job for unit pkg-synorelayd-reload-fixed-package-config.service, ignoring: Unit synorelayd.service failed to load: No such file or directory. [ 55.822149] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory. [ 55.941782] zram: Added device: zram0 [ 55.950711] zram: Added device: zram1 [ 55.951112] systemd-journald[6879]: Received request to flush runtime journal from PID 1 [ 55.962014] zram: Added device: zram2 [ 55.975264] zram: Added device: zram3 [ 55.975518] cryptd: max_cpu_qlen set to 1000 [ 56.009856] AVX2 version of gcm_enc/dec engaged. [ 56.015597] AES CTR mode by8 optimization enabled [ 56.064282] md: md1 stopped. [ 56.071298] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 56.084383] md/raid1:md1: active with 1 out of 4 mirrors [ 56.095911] NET: Registered protocol family 10 [ 56.102151] Segment Routing with IPv6 [ 56.102297] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2023-09-23-22:10-debug initialized [ 56.106474] md1: detected capacity change from 0 to 2147418112 [ 56.136840] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 56.188835] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 56.195260] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 56.224576] Intel(R) Gigabit Ethernet Linux Driver - version 5.4.6 [ 56.231733] Copyright(c) 2007 - 2020 Intel Corporation. [ 56.262695] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.9.4 [ 56.270434] Copyright(c) 1999 - 2020 Intel Corporation. [ 56.283148] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 56.297401] zram0: detected capacity change from 0 to 2468347904 [ 56.318106] Adding 2410492k swap on /dev/zram0. Priority:1 extents:1 across:2410492k SS [ 56.330790] zram1: detected capacity change from 0 to 2468347904 [ 56.354163] Adding 2410492k swap on /dev/zram1. Priority:1 extents:1 across:2410492k SS [ 56.366819] zram2: detected capacity change from 0 to 2468347904 [ 56.405165] Adding 2410492k swap on /dev/zram2. Priority:1 extents:1 across:2410492k SS [ 56.416844] zram3: detected capacity change from 0 to 2468347904 [ 56.479964] qed_init called [ 56.483764] QLogic FastLinQ 4xxxx Core Module qed 8.59.6.0 [ 56.490725] creating debugfs root node [ 56.508692] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.59.6.0 [ 56.518129] Adding 2410492k swap on /dev/zram3. Priority:1 extents:1 across:2410492k SS [ 56.570840] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.715.8 ($DateTime: 2020/08/17 18:31:34 $) [ 56.581469] creating debugfs root node [ 56.740029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 56.748574] ehci-pci: EHCI PCI platform driver [ 56.753350] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 56.758656] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 56.766114] ehci-pci 0000:00:1a.0: debug port 2 [ 56.774635] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 56.781536] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3c000 [ 56.795090] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 56.801347] hub 3-0:1.0: USB hub found [ 56.805199] hub 3-0:1.0: 2 ports detected [ 56.809991] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 56.815296] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 56.822820] ehci-pci 0000:00:1d.0: debug port 2 [ 56.831306] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 56.838209] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e3b000 [ 56.850090] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 56.856347] hub 4-0:1.0: USB hub found [ 56.860164] hub 4-0:1.0: 2 ports detected [ 56.867917] uhci_hcd: USB Universal Host Controller Interface driver [ 56.919905] synobios open /dev/ttyS1 success [ 56.925683] Fail to get disk 1 led type [ 56.930962] Fail to get disk 2 led type [ 56.930964] Fail to get disk 3 led type [ 56.930971] Fail to get disk 4 led type [ 56.946798] Fail to get disk 5 led type [ 56.952096] Fail to get disk 6 led type [ 56.957375] Fail to get disk 7 led type [ 56.962620] Fail to get disk 8 led type [ 56.962622] Fail to get disk 9 led type [ 56.962624] Fail to get disk 10 led type [ 56.962630] Fail to get disk 11 led type [ 56.981062] Fail to get disk 12 led type [ 56.985110] 2023-11-22 15:25:3 UTC [ 56.989861] synobios: load, major number 201 [ 56.995575] Brand: Synology [ 56.999783] Model: SA-6400 [ 56.999793] synobios cpu_arch proc entry initialized [ 57.008936] synobios crypto_hw proc entry initialized [ 57.014053] synobios syno_platform proc entry initialized [ 57.095088] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 57.117095] usb-storage 2-5:1.0: USB Mass Storage device detected [ 57.123596] scsi host6: usb-storage 2-5:1.0 [ 57.128026] usbcore: registered new interface driver usb-storage [ 57.135093] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 57.145762] usbcore: registered new interface driver uas [ 57.254449] Got empty serial number. Generate serial number from product. [ 57.262186] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 [ 57.581794] hub 3-1:1.0: USB hub found [ 57.585728] hub 3-1:1.0: 6 ports detected [ 57.589800] Got empty serial number. Generate serial number from product. [ 57.597484] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 [ 57.607718] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa1 [ 57.618270] hub 4-1:1.0: USB hub found [ 57.622201] hub 4-1:1.0: 8 ports detected [ 57.908805] Module [adt7475] is removed. [ 57.919183] Module [hwmon_vid] is removed. [ 58.137477] scsi 6:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 58.146654] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 58.147084] sd 6:0:0:0: [synoboot] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 58.161159] sd 6:0:0:0: [synoboot] Write Protect is off [ 58.166454] sd 6:0:0:0: [synoboot] Mode Sense: 43 00 00 00 [ 58.172459] sd 6:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 58.196004] synoboot: synoboot1 synoboot2 synoboot3 [ 58.203013] sd 6:0:0:0: [synoboot] Attached SCSI removable disk [ 59.934465] alx 0000:02:00.0 eth1: NIC Up: 1 Gbps Full [ 59.939924] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 59.972117] Module [adt7475] is removed. [ 60.063404] Module [hwmon_vid] is removed. [ 60.473001] ext2: synoboot2 mounted, process=synoencvolume [ 60.481681] ext4: synoboot2 mounted, process=synoencvolume [ 60.512786] vfat: synoboot2 mounted, process=synoencvolume [ 60.548190] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 60.560842] synoboot2 unmounted, process=synoencvolume [ 61.171320] 8021q: 802.1Q VLAN Support v1.8 [ 61.454819] md: md2 stopped. [ 61.484101] md/raid1:md2: active with 1 out of 1 mirrors [ 61.492390] md2: detected capacity change from 0 to 21030961152 [ 62.143204] Module [adt7475] is removed. [ 62.159280] Module [hwmon_vid] is removed. [ 65.645110] flashcache_syno: /dev/vg1/volume_1 exclude check success [ 66.785068] raid6: avx2x4 gen() 7478 MB/s [ 66.806065] raid6: avx2x4 xor() 3991 MB/s [ 66.827066] raid6: avx2x2 gen() 7145 MB/s [ 66.848065] raid6: avx2x2 xor() 4395 MB/s [ 66.869067] raid6: avx2x1 gen() 6675 MB/s [ 66.890064] raid6: avx2x1 xor() 4048 MB/s [ 66.911069] raid6: sse2x4 gen() 3865 MB/s [ 66.932068] raid6: sse2x4 xor() 2426 MB/s [ 66.953066] raid6: sse2x2 gen() 4092 MB/s [ 66.974065] raid6: sse2x2 xor() 2447 MB/s [ 66.995068] raid6: sse2x1 gen() 3309 MB/s [ 67.016067] raid6: sse2x1 xor() 2173 MB/s [ 67.020398] raid6: using algorithm avx2x4 gen() 7478 MB/s [ 67.025863] raid6: .... xor() 3991 MB/s, rmw enabled [ 67.030874] raid6: using avx2x2 recovery algorithm [ 67.037807] xor: automatically using best checksumming function avx [ 67.166592] Btrfs loaded, crc32c=crc32c-intel [ 68.350853] BTRFS: device label 2023.11.21-13:13:28 v69057 devid 1 transid 63 /dev/mapper/cachedev_0 scanned by mount (10695) [ 68.362892] BTRFS info (device dm-2): enabling auto syno reclaim space [ 68.369524] BTRFS info (device dm-2): enabling ssd optimizations [ 68.375612] BTRFS info (device dm-2): using free space tree [ 68.381264] BTRFS info (device dm-2): using block group cache tree [ 68.387548] BTRFS info (device dm-2): has skinny extents [ 68.398427] BTRFS info (device dm-2): root of syno feature tree is null [ 71.582720] Synotify use 16384 event queue size [ 71.587781] Synotify use 16384 event queue size [ 72.087538] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 72.732471] ata1.00: configured for UDMA/100 [ 72.736798] ata1 : EH complete [ 72.739896] Invalid parameter [ 72.903216] ext2: synoboot2 mounted, process=synopkicompatsy [ 72.915727] ext4: synoboot2 mounted, process=synopkicompatsy [ 72.922754] vfat: synoboot2 mounted, process=synopkicompatsy [ 72.959588] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 72.975144] synoboot2 unmounted, process=synopkicompatsy [ 74.288639] ata2.00: configured for UDMA/100 [ 74.292985] ata2 : EH complete [ 74.296071] Invalid parameter [ 87.493354] iSCSI:target_core_rodsp_server.c:1008:rodsp_server_init RODSP server started, login_key(213ba3a11353). [ 88.568726] syno_extent_pool: module license 'Proprietary' taints kernel. [ 88.583112] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 88.657758] iSCSI:target_core_device.c:593:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 88.669862] iSCSI:target_core_configfs.c:6124:target_init_dbroot db_root: cannot open: /etc/target [ 88.679873] iSCSI:target_core_lunbackup.c:367:init_io_buffer_head 2048 buffers allocated, total 8388608 bytes successfully [ 89.873980] iSCSI:target_core_file.c:128:fd_attach_hba RODSP plugin for fileio is enabled. [ 89.882341] iSCSI:target_core_file.c:136:fd_attach_hba ODX Token Manager is enabled. [ 89.890200] iSCSI:target_core_multi_file.c:126:fd_attach_hba RODSP plugin for multifile is enabled. [ 89.899348] iSCSI:target_core_multi_file.c:134:fd_attach_hba ODX Token Manager is enabled. [ 89.907738] iSCSI:target_core_ep.c:782:ep_attach_hba RODSP plugin for epio is enabled. [ 89.915752] iSCSI:target_core_ep.c:789:ep_attach_hba ODX Token Manager is enabled. [ 90.861827] iSCSI:qla_dbg.c:2572:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.02.00.103-k. [ 91.442369] The mempool could be used by other devices [ 91.828782] ext2: synoboot1 mounted, process=syno_bios_log_c [ 91.859900] ext4: synoboot1 mounted, process=syno_bios_log_c [ 91.907407] vfat: synoboot1 mounted, process=syno_bios_log_c [ 91.991823] FAT-fs (synoboot1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 92.045526] synoboot1 unmounted, process=syno_bios_log_c [ 93.057033] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 98.575998] fuse: init (API version 7.32) Haswell, which is an old device, is said to be impossible to debug, but I am uploading the results of dmesg -w for reference. I tested it with the last test build you shared.

I would start with the RAM upgrade. Then use a new USB stick for the new loader and use the last known working settings from your 3615 loader (Sataportmap etc) and create a new loader. Also can you PM me the output of the command dmidecode ?

I'm sorry. I tried to translate all of Excel's Korean language, but some parts were missing. The contents are as follows. 디스크 일련번호 ( Disk sequence ) 디스크 이름 ( Disk Name) 유형 ( type ) I think maxdisks just needs to be kept above 22. I have not yet been able to compile the information explained by many people and turn it into my own knowledge. I am only following the explanation of wjz304, who has the most knowledge. I'd like to believe that's the way to prevent confusion. The file in charge of adjustment in Redpil is user_config.json. Corresponds to the ITEM of the extra_cmdline element. When SataPortMap / DiskIdxMap / SasIdxMap is recorded, this information is passed to synoinfo.conf Corresponds to ITEM of another element, synoinfo I understand that when maxdisks / internalportcfg / esataportcfg / usbportcfg are recorded, this information is also passed to synoinfo.conf. As for internalportcfg / esataportcfg / usbportcfg, I am still in a position to check it, so I am not sure if it is accurately transmitted to synoinfo.conf.

I discovered with 16 disks my esataportcfg and internalportcfg values were overlapping when converted to binary. I decided to edit the setup for 20 total drives with 20 internal ports in case I swap out my 9211-8i for a 9300-16i (would that just work by the way?) as I have assumed the esata ports mentioned here are in fact my onboard SATA controller ports? I'm not sure how to manage the SATA disk side of things though and forgotten where to do that sataportmap and diskid tinkering.

Oh, sorry for my misunderstanding, you need to set DiskIdxMap and SataPortMap

1. As for the VGA resolution compatibility issue, I understand that ARPL already has a menu prepared. I hadn't thought about it since no users had requested it so far. I will prepare the same menu for TCRP as for ARPL. 2. EFI and legacy issues must be handled separately from Boot and Storage. Perhaps the EFI needed to boot the loader can be pointed to UEFI USB partition 1 in the BIOS. You can choose whichever works well among Legacy/EFI. For storage, legacy mode is recommended, especially for HBA. This is something I also heard from other experts. They said that legacy mode passes through the SAS controller's own BIOS check section, giving it time to accurately recognize the disk. 3. If you are trying to utilize both the HBA and SATA controller ports, it will be difficult for me to give you an accurate guide. This is the setting value when using multiple disks in the HBA recommended by @flyride [HBA Recommended settings from flyride] Not EUDEV , Use Only DDSML (If you use TCRP-mshell ) "SataPortMap": "12", "DiskIdxMap": "1000", "SasIdxMap: "0" "MaxDisks: "24" Sata controllers will not be considered. Once these recommended settings are maintained, a guide pop-up is provided in MSHELL that you can refer to to adjust SataPortMap / DiskIdxMap for the Sata controller. This function is also taken from ARPL. If you use x "Show Sata(s) # ports and drives" in the main menu, you can see the guide pop-up as shown below. You must learn how to decipher and utilize this content. It's been a while since I learned how to decipher this too. I think it would be good to look at this map and learn more together. If possible, I will try to configure an environment similar to your situation by combining HBA / SATA.

In the VM, it is forced not to set any values to SataPortMap and DiskIdxMap, which is recommended by TTG. If there is no value, it dynamically searches for the SATA PORT setting. Unless there is a special reason, the default setting to increase the success rate for beginners is to leave these two values blank. If you absolutely need to modify it, you should use "e" as you discovered.

I was able to get all my instances of 7.1.1 updated to 7.2.1 pretty smoothly using that method. In fact, I changed loaders and re-built to 7.2.1 all in one step to save time, and that worked okay. The only hiccup I noticed when using your loader is that the SataPortMap and DiskIdxMap values set in your loader or even by manual editing of the user_config.json file are NOT saved when building the loader. After the build, both those values in the user_config.json file are reset to nothing and just show "". And when rebooting to boot into DSM, the loader SATA boot options line also shows no set values for these. I have to hit "e" add them in that screen manually to the SATA boot line, and then it seems to save them and use them in the future. Why would setting them in your loader build settings or user_config.json before build not be honored and actually save the values for use when booting DSM?

[HBA Recommended settings from flyride] Not EUDEV , Use Only DDSML (If you use TCRP-mshell ) "SataPortMap": "12", "DiskIdxMap": "1000", "SasIdxMap: "0" "MaxDisks: "24"

Hi all, This is my first attempt at installing Xpenology, I have a DS918+ for my own use and would like to convert an old Windows Home Server for a family member. I'm guessing the drivers for CN896 North Bridge or VIA VT8251 South Bridge are not loaded, it's picked up one of them as "JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)" but I'm not sure how to proceed. Motherboard: VIA EPIA SN 18000G with 4GB DDRII 667 CPU: VIA C7 1.8GHz NanoBGA2 processor with FSB 800 MHz 4 S-ATA II connectors VIA CN896 North Bridge VIA VT8251 South Bridge http://cdn.viaembedded.com/eol_products/docs/epia-sn/operating_guide/OG_EPIA-SN_v1.10.pdf I have 4 1TB SATA 3.5" drives connected but only two are showing - any idea how I can add the other two? I used win32diskimager-1.0.0-install.exe to install tinycore-redpill.v0.9.4.9.img ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb Found MEMUP SerialNumber: 077B15B105A3 Vendor ID : 0x13fe Product ID : 0x1e20 Should i update the user_config.json with these values ? [Yy/Nn] ./rploader.sh serialgen DS3622xs+ Interface selected : eth0 Serial Number for Model = 20C0SQRLJFDVP Mac Address for Model DS3622xs+ = 00:11:32:AC:B8:D2 Should I update the user_config.json with these values ? [Yy/Nn] ./rploader.sh satamap Found "02:00.0 JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)" Detected 2 ports/2 drives. Override # of ports or ENTER to accept <2> 4 Non-numeric, overridden to 0 Computed settings: SataPortMap=1 DiskIdxMap=00 Should i update the user_config.json with these values ? [Yy/Nn] n OK remember to update manually by editing user_config.json file ./rploader.sh build ds3622xsp-7.2.0-64570 DSM_DS3622xs+_64570.pat ./rploader.sh backup ./rploader.sh backuploader exitcheck.sh reboot

Добрый день! Dual-Core AMD Opteron(tm) Processor 2212 Встроенный SATA Marvell. В БИОС выставляется только режим АТА. Использовал несколько загрузчиков. ARPL, ARС, TCRP - Загрузка доходит до Booting the kernel. Захожу по IP:5000 но диски не находятся "No Drives Detected". Также пробовал RAID контроллер, но результат такой же. --------------------------------------={ TinyCore RedPill Friend }=-------------------------------------- TCRP Friend Version : 0.0.9 0.0.8g Added retry processing when downloading rp-lkms.zip of ramdisk patch fails 0.0.8h When performing Ramdisk Patch, check the IP grant status before proceeding. Thanks ExpBox. 0.0.9 Added IP detection function on multiple ethernet devices IP Detecting on eth0 IP Address : 192.168.10.121, Module Processing Method : DDSML Detecting upgrade : Ramdisk OK ! zImage OK ! Checking for latest friend -> OK, latest Loader BUS: usb Running on 4 Processor Dual-Core AMD Opteron(tm) Processor 2212 With 1.9G Memory System has 0 SAS/RAID HBAs and 2 Network cards System is running in Legacy boot mode Model : DS723+, Serial : 2270TQRMAXPFL, Mac : 00188B77519C, DSM Version : 7.2.1-69057, Update : 0, RedPillMake : prod zImage : /mnt/tcrp/zImage-dsm initrd : /mnt/tcrp/initrd-dsm cmdline : withefi disable_mtrr_trim=1 earlyprintk syno_hw_version=DS723+ console=ttyS0,115200n8 netif_num=2 synoboot2 pid=0xc95a earlycon=uart8250,io,0x3f8,115200n8 mac2=00188B77519D mac1=00188B77519C sn=2270TQRMAXPFL SMBusHddDynamicPower=1 vid=0x125f elevator=elevator loglevel=15 DiskIdxMap vender_format_version=2 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 Access http://192.168.10.121:7681 via the TTYD web terminal to check the problem. (If you have any problems with the DSM installation steps, check the /var/log/linuxrc.syno.log file in this access) Default TTYD root password is blank До загрузки DSM root@tcrpfriend:~fdisk -l Disk /dev/sda: 3.76 GiB, 4040748544 bytes, 7892087 sectors Disk model: USB Flash Drive Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xf110ee87 Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 147455 145408 71M 83 Linux /dev/sda2 147456 301055 153600 75M 83 Linux /dev/sda3 301056 2097151 1796096 877M 83 Linux Disk /dev/sdb: 3.64 TiB, 4000787030016 bytes, 7814037168 sectors Disk model: HGST HDN724040AL Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: 8BBD78AE-5304-BB4C-963E-4B8EC06708DB Disk /dev/sdc: 3.64 TiB, 4000787030016 bytes, 7814037168 sectors Disk model: HGST HDN724040AL Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: B1990E24-817F-414D-9CB4-D38AD70E2428 root@tcrpfriend:~# После загрузки "Junior mode" SynologyNAS> lspci -k 0000:00:01.0 Class 0604: Device 1166:0036 0000:00:02.0 Class 0600: Device 1166:0205 Subsystem: Device 1166:0201 0000:00:02.2 Class 0601: Device 1166:0234 Subsystem: Device 1028:01eb 0000:00:03.0 Class 0c03: Device 1166:0223 (rev 01) Subsystem: Device 1028:01eb 0000:00:03.1 Class 0c03: Device 1166:0223 (rev 01) Subsystem: Device 1028:01eb 0000:00:03.2 Class 0c03: Device 1166:0223 (rev 01) Subsystem: Device 1028:01eb Kernel driver in use: ehci-pci 0000:00:04.0 Class 0300: Device 1002:515e (rev 02) Subsystem: Device 1028:01eb 0000:00:07.0 Class 0604: Device 1166:0140 (rev a2) Kernel driver in use: pcieport 0000:00:08.0 Class 0604: Device 1166:0142 (rev a2) Kernel driver in use: pcieport 0000:00:09.0 Class 0604: Device 1166:0144 (rev a2) Kernel driver in use: pcieport 0000:00:0a.0 Class 0604: Device 1166:0142 (rev a2) Kernel driver in use: pcieport 0000:00:0b.0 Class 0604: Device 1166:0144 (rev a2) Kernel driver in use: pcieport 0000:00:18.0 Class 0600: Device 1022:1100 0000:00:18.1 Class 0600: Device 1022:1101 0000:00:18.2 Class 0600: Device 1022:1102 0000:00:18.3 Class 0600: Device 1022:1103 0000:00:19.0 Class 0600: Device 1022:1100 0000:00:19.1 Class 0600: Device 1022:1101 0000:00:19.2 Class 0600: Device 1022:1102 0000:00:19.3 Class 0600: Device 1022:1103 0000:01:00.0 Class 0200: Device 14e4:1659 (rev 21) Subsystem: Device 1028:01eb Kernel driver in use: tg3 0000:02:00.0 Class 0200: Device 14e4:1659 (rev 21) Subsystem: Device 1028:01eb Kernel driver in use: tg3 0000:03:0d.0 Class 0604: Device 1166:0104 (rev c0) 0000:03:0e.0 Class 0101: Device 1166:024b Subsystem: Device 1028:01eb 0000:06:00.0 Class 0604: Device 8086:032c (rev 09) 0000:07:08.0 Class 0100: Device 1000:0054 (rev 01) Subsystem: Device 1028:1f06 Kernel driver in use: mptsas 0001:01:00.0 Class 0106: Device 1b4b:9235 (rev 11) SynologyNAS> SynologyNAS> fdisk -l Disk /dev/synoboot: 3853 MB, 4040748544 bytes, 7892087 sectors 1018 cylinders, 125 heads, 62 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/synoboot1 * 0,32,33 9,45,36 2048 147455 145408 71.0M 83 Linux Partition 1 has different physical/logical start (non-Linux?): phys=(0,32,33) logical=(0,33,3) Partition 1 has different physical/logical end: phys=(9,45,36) logical=(19,3,20) /dev/synoboot2 9,45,37 18,188,42 147456 301055 153600 75.0M 83 Linux Partition 2 has different physical/logical start (non-Linux?): phys=(9,45,37) logical=(19,3,21) Partition 2 has different physical/logical end: phys=(18,188,42) logical=(38,105,46) /dev/synoboot3 18,188,43 130,138,8 301056 2097151 1796096 877M 83 Linux Partition 3 has different physical/logical start (non-Linux?): phys=(18,188,43) logical=(38,105,47) Partition 3 has different physical/logical end: phys=(130,138,8) logical=(270,75,2) SynologyNAS>

Probably you are using 2 USB sticks before/after. In fact, the only items that need to be imported from the previous stick are Synology SN, SataportMap DiskIdxMap, etc. An easy way is to take good notes and then copy them down in the same way.

for me doesn t work on esxi 7 u3 ds3622xs+ can t find disks i edit the user config manual sataportmap 1 and diskidxmap 0A00 sata 0 0.0 sata1 1.0 doesnt work cant find disks 3 days ago work with ds1823xs+ i start the vm and look to the user config the network cars stay the same but sataportmap and diskidxmap go back to """, look like after i made changes manual and after i build and reboot don t keep what i change

Thanks for your reply! Tried directly again with SATA1 (0:0) and (0:1), but still no luck. Out of ideas, I deleted SATA Controller 1 and moved storage disk to SATA0 (0:1) and now I am able to install DSM. Could it be something with SataPortMap/DiskIdxMap? I don't know. My production VM has a LSI2008 attached via passtrough, but I still read about problems with mpt3sas. I think it's a good idea to stick at 7.1.1 for some time.

TCRP is another REDPILL loader that is the basis of ARPL. The loader and installed DSM never invade the data partition area. It is involved in the system partition. Have you completed installing DSM 7.2 U3 using ARPL? If so, if you change the loader to TCRP, the process of restoring to 7.2 U3 will appear once. After that, you will reach the top. Don't be surprised by this. This is the recommended setting for the combination of DS3622xs+ and HBA. Please set as below. Please feel free to choose the bay size. Not EUDEV , Use Only DDSML "SataPortMap": "12", "DiskIdxMap": "1000", "SasIdxMap: "0" "MaxDisks: "24"

Hi Guys, Today I'm trying to install a vmware Xpenology nas. The vmware server is ESXI 6.7 u3. The motherboard is supermicro x9sri-f-0. There is a 4 ports SCU controller on this board. I passthrough this controller to vm guests. I tried it in window 10 and ubuntu 20. The SCU controller shows in both system and the 4 disks could be used. While in the Xpenology NAS, the DSM installation is successful, except the SCU controller won't show. The load is Tinycore-Redpill, I downloaded the loader from https://github.com/pocopico/tinycore-redpill I followed the instruction of The diskstation is DS3622xs+ and DSM version is 7.1.1. And I think the passthrough to the Xpenology vmware is successful because if I boot to "tinycore image build", and run fdisk -l, I saw the 4 disks. And if I run "satamap", the output shows: Found "02:01.0 Vmware SATA AHCI controller" 30Ports/1 drives. Mapping SATABOOT drive after max disks. Found "02:02.0 Vmware SATA AHCI controller" 30Ports/1 drives. Default 8 virtual ports for typical system compatibility. Found SCSI/HBA" 03:00.0 Intel Corporation C602 chipset 4-Port SATA Storage Control Unit(rev 06)" (4 drives) I did try to play with SataPortMap and DiskIdxMap. But I couldn't get these disks show in DSM. Then I also ssh to the DSM and run lspci, I found a PCI passthrough device without driver. So I'm just wondering. Do I need SCU driver for DSM to get the disks show? I have to install the driver for windows 10 and ubuntu seems support it by default. How about DSM 7.1.1? Does it have the driver? BTW, I also have another two general question regarding use TCRP loader. 1. After modified user_config.json, do I need to rebuild the loader to make it take effect? I rebuilded every time. Just want to confirm it's must. 2. After rebuild the loader, do I need to reinstall DSM to make the changes take effect? I guess it shouldn't need to but I still reset the DSM and reinstall. However no luck to get the disks show. Thanks

oh, I found the solution they need to edit sataportmap in loader

Yes, my suggestion is to abandon SataPortMap and DiskIdxMap, If there are any issues, they can be improved by modifying internalportcfg, esatportcfg, usbportcfg, and maxdisks

without it i cannot use internal ports on motherboards... for me SataPortMap=68 works correct (6x ports on motherboards, 8x ports from H310)

The calculation of SataPortMap and DiskIdxMap should be combined with the specific information of the controller, rather than WYSIWYG. The table above calculates internalportcfg, esatportcfg, usbportcfg, and maxdisks. recommended not to set SataPortMap and DiskIdxMap

@wjz304 and that is solution for my issue. It looks like DS3622xs+ has limit to 12 drives. I changed internal/esata/usbportcfg to 24 drives and now i see all my disks 1-6 - internal sata ports on motherboard 7 - empty? i dont know what is it and why is it here? 8-15 - 8 drives from H310 SataPortMap=68 DiskIdxMap=0000

Hi @shibby This is interesting. So since i have 4 Disks on the LSI 9211-4i what should I try and use ? I am using the below: "DiskIdxMap": "1000", "SataPortMap": "12", "SasIdxMap: "0", "MaxDisks: "16"

I built another baremetal with H310 IT-mode (latest DS3622xs+ with Friend). When i set as you mention then i see all 8 drives connected to H310 but i also have 2 drives connected to motherboard (sata1 and 2) and those 2 drives has not been detected. In default configuration (DiskIdxMap=0, SasIdxMap=0 SataPortMap) 2 drives connected directly to motherboard are detected as bay 1 and 2 but not all drives connected to H310 are detected - it shows only 5 drives in bay 8,9,10,11,12 - it looks like channels are duplicated (channel A - 8,9,10,11 and channel B - 9,10,11,12). I tried a lot of "DiskIdxMap & SataPortMap" combinations and always some of drives has not been detected. I don`t understand "logic" of those two variables but FINALLY with: DiskIdxMap=0011 SataPortMap=24 SasIdxMap=0 MaxDisks=24 all drives has been detected - maybe not perfectly but it works!! 1-2 bay - motherboards sata 1 and 2 3 bay is empty? 4-11 bay - 8 drives connected to H310 BUT for test i connected another drive... to sata6 port on motherboard, then all H310`s drives disapper only sata1&2 has been showed. WTF... if I understand correctly SataPortMap=xyz means: - x - numer of sata port on 1st controller - y - numer of sata port on 2nd controller - z - numer of sata port on 3rd controller ... So in my example should be 68 (6 ports on internal controller and 8 ports on H310). But how to understand DiskIdxMap?? How should i set it?

I solved this problem by changing the model to DS920+ which uses device tree for drive slot mapping. Now external USB drives are treated as so and not as fixed drives, and they appear as usb_share shared folder. But this model loader has support only for SATA controller, No support for SCSI/HBA controllers which means DSM cannot see drives attached to SCSI/HBA controllers. But that was fine in my case since I use SATA only. Despite this I'm still waiting for a solution to other models using sataportmap/diskidxmap slot mapping like DS3622xs+.

so i eventually got everything working.... i ended up running TCRP and it correctly worked out sataportmap=1 / diskidxmap=0, i got a recovery screen upon boot, and am now repairing the various broken apps/user permissions due to the 6.22>7.0.1 upgrade i'll have a crack at a full howto once i get a moment, but might have to wait till i get back off holiday