DSfuchs
-
Posts
239 -
Joined
-
Last visited
-
Days Won
4
Everything posted by DSfuchs
-
done
-
This is exactly the confirmation for me: The most precise and sophisticated machine translator in the world DeepL is three times more accurate than its direct competition. Deepl is from Germany too, I didn't know him yet. Thanks for the tip.
-
For me, it reads excellently in Germany.
-
I use this software to save/write a DOM image: https://www.alexpage.de/download/usbit/usbit.zip Option to be set for handling a DOM:
-
First, it must be determined whether the DOM is working and, if so, whether files are missing or need to be overwritten. There is also an individual device file that enables the unique DSM license purchased with the device to be used. And of course it would be easier and quicker to flash your DOM backup if you had created it beforehand. But it is possible to reconstruct everything. If you can still create an image of your DOM, I can happily check and if applicable can give you tips on reconstruction.
-
We just re-flashed the internal FLASH drive. A cable such as EAN: 4043718082452 is required. If the hardware is defective, you can use a suitable USB stick for it that is plugged into the front socket.
-
As far as I know, I also had it with DSM7. When I get home, I'll check again with the latest DSM7.
-
No, the CPU usage problem will always arise sooner or later depending on the usage of applications. That could even be half an hour later. There is no installation where this is not the case. The system throughput, CPU and RAM, drops by approximately 80% to 20% performance. For example, installing the JAVA package does not take 2, but rather 15 minutes. Scrolling through the inbox in the mail station doesn't take a maximum of 1 second, but almost 5.
-
If the original DOM has died, it is much more complicated because it can come unprepared without backup and replacement hardware. The data cannot be restored from a PAT file. Firstly, because files are missing, and the individual license file has also been lost. For example, I can reconstruct the license file, but you may need a friendly stranger for the bootloader of your Synology model, or you can build a new one from a model of the same CPU family if you have such a device.
- 306 replies
-
- 1
-
-
- firmware
- 08-0220usb14
- (and 4 more)
-
That's why the downgrade to update 5 is necessary.
-
I don't overwrite the files at all. I create a directory (in mc with F7) such as DSM6.2.4u7 and move (in mc F6) the files there for possible recovery. First change to this directory as the target on one page of the mc. There is absolutely nothing wrong without a downgrade if nothing essential has been defined on the hard drive anyway. In any case, no MACs are defined for other Ethernet interfaces. To do this you would have to expand the vender file to include this.
-
Hello, yes if the motherboard has 2 slots for RAM, then 3GB is also great. I was under the assumption that only RackStations had this. With my RS812+ it was just a matter of finding the right combination of memory module manufacturers. 2x original Synology didn't work. And yes, with #35 it is very easy to change the model in 10 minutes, including a restart and without screwdriver.
- 306 replies
-
- 1
-
-
- firmware
- 08-0220usb14
- (and 4 more)
-
I hope you only have a maximum of 2GB RAM. Otherwise, the device is only suitable as a door stop
-
Hello, don't you know anyone who can help with a simple backup. Which model should it be?
-
Unfortunately no.
-
Have you ever thought about this?
-
No, the CPU architecture must be at least identical.
-
No, you didn't destroy anything. Just keep calm and stay on the ball. It can take a good 5 minutes until the Synology is visible.
-
It's not your router that has to see the device, but you with the Synology Assistant. Or by: https://find.synology.com/
-
Where does the info “Generic” and “Mass Storage” come from? "B07DC.." is the serial number. Did you recognize #253: change the device name to "Diskstation".
-
Unfortunately I only got a snippet. But what is seen is not right. It should look like mine.
-
Please send me a screenshot out of the temple.exe display of your modified Alcor dongle.
-
To restore the VERSION file, I would use a 2nd DSM installation. So remove all drives and reinstall a free/empty hard drive, may be an old laptop drive, in slot 1 (far left) with DSM. Then insert the first/leftmost of the removed hard drives into the 2nd slot during operation. Don't put together hard drives online or anything like that! Then make the system partition available via SSH/root via the point "/mnt": mount /dev/sdb1 /mnt cd /mnt/etc.defaults Copy a working VERSION here, from the new DSM or it's share, or repair it using the editor "vi". power off 1. Remove the spare hard drive form slot 1, 2.=>1 and switch it on again to test. The data volume will be missing, but if DSM boots up properly it will be there again with all disks when you restart.
-
Have you ever tried to reinstall your internal flash module as DS1515+ using the original image?
-
This one would not work together with the "Alcor Change PIDVID Rework 1.0.0.2" tool. You will find the items in the German marketplace ebay.de
